opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
May 24, 2014, 05:52:34 AM |
|
Dead die? This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months.
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
May 24, 2014, 07:47:50 AM |
|
I also hope they don't switch Plan B off for a week after they ship your Neppy, as it takes about a week to receive a unit what with shipping time plus customs delays.
I don't mean to rain on anyone's parade but I thought Sam said it's either or, Plan B or wait, did he change it? Found what I had read: http://www.coindesk.com/kncminer-offers-plan-b-case-neptune-miner-delivery-delay/“Plan B is simple,” Sam Cole, one of KnCMiner’s co-founders, told CoinDesk: “If we face a delay or any type, we will give each person a choice.”
This is a plan that the company is putting in place for paying customers of its latest model, the 3TH/s Neptune miner.
The options are as follows:
1. Continue to wait.
2. Take a USD refund.
3. Convert to 3TH of hosting performance for a period (still to be worked out, but is likely to be around 6 months).
This is where it said a choice... That's just journalistic interpretation. Or rather crap journalism.
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
May 24, 2014, 07:48:42 AM |
|
Dead die? This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months. Try turning the overclocking off?
|
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
May 24, 2014, 08:08:14 AM |
|
Dead die? This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months. My past charm on that: Block the heatsink fan on that pcb with a piece of cardboard until your temp reads 80C, and if that doesn't kick it on, keep the temp @ 80 while lowering the voltage. once it kicks on, keep the temp adjusted to between 70 and 80
|
|
|
|
Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
|
May 24, 2014, 12:24:17 PM |
|
Dead die?
I had this on an October Jupiter, for me it was the plug of a power cable which fried in the PSU and didn't deliver full power. This happened to other cables I replaced (modular rail) as well over time, until I switched to a stronger PSU.
|
|
|
|
yelloyello
|
|
May 24, 2014, 02:18:53 PM |
|
Difficulty has risen again. Super Jupiter does now 0.15238969 BTC per day. (3.17 TH/s)
In July +/- 0.065 BTC per day.
In August +/- 0.04366 per day.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
|
May 24, 2014, 03:22:27 PM |
|
Difficulty has risen again. Super Jupiter does now 0.15238969 BTC per day. (3.17 TH/s)
In July +/- 0.065 BTC per day.
In August +/- 0.04366 per day.
sigh i wanted zerocoin (they had a good 'hook' as an anon coin) to come out as sha-256 so we could all drag out our old sha-256 equipment start with no pre-mine at 0 difficulty would have been a hoot....everyone and his brother dragging out old cpu/gpu/usb/asic machines..would have taken off like a rocket imho alas....no sha-256 coin with decent 'hook' imho so Jupiter will wind down by probably July (Oct version) my Jupiter is doing (was doing) .0066 per block as of old difficulty so that would be at 18% more or less .005412 per block on slush it seems....I'm at 561.5 gh ver 1.01 stock need to ramp it up with the pandelo(sp?) 1.01.1 version ...but it just started acting flaky here yesterday had to reboot..i may have already run the wheels off anyway for anyone interested ..more or less the above Searing
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
faetos
|
|
May 24, 2014, 03:23:11 PM |
|
Difficulty has risen again. Super Jupiter does now 0.15238969 BTC per day. (3.17 TH/s)
In July +/- 0.065 BTC per day.
In August +/- 0.04366 per day.
I believe the only people making ROI on the equipment KfC sells is KfC.
|
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
May 24, 2014, 07:36:00 PM |
|
Difficulty has risen again. Super Jupiter does now 0.15238969 BTC per day. (3.17 TH/s)
In July +/- 0.065 BTC per day.
In August +/- 0.04366 per day.
I believe the only people making ROI on the equipment KfC sells is KfC. While probably true for Franken & Neptune... If you didn't ROI on their first 28nm batch... You probably didn't buy one.
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
May 24, 2014, 08:25:36 PM |
|
Dead die? This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months. Try turning the overclocking off? How do you turn overclocking off? Give the module no air and suffocate it?
|
|
|
|
ImI
Legendary
Offline
Activity: 1946
Merit: 1019
|
|
May 25, 2014, 12:10:56 AM |
|
Difficulty has risen again. Super Jupiter does now 0.15238969 BTC per day. (3.17 TH/s)
In July +/- 0.065 BTC per day.
In August +/- 0.04366 per day.
I believe the only people making ROI on the equipment KfC sells is KfC. While probably true for Franken & Neptune... If you didn't ROI on their first 28nm batch... You probably didn't buy one. november batch was insanely profitable. overclocked those jups made btc x3.
|
|
|
|
DPoS
|
|
May 25, 2014, 12:16:52 AM |
|
Dead die?
This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months.
it's dead and bloody fucked RMA it and they'll send it back with 3 dead dies.. same board!!
|
|
|
|
kendog77
|
|
May 25, 2014, 01:08:38 AM |
|
Dead die?
This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months.
it's dead and bloody fucked RMA it and they'll send it back with 3 dead dies.. same board!! Super, so you're telling me I just wasted $50 to ship (RMA) a dead November module back to Knc? Hopefully they ship one back that works.
|
|
|
|
SgtMoth
|
|
May 25, 2014, 01:08:43 AM |
|
24 boards--22 running boards, missing 2 cables= 3.6t 4 more boards of replacements to go and my oct jupiter to get going again, ran out of parts, no more cables, heatsinks and beaglebones. I need 4 boards repaired too.
|
|
|
|
5craziest
Member
Offline
Activity: 92
Merit: 10
|
|
May 25, 2014, 01:54:44 AM |
|
I like that it's on an air hockey table
|
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
May 25, 2014, 04:15:05 AM |
|
I like that it's on an air hockey table Genius
|
|
|
|
xstr8guy
|
|
May 25, 2014, 05:38:04 AM Last edit: May 25, 2014, 08:14:12 AM by xstr8guy |
|
Dead die?
This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months.
it's dead and bloody fucked RMA it and they'll send it back with 3 dead dies.. same board!! Super, so you're telling me I just wasted $50 to ship (RMA) a dead November module back to Knc? Hopefully they ship one back that works. The difference between then and now is that they have a gajillion used boards sitting around. So maybe you'll get a different board that actually works. Before they were stockpiling and hashing with all of the available boards so the RMA process was a complete joke. Now it's just a joke because they are sending half-baked, well-worn boards from the datacenter they are clearing out for the next gen.
|
|
|
|
tzortz
|
|
May 25, 2014, 07:39:38 AM |
|
Dead die? This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months. Try turning the overclocking off? How do you turn overclocking off? Give the module no air and suffocate it? It is not the die, it is your VRM not starting up. Try to reboot a few million times and if still does not start up, you will need to change the VRM module. There is some way also to wake it up soldering bypass resistors, but then will be no controllable from your GUI anymore.
|
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
xstr8guy
|
|
May 25, 2014, 08:18:04 AM |
|
Dead die? This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months. Try turning the overclocking off? How do you turn overclocking off? Give the module no air and suffocate it? It is not the die, it is your VRM not starting up. Try to reboot a few million times and if still does not start up, you will need to change the VRM module. There is some way also to wake it up soldering bypass resistors, but then will be no controllable from your GUI anymore. Oh hey, that sounds like fun! Everyone should break out the soldering gun rather than RMA. Or rather, they should just live with the defect because trying to fix it isn't cost effective... at all. Wake up people! Anything that doesn't gain you at least 1 THs these days isn't worth you worrying about. Things have changed drastically over the past few months. Worrying about 160GHs is a waste of your time and effort.
|
|
|
|
poodle63
|
|
May 25, 2014, 08:28:01 AM Last edit: May 25, 2014, 10:14:31 AM by poodle63 |
|
Then break your warranty out, eventhrough few weeks remain, you still could choose RMA, because we do not have KNC released document to proof soldering and wiring work do it ourself, rather wait few days for replacement parts.
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
|