[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s

[Bitkoinzz]

Hi Folks,

Not able to check my email and account till tomorrow morning so if you PM on my CroverNo account I will get it in the morning.

If you have me on Skype or PM thats cool.


As far as Im aware I still have all my coupons left -

So thats:
Current Bitmain Price 0.893

AntMiner S1 Coupon 0.055 BTC - 4   1X S1 with Discount -    0.838
AntMiner S1 Coupon 0.02 BTC    - 3 1X S1 with Discount - 0.873
AntMiner S1 Coupon 0.12 BTC  - 3 1X S1 with Discount - 0.773

Need to be used by the 31st !!

Also as a agent still doing low customs fee - if you want to make direct contact with me about support or issues please raise a case on http://bitcoinhardware.co.vu/bitmain/

As you can see on my website you can raise an issue with Sales and Support Department - This is for making orders via myself for low customs fee also Support of the miner - Cheers

Thank you

TICKET CREATED REGARDING SALES.

[1715104579]

1715104579

[1715104579]

1715104579

[maxwellga]

I'm not sure if this is the correct forum for this question.

I currently have 5 S1's running. I would like to add a second fan to each unit. I bought some 120cm PWM Cooler Master fans.
What is the correct thread for the screws to match the tapped holes on the exhaust end of the S1's?

thanks,

[MoreBloodWine]

Maybe if I use the ticket system BITMAIN will get off ass and actually say somethin... here's hoping it helps. If not, we'll see if he responds after I start posting all over FB and reddit.

[jimrome]

I'm not sure if this is the correct forum for this question.

I currently have 5 S1's running. I would like to add a second fan to each unit. I bought some 120cm PWM Cooler Master fans.
What is the correct thread for the screws to match the tapped holes on the exhaust end of the S1's?

thanks,

#8-32 seems to be stock, but M4-7 will work in a pinch. Keep in mind that you'll need to have a spacer between the fan and chassis in the front or you'll likely run into interference from the chassis screws. Usually I just use 10-32 or 1/4-20 nuts for this purpose, but I'm sure there are other options.

[ZiG]

I'm not sure if this is the correct forum for this question.

I currently have 5 S1's running. I would like to add a second fan to each unit. I bought some 120cm PWM Cooler Master fans.
What is the correct thread for the screws to match the tapped holes on the exhaust end of the S1's?

thanks,

#8-32 seems to be stock, but M4-7 will work in a pinch. Keep in mind that you'll need to have a spacer between the fan and chassis in the front or you'll likely run into interference from the chassis screws. Usually I just use 10-32 or 1/4-20 nuts for this purpose, but I'm sure there are other options.

For sure it is METRIC...not inches...

[jimrome]

#8-32 seems to be stock, but M4-7 will work in a pinch. Keep in mind that you'll need to have a spacer between the fan and chassis in the front or you'll likely run into interference from the chassis screws. Usually I just use 10-32 or 1/4-20 nuts for this purpose, but I'm sure there are other options.

For sure it is METRIC...not inches...

Bitmain ships with SAE #8-32 screws installed, at least in the bunch I have here. I'm not sure why you say "for sure it is METRIC"?

[CroverNo]

All Tickets have been replied too

All Coupons still are available  

http://bitcoinhardware.co.vu/bitmain/

Sales + Technical Support

Low Custom fee option + Discount codes still available

Its been a busy few days for Support & Sales



Cheers

[MoreBloodWine]

All Tickets have been replied too

All Coupons still are available  

http://bitcoinhardware.co.vu/bitmain/

Sales + Technical Support

Low Custom fee option + Discount codes still available

Its been a busy few days for Support & Sales



Cheers

Does that system have anything to actually do with BITMAIN, the non existent person who seemingly helps those he deems worthy enough for a reply ? Just thought I'd ask since on the off chance he does have something to do with that system I have yet to get a reply back meaning no, not all tickets have been answered and one was sent to both support and sales.

Even if he doesn't it was worth a shot, that said, the fact I'm still out 0.988, and have no miner to show for it and the fact they now cost I think 0.893 doesn't sit too well with me nor should it. What's funny is everyone praises bitmain or great customer service and how they respond to tickets and emails in no time yet I still sit here after a week with my thumb up my ass and nothing to show for it.

[CroverNo]

All Tickets have been replied too

All Coupons still are available  

http://bitcoinhardware.co.vu/bitmain/

Sales + Technical Support

Low Custom fee option + Discount codes still available

Its been a busy few days for Support & Sales



Cheers

Does that system have anything to actually do with BITMAIN, the non existent person who seemingly helps those he deems worthy enough for a reply ? Just thought I'd ask since on the off chance he does have something to do with that system I have yet to get a reply back meaning no, not all tickets have been answered and one was sent to both support and sales.

Even if he doesn't it was worth a shot, that said, the fact I'm still out 0.988, and have no miner to show for it and the fact they now cost I think 0.893 doesn't sit too well with me nor should it. What's funny is everyone praises bitmain or great customer service and how they respond to tickets and emails in no time yet I still sit here after a week with my thumb up my ass and nothing to show for it.

You raised two tickets to which I have both replied please check your emails or use the ticket status update. This is NON Offical Bitmain Support.

Bitmain has acknowledged that what I am doing is okay. I provide TECHNICAL Support also Sales Support FOR New Low Custom Fee Orders + Coupon Discount Orders.

Please raise a case via email to webmaster + info @bitmaintech.com

OR speak to them on QQ Chat

Bitmain is a busy company but you should get a reply within 2 hours.

Please understand my ticket system is non official I  only provide support and sales for my agent as a re-seller for Bitmain

Tickets you raised 
Ticket #290858
Ticket #862954

[MoreBloodWine]

Funnily enough I seemed to have raised enough of stink to finally get a damn reply from BITMAIN after a week and spamming their inbox so here's hoping that goes well, and if not I wont be considering them for any future purchases and will tell other bitcoiners outside this forum of my horrendous experience.

[arczi19]

What sort of customs fee are you expecting to have CroverNo, when shipping to UK? I might be interested in getting a new Antminer.

[CroverNo]

What sort of customs fee are you expecting to have CroverNo, when shipping to UK? I might be interested in getting a new Antminer.

Hi,

Currently it is around £28 Via DHL or Fedex - My agent can sent multi Ants in 1 box with lower value you pay less for multi as only the 1 custom fee rather than a custom fee for every ant you get via Bitmain

Edit: If you make an order via Bitmain you can't then turn to me for low value custom fee on the Bitmain order! You would need to make the order with myself first which then I can apply the low custom fee charge.

Cheers

[Biffa]

Maybe if I use the ticket system BITMAIN will get off ass and actually say somethin... here's hoping it helps. If not, we'll see if he responds after I start posting all over FB and reddit.

Crovers ticket system is just his own not Bitmains.

Crover, do you follow the same price as the Bitmain site?

[CroverNo]

Maybe if I use the ticket system BITMAIN will get off ass and actually say somethin... here's hoping it helps. If not, we'll see if he responds after I start posting all over FB and reddit.

Crovers ticket system is just his own not Bitmains.

Correct - Although any tickets raised also get seen by Bitmain so its good that was as well as they can judge issues they are getting.

As I do weekly reports for them

Cheers

[Xer0]

Crover, are you ignoring me now? óo

[CroverNo]

Crover, are you ignoring me now? óo

Hi, I have no messages on here - no active tickets open on site.

Please PM me your ticket ref, I have replied to all tickets opened.

Cheers

[arczi19]

What sort of customs fee are you expecting to have CroverNo, when shipping to UK? I might be interested in getting a new Antminer.

Hi,

Currently it is around £28 Via DHL or Fedex - My agent can sent multi Ants in 1 box with lower value you pay less for multi as only the 1 custom fee rather than a custom fee for every ant you get via Bitmain

Edit: If you make an order via Bitmain you can't then turn to me for low value custom fee on the Bitmain order! You would need to make the order with myself first which then I can apply the low custom fee charge.

Cheers

That sounds good. Is there anyone who has successfully made an order through you and can vouch for you? Don't get me wrong, I just don't want to send my bitcoins to any first person that offers better deals than bitmain.

[Xer0]

Crover, are you ignoring me now? óo

Hi, I have no messages on here - no active tickets open on site.

Please PM me your ticket ref, I have replied to all tickets opened.

Cheers

that's the point: i got none

[CroverNo]

What sort of customs fee are you expecting to have CroverNo, when shipping to UK? I might be interested in getting a new Antminer.

Hi,

Currently it is around £28 Via DHL or Fedex - My agent can sent multi Ants in 1 box with lower value you pay less for multi as only the 1 custom fee rather than a custom fee for every ant you get via Bitmain

Edit: If you make an order via Bitmain you can't then turn to me for low value custom fee on the Bitmain order! You would need to make the order with myself first which then I can apply the low custom fee charge.

Cheers

That sounds good. Is there anyone who has successfully made an order through you and can vouch for you? Don't get me wrong, I just don't want to send my bitcoins to any first person that offers better deals than bitmain.

Hi Totally agree, tracking number from my agent: 1791933242 DHL can see how fast it arrived to UK.

Sadly I am not well known here only on eBay sadly

Thanks

[edgie13]

What sort of customs fee are you expecting to have CroverNo, when shipping to UK? I might be interested in getting a new Antminer.

Hi,

Currently it is around £28 Via DHL or Fedex - My agent can sent multi Ants in 1 box with lower value you pay less for multi as only the 1 custom fee rather than a custom fee for every ant you get via Bitmain

Edit: If you make an order via Bitmain you can't then turn to me for low value custom fee on the Bitmain order! You would need to make the order with myself first which then I can apply the low custom fee charge.

Cheers

That sounds good. Is there anyone who has successfully made an order through you and can vouch for you? Don't get me wrong, I just don't want to send my bitcoins to any first person that offers better deals than bitmain.

Hi Totally agree, tracking number from my agent: 1791933242 DHL can see how fast it arrived to UK.

Sadly I am not well known here only on eBay sadly

Thanks

Why not post some links to your past group buys on here?  It will help people to get to know your better.