vs.crypt
Newbie
Offline
Activity: 13
Merit: 0
|
|
January 11, 2017, 04:27:46 PM |
|
EWBF_
After restarting the Rig, 40 minutes of mining, all normal again. 300 accepted / 1 rejected share. I'll keep tracing.
Thanks!
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 11, 2017, 04:35:18 PM |
|
sometimes you can overclock to a level with a certain miner, then it gets optimized further and the same level of overclocking isn't stable any longer.
Couldn't have said it better, kudos
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
January 11, 2017, 05:22:10 PM |
|
sometimes you can overclock to a level with a certain miner, then it gets optimized further and the same level of overclocking isn't stable any longer.
Yup.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
Grim
|
|
January 11, 2017, 05:32:48 PM |
|
@ EWBF I get instability if I assign only 1 cpu core to the miner. Assigning 2 cores stability went up a lot. (Haswell Celeron) Maybe you can investigate cpu usage. Anyway, great miner, thank you for your work.
|
|
|
|
thevictimofuktyranny
Legendary
Offline
Activity: 1092
Merit: 1004
|
|
January 11, 2017, 05:38:23 PM |
|
@ EWBF I get instability if I assign only 1 cpu core to the miner. Assigning 2 cores stability went up a lot. (Haswell Celeron) Maybe you can investigate cpu usage. Anyway, great miner, thank you for your work. How to assign more cores, what command would you be using?
|
|
|
|
disman
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 11, 2017, 05:39:17 PM |
|
EWBF_
When the miner crashes, the process continues to hang.
Is it possible to make a miner (program) will be closed in this case?
|
|
|
|
kumax
Full Member
Offline
Activity: 182
Merit: 100
🚀 🌏
|
|
January 11, 2017, 06:40:22 PM |
|
@ EWBF I get instability if I assign only 1 cpu core to the miner. Assigning 2 cores stability went up a lot. (Haswell Celeron) Maybe you can investigate cpu usage. Anyway, great miner, thank you for your work. How to assign more cores, what command would you be using? I'm also curious.. Sorry for a noob question, but I thought that CPU cannot be assigned to this miner. Can you share your .bat settings, please? I would be very grateful.
|
|
|
|
lyolyalya
|
|
January 11, 2017, 07:36:16 PM |
|
ok.i'm back again=)in 84 minutes i get 322 shares for me and 73! shares for dev.it's 22% now!again different pool diffilulty?tell me where he mining.i want there=)
|
|
|
|
EWBF_ (OP)
|
|
January 11, 2017, 07:40:38 PM |
|
ok.i'm back again=)in 84 minutes i get 322 shares for me and 73! shares for dev.it's 22% now!again different pool diffilulty?tell me where he mining.i want there=)
flypool
|
|
|
|
lyolyalya
|
|
January 11, 2017, 07:44:27 PM |
|
ok.i'm back again=)in 84 minutes i get 322 shares for me and 73! shares for dev.it's 22% now!again different pool diffilulty?tell me where he mining.i want there=)
flypool come to miningpoolhub=)don't let me nervous=)
|
|
|
|
pintycar
Newbie
Offline
Activity: 59
Merit: 0
|
|
January 11, 2017, 08:19:47 PM |
|
@ EWBF I get instability if I assign only 1 cpu core to the miner. Assigning 2 cores stability went up a lot. (Haswell Celeron) Maybe you can investigate cpu usage. Anyway, great miner, thank you for your work. How to assign more cores, what command would you be using? I'm also curious.. Sorry for a noob question, but I thought that CPU cannot be assigned to this miner. Can you share your .bat settings, please? I would be very grateful. I'm pretty sure he's referring to the process affinity (in the task manager). So it's not about using the CPU to mine, but to process the supporting operations that allow the GPUs to mine.
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 11, 2017, 08:37:47 PM |
|
@ EWBF I get instability if I assign only 1 cpu core to the miner. Assigning 2 cores stability went up a lot. (Haswell Celeron) Maybe you can investigate cpu usage. Anyway, great miner, thank you for your work. How to assign more cores, what command would you be using? I'm also curious.. Sorry for a noob question, but I thought that CPU cannot be assigned to this miner. Can you share your .bat settings, please? I would be very grateful. I'm pretty sure he's referring to the process affinity (in the task manager). So it's not about using the CPU to mine, but to process the supporting operations that allow the GPUs to mine. I don't see why he need to touch the process affinity, why not let it by default having affinity with all available cpu cores
|
|
|
|
un4given
|
|
January 11, 2017, 08:42:35 PM |
|
so got my Palit Jetstream 1070 today and started testing. Using MSI Afterburner to set clocks. Stuck in a little problem though. Eventhough i set +150 core and +600 memory and 80% power my GPU clock gets stuck at base and isnt boosting. memory gets overclocked in the same time. Any1 an idea? or maybe i should switch the bios switch to position 2 on the card itself? mining at 355 - 375 sol and it is jumping around. GPU clock ist stuck at 1506 mhz. maybe use another tool? thx in advance
|
|
|
|
xPwnK
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 11, 2017, 08:44:24 PM |
|
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 11, 2017, 08:49:23 PM |
|
so got my Palit Jetstream 1070 today and started testing. Using MSI Afterburner to set clocks. Stuck in a little problem though. Eventhough i set +150 core and +600 memory and 80% power my GPU clock gets stuck at base and isnt boosting. memory gets overclocked in the same time. Any1 an idea? or maybe i should switch the bios switch to position 2 on the card itself? mining at 355 - 375 sol and it is jumping around. GPU clock ist stuck at 1506 mhz. maybe use another tool? thx in advance
Have you checked if the card was running latest bios ? Screenshot of the afterburner setting ?
|
|
|
|
un4given
|
|
January 11, 2017, 08:58:53 PM |
|
so got my Palit Jetstream 1070 today and started testing. Using MSI Afterburner to set clocks. Stuck in a little problem though. Eventhough i set +150 core and +600 memory and 80% power my GPU clock gets stuck at base and isnt boosting. memory gets overclocked in the same time. Any1 an idea? or maybe i should switch the bios switch to position 2 on the card itself? mining at 355 - 375 sol and it is jumping around. GPU clock ist stuck at 1506 mhz. maybe use another tool? thx in advance
Have you checked if the card was running latest bios ? Screenshot of the afterburner setting ? BIOS Checked, is the latest one available from Palit GPU core just stucks at 1506 and only sometimes goes up
|
|
|
|
ioglnx
Sr. Member
Offline
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
|
|
January 11, 2017, 09:33:31 PM |
|
The integration is not done yet. I'm not able to compile the source due to incomplete template def. and solver integration.
|
GTX 1080Ti rocks da house... seriously... this card is a beast³ Owning by now 18x GTX1080Ti :-D @serious love of efficiency
|
|
|
laik2
|
|
January 11, 2017, 10:03:25 PM |
|
The integration is not done yet. I'm not able to compile the source due to incomplete template def. and solver integration. Use CMakeList.txt from cuda_tromp just replace cuda_tromp with cuda_djezo It still has some windows code dependencies that needs to be polished but hopefully in a few hours some smarter cpp coder will make it compatible for linux.
|
|
|
|
bughatti
|
|
January 11, 2017, 10:06:07 PM |
|
Hello all, I just got into mining about a week ago, spent alot of nights up late reading and trying to understand. I decided on my first rig and after trying lots of different coins, algos and software i wanted to give an update on what I have.
Win 10 pro x64 Let nvidia experiance update drivers MSI z97 gaming 5 board Intel Celeron 2 x ASUS gtx 1060 3gb 1 x PNY gtx 1060 3gb CORSAIR 750 mod PSU
Using EWBFs miner seems to give me the best performance, I have tried nicehash and a few others
For the ASUS cards I am seeing a constant 260 SOL/s for the PNY I am seeing about 220 SOL/s
Just ordered another ASUS and will eventually fill this board with them.
So far I have noticed upwards of 900+ SOL/s with short bursts up to 1100 with just 3 cards, so hopefully with 7 or 8 with a pci splitter I can pull 2500, would be nice.
|
|
|
|
th00ber
|
|
January 11, 2017, 10:48:42 PM |
|
_EWBF, will the next version have a logfile integrated ? Thanks
|
|
|
|
|