Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[user1988]

what driver can I use to control the fans at a fixed speed

[1715055876]

1715055876

[1715055876]

1715055876

[1715055876]

1715055876

[1715055876]

1715055876

[shuweee]

does anyone have issue with 11.2? every so often, i would encounter GPU disabled error, along with OpenCL. To counter that i'd attempt to add -r 60 to the bat to restart each hour. Is that normal that it need to re-jiggle every 60 mins?

using Win10, GTX 1060 6gb, OC +850 mem.

Any thoughts is greatly appreciated.

Yeah, +850 mem is not stable on any miner. Also the gains from +720 and even from very stable +650 are not big enough to counteract the downtime you get from killing your gpus.

Actually, depending on who made the GDDR5 memory, recently built 6GB 1060's all run at +800 memory clock or more.  My new one has been running at +1000 (effectively 2000) since the day I got it and hashes about 15-20% better there than with the default setting.  I have Hynix memory, and since about August GTX 1060 cards made have all had RAM intended to run at 11M instead of 8, so it probably can take more but +1000 is the software limitation of the drivers.  (per the author of "nVidia Inspector" and "Profile Inspector")

Mine's are all GDDR5 Samsung. POWR 65% MEM +785 seems to be stable, no more weird reboot & crashes. slowly tweaking. getting about average +- 24.1Mh/s per card. tempting to add RX580 8G rather as BIOS flash can push it to 29 Mh.

[patofet]

Can I use somethink to detect when claymore can't connect to the pool and change it? because with epools.txt can you only change pool and not wallet?

[The_Fist]

Claymore is working excellent for me, so firstly...thanks!

I would like to mine single ETH mode but use two or more different wallets changing automatically.

Example:
Wallet 1 mines for 11 hours of the day
Wallet 2 mines for 11 hours of the day
Wallet 3 mines for 2 hours of the day

Can this be done easily with claymore or perhaps some windows batch file to open and close miners based on time.  Thanks for you help!

You can do that in Windows. Something like

:loop
start program1
timeout /t certain period
taskkill /im  "program1" /f

start program2
timeout /t certain period2
taskkill /im  "program2" /f

start program3
timeout /t certain period3
taskkill /im  "program3" /f

goto loop

Awesome!!! Its working, I ended up changing it a bit but the general layout is exactly what I wanted!  Thank you very much!

[Swiped]

Any one know what the hell is going on with Dwarfpool?  Getting no feedback for the past 8 hours.

[phieudu2601]

Hello everyone,
I have just bought some GPUs, Radeon RX470 x 6. I intended to mine ETH, after configuration on MSI Afterburn application I always got this issue below:
3:37:28:438 1308 OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
23:37:28:454 1308 OC v7, Reset control for GPU 1, close miner right now if you want to use default control from Catalyst
23:37:28:454 1308 OC v7, Reset control for GPU 2, close miner right now if you want to use default control from Catalyst
23:37:28:469 1308 OC v7, Reset control for GPU 3, close miner right now if you want to use default control from Catalyst
23:37:28:469 1308 OC v7, Reset control for GPU 4, close miner right now if you want to use default control from Catalyst
23:37:28:485 1308 OC v7, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst
My mainboard used to hoar, then my rigs automatically shut down.
I don't why, hope someone can help me.
Many thanks.

[bennybgood]

Haven't tired th Adreniline 18.3.1 drivers but the 18.2.2 drivers are working with 11.2 for setting the overclock/undervolt/fan settings in Claymore and are very stable.

https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Adrenalin-Edition-18.2.2-Release-Notes.aspx

Good to know, thanks. This is what i wanted to hear.

Can you remind me of the process?

-Uninstall previous drivers
-Install new ones
-Something to do with driver signatures or updating for flashed bios?!? Sorry, can't remember...
-Install latest Claymore

[idunno1987]

Having a bit of trouble here, trying to dual mine ETH/XVG with claymore 11.2(literally started mining yesterday, was doing ETH & Dcred, but dcred wasnt worth it for me, but I learned how to hook up to supernova)

Anyway. Im getting constant rejected shares on XVG with suprnova x17....Is there something im missing with my settings?

-epool us1.ethermine.org:14444
-ewal wallet address
-epsw x
-dpool stratum+tcp://xvg-x17.suprnova.cc:7477
-dwal username.workername (with supernova you dont put the address as with dcred?)
-dpsw workerpassword
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0

Please let me know

Thanks

[Munka9]

Having a bit of trouble here, trying to dual mine ETH/XVG with claymore 11.2(literally started mining yesterday, was doing ETH & Dcred, but dcred wasnt worth it for me, but I learned how to hook up to supernova)

Anyway. Im getting constant rejected shares on XVG with suprnova x17....Is there something im missing with my settings?

-epool us1.ethermine.org:14444
-ewal wallet address
-epsw x
-dpool stratum+tcp://xvg-x17.suprnova.cc:7477
-dwal username.workername (with supernova you dont put the address as with dcred?)
-dpsw workerpassword
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0

Please let me know

Thanks

Wrong algorithm. You need a Blake 2s algorithm pool.

Mine.nlpool.nl or luckypool.xyz are the only 2 I've used that seemed honest (there may be others now).

[tg88]

Can I use somethink to detect when claymore can't connect to the pool and change it? because with epools.txt can you only change pool and not wallet?

You can change the wallet without problems, see the example:

POOL: us1.ethermine.org:4444, WALLET: 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorker, PSW: x, ESM: 1, ALLPOOLS: 0

[Flickspeed]

@claymore

Dear Claymore,

Please tell us, is the miner actually 0.3 to 0.4 MHs slower under linux vs Windows for AMD Polaris cards? It seems that way for all rigs at equal settings.

[g_h_a_p_naya]

Hello Claymore.
sometimes when miner start to mine the monitor blink once or twice and miner don't set the DAG file and then shows the address of miner and nothing happen until i reset the system or miner, even sometimes it happen again if i start again the miner.
what's the reason of this problem ?
when it's happen nothing mine and the rig dosnt reset.

[tenmoi]

Having a bit of trouble here, trying to dual mine ETH/XVG with claymore 11.2(literally started mining yesterday, was doing ETH & Dcred, but dcred wasnt worth it for me, but I learned how to hook up to supernova)

Anyway. Im getting constant rejected shares on XVG with suprnova x17....Is there something im missing with my settings?

-epool us1.ethermine.org:14444
-ewal wallet address
-epsw x
-dpool stratum+tcp://xvg-x17.suprnova.cc:7477
-dwal username.workername (with supernova you dont put the address as with dcred?)
-dpsw workerpassword
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0

Please let me know

Thanks

Wrong algorithm. You need a Blake 2s algorithm pool.

Mine.nlpool.nl or luckypool.xyz are the only 2 I've used that seemed honest (there may be others now).

Are you mining on Nlpool? I saw my wallet getting some nevas and infocoins, so I asked the admin. He said he’d exchange them to verge for me. Do you think it fishy?

[leonix007]

Is there another solution, because it worked fine before the windows defender update, without this plug

Hello

I have a rig with 4 rx570 GPU, it worked fine, and i handled it with teamviewer, because i havn't a screen plugged on it.

 but after a windows bitdefender update, i have a strange problem, my hashrate dropped to 16mh/s, so i reinstalled the drivers.

My problem is:

claymore's doesn't work until i plug my rig to a screen.

any idea please??

regards

Then plug cable into the rig GPU 0

If just a cable does not work (did not work for me) use a dummy plug
https://www.amazon.com/Headless-Display-Emulator-Headless-1920x1080-generation/dp/B06XT1Z9TF

Your windows update messed up with your GPU drivers, try to run DDU and install Adrenalin drivers, ensure that you set it to compute mode. if still not solved I guess you consider rolling back your windows in case you don't want a dummy plug.

[tmc1989]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

Hello torrespr77,

Special designed AMD driver? Do you mean blockchain driver? https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx Mod mobo bios or each GPU? Because I have no idea what is the issue for this one. I dont found any tutorial by BurierOne.

What driver are you using if there are the new ones have you got all GPU in compute mode

If you want to learn how to mod just Google and you will find a lot of tutorials

Now I using the latest driver from sapphiretech. Now I have no idea why my 5 GPU are low hasrate which around 17.xx mhs and only 1 GPU at 25.xx mhs. I googled around but can't find any solution to fix it.

have you got all GPU in compute mode

Now I have changed all GPU in compute mode. I test run Claymore v11.2 and get 25.xx mhs, I haven't mod bios and OC yet. If I mining 30-60 minutes, my RIG will short circuit. And if I set the memory clock to 2200, RIG will totally hang after some times.

[goodbitprofit]

Hello guys,
I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?
Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

Hello torrespr77,
Special designed AMD driver? Do you mean blockchain driver? https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx Mod mobo bios or each GPU? Because I have no idea what is the issue for this one. I dont found any tutorial by BurierOne.

What driver are you using if there are the new ones have you got all GPU in compute mode

If you want to learn how to mod just Google and you will find a lot of tutorials

Now I using the latest driver from sapphiretech. Now I have no idea why my 5 GPU are low hasrate which around 17.xx mhs and only 1 GPU at 25.xx mhs. I googled around but can't find any solution to fix it.

have you got all GPU in compute mode

Now I have changed all GPU in compute mode. I test run Claymore v11.2 and get 25.xx mhs, I haven't mod bios and OC yet. If I mining 30-60 minutes, my RIG will short circuit. And if I set the memory clock to 2200, RIG will totally hang after some times.

Are you trayed to change the raiser ? All set or just that small connect with MB ?

[leonix007]

my RIG will short circuit. And if I set the memory clock to 2200, RIG will totally hang after some times.

Dude, Clocking won't do short circuits, otherwise your Rig already burnt down

Overclocking too much with 2200 for Stock cards cant handle it, btw whats your PSU rating?

[tmc1989]

Hello guys,
I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?
Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

Hello torrespr77,
Special designed AMD driver? Do you mean blockchain driver? https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx Mod mobo bios or each GPU? Because I have no idea what is the issue for this one. I dont found any tutorial by BurierOne.

What driver are you using if there are the new ones have you got all GPU in compute mode

If you want to learn how to mod just Google and you will find a lot of tutorials

Now I using the latest driver from sapphiretech. Now I have no idea why my 5 GPU are low hasrate which around 17.xx mhs and only 1 GPU at 25.xx mhs. I googled around but can't find any solution to fix it.

have you got all GPU in compute mode

Now I have changed all GPU in compute mode. I test run Claymore v11.2 and get 25.xx mhs, I haven't mod bios and OC yet. If I mining 30-60 minutes, my RIG will short circuit. And if I set the memory clock to 2200, RIG will totally hang after some times.

Are you trayed to change the raiser ? All set or just that small connect with MB ?

Don't understand what you mean..

[Teress]

@claymore

Dear Claymore,

Please tell us, is the miner actually 0.3 to 0.4 MHs slower under linux vs Windows for AMD Polaris cards? It seems that way for all rigs at equal settings.

I see the same problem. Same settings under Linux it is just mining about 0.5 slower I would like oto know why and how to avoid it.

[Teress]

I wanted to try after years again dwarfpool to see how it performs. Claymore connects and mine ok. But after mining there for about an hour I am still getting on their site error NO ACCOUNT "(no shares or wrong letter used, check lower-/uppercase)" when trying to view my statistics. Using claymore with no worker setup. Can someone explain me, what am I doing wrong? I don't get it. I tried also to mine with all letters to lowercase:
My setup:
-epool eth-eu.dwarfpool.com:8008 -ewal 0x40E83FF7c08Ae44F0F243Fde22d0A9D59fA6D514 -epsw x
Tried also:
-epool eth-eu.dwarfpool.com:8008 -ewal 0x40e83ff7c08ae44f0f243fde22d0a9d59fa6d514 -epsw x

Thanks a lot....