twib2
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 280
Merit: 250
Helperizer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 01:35:20 PM |
|
Now New problem I purchased 2 coolmax PSU and they are rated for 750w @57a and for some reason they are not powering up when connected to the power distribution board. Does both PSU have to match for it to work? are the 2 6 pins are inter changeable? Not sure what's going wrong but it does not power up. I can do the paperclip trick and it runs but it will not power the blade. I'm halfway there just need to get power to the other blade. Anyone know this answer?
If you have any of the PCIe/CPU plugs swapped, then your unit will not start. Luckily, that particular problem is well-protected, and there is no damage. So, check that you have the right plugs in the right places. At first, I did that twice while swapping power supplies, but now it's 2nd nature. See my earlier post with pics of what should go where at: https://bitcointalk.org/index.php?topic=379819.msg4557614#msg4557614
|
|
|
|
M3kk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 01:40:10 PM |
|
Got today my tracking.. 10th payment via BTC.. "Shipment information received" so bad..
|
|
|
|
pmq
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 01:42:05 PM |
|
I could tip .1btc if someone would like to fix that through teamviewer. I would give more but I spent all my btc's in that rig ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) I also had trouble with the wifi, pools were switching to failover, connection lost at random moments etc. Suppose you can't use it without wifi? It should work fine then. I actually bought an extra LAN switch for the miners, before I received them. Read from this thread, that the onboard wifi wouldn't work correctly, but tried it anyway ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The problem was with the power consumption I think, ethernet card and wifi together would draw more power, than the control board is able to supply.
|
|
|
|
hephaist0s
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 01:57:51 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FOd8AWyOl.jpg&t=665&c=6SfbAy61Ga1NAA) Ordered 1/7, received unit Monday 1/20. Blades were coming loose but once everything was tightened down, it started right up and has been running great. More pics here: http://object2212.com/?p=24
|
Tips graciously accepted on my behalf by Mr. Pig. | object2212.com | BTC:1H78y8FVeQrWY6KnxA6WLFQGUoajCuiMAu | ETH:0x3c1bC39EC7F3f6b26ACb6eeeEFe7dE2f486a72E9
|
|
|
Slander
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 01:59:49 PM |
|
Soooo I went to fry's got a single rail 750w 56v and it spins the fan then quits on me. Does this mean that the 56 is not strong enough to power one blade and that super jet fan that comes with the miner? Does anyone know what I can get from frys that will get this thing to run.
2. I tried to connect it to my raspberry Pi and the Pi is giving me 100% error. Does anyone know the command for the Pi to see the CGminer running. I know that I can add it via that page but have no clue how to get there.
So far this machine has been a headache. I wish they would have tested it.
On top of that I can't connect to the TP Link card. I have no clue what's going on and I'm real close to getting real mad at the people that made this. I had good words for them but I'm really loosing faith. The only thing i can depend on is that the people in this forum has been great. Thanks for the helpful tips. I'm just getting close to the end of my rope.
I found this video very helpful, its the same interface http://www.youtube.com/watch?v=If-padHumv4
|
|
|
|
Pistachio
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 02:05:37 PM |
|
10-12 days seems about on par with what's been happening lately.
Can anyone confirm or deny if I should just trash the included PSU's in the US?
They are 170-230Vac you need 220v connection for them. See pictures few pages back. They will work fine as long as they don't blow up. Now New problem I purchased 2 coolmax PSU and they are rated for 750w @57a and for some reason they are not powering up when connected to the power distribution board. Does both PSU have to match for it to work? are the 2 6 pins are inter changeable? Not sure what's going wrong but it does not power up. I can do the paperclip trick and it runs but it will not power the blade. I'm halfway there just need to get power to the other blade. Anyone know this answer? Seriously, 60a on a single rail is needed for reliable power for each blade. EDIT: This is the cheapest PSU I have found that works (currently hashing away) http://www.newegg.com/Product/Product.aspx?Item=N82E16817153174.
|
|
|
|
sikke
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 02:09:19 PM |
|
I could tip .1btc if someone would like to fix that through teamviewer. I would give more but I spent all my btc's in that rig ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) I also had trouble with the wifi, pools were switching to failover, connection lost at random moments etc. Suppose you can't use it without wifi? It should work fine then. I actually bought an extra LAN switch for the miners, before I received them. Read from this thread, that the onboard wifi wouldn't work correctly, but tried it anyway ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The problem was with the power consumption I think, ethernet card and wifi together would draw more power, than the control board is able to supply. If you setup wifi it will only work after you unplug the ethernet cable --> TPlink will route to the wifi and connect pools OK You cannot access the WebUI configuration page over wifi or it wont answer to ping. Doesnt matter if you setup wifi in LAN firewall or WAN side of firewall. WebUI is protected from wifi side in firewall settings of TPlink. IF you dont know this much i suggest DO NOT GO MESS WITH THEM. Do not enable disable things you dont know. You will lose access to your unit like some ppl in here did. Here are setup pictures. My units are in private network so IP range is 10.x.x.x firewalled ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) My LAN is setup with static IP 10.250.1.202 which i can use and config the Unit. gateway 10.250.1.1 private DNS server 10.250.1.1 you should use 8.8.8.8 it's googles DNS will always work if gateway is correct. My wifi is connected to private wifi (about 1500$ Cisco industrial lap station) wifi is setup with DHCP so the IP comes from there. Once i pull off the ethernet cable the TPlink will automatically switch to wifi and the unit will keep hashing over wifi. But like told in this thread before TPlink wifi is highly unstable and will failover alot, you will lose hashing power. I do not know if units some are diffrent, but i dont trust the wifi. I did testing for 8 hours and i constantly kept hearing from fans how the unit did lose connection to the pool also this was seen from hashing power in the pool. Like previously suggested in this thread if you must use wifi you should get wifi-gaming adapter and connect the wifi trough ethernet port. This wifi is not stable. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails109.imagebam.com%2F30322%2F30d9ce303215270.jpg&t=665&c=-5JY-ADL95EC2g) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails110.imagebam.com%2F30322%2F798ece303215271.jpg&t=665&c=enxDvkm9woOTNg) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails109.imagebam.com%2F30322%2Ff197c4303215274.jpg&t=665&c=UjuCKcrA_N-sSA) Today i did some PSU upgrading with 1200w FSP Aurum single rail psus. Now this unit got 2400w worth 12v total 200A. Time to put in some torture testing. Outside temp is here is -19c today btw ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails112.imagebam.com%2F30322%2F76377e303214831.jpg&t=665&c=X-VcT_kCI5juMA) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails110.imagebam.com%2F30322%2Fdb17f6303214838.jpg&t=665&c=mQLwvSMuLboS8w) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails110.imagebam.com%2F30322%2F557777303214840.jpg&t=665&c=Z80cTkp5kLwV_w) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails110.imagebam.com%2F30322%2Fdc50b2303214847.jpg&t=665&c=FM4LoVCRVQz3XA) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails109.imagebam.com%2F30322%2Fc252cf303214850.jpg&t=665&c=cDDLOBz2H3xXiQ) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fthumbnails111.imagebam.com%2F30322%2Fdd8102303214856.jpg&t=665&c=FMECqCSHJ-JFvw)
|
|
|
|
|
r1senfa17h
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 02:44:38 PM |
|
Ordered 14 units on 1/9, received 7 yesterday and expect 7 more today. I highly recommend taking these apart and checking for loose wires and screws. I'm pretty sure they dropped these into their boxes from 6 feet up and then threw a handful of screws in afterwards. All 7 units came online and 6 of them hash above 200GH/s with one hashing at ~180GH/s. One of them seems to have trouble keeping the fans going and it keeps overheating - which is frustrating. I've tried using the --avalon-fan 20-80 setting without success. The fans seem to just stop until the unit gets super hot and then come online for a minute or two and then stop again. Here's a pic. Click it to hear the noise on youtube. They're all using the stock PSUs on my 240v 30a circuits. They draw exactly 1000w each. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi40.tinypic.com%2F6iw7s8.jpg&t=665&c=sV6FiX5rl4qXkw)
|
1N3o5Kyvb4iECiJ3WKScKY8xTVXxf1hMvA
|
|
|
sikke
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 03:01:44 PM |
|
Ordered 14 units on 1/9, received 7 yesterday and expect 7 more today. I highly recommend taking these apart and checking for loose wires and screws. I'm pretty sure they dropped these into their boxes from 6 feet up and then threw a handful of screws in afterwards.
All 7 units came online and 6 of them hash above 200GH/s with one hashing at ~180GH/s. One of them seems to have trouble keeping the fans going and it keeps overheating - which is frustrating. I've tried using the --avalon-fan 20-80 setting without success. The fans seem to just stop until the unit gets super hot and then come online for a minute or two and then stop again. Here's a pic. Click it to hear the noise on youtube.
Very cool setup there. I'm with you on the packing and screws. All my units have had loose screws in parcel. Check your cgminer api log from there you can see if all chips are hashing. Half the speed means 5 chips are cold. 5 Cold chips in blade unit. I will try to bypass fuses maybe tomorrow. This is old picture i didnt take the unit apart today.
|
|
|
|
cannachris
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 03:07:30 PM |
|
just got my miner today i ordered on the 8th working very well ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) , but loud... do the temperature control parameters override the fan settings? can i kill my miner by turning the fans to a too low speed? is it possible to run the chips safely at 1425 or 1450 with the stock psu's? you using the included psu? are you in the US? I'm using the included psu's and I'm mainland EU. I also have another issue: the room I would like to put them in has ungrounded wall sockets, and the first time i plugged it in there i got a small static shock from the miner so i quickly put it into my grounded plugs in the kitchen but the sound of the fans over dinner is unbearable... can i just use the ungrounded sockets?
|
|
|
|
PaintShopPro6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 03:11:15 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FOd8AWyOl.jpg&t=665&c=6SfbAy61Ga1NAA) Ordered 1/7, received unit Monday 1/20. Blades were coming loose but once everything was tightened down, it started right up and has been running great. More pics here: http://object2212.com/?p=24I am glad you got your unit. Unfortunately, the difference between a mining start date of 1/14 and 1/22 is the likely difference between profitability, unless you are able to sell your device at some stage. This is according to http://bitcoinwisdom.com/bitcoin/calculator
|
|
|
|
udt89
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 03:14:45 PM |
|
Finally got tracking number. The 22nd their time. 12 days after order date. 4 days after promised ship date. Only positive is he accepts PayPal.
I'm in the same case... but it was hard to have it, had to fill a dispute in paypal. By the was what is the status in dhl tracking website? Mine is : "shipping info received" I'm afraid that I have to wait some days more for pickup... yea me too. these guys are full of crap i think with their logistic story. its been 22 hours their time that the package tracking info was received. Seems like a long time to not have any movement. i cant wait for this to be over and find a new seller. this has been BRUTAL. does anyone have tracking for their package that they can paste here that includes "shipping info received" so we can see how long it takes to get movement.
|
|
|
|
r1senfa17h
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 03:20:28 PM |
|
Anyone know how to force the fans to run all the time independently of temperature?
|
1N3o5Kyvb4iECiJ3WKScKY8xTVXxf1hMvA
|
|
|
Guava
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 70
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 03:23:06 PM |
|
Anyone know how to force the fans to run all the time independently of temperature?
Try --avalon-fan 100, if it revs down. Try --avalon-fan 0 instead.
|
1J1VmJKZbeEvNCxTtpcouini15RDkMchRP
|
|
|
slavo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 03:55:56 PM |
|
do I have to open some ports on my router ? I'm now connected trhough wifi, and I can "apply change" without the forever wheel ^^ but cgminer status is still [Firmware Version] => 20130821 cgminer-70bc62c luci-d854edc+ cgminer-openwrt-packages-800cc58 Socket connect failed: Connection refused and here is my log Wed Jan 22 15:16:00 2014 auth.info kernel: [ 9.460000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:00 2014 auth.info kernel: [ 9.470000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:00 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/nls_base.ko Wed Jan 22 15:16:00 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/usb-common.ko Wed Jan 22 15:16:00 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/usbcore.ko Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: EEPROM regdomain: 0x0 Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: EEPROM indicates default country code should be used Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: doing EEPROM country->regdmn map search Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: country maps to regdmn code: 0x3a Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: Country alpha2 being used: US Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: Regpair used: 0x3a Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.210000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.220000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/gpio-button-hotplug.ko Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.360000] cfg80211: Calling CRDA for country: US Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.360000] cfg80211: Regulatory domain changed to country: US Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.370000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.380000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.390000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.400000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.400000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.410000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.540000] ip_tables: (C) 2000-2006 Netfilter Core Team Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.590000] xt_time: kernel timezone is -0000 Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/xt_mark.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ehci-hcd.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ehci-platform.ko Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.620000] nf_conntrack version 0.5.0 (962 buckets, 3848 max) Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ledtrig-default-on.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ledtrig-timer.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/leds-gpio.ko Wed Jan 22 15:16:05 2014 daemon.error netifd: Interface 'loopback' is now up Wed Jan 22 15:16:05 2014 daemon.error netifd: ethernet (622): udhcpc (v1.19.4) started Wed Jan 22 15:16:05 2014 daemon.error netifd: ethernet (622): Sending discover... Wed Jan 22 15:16:08 2014 daemon.error netifd: ethernet (622): Sending discover... Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.010000] cfg80211: Calling CRDA for country: FR Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.030000] cfg80211: Regulatory domain changed to country: FR Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.040000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.040000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.050000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.070000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Wed Jan 22 15:16:11 2014 daemon.info sysinit: command failed: Device or resource busy (-16) Wed Jan 22 15:16:11 2014 daemon.error netifd: ethernet (622): Sending discover... Wed Jan 22 15:16:12 2014 news.info crond[803]: crond: crond (busybox 1.19.4) started, log level 5 Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.780000] wlan0: authenticate with 3a:f2:c9:4e:93:30 Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.810000] wlan0: send auth to 3a:f2:c9:4e:93:30 (try 1/3) Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.810000] wlan0: authenticated Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.830000] ath9k ar933x_wmac wlan0: disabling HT/VHT due to WEP/TKIP use Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.850000] wlan0: associate with 3a:f2:c9:4e:93:30 (try 1/3) Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.850000] wlan0: RX AssocResp from 3a:f2:c9:4e:93:30 (capab=0x411 status=0 aid=3) Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.860000] wlan0: associated Wed Jan 22 15:16:12 2014 daemon.error netifd: OWNZOR (815): udhcpc (v1.19.4) started Wed Jan 22 15:16:13 2014 daemon.error netifd: OWNZOR (815): Sending discover... Wed Jan 22 15:16:13 2014 daemon.error netifd: OWNZOR (815): Sending select for 192.168.0.21... Wed Jan 22 15:16:13 2014 daemon.error netifd: OWNZOR (815): Lease of 192.168.0.21 obtained, lease time 864000 Wed Jan 22 15:16:13 2014 security.info dropbear[841]: Not backgrounding Wed Jan 22 15:16:13 2014 daemon.error netifd: Interface 'OWNZOR' is now up Wed Jan 22 15:16:13 2014 authpriv.error firewall: Reloading firewall due to ifup of OWNZOR (wlan0) Wed Jan 22 15:16:17 2014 authpriv.error dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Wed Jan 22 15:16:17 2014 authpriv.error dnsmasq: Allowing 127.0.0.0/8 responses Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: started, version 2.66 cachesize 150 Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using local addresses only for domain lan Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: reading /tmp/resolv.conf.auto Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using nameserver 212.27.40.241#53 Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using nameserver 212.27.40.240#53 Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using local addresses only for domain lan Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: read /etc/hosts - 1 addresses Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 88.191.228.173 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 2.openwrt.pool.ntp.org to 91.121.52.147 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 91.121.60.158 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 212.85.158.10 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x01 offset 2047.933923 delay 0.038463 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x01 offset 2047.931829 delay 0.039390 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x01 offset 2047.933888 delay 0.042591 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x01 offset 2047.933677 delay 0.048538 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x03 offset 2047.932067 delay 0.035738 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x03 offset 2047.933092 delay 0.047349 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x07 offset 2047.935800 delay 0.043184 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x03 offset 2047.935857 delay 0.046692 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x03 offset 2047.936107 delay 0.047478 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x0f offset 2047.935953 delay 0.043211 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x07 offset 2047.936352 delay 0.047461 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x07 offset 2047.936767 delay 0.054799 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x1f offset 0.012460 delay 0.046569 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x0f offset 0.012271 delay 0.050132 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x07 offset 0.013024 delay 0.051006 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x0f offset 0.013814 delay 0.059745 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:35 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:35 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x1f offset 0.012259 delay 0.056719 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x3f offset 0.008033 delay 0.038287 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x1f offset 0.007804 delay 0.041929 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x0f offset 0.007571 delay 0.041996 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:37 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:37 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x3f offset 0.009837 delay 0.052119 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x7f offset 0.008040 delay 0.037707 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x3f offset 0.006235 delay 0.046742 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x1f offset 0.006082 delay 0.046808 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:39 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:39 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:39 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.007012 delay 0.036077 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:40 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x7f offset 0.007314 delay 0.047273 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x7f offset 0.005291 delay 0.036042 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x3f offset 0.005292 delay 0.037755 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0xff offset 0.006384 delay 0.044974 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.010983 delay 0.044154 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0xff offset 0.010788 delay 0.047923 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x7f offset 0.011437 delay 0.048229 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:43 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:43 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:43 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0xff offset 0.004357 delay 0.047201 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.010820 delay 0.043475 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0xff offset 0.010518 delay 0.047782 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.006298 delay 0.034712 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0xff offset 0.006722 delay 0.038562 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0xff offset 0.006819 delay 0.040214 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0xff offset 0.006385 delay 0.040193 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:46 2014 daemon.info sysinit: - init complete - Wed Jan 22 15:51:09 2014 news.info crond[803]: crond: USER root pid 1025 cmd /usr/bin/cgminer-monitor Wed Jan 22 15:52:01 2014 news.info crond[803]: crond: USER root pid 1265 cmd /usr/bin/cgminer-monitor Wed Jan 22 15:54:01 2014 news.info crond[803]: crond: USER root pid 1650 cmd /usr/bin/cgminer-monitor need help ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
dozerz
Legendary
Offline
Activity: 2231
Merit: 1057
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 04:02:45 PM |
|
do I have to open some ports on my router ? I'm now connected trhough wifi, and I can "apply change" without the forever wheel ^^ but cgminer status is still [Firmware Version] => 20130821 cgminer-70bc62c luci-d854edc+ cgminer-openwrt-packages-800cc58 Socket connect failed: Connection refused and here is my log Wed Jan 22 15:16:00 2014 auth.info kernel: [ 9.460000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:00 2014 auth.info kernel: [ 9.470000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:00 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/nls_base.ko Wed Jan 22 15:16:00 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/usb-common.ko Wed Jan 22 15:16:00 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/usbcore.ko Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: EEPROM regdomain: 0x0 Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: EEPROM indicates default country code should be used Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: doing EEPROM country->regdmn map search Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: country maps to regdmn code: 0x3a Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: Country alpha2 being used: US Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.200000] ath: Regpair used: 0x3a Wed Jan 22 15:16:01 2014 auth.none kernel: [ 10.210000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.220000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/gpio-button-hotplug.ko Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.360000] cfg80211: Calling CRDA for country: US Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.360000] cfg80211: Regulatory domain changed to country: US Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.370000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.380000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.390000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.400000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.400000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.410000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.540000] ip_tables: (C) 2000-2006 Netfilter Core Team Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.590000] xt_time: kernel timezone is -0000 Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/xt_mark.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ehci-hcd.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ehci-platform.ko Wed Jan 22 15:16:01 2014 auth.info kernel: [ 10.620000] nf_conntrack version 0.5.0 (962 buckets, 3848 max) Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ledtrig-default-on.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/ledtrig-timer.ko Wed Jan 22 15:16:01 2014 daemon.info sysinit: failed to insert /lib/modules/3.8.13/leds-gpio.ko Wed Jan 22 15:16:05 2014 daemon.error netifd: Interface 'loopback' is now up Wed Jan 22 15:16:05 2014 daemon.error netifd: ethernet (622): udhcpc (v1.19.4) started Wed Jan 22 15:16:05 2014 daemon.error netifd: ethernet (622): Sending discover... Wed Jan 22 15:16:08 2014 daemon.error netifd: ethernet (622): Sending discover... Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.010000] cfg80211: Calling CRDA for country: FR Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.030000] cfg80211: Regulatory domain changed to country: FR Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.040000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.040000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.050000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Wed Jan 22 15:16:10 2014 auth.info kernel: [ 19.070000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Wed Jan 22 15:16:11 2014 daemon.info sysinit: command failed: Device or resource busy (-16) Wed Jan 22 15:16:11 2014 daemon.error netifd: ethernet (622): Sending discover... Wed Jan 22 15:16:12 2014 news.info crond[803]: crond: crond (busybox 1.19.4) started, log level 5 Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.780000] wlan0: authenticate with 3a:f2:c9:4e:93:30 Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.810000] wlan0: send auth to 3a:f2:c9:4e:93:30 (try 1/3) Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.810000] wlan0: authenticated Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.830000] ath9k ar933x_wmac wlan0: disabling HT/VHT due to WEP/TKIP use Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.850000] wlan0: associate with 3a:f2:c9:4e:93:30 (try 1/3) Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.850000] wlan0: RX AssocResp from 3a:f2:c9:4e:93:30 (capab=0x411 status=0 aid=3) Wed Jan 22 15:16:12 2014 auth.info kernel: [ 21.860000] wlan0: associated Wed Jan 22 15:16:12 2014 daemon.error netifd: OWNZOR (815): udhcpc (v1.19.4) started Wed Jan 22 15:16:13 2014 daemon.error netifd: OWNZOR (815): Sending discover... Wed Jan 22 15:16:13 2014 daemon.error netifd: OWNZOR (815): Sending select for 192.168.0.21... Wed Jan 22 15:16:13 2014 daemon.error netifd: OWNZOR (815): Lease of 192.168.0.21 obtained, lease time 864000 Wed Jan 22 15:16:13 2014 security.info dropbear[841]: Not backgrounding Wed Jan 22 15:16:13 2014 daemon.error netifd: Interface 'OWNZOR' is now up Wed Jan 22 15:16:13 2014 authpriv.error firewall: Reloading firewall due to ifup of OWNZOR (wlan0) Wed Jan 22 15:16:17 2014 authpriv.error dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Wed Jan 22 15:16:17 2014 authpriv.error dnsmasq: Allowing 127.0.0.0/8 responses Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: started, version 2.66 cachesize 150 Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using local addresses only for domain lan Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: reading /tmp/resolv.conf.auto Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using nameserver 212.27.40.241#53 Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using nameserver 212.27.40.240#53 Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: using local addresses only for domain lan Wed Jan 22 15:16:17 2014 daemon.info dnsmasq[913]: read /etc/hosts - 1 addresses Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 88.191.228.173 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 2.openwrt.pool.ntp.org to 91.121.52.147 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 91.121.60.158 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 212.85.158.10 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x01 offset 2047.933923 delay 0.038463 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x01 offset 2047.931829 delay 0.039390 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x01 offset 2047.933888 delay 0.042591 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:16:22 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x01 offset 2047.933677 delay 0.048538 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x03 offset 2047.932067 delay 0.035738 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:23 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x03 offset 2047.933092 delay 0.047349 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x07 offset 2047.935800 delay 0.043184 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x03 offset 2047.935857 delay 0.046692 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:16:24 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x03 offset 2047.936107 delay 0.047478 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x0f offset 2047.935953 delay 0.043211 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x07 offset 2047.936352 delay 0.047461 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:16:25 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x07 offset 2047.936767 delay 0.054799 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x1f offset 0.012460 delay 0.046569 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x0f offset 0.012271 delay 0.050132 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x07 offset 0.013024 delay 0.051006 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:34 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x0f offset 0.013814 delay 0.059745 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:35 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:35 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x1f offset 0.012259 delay 0.056719 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x3f offset 0.008033 delay 0.038287 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x1f offset 0.007804 delay 0.041929 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:36 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x0f offset 0.007571 delay 0.041996 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:37 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:37 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x3f offset 0.009837 delay 0.052119 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0x7f offset 0.008040 delay 0.037707 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x3f offset 0.006235 delay 0.046742 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:38 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x1f offset 0.006082 delay 0.046808 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:39 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:39 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:39 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.007012 delay 0.036077 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:40 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0x7f offset 0.007314 delay 0.047273 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0x7f offset 0.005291 delay 0.036042 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x3f offset 0.005292 delay 0.037755 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:41 2014 daemon.info sysinit: ntpd: reply from 212.85.158.10: reach 0xff offset 0.006384 delay 0.044974 status 0x24 strat 2 refid 0x91eecb0e rootdelay 0.012100 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.010983 delay 0.044154 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0xff offset 0.010788 delay 0.047923 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:42 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0x7f offset 0.011437 delay 0.048229 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:43 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:43 2014 daemon.info sysinit: ntpd: sent query to 212.85.158.10 Wed Jan 22 15:50:43 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0xff offset 0.004357 delay 0.047201 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.010820 delay 0.043475 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:44 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0xff offset 0.010518 delay 0.047782 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: sent query to 88.191.228.173 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: reply from 88.191.228.173: reach 0xff offset 0.006298 delay 0.034712 status 0x24 strat 3 refid 0x58bff579 rootdelay 0.002548 Wed Jan 22 15:50:45 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0xff offset 0.006722 delay 0.038562 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: sent query to 91.121.52.147 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: sent query to 91.121.60.158 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: reply from 91.121.52.147: reach 0xff offset 0.006819 delay 0.040214 status 0x24 strat 2 refid 0xc61e5c02 rootdelay 0.109102 Wed Jan 22 15:50:46 2014 daemon.info sysinit: ntpd: reply from 91.121.60.158: reach 0xff offset 0.006385 delay 0.040193 status 0x24 strat 3 refid 0xc239a901 rootdelay 0.022751 Wed Jan 22 15:50:46 2014 daemon.info sysinit: - init complete - Wed Jan 22 15:51:09 2014 news.info crond[803]: crond: USER root pid 1025 cmd /usr/bin/cgminer-monitor Wed Jan 22 15:52:01 2014 news.info crond[803]: crond: USER root pid 1265 cmd /usr/bin/cgminer-monitor Wed Jan 22 15:54:01 2014 news.info crond[803]: crond: USER root pid 1650 cmd /usr/bin/cgminer-monitor need help ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) if you wait it should connect providing your pool details are correct, thats how i fixed mine.
|
space for rent, shilling for sats
|
|
|
slavo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 04:10:33 PM |
|
I wait I wait, nothing happens.
Could someone upload a backup of a working machine ?
I think it will solve that sh***...
|
|
|
|
r1senfa17h
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 04:10:41 PM |
|
Anyone know how to force the fans to run all the time independently of temperature?
Try --avalon-fan 100, if it revs down. Try --avalon-fan 0 instead. Thanks, I tried both - 0 seems to spin the Fan2 @ '240' and Fan3 @ '480'. The other miners show '2880' for both fans. Any ideas on how to make these fans go all the time?
|
1N3o5Kyvb4iECiJ3WKScKY8xTVXxf1hMvA
|
|
|
sikke
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2014, 04:17:20 PM |
|
Anyone know how to force the fans to run all the time independently of temperature?
Try --avalon-fan 100, if it revs down. Try --avalon-fan 0 instead. Thanks, I tried both - 0 seems to spin the Fan2 @ '240' and Fan3 @ '480'. The other miners show '2880' for both fans. Any ideas on how to make these fans go all the time? Maybe starts form value 20 not 0 and it could be reverse so 80 is 20% fan speed. After setting value give it minute or 2 to setup. https://en.bitcoin.it/wiki/Avalon--avalon-fan <arg> Set fanspeed percentage for avalon, single value or range (default: 20-100) I have a unit that works reverse: --avalon-fan 80 = 20% fan speed if i put value 20 it's 80% fan speed. other units --avalon-fan 20 = 20% fan speed
|
|
|
|
|