seljo
Legendary
 Offline
Activity: 1179
Merit: 1014
Hodling since 2011.®
|
 |
May 22, 2014, 07:53:05 AM |
|
Ok anyone had some experience with ordering from Spondoolies, I just ordered SP10 and on my account page it says payment status pending and I payed in full with Bitpay option?
don't worry, it's a busy factory at the moment, they shipping from stock now so your order will be (i can only presume) processing. They answered my mail in like 4 minutes. quality service  you gonna love that rig! Almost 24 hours later the payment status is still pending I have no confirmation of any kind of payment except the address that was provided by Bitpay for payment???  Yet again people from Spondoolies were really, really fast (my wife doesn't reply that fast to me) on solving this and briniging my hopes, it will go smooth, up. |
Hodling since 2011.®
|
|
|
|
Bicknellski
|
|
May 22, 2014, 08:11:36 AM |
|
Ok anyone had some experience with ordering from Spondoolies, I just ordered SP10 and on my account page it says payment status pending and I payed in full with Bitpay option?
don't worry, it's a busy factory at the moment, they shipping from stock now so your order will be (i can only presume) processing. They answered my mail in like 4 minutes. quality service you gonna love that rig! Almost 24 hours later the payment status is still pending I have no confirmation of any kind of payment except the address that was provided by Bitpay for payment??? Yet again people from Spondoolies were really, really fast (my wife doesn't reply that fast to me) on solving this and briniging my hopes, it will go smooth, up. LOL! You need to rethink that statement. It is not really a bad thing. |
|
|
|
seljo
Legendary
Offline
Activity: 1179
Merit: 1014
Hodling since 2011.®
|
|
May 22, 2014, 08:18:41 AM |
|
Ok anyone had some experience with ordering from Spondoolies, I just ordered SP10 and on my account page it says payment status pending and I payed in full with Bitpay option?
don't worry, it's a busy factory at the moment, they shipping from stock now so your order will be (i can only presume) processing. They answered my mail in like 4 minutes. quality service you gonna love that rig! Almost 24 hours later the payment status is still pending I have no confirmation of any kind of payment except the address that was provided by Bitpay for payment??? Yet again people from Spondoolies were really, really fast (my wife doesn't reply that fast to me) on solving this and briniging my hopes, it will go smooth, up. LOL! You need to rethink that statement. It is not really a bad thing. We had a baby a month ago, we are constantly connected, she is at home and me working but technology is keeping us close. |
Hodling since 2011.®
|
|
|
GuolJa
Newbie
Offline
Activity: 10
Merit: 0
|
|
May 22, 2014, 08:19:18 AM |
|
Ok anyone had some experience with ordering from Spondoolies, I just ordered SP10 and on my account page it says payment status pending and I payed in full with Bitpay option?
don't worry, it's a busy factory at the moment, they shipping from stock now so your order will be (i can only presume) processing. They answered my mail in like 4 minutes. quality service you gonna love that rig! Almost 24 hours later the payment status is still pending I have no confirmation of any kind of payment except the address that was provided by Bitpay for payment??? https://i.imgur.com/TkSMQIx.jpgYet again people from Spondoolies were really, really fast (my wife doesn't reply that fast to me) on solving this and briniging my hopes, it will go smooth, up. You are in for a treat. My experience with Spondoolies times and hosting services has been outstanding so far: fast responses, nice compromises when we had doubts or problems, friendly and professional support... finally a proper customer-focused company. |
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 22, 2014, 09:39:16 AM |
|
|
|
|
|
seljo
Legendary
Offline
Activity: 1179
Merit: 1014
Hodling since 2011.®
|
|
May 22, 2014, 09:58:04 AM |
|
I have been looking at Dawson Quick Start Guide the prerequisites part and I don't think you actually need CAT 6 Ethernet cable CAT 5e will be more than sufficient for that purpose. Also have a question about serial console port about serial settings baud rate, parity, flow control and does it work with Cisco console "the blue" cable or some different pinout? |
Hodling since 2011.®
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 22, 2014, 10:03:05 AM
Last edit: May 22, 2014, 10:16:35 AM by Spondoolies-Tech |
|
I have been looking at Dawson Quick Start Guide the prerequisites part and I don't think you actually need CAT 6 Ethernet cable CAT 5e will be more than sufficient for that purpose. Also have a question about serial console port about serial settings baud rate, parity, flow control and does it work with Cisco console "the blue" cable or some different pinout? CAT 5e will be sufficient. We don't ship with the serial console cable. If you're interested to purchase it, please contact sales@ I'm not sure it's compatible with Cisco console "the blue" cable, it was custom produced by us. You don't need it for daily operation, you might want it if you want to develop. |
|
|
|
seljo
Legendary
Offline
Activity: 1179
Merit: 1014
Hodling since 2011.®
|
|
May 22, 2014, 10:17:52 AM |
|
I have been looking at Dawson Quick Start Guide the prerequisites part and I don't think you actually need CAT 6 Ethernet cable CAT 5e will be more than sufficient for that purpose. Also have a question about serial console port about serial settings baud rate, parity, flow control and does it work with Cisco console "the blue" cable or some different pinout? CAT 5e will be sufficient. We don't ship with the serial console cable. If you're interested in purchasing it, please contact sales@ I'm not sure it's compatible with Cisco console "the blue" cable, it was custom produced by us. You don't need it for daily operation, you might want it if you want to develop. So there is no option to setup the miner trough CLI only web GUI? |
Hodling since 2011.®
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 22, 2014, 10:19:27 AM |
|
I have been looking at Dawson Quick Start Guide the prerequisites part and I don't think you actually need CAT 6 Ethernet cable CAT 5e will be more than sufficient for that purpose. Also have a question about serial console port about serial settings baud rate, parity, flow control and does it work with Cisco console "the blue" cable or some different pinout? CAT 5e will be sufficient. We don't ship with the serial console cable. If you're interested in purchasing it, please contact sales@ I'm not sure it's compatible with Cisco console "the blue" cable, it was custom produced by us. You don't need it for daily operation, you might want it if you want to develop. So there is no option to setup the miner trough CLI only web GUI? Sure there is, you can ssh to the miner: root / root |
|
|
|
seljo
Legendary
Offline
Activity: 1179
Merit: 1014
Hodling since 2011.®
|
|
May 22, 2014, 10:47:45 AM |
|
I have been looking at Dawson Quick Start Guide the prerequisites part and I don't think you actually need CAT 6 Ethernet cable CAT 5e will be more than sufficient for that purpose. Also have a question about serial console port about serial settings baud rate, parity, flow control and does it work with Cisco console "the blue" cable or some different pinout? CAT 5e will be sufficient. We don't ship with the serial console cable. If you're interested in purchasing it, please contact sales@ I'm not sure it's compatible with Cisco console "the blue" cable, it was custom produced by us. You don't need it for daily operation, you might want it if you want to develop. So there is no option to setup the miner trough CLI only web GUI? Sure there is, you can ssh to the miner: root / root Thank you for your answers I think I will enjoy your product very much. |
Hodling since 2011.®
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
May 22, 2014, 12:21:36 PM |
|
Me and my dad are on the fence about this. It would be just one SP10 for each of us. We are already running a KNC Jupiter and would love to keep both miners in the same room, but at 110V the AMPS get all the way up to 10-11amps. That's basically an entire circuit we need to find that isn't being used by anything or get to the home depot and run our own lines into the room.
Does the SP10 run better or more efficient if it is plugged into a 220V line than a 110V line? Does it run better?
|
|
|
|
|
tzortz
|
|
May 22, 2014, 12:24:15 PM |
|
Got them !  |
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 22, 2014, 01:10:00 PM |
|
Got them !
You have room to many more  Nice setup |
|
|
|
|
QuiveringGibbage
|
|
May 22, 2014, 01:21:16 PM |
|
Got them !
me 'two'.. Current stats at the Ozcoin mining pool - [21:48:51] *ozbot* | linguaefelis | 5311443 shares (12 stales; 0.0%) | avg 1488344 MH/s |
[21:48:53] *ozbot* | princeps | 5236319 shares (22 stales; 0.0%) | avg 1425220 MH/s |
[22:29:11] <+QG> .e
[22:29:12] <@ozbot> At 2895 GH/s, you should earn 0.16444913 BTC/day ($84.06) on average (0.00685205 BTC/hr) more pics here: http://imgur.com/a/mRbMZ#ZZd203T Cheers, QG PS: They are for sale in Sydney, Australia too!! PM me |
Bitcoin is at the tippity top of the mountain...but it's really only half way up.. |
|
|
|
tzortz
|
|
May 22, 2014, 01:41:34 PM |
|
Got them !
You have room to many more Nice setup Thanks! I am making preparations for my 10x SP30 order ! Let's see if I have space for a few more SP10, I will pm you for details. |
All is Mine!
1H7LUdfx9AFTMSXPsCBror3RDk57zgnc2R
|
|
|
|
Collider
|
|
May 22, 2014, 02:43:55 PM |
|
Tzortz what is the temp in your room?
Is it AC´d?
|
|
|
|
|
|
bobsag3
|
|
May 22, 2014, 03:00:46 PM |
|
 It begins. Have quite a few more than listed in this pic, trying out different racks and wiring, I hate it looking like a mess  |
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
May 22, 2014, 03:12:56 PM |
|
|
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
|
May 22, 2014, 03:53:59 PM |
|
Such a nice product. It's a shame the price is too high for me. |
Buy & Hold
|
|
|
|
wpgdeez
|
|
May 22, 2014, 03:56:10 PM |
|
It begins. Have quite a few more than listed in this pic, trying out different racks and wiring, I hate it looking like a mess I plan on running mine on the side since the bottoms get hot. How much per unit import fees? |
|
|
|
|
|
