[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin

[ans34]

OXCoin really ok, if needed any help in testing - write. from 8 to 22 utc i'm here

[phm]

OXCoin really ok, if needed any help in testing - write. from 8 to 22 utc i'm here

Do you get at least some shares accepted? From my tests with this pool:

[23:24:18] Share submissions: 3124                   
[23:24:18] Accepted shares: 7                   
[23:24:18] Rejected shares: 3117

If there are accepted shares then algorithm is good, could be some problem with difficulty/target calculation. Could you try another pool?

[phm]

OXCoin really ok, if needed any help in testing - write. from 8 to 22 utc i'm here

Do you get at least some shares accepted? From my tests with this pool:

[23:24:18] Share submissions: 3124                    
[23:24:18] Accepted shares: 7                    
[23:24:18] Rejected shares: 3117

If there are accepted shares then algorithm is good, could be some problem with difficulty/target calculation. Could you try another pool?

I just tried these pools from the quark thread: http://176.221.46.81:8372/static/ and http://p2pool.org:8372. Everything looks good there. It could be a problem with the coinmine.pl pool, not with the miner.

[ans34]

I just tried these pools from the quark thread: http://176.221.46.81:8372/static/ and http://p2pool.org:8372. Everything looks good there. It could be a problem with the coinmine.pl pool, not with the miner.

Yeah, at that pool miner is working. Great job!

[MarcusDe]

My new stats, after little tuning my 280X cards, mining q2c:

 GPU  1:  46.0C 2937RPM | 4.885M/4.905Mh/s | R:  0.0% HW:0 WU:18.358/m I:16
 GPU  2:  51.0C 3079RPM | 4.881M/4.920Mh/s | R:  0.0% HW:0 WU:23.099/m I:16
 GPU  3:  46.0C 3080RPM | 4.840M/4.894Mh/s | R:  0.0% HW:0 WU:16.314/m I:16
 GPU  4:  43.0C 2960RPM | 4.868M/4.901Mh/s | R:  0.0% HW:0 WU:19.195/m I:16

They are REALLY cold!

[MarcusDe]

New quarkcoin.cl kernel gives me from 850 to 1100kH/s

Good job!

[ljudotina]

wow, really boosts speed in compare to default gpu miner on darkcoin and keeps gpu cold (52C on 280x).

I'm getting 2.146 Mh/s on 280x, did anyone get anything better? If so would you be nice to share your config?

[SharpNieSharp]

My new stats, after little tuning my 280X cards, mining q2c:

 GPU  1:  46.0C 2937RPM | 4.885M/4.905Mh/s | R:  0.0% HW:0 WU:18.358/m I:16
 GPU  2:  51.0C 3079RPM | 4.881M/4.920Mh/s | R:  0.0% HW:0 WU:23.099/m I:16
 GPU  3:  46.0C 3080RPM | 4.840M/4.894Mh/s | R:  0.0% HW:0 WU:16.314/m I:16
 GPU  4:  43.0C 2960RPM | 4.868M/4.901Mh/s | R:  0.0% HW:0 WU:19.195/m I:16

They are REALLY cold!

Could u give ur settings ?


Greetings

[unhooked]

My new stats, after little tuning my 280X cards, mining q2c:

 GPU  1:  46.0C 2937RPM | 4.885M/4.905Mh/s | R:  0.0% HW:0 WU:18.358/m I:16
 GPU  2:  51.0C 3079RPM | 4.881M/4.920Mh/s | R:  0.0% HW:0 WU:23.099/m I:16
 GPU  3:  46.0C 3080RPM | 4.840M/4.894Mh/s | R:  0.0% HW:0 WU:16.314/m I:16
 GPU  4:  43.0C 2960RPM | 4.868M/4.901Mh/s | R:  0.0% HW:0 WU:19.195/m I:16

They are REALLY cold!

What's being reported by the site?

Mine goes all the way to 6.7Mh/s which equates to a nice massive number on the pool site but then it gradually dwindles down to something like 1200 kh/s. It's the vardiff being assigned to my worked. It goes from 0.0016 to 8.

[sasha007]

DARK batch file settings for R9 280x tell me how?

[Pine]

Hi guys, im really newbe in this gpu mining and looking for advice here.
I want to mine Ducats(quark fork) with my 7850 radeon on p2p. Ive downloaded sgminer from 1st post, made a bat file like this

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=0
sgminer -k quarkcoin -o http://0x0a.nl:35858 -u 5rHurR94HYQiqb86rGjwsUu4Zxn5Sn5ng3 -p x -I 16 -g 4 -w 64

and its shows about 900khs. Does it even works or not? How can i improve it?

Thanks for any posts.

[MarcusDe]

@phm:

[21:06:16] Runtime: 6 hrs : 13 mins : 3 secs
[21:06:16] Average hashrate: ...
[21:06:16] Solved blocks: 0
[21:06:16] Best share difficulty: 8.5K
[21:06:16] Share submissions: 16
[21:06:16] Accepted shares: 16
[21:06:16] Rejected shares: 0

Well, all those shares were q2c blocks.
Afair in cgminer solved blocks were actually showing.

[child_harold]

Hi guys - is there a build for OSX?

thanks

[CommanderVenus]

Im mining BTQ (quark) on a p2pool with an ATI Radeon HD 5850 and getting an average between 850 - 900 Kh/s. It runs a lot cooler than it would be mining a scrypt coin. I may need to tweak a little to get my rejects down though.
A:6464  R:441  HW:0

Im running sgminer 4.1.0. Great miner!

[rajapatr1]

When i use Quark Coin it error

[11:25:32] Started sgminer 4.1.0



[11:25:34] Kernel quarkcoin is experimental.
[11:26:21] Error -11: Building Program (clBuildProgram)
[11:26:21] Error compiling program for search.
Frontend phase failed compilation.
Error: Creating kernel search failed!

[11:26:21] Failed to init GPU thread 0, disabling device 0
[11:26:21] Restarting the GPU from the menu will not fix this.
[11:26:21] Try restarting sgminer.
Press enter to continue:

How to slove when i enter program run and crash

[virrond]

Hi, I've got a problem with sgminer on Radeon HD5750. I'm mining quarks on p2pool and I get many many HW.
But the console is showing accepted shares.
http://s18.postimg.org/oeea8tugp/mine.jpg
Where is the problem?

[MarcusDe]

Hi, I've got a problem with sgminer on Radeon HD5750. I'm mining quarks on p2pool and I get many many HW.
But the console is showing accepted shares.

Where is the problem?

Try without -w -g options, lower intensity.
Next add them and try some values going up.

[virrond]

Without -w -g options does not solve the problem
This problem I've got only when I mine on p2pool, on other GUI pools I don't have any HW.

[pallas]

I can't get a decent darkcoin hashrate with my sapphire r9 290, while the other cards are ok.
It looks like the memory clock stays at 150 no matter what I do.
Any advice?

I did some other tests today, using the quark algorythm instead, forcing the clock with od6config: getting 1/5 the hashrate :-(

[CommanderVenus]

I tried using my usual scrypt settings while mining quark and i was getting trash for hashrate and a lot of hardware errors.
Then i tried these settings and everything is running great.
-I 16 -g 4 -w 64