Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee

[primeGPU]

its been almost a month since your last update and leaving us in the dark with no status update seems just wrong

Well, we don't have any news to report. We're still working on a new version.

also u mean 7+ as claymores gets that on a 7970

I might have missed the new version. With 10.1 you had 6.6 (What are the clocks btw?):

make up to 6.6cpd on a 12 core mobo with 7970 5.9cpd on a dual

9.1cpd on 290x's

[kev7112001]

its been almost a month since your last update and leaving us in the dark with no status update seems just wrong

Well, we don't have any news to report. We're still working on a new version.

also u mean 7+ as claymores gets that on a 7970

I might have missed the new version. With 10.1 you had 6.6 (What are the clocks btw?):

make up to 6.6cpd on a 12 core mobo with 7970 5.9cpd on a dual

9.1cpd on 290x's

i have 1 7970 getting 6.6 but that cause its only a dual core anything higher it 7+
clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170

[primeGPU]

i have 1 7970 getting 6.6 but that cause its only a dual core anything higher it 7+
clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170

It's a single 7970, i.e. not a 5 card setup, right?

[kev7112001]

i have 1 7970 getting 6.6 but that cause its only a dual core anything higher it 7+
clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170

It's a single 7970, i.e. not a 5 card setup, right?

for xpm i have them all in single cards setups

[primeGPU]

Version 3.0 is available.

The mining speed is now 8.3 CPD on a 280x (clocks: 1040/1050) with almost no CPU usage.

This is a pool version. It should work with any pool supporting XPT protocol.
The miner works 80% of the time with the pool, and 20% it works solo. Upon finding a block when mining solo, 50% of its value go to dev.fee. (I.e. the miner has a 10% dev.fee)

The new version is available here:
http://primegpu.com/files/primegpu-pool.zip

Paid version (100% pool, no solo) is available for download from
http://primegpu.com/files/primegpu-pool-paid.zip

The miner has been tested with these pools:

xpm.minin.gs (Edit: seems to be down ATM):
primegpu-pool.exe -o xpm.minin.gs:10034 -u XPM_ADDRESS -p x

ypool.net:
primegpu-pool.exe -o ypool.net -u USERNAME -a XPM_ADDRESS -p x


Note:
- Catalyst 14.3+ is required
- you need to have the official primecoin wallet installed on the mining rig
- the blockchain should be updated prior to running the miner
- the wallet application must be closed when running the miner

[primeGPU]

There was a bug in error-reporting functionallity.
If the miner displayed any kind of errors for you, please re-download it from the same url.

[LongAndShort]

Tested on one 290x 1070/1250 the only thing using cpu is the cpp and not the actual process or mining



EDIT: if Bitcointalk still isn't showing the picture you can see it HERE

[primeGPU]

EDIT: if Bitcointalk still isn't showing the picture you can see it HERE

10.23 is kinda low for 290x. Could you check what is GPU load? It should be 98-99%, if not, please try running the miner not using CPU in other tasks.

[drozenski]

iis this even an active pool?

no miners in over a month

minin.gs

[primeGPU]

Ok, so we decided to make a 100% pool version for ypool (10% dev.fee).
You can download it from here:
http://primegpu.com/files/primegpu-ypool.zip

Next, we're going to have a special version for Beeeeer (in a week or so).

[urubu]

Looks like some good improvements in the numbers.  Why no paid solo version?

[primeGPU]

Looks like some good improvements in the numbers.  Why no paid solo version?

Will be available within a week.

[urubu]

will this current version work with beeeer?

[primeGPU]

will this current version work with beeeer?

Nope, beeeer doesn't support XPT protocol.

[primeGPU]

Version 3.01 is available for Ypool.

- fixed disconnection issue
- "-d" option allows to select on which GPUs to run the miner ("-d 13" uses GPUs #1 and #3)

http://primegpu.com/files/primegpu-ypool.zip

[djm34]

Ok, so we decided to make a 100% pool version for ypool (10% dev.fee).
You can download it from here:
http://primegpu.com/files/primegpu-ypool.zip

Next, we're going to have a special version for Beeeeer (in a week or so).

10% dev for a dead coin...   (sorry a coin you largely contributed to kill)
what a joke, you are even more greedy than claymore  

[primeGPU]

10% dev for a dead coin...

XPM is far from dead.

Our paid customers mine at ~8.2 XPM/day per 280x. It's 3 usd/day with the current network difficulty and prices.
With the fee version it's 2,7 usd/day.

[snaidervp]

10% dev for a dead coin...

feel free to code a faster miner with 1% fee if you like..

dead coin... lol

[gilad215]

gettin about 48-50CPD with 4x280x and 2x290 on same rig, gpu usage is jumping and cpu usage is 70%+ with pentium haswell..
certainly not the most i can get from this rig. you guys said minimum cpu usage and i don't see it.

[snaidervp]

gettin about 48-50CPD with 4x280x and 2x290 on same rig, gpu usage is jumping and cpu usage is 70%+ with pentium haswell..
certainly not the most i can get from this rig. you guys said minimum cpu usage and i don't see it.

2 thread pentium is not enough for 6 gpu's