jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
May 18, 2021, 06:34:18 AM |
|
It is normal... it nearly takes 5-6 minutes to complete get full Mhs in the 3060... Just wait a little bit. You can also put your OC to see the results... I'm getting more than 37Mhs without an aggresive OC You missunderstand me. 24mhash is not a good sign. After upgrade to 460 - works fine. It runs at 37,6Mhash. Nice hash too
|
|
|
|
philipma1957
Legendary
Online
Activity: 4172
Merit: 8061
'The right to privacy matters'
|
|
May 18, 2021, 12:33:25 PM |
|
SMOS
At
core -500 ram 1850
watts 111
gives me 36mh. cool and quiet
watts can drop to 100 and hash drops to 34
it has become an okay card
|
|
|
|
|
sacyrasi
Newbie
Offline
Activity: 11
Merit: 0
|
|
May 19, 2021, 06:48:26 AM |
|
He зaпycкaeт бoльшe 2 кapт 3060 из 7, вooбщe. He мoгy пoнять чтo eмy нe нpaвитcя.
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
May 19, 2021, 09:54:32 AM |
|
He зaпycкaeт бoльшe 2 кapт 3060 из 7, вooбщe. He мoгy пoнять чтo eмy нe нpaвитcя.
This is because you have the memory OC to high... he is repairing the DAG... you can see in miner log when it starts that says DAG repairing... it will take sometime before it starts. If you want to avoid that premium Feature you can add : --disable-dag-verify That will run all GPU without that check... but it is a good information that theses GPUs are not Silicion Lottery
|
|
|
|
Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
|
May 19, 2021, 09:29:08 PM |
|
Hi, is it possible to connect the api to the claymore monitor? I've been looking at the api options but haven't managed to monitor it, cheers!
|
|
|
|
ummasek
Member
Offline
Activity: 91
Merit: 10
|
|
May 20, 2021, 04:33:18 AM |
|
Just to compare somme NV GPU`s. --------------------------------------------- Statistics (07:30:38); Mining: Ethash Connected to: eu.ezil.me:5555 Uptime: 1h 20m 5s GPU 0 GPU 1 GPU 2 GPU 3 Name: GTX 1660 SU GTX 1070 Ti GTX 1660 Ti GTX 1660 Ti Speed (mh/s): 31.31 30.52 30.42 30.41 Pool (mh/s): 32.18 42.01 33.97 26.82 Shares (A/S/Hw): 36/0/0 47/0/0 38/0/0 30/0/0 Best Share: 71.8G 939.1G 300.1G 220.8G Power (W): 69.3 113.3 61.5 67.9 Efficiency (mh/s/W): 0.448 0.268 0.491 0.445 Temp (deg C): 65 64 66 66 Fan Speed (%): 27 66 51 40 GPU 4 GPU 5 GPU 6 GPU 7 Name: GTX 1660 SU GTX 1070 Ti GTX 1660 SU GTX 1660 SU Speed (mh/s): 31.30 30.66 31.31 31.02 Pool (mh/s): 28.60 38.44 29.50 31.28 Shares (A/S/Hw): 32/0/0 43/0/0 33/0/0 35/0/0 Best Share: 360.0G 165.7G 808.6G 166.0G Power (W): 73.2 114.3 75.8 62.5 Efficiency (mh/s/W): 0.425 0.267 0.410 0.492 Temp (deg C): 62 63 65 65 Fan Speed (%): 38 63 47 49 GPU 8 GPU 9 GPU 10 Total Name: GTX 1660 SU GTX 1070 Ti RTX 3060 Rig Speed (mh/s): 31.30 31.03 38.14 347.41 Pool (mh/s): 32.18 42.90 48.27 386.14 Shares (A/S/Hw): 36/0/0 48/0/0 54/0/0 432/0/0 Best Share: 432.3G 738.8G 382.8G 939.1G Power (W): 61.8 113.6 107.9 921.0 Efficiency (mh/s/W): 0.503 0.272 0.352 0.375 Temp (deg C): 64 63 66 Fan Speed (%): 28 64 54 --------------------------------------------- 3060 is way bechind 1660/3080 in matter of efficiency So let`s not compare it into 3060Ti/3070... 0.550 Mhash/Wat
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
May 20, 2021, 06:16:01 AM |
|
Hi, is it possible to connect the api to the claymore monitor? I've been looking at the api options but haven't managed to monitor it, cheers!
Teamredminer has an option to put to monitor with claymore's ethman. I already asked here 3 times if the lolminer dev can implement it, so far no answer. Let's hope the dev can implement it.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
Morph42
Jr. Member
Offline
Activity: 60
Merit: 2
|
|
May 20, 2021, 04:11:51 PM |
|
Trying to skim through this massive thread, but not seeing anything yet.
Typically I use AMD and Windows. And that has extra tools like Afterburner or AMDTweak. Good control over the cards (clock/fan) and gives a little extra boost. Understanding of flashing the bios.
I have another computer using Ubuntu with nVidia. Are there tools similar for nVidia cards? To either give greater control over the card or to give a boost? Not new to lolminer, just new to the nVidia half of it.
|
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
May 21, 2021, 02:01:20 PM |
|
Trying to skim through this massive thread, but not seeing anything yet.
Typically I use AMD and Windows. And that has extra tools like Afterburner or AMDTweak. Good control over the cards (clock/fan) and gives a little extra boost. Understanding of flashing the bios.
I have another computer using Ubuntu with nVidia. Are there tools similar for nVidia cards? To either give greater control over the card or to give a boost? Not new to lolminer, just new to the nVidia half of it.
Did you get it? also you can use nvidia-settings or nvidia-smi...
|
|
|
|
Morph42
Jr. Member
Offline
Activity: 60
Merit: 2
|
|
May 21, 2021, 02:48:39 PM |
|
Did you get it?
also you can use nvidia-settings or nvidia-smi...
nvidia-smi just gave me a text readout. Didn't see way to edit anything. [edit] check that... i did see the command nvidia-smi -i $GPU -lgc $VALUE .. but just looking into it a little more before messing with anything nvidia-settings brings me to a nice nVidia GUI that I can go through. but none of the settings are editable. (greyed out). at least they were until I stumbled upon this setting to modify the xorg.conf file to add in "coolbits 28". Now the nvidia-settings can be changed a little. I can modify the fan (which was one of my biggest things) Now just trying to see if I can play with the clock/mem settings at all
|
|
|
|
Morph42
Jr. Member
Offline
Activity: 60
Merit: 2
|
|
May 21, 2021, 05:43:47 PM |
|
Did you get it?
also you can use nvidia-settings or nvidia-smi...
nvidia-smi just gave me a text readout. Didn't see way to edit anything. [edit] check that... i did see the command nvidia-smi -i $GPU -lgc $VALUE .. but just looking into it a little more before messing with anything nvidia-settings brings me to a nice nVidia GUI that I can go through. but none of the settings are editable. (greyed out). at least they were until I stumbled upon this setting to modify the xorg.conf file to add in "coolbits 28". Now the nvidia-settings can be changed a little. I can modify the fan (which was one of my biggest things) Now just trying to see if I can play with the clock/mem settings at all I should add, this is a nVidia Quadro P1000 with 4GB of ram. nothing crazy. It's currently getting 7.51mHs. just trying to figure out how to tweak the power/cor/mem to get a little more out of it
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
May 22, 2021, 05:26:22 AM |
|
Did you get it?
also you can use nvidia-settings or nvidia-smi...
nvidia-smi just gave me a text readout. Didn't see way to edit anything. [edit] check that... i did see the command nvidia-smi -i $GPU -lgc $VALUE .. but just looking into it a little more before messing with anything nvidia-settings brings me to a nice nVidia GUI that I can go through. but none of the settings are editable. (greyed out). at least they were until I stumbled upon this setting to modify the xorg.conf file to add in "coolbits 28". Now the nvidia-settings can be changed a little. I can modify the fan (which was one of my biggest things) Now just trying to see if I can play with the clock/mem settings at all I should add, this is a nVidia Quadro P1000 with 4GB of ram. nothing crazy. It's currently getting 7.51mHs. just trying to figure out how to tweak the power/cor/mem to get a little more out of it If you have Graphical Interface, there you can change nvidia-settings easy, like increase memory speed for example.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4172
Merit: 8061
'The right to privacy matters'
|
|
May 22, 2021, 01:25:19 PM |
|
and the 3060 fix no longer works I dropped from 36-37 down to 25 in the middle of the night
new epoch seems to have killed off the fix
|
|
|
|
cudapop
Member
Offline
Activity: 93
Merit: 41
|
|
May 22, 2021, 02:02:36 PM |
|
and the 3060 fix no longer works I dropped from 36-37 down to 25 in the middle of the night
new epoch seems to have killed off the fix
Restarting the miner didn't fix it?
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
May 22, 2021, 06:30:10 PM |
|
and the 3060 fix no longer works I dropped from 36-37 down to 25 in the middle of the night
new epoch seems to have killed off the fix
Restart miner... I had the same problem... I put a Watchdog for next epoch change to detect it😊
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
May 24, 2021, 03:49:29 PM |
|
With the 3060... I have also problems in some cards with Drivers version 455.45.01 ... with 460.39 it is working perfectly. With the older it didn't push more than the 25Mhs...
|
|
|
|
philipma1957
Legendary
Online
Activity: 4172
Merit: 8061
'The right to privacy matters'
|
|
May 24, 2021, 07:31:05 PM |
|
reboot fixes it. it is back to 36+36 = 72/73 vs 25+25 = 50/51
|
|
|
|
Morph42
Jr. Member
Offline
Activity: 60
Merit: 2
|
|
May 24, 2021, 08:49:23 PM |
|
Just a general question to the group. I've been reading a number of articles over the past week. With China essential throwing the market a little crazy, it sounds like ETH is going to start making the big move to 'Proof of Stake' from 'Proof of Work'. No exact timeline as to when this will occur, but it sounds like it's going to happen. (and probably sooner rather than later) So what happens to all those mining ETH? Will it no longer be possible to do once this occurs? Will what we have mined increase in value because of the move and it's harder to obtain? And what would be the next switch to mine if not ETH? ETC still holds some value and is still mine-able. But perhaps we should be mining Thoughts? Discussion?
|
|
|
|
|