[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Fahim021]

It loads DAG file and then hangs. I have removed overlooking. Now let's see.
Also can anyone suggest me a better overclocking setting for p106? I used

Core clock 80
Memory clock 1600
Watt 80

Cards were not stable

This was rather better setting but the rig seem to restart after few hours

Core clock 80
Memory clock 1400
Watt 100

HI, i am using 13 p106-100 msi card in 1 rig.  Since last 2 days I am getting error "binary file (standard input) matches simple mining" very often and rig freezes. It doesn't restart itself. Kindly help !!

You need to  provide more information, this has no value, does the OS load? Does the miner start then fail?
Tough to help with out information.
If you have ANY overclocks, take them all out then reboot.

[twofreckles]

Hi Guys,
I can confirm that there is still an issue with overclocking Nvidia cards. I'm also getting the the below error.
Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect to unable to init server: Could not connect: Connection refused
However the error only seems to happen when I reboot the rig and then it only affects one or two cards per rig.
A fix is to go to overclocking and click save without changing anything and when the miner restarts everything works perfectly - until the next reboot.

I probably know whats causing it and i just need to make some fix in my script.
Anyway if i am thinking right then this issue is only on slow pendrives.

The dummy and temporary fix could be:
/root/utils/rclocal.sh
change 31 line from
  sleep 6
to
sleep 20

The Xorg is starting too slow on slow pendrives and thats probably the issue.
I have pretty fast ones so i dont have this issue and this explains why reloading fixes this problem.

I will make some checkups first before miner starts.

I can confirm it, overlocking is working again..

[FirstRigger]

Hi Guys,
I can confirm that there is still an issue with overclocking Nvidia cards. I'm also getting the the below error.
Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect to unable to init server: Could not connect: Connection refused
However the error only seems to happen when I reboot the rig and then it only affects one or two cards per rig.
A fix is to go to overclocking and click save without changing anything and when the miner restarts everything works perfectly - until the next reboot.

I probably know whats causing it and i just need to make some fix in my script.
Anyway if i am thinking right then this issue is only on slow pendrives.

The dummy and temporary fix could be:
/root/utils/rclocal.sh
change 31 line from
  sleep 6
to
sleep 20

The Xorg is starting too slow on slow pendrives and thats probably the issue.
I have pretty fast ones so i dont have this issue and this explains why reloading fixes this problem.

I will make some checkups first before miner starts.

I can confirm it, overlocking is working again..

Oh my God, please no more overLocking, we have problem enough with rigs. 

[chuck732]

Hi,
    May I ask how and where did you put this in SMOS?

/root/utils/rclocal.sh
change 31 line from
  sleep 6
to
sleep 20

Hi Guys,
I can confirm that there is still an issue with overclocking Nvidia cards. I'm also getting the the below error.
Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect to unable to init server: Could not connect: Connection refused
However the error only seems to happen when I reboot the rig and then it only affects one or two cards per rig.
A fix is to go to overclocking and click save without changing anything and when the miner restarts everything works perfectly - until the next reboot.

I probably know whats causing it and i just need to make some fix in my script.
Anyway if i am thinking right then this issue is only on slow pendrives.

The dummy and temporary fix could be:
/root/utils/rclocal.sh
change 31 line from
  sleep 6
to
sleep 20

The Xorg is starting too slow on slow pendrives and thats probably the issue.
I have pretty fast ones so i dont have this issue and this explains why reloading fixes this problem.

I will make some checkups first before miner starts.

I can confirm it, overlocking is working again..

Oh my God, please no more overLocking, we have problem enough with rigs. 

[citronick]

Try core 100, mem 800, PL 99

Zotac P106-100, Claymore 10, 22-23MHs

It loads DAG file and then hangs. I have removed overlooking. Now let's see.
Also can anyone suggest me a better overclocking setting for p106? I used

Core clock 80
Memory clock 1600
Watt 80

Cards were not stable

This was rather better setting but the rig seem to restart after few hours

Core clock 80
Memory clock 1400
Watt 100

HI, i am using 13 p106-100 msi card in 1 rig.  Since last 2 days I am getting error "binary file (standard input) matches simple mining" very often and rig freezes. It doesn't restart itself. Kindly help !!

You need to  provide more information, this has no value, does the OS load? Does the miner start then fail?
Tough to help with out information.
If you have ANY overclocks, take them all out then reboot.

[tytanick]

Update v1128
- changed start delay from 6seconds to 12seconds in nvidia rigs (temporay fix for slow usb and too slow initialisation). This shoudl fix some OC problems in some cases on Nvidia rigs
- changed verbose logging in xmr-stak-amd miner from 3 to 4 (more speed stats)

[StyriaTrading]

Hi,

I have a problem with undervolting - no setting is applied by my cards, it don't depends if it is 700 or 1000 mV, I have all the time the same wattage draw.

Heard that some other people also experience this problem. Can you give me a hint what can I do that my cards (Sapphire RX 570 Nitro + 4GB) are accepting the undervolting?

Thanks in advance.

[adore]

Hi,

I have a problem with undervolting - no setting is applied by my cards, it don't depends if it is 700 or 1000 mV, I have all the time the same wattage draw.

Heard that some other people also experience this problem. Can you give me a hint what can I do that my cards (Sapphire RX 570 Nitro + 4GB) are accepting the undervolting?

Thanks in advance.

have you ever tried to change voltage settings in other OS's or is this the first time you try this with SMOS? some cards just do not support this

[tflux99]

Hi,

I have a problem with undervolting - no setting is applied by my cards, it don't depends if it is 700 or 1000 mV, I have all the time the same wattage draw.

Heard that some other people also experience this problem. Can you give me a hint what can I do that my cards (Sapphire RX 570 Nitro + 4GB) are accepting the undervolting?

Thanks in advance.

maybe the voltage controller is incompatible with this undervolting method smos does in mey test it works have without bios tweaks arióund 2200watts with only bios voltage mods mods around 2000 watts and now with a little tests of the undervolting in smos i am down to 1850-1860 watts full 13 gpu rig with different card mix 3 x rx470 10x rx 570 brands powercolor msi and asus and iam mining ethereum + decred dual mining with claymore 10

[tflux99]

Hi,

I have a problem with undervolting - no setting is applied by my cards, it don't depends if it is 700 or 1000 mV, I have all the time the same wattage draw.

Heard that some other people also experience this problem. Can you give me a hint what can I do that my cards (Sapphire RX 570 Nitro + 4GB) are accepting the undervolting?

Thanks in advance.

have you ever tried to change voltage settings in other OS's or is this the first time you try this with SMOS? some cards just do not support this

all rx series cards should support it if your bios is ok in windows 10 and msi afterburner 4.4.0 beta 17 and latest drivers for me all cards are able to do voltage offset via msi afterburner max -96mv and i have 80 rx gpus from various brands alot of 470 and 480 not so many rx 570 or 580 they are so pricy hehe i had the luck to buy most of my gpus b4 the eth mining hype... so my god old rx 470 are the best crads hehe and even better is i bought most of them for just 160€ here in .de and the power consumption on most of my 470 is much better than on 570 and they have the same speeds just the rx 570 takes much more energy i think its cause of a lot of my 470 have just one 6 pin connector PCIE power not all but all of my 570 have 8 pin connector so 470 with 6 pin like powercolor rx 470 is best way to go for me in energy usage hehe sry 4 bad english

[StyriaTrading]

Hi,

I have a problem with undervolting - no setting is applied by my cards, it don't depends if it is 700 or 1000 mV, I have all the time the same wattage draw.

Heard that some other people also experience this problem. Can you give me a hint what can I do that my cards (Sapphire RX 570 Nitro + 4GB) are accepting the undervolting?

Thanks in advance.

have you ever tried to change voltage settings in other OS's or is this the first time you try this with SMOS? some cards just do not support this

Hi, I never tried it before - is there some basic setting I have to change if I want to do the undervolting? For example Mainboard BIOS or something else?

[crypik]

I have it running but it likes to reboot it self alot. so far to day 18 times. The overclocking is messed up doesn't do crap. Dam it just rebooted while I'm typing this.

Here this might help you but not me. It's a guide.

https://docs.google.com/document/d/1SvtkI_ZCHAxqbIsaWnuA81hRbI3Tp2Zf3iyEQlORLTU/edit

Help me please... i cannot overclocking

Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect
to unable to init server: Could not connect: Connection refused

ERROR: The control display is undefined; please run 'ncidia-setting --help'

https://i.imgur.com/BHhBnCL.jpg

Same problem, been having this problem for like a week, ever since the update to under volt amd cards.
I'll check tomorrow if the recent update '1128' fixed this.

Still having problems with my Asrock H110 pro BTX+ board, first 2 cards settings for overclock never apply.

And also recently settings for overclock don't apply when I enter settings for multiple cards
ex; 950,950,100,950

[mezerwi]

It loads DAG file and then hangs. I have removed overlooking. Now let's see.
Also can anyone suggest me a better overclocking setting for p106? I used

Core clock 80
Memory clock 1600
Watt 80

Cards were not stable

This was rather better setting but the rig seem to restart after few hours

Core clock 80
Memory clock 1400
Watt 100

HI, i am using 13 p106-100 msi card in 1 rig.  Since last 2 days I am getting error "binary file (standard input) matches simple mining" very often and rig freezes. It doesn't restart itself. Kindly help !!

You need to  provide more information, this has no value, does the OS load? Does the miner start then fail?
Tough to help with out information.
If you have ANY overclocks, take them all out then reboot.

Jadah tinggi sgt,

anyway, my setting:

P106 Eth

PL 75W
Core: -200
Mem: 1200-1400 (depend on card, some of them can take 1400)

[ensoru]

Update v1128
- changed start delay from 6seconds to 12seconds in nvidia rigs (temporay fix for slow usb and too slow initialisation). This shoudl fix some OC problems in some cases on Nvidia rigs
- changed verbose logging in xmr-stak-amd miner from 3 to 4 (more speed stats)

nothing changed
the overclocking parameters did not apply

[itongy]

Update v1128
- changed start delay from 6seconds to 12seconds in nvidia rigs (temporay fix for slow usb and too slow initialisation). This shoudl fix some OC problems in some cases on Nvidia rigs
- changed verbose logging in xmr-stak-amd miner from 3 to 4 (more speed stats)

nothing changed
the overclocking parameters did not apply

After the upgrade also received the same error and cannot overclock.

- I changed a new thumb drive and re-install image.

- I was update the lastest bios.

Before can use and overclock normally, until yesterday.

Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect
to unable to init server: Could not connect: Connection refused

ERROR: The control display is undefined; please run 'ncidia-setting --help'

https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FBHhBnCL.jpg&t=581&c=5715h3g3eV3UZQ

for all my cards 8 gpu

[Warlockmng]

Hello guys,

I have uptated to the DAG fix version via webpanel but miner is not starting, can someone help me please?

Error:

============ Starting Miner ===============
dirname: missing operand
Try 'dirname --help' for more information.
/root/xminer.sh: line 49: [: !=: unary operator expected
GO TO GLOBAL OPTIONS or RELOAD RIG if you already configured options and this ris is new added !!!!!
============ Starting Miner ===============

* Already tried reloading rig and changing the miner software.


Thanks in advance

[onemadfish]

Need a miner for BTX please Timetravel10 algo. unless I missed something.

also looking for the timetravel10 algo for btx!

[Wolverine_Na]

Hello guys,

Does anybody prepare for mining Bitcoin Gold, BTG?
It is coming on 25 October 2017.

Is it possible for mining BTG in SMOS?

[davemanet]

Hello guys,

I have uptated to the DAG fix version via webpanel but miner is not starting, can someone help me please?

Error:

============ Starting Miner ===============
dirname: missing operand
Try 'dirname --help' for more information.
/root/xminer.sh: line 49: [: !=: unary operator expected
GO TO GLOBAL OPTIONS or RELOAD RIG if you already configured options and this ris is new added !!!!!
============ Starting Miner ===============

* Already tried reloading rig and changing the miner software.


Thanks in advance

have you tried installing the image on a fresh usb (download the dag image straight from SMOS website)

[tytanick]

11:18 - Little maintenence
11:23 - Maintenence Done