Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Omg9500]

Hello,

i am mining with claymoreminer ETH only, mining works fine but i do not receive the ETH in my wallet.

Do you see any mistakes here?

BR Cryptmaniac

https://ibb.co/cUE2k7
https://ibb.co/ks8ZyS

Most pools have a min. payout hurdle.... I am on Nanopool and there for example the min. payout is 0.2 ETH. Could that be the reason?

[1714898970]

1714898970

[bitdag]

Hi all, testing 11.3 for now it is great...3 1070 nvidia, 3 rx550 and 6 rx580 all fıne and +2 mh total..thx for the good job guys

[Omg9500]

Hi all, testing 11.3 for now it is great...3 1070 nvidia, 3 rx550 and 6 rx580 all fıne and +2 mh total..thx for the good job guys

What is your total hashrate? I am running a rig with 13 RX580 cards and output on nanopool with Claymore 11.3 is 398.5 mh/s.... Phoenix 2.7c miner output is 396-397 mh/s.

[Saboor0]

Please help,

Code:

02:39:12:015	8effd700	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
02:39:12:411	cb707700	em hbt: 1, fm hbt: 65, 
02:39:12:411	cb707700	watchdog - thread 0 (gpu0), hb time 1592
02:39:12:411	cb707700	watchdog - thread 1 (gpu0), hb time 1714
02:39:12:411	cb707700	watchdog - thread 2 (gpu1), hb time 1791
02:39:12:411	cb707700	watchdog - thread 3 (gpu1), hb time 1670
02:39:12:411	cb707700	watchdog - thread 4 (gpu2), hb time 1787
02:39:12:411	cb707700	watchdog - thread 5 (gpu2), hb time 1665
02:39:12:411	cb707700	watchdog - thread 6 (gpu3), hb time 1555
02:39:12:411	cb707700	watchdog - thread 7 (gpu3), hb time 1676
02:39:12:411	cb707700	watchdog - thread 8 (gpu4), hb time 1595
02:39:12:411	cb707700	watchdog - thread 9 (gpu4), hb time 1716
02:39:12:411	cb707700	WATCHDOG: GPU error, you need to restart miner :( 

What is it and why does it restart the miner?

[Omg9500]

Looks like your GPUs are stalling/crashing which causes the watchdog to jump in. typically too much overclocking, undervolting or similar which causes your GPUs to crash.

[RuMiner]

Hello, @Claymore! Since it's getting warmer outside it would be fine to consider -ttli affect while rebooting by -minspeed. E.g. "-minspeed 10250" will reboot rig slower than 250Mh, but only if any of GPUs are throttling.

PS My previous problem is still there. New miner instance cannot take 3333 port after restarting in reboot.bat without actual rig reboot. Different rigs, different Windows installations, days of waiting - socket is busy anyway after "-minspeed" restarting. Also I noticed if I close miner with "X" button above, it shows "Quit, please wait..." for a while, after this sockets close immidiately. Maybe if you could execute procedures hidden in this "please wait" sign after minspeed detection, it will solve the problem?

PPS -dcri autodetection is great! Got +12 Mh from my rigs. Thanks! ) BTW, is best dcri different for different DAGs? Last year I was measuring best dcri for each GPU by myself, but yesterday realized all of them are wrong...

[bitdag]

Hi all, testing 11.3 for now it is great...3 1070 nvidia, 3 rx550 and 6 rx580 all fıne and +2 mh total..thx for the good job guys

What is your total hashrate? I am running a rig with 13 RX580 cards and output on nanopool with Claymore 11.3 is 398.5 mh/s.... Phoenix 2.7c miner output is 396-397 mh/s.

it is 308 mh...in 11.2 ver it was 306...my rig have 12 cards...
5 RX580
4 1070
1 1050 ti
2 RX550
when I try to to add 1 more RX550 cant adjust fan and OC with msiburner so I use 12 cards in my rig

[Saboor0]

Looks like your GPUs are stalling/crashing which causes the watchdog to jump in. typically too much overclocking, undervolting or similar which causes your GPUs to crash.

Thank you, I'll check on native settings.
They have been working on these since June 2017 and now these problems have started.
it was not before.

[R0land]

Thank´s  
my RX 550 makes 13.5Mh/s @30W , now.
Great job !

[LearningGuy]

RX550 runs now with 13.8 MH/s up from  11.2 MH/s. Thanks Claymore!

Is that the sapphire one?

Secondly have you tried dual with verge and if so, outcome?

[peterboy1]

effective hashrate has been greatly reduced with latest update. anyone else?

[Omg9500]

Hi all, testing 11.3 for now it is great...3 1070 nvidia, 3 rx550 and 6 rx580 all fıne and +2 mh total..thx for the good job guys

What is your total hashrate? I am running a rig with 13 RX580 cards and output on nanopool with Claymore 11.3 is 398.5 mh/s.... Phoenix 2.7c miner output is 396-397 mh/s.

it is 308 mh...in 11.2 ver it was 306...my rig have 12 cards...
5 RX580
4 1070
1 1050 ti
2 RX550
when I try to to add 1 more RX550 cant adjust fan and OC with msiburner so I use 12 cards in my rig

I had same problem with MSI afterburner. Then I switched to overdriventool.... https://bitcointalk.org/index.php?topic=2722646.msg27860694

[Viaggiatore]

thanks, i using it now, i see same v11.2

Is that more stable?

For me yes! 11.2 ws crashing like hell, didn't change anything and 11.3 is not crashing anymore

[Omg9500]

Looks like your GPUs are stalling/crashing which causes the watchdog to jump in. typically too much overclocking, undervolting or similar which causes your GPUs to crash.

Thank you, I'll check on native settings.
They have been working on these since June 2017 and now these problems have started.
it was not before.

Hi Saboor, nothing has changed? No drivers, No windows update, no claymore nor anything else? I that case maybe your GPUs were running to hot and now failing /crashing? That would be my only guessing if NOTHING else has changed....

[therock11]

effective hashrate has been greatly reduced with latest update. anyone else?

Yes, my RX580s are now 18Mh/s and my RX480s are now 14MH/s.  This is the same on 3 of my rigs.  I looking into how to revert the update or I'll blow these away and rebuild on a linux distro or Windows 7.

Updated: I went to settings and recovery and rolled back to the previous update.  I'm back to 33Mh/s and 30Mh/s.  Thanks Microsoft for your amazing fail.

[atomant]

Does claymore Dual miner work with these cards when installed with n NVidea 1050Ti?
https://www.ebay.com/itm/Nvidia-Tesla-on-Mars-m2090-gpu-6-gb-gddr5-384-bit-/183114411755?_trksid=p2385738.m4383.l4275.c10

[user1988]

I have a six 470 rig, modded BIOS with Claymore 11.2 and the following config:

-dcri 1
-cclock 1240
-mclock 2200
-cvddc 950
-tt 72
-fanmin 50
-fanmax 90
 
Does anyone know why I'm getting about 27MH/s for the 5 GPUs and 32MH/s for 1 of them?
The GPUs are identical and bought on the same batch.

what driver version?

[therock11]

Does claymore Dual miner work with these cards when installed with n NVidea 1050Ti?
https://www.ebay.com/itm/Nvidia-Tesla-on-Mars-m2090-gpu-6-gb-gddr5-384-bit-/183114411755?_trksid=p2385738.m4383.l4275.c10

Looking at the specs I'd think your power usage to mining efficiency wouldn't be worth it.

[Omg9500]

Does claymore Dual miner work with these cards when installed with n NVidea 1050Ti?
https://www.ebay.com/itm/Nvidia-Tesla-on-Mars-m2090-gpu-6-gb-gddr5-384-bit-/183114411755?_trksid=p2385738.m4383.l4275.c10

I don't think so... https://forum.ethereum.org/discussion/2815/mining-with-a-tesla-m2090

[Hodlmyhand]

Thanks for 11.3 claymore, much more stable than 11.2 so far, and the auto dcri option is very nice. Are you working on auto dcri option for dual mining? Also can I request more dual mine algorithms?  thanks