Schild_
|
|
August 11, 2014, 11:57:12 AM |
|
upppsss !!!! I feel sorry for Shadowcoin Sorry guys could not resist. Rynomster deserved it for how he left Cinni "family problems" Lol. I hold SDC and Librex too! I really thought the dev was a scammer.
|
|
|
|
pawlo74
|
|
August 11, 2014, 12:06:58 PM |
|
Anyway I hold SDC too not many but always BUT STILL BELIVE IN CINNI Prepared to loose all on Cinni never mind
|
|
|
|
smalltimer
|
|
August 11, 2014, 01:09:23 PM |
|
shitcoin of magnitude. I lost about 20% of my balance to the nirvana. Blockexplorer shows it is there but my wallet shows it not. So how do i get my coins back from nirvana?
Use cmd than CinniCoin-qt.exe -rescan you won't loose any coin is good to use also Cinnicoin wallet/help/debug window/Console type repairwallet isn't that complicate it is unbelievable SIMPLE rescan didn't solve it. Salvage wallet also not - salvage wallet just corrupted it. I will try repairwallet in console later today. Thanks for advice.
|
|
|
|
pawlo74
|
|
August 11, 2014, 01:40:25 PM |
|
shitcoin of magnitude. I lost about 20% of my balance to the nirvana. Blockexplorer shows it is there but my wallet shows it not. So how do i get my coins back from nirvana?
Use cmd than CinniCoin-qt.exe -rescan you won't loose any coin is good to use also Cinnicoin wallet/help/debug window/Console type repairwallet isn't that complicate it is unbelievable SIMPLE rescan didn't solve it. Salvage wallet also not - salvage wallet just corrupted it. I will try repairwallet in console later today. Thanks for advice. Don't remember now what order, first rescan than repairwallet or first repairwallet but sorted problem with missing coins.
|
|
|
|
digit
Legendary
Offline
Activity: 1672
Merit: 1010
|
|
August 11, 2014, 02:00:24 PM Last edit: August 11, 2014, 02:13:07 PM by digit |
|
shitcoin of magnitude. I lost about 20% of my balance to the nirvana. Blockexplorer shows it is there but my wallet shows it not. So how do i get my coins back from nirvana?
Use cmd than CinniCoin-qt.exe -rescan you won't loose any coin is good to use also Cinnicoin wallet/help/debug window/Console type repairwallet isn't that complicate it is unbelievable SIMPLE rescan didn't solve it. Salvage wallet also not - salvage wallet just corrupted it. I will try repairwallet in console later today. Thanks for advice. dumpprivkey for each address you own that has a balance, pay attention to change addresses you might have. delete wallet.dat (backup first, and rename it old). importprivkey to the new wallet.dat. it will take a moment to import each address. restart the wallet with -rescan. your wallet will be showing the correct amount. dont ever use salvagewallet, its meant to be used as a last ditch attempt to retreive a corrupted wallet.dat because of power failure/bad write etc. Use repairwallet in console everytime before sending/spending cinni and after staking to prevent the stuck transactions from happening, it takes just a few seconds and corrects the wallet balance after PoS. Stuck transactions occur because PoS gives the wrong number back to wallet sometimes and so it tries to spend from inputs that dont exist. repairwallet is a workaround to prevent this.
|
|
|
|
cinblo
|
|
August 11, 2014, 04:22:57 PM |
|
codecaffeinecode, thank you for the work you are doing about privacy / anon, you're already doing a review of the source code to fix some bugs, I suggest you to replace the xmmintrin.h library with a more standard, in this way, the source code can also be compiled on embedded systems, cpu and systems with low power consumption and also ARM processors, so, Cinni wallet you can install on many more architectures even if you do not support SSE like others cryptocurrencies today.
|
|
|
|
|
newra
|
|
August 11, 2014, 04:40:50 PM |
|
Please leave the rate at 3.5%, if anything it should be changed to 2%
|
|
|
|
janim2
Newbie
Offline
Activity: 11
Merit: 0
|
|
August 11, 2014, 04:42:43 PM Last edit: August 11, 2014, 06:24:09 PM by janim2 |
|
Can anyone explain to me why Cinnicoin's anon transactions are different than darkcoin?
|
|
|
|
newra
|
|
August 12, 2014, 04:52:49 AM |
|
The "wallet withdrawal issues" are strange because they seem to happen with multiple coins when mintpal and others have no problems.
That could be explained if Mintpal wasn't staking and Cryptsy was From my understanding the dev you are complaining about did a great job with CINNI on the project he was hired to do. Without him we would not have our EM platform to build upon.
Agreed. Rynomster did an excellent job while he was here and for whatever reasons he decided to move on. Deal with it like you would when people switch jobs in every day life. Lets focus on CINNI and not be negative to other coins/developers.
+1
|
|
|
|
pawlo74
|
|
August 12, 2014, 05:44:18 AM Last edit: August 12, 2014, 09:41:27 AM by pawlo74 |
|
The "wallet withdrawal issues" are strange because they seem to happen with multiple coins when mintpal and others have no problems.
That could be explained if Mintpal wasn't staking and Cryptsy was From my understanding the dev you are complaining about did a great job with CINNI on the project he was hired to do. Without him we would not have our EM platform to build upon.
Agreed. Rynomster did an excellent job while he was here and for whatever reasons he decided to move on. Deal with it like you would when people switch jobs in every day life. Lets focus on CINNI and not be negative to other coins/developers.
+1 That's absolutely fine unless they left without "leaving notice" but never mind yes you are right let's focus on Cinni.
|
|
|
|
mig5000
|
|
August 12, 2014, 10:10:07 AM |
|
This coin is sending really mixed signals...
Why would you pay a .5 BTC bounty for a stupid logo if the coin is most likely dead?
But at the same time, dev is inactive on the forum, IRC is dead. Doesn't look like anybody's doing anything. No leadership. Github dead.
Not sure what to think really. Where is the Bounty money coming from ?
|
|
|
|
CinniCoin (OP)
Sr. Member
Offline
Activity: 377
Merit: 250
DON'T INVOLVE ME IN EVIL NAMES. BYE
|
|
August 12, 2014, 11:28:47 AM |
|
This coin is sending really mixed signals...
Why would you pay a .5 BTC bounty for a stupid logo if the coin is most likely dead?
But at the same time, dev is inactive on the forum, IRC is dead. Doesn't look like anybody's doing anything. No leadership. Github dead.
Not sure what to think really. Where is the Bounty money coming from ?
Cinni isn't dead. Also I will do something soon that will be really good. Hold your coins please.
|
DON'T INVOLVE ME IN EVIL NAMES. BYE
|
|
|
pawlo74
|
|
August 12, 2014, 11:34:36 AM |
|
This coin is sending really mixed signals...
Why would you pay a .5 BTC bounty for a stupid logo if the coin is most likely dead?
But at the same time, dev is inactive on the forum, IRC is dead. Doesn't look like anybody's doing anything. No leadership. Github dead.
Not sure what to think really. Where is the Bounty money coming from ?
Cinni isn't dead. Also I will do something soon that will be really good. Hold your coins please. Cheers
|
|
|
|
smalltimer
|
|
August 12, 2014, 12:56:05 PM |
|
shitcoin of magnitude. I lost about 20% of my balance to the nirvana. Blockexplorer shows it is there but my wallet shows it not. So how do i get my coins back from nirvana?
Use cmd than CinniCoin-qt.exe -rescan you won't loose any coinis good to use also Cinnicoin wallet/help/debug window/Console type repairwallet isn't that complicate it is unbelievable SIMPLE repairwallet and rescan afterwards didn't solve it dumpprivkey for each address you own that has a balance, pay attention to change addresses you might have. delete wallet.dat (backup first, and rename it old). importprivkey to the new wallet.dat. it will take a moment to import each address. restart the wallet with -rescan. your wallet will be showing the correct amount.
dont ever use salvagewallet, its meant to be used as a last ditch attempt to retreive a corrupted wallet.dat because of power failure/bad write etc.
Use repairwallet in console everytime before sending/spending cinni and after staking to prevent the stuck transactions from happening, it takes just a few seconds and corrects the wallet balance after PoS. Stuck transactions occur because PoS gives the wrong number back to wallet sometimes and so it tries to spend from inputs that dont exist. repairwallet is a workaround to prevent this.
dumpprivkey gives me out "Private key for adress [myadress] is not known " so what do i do now?
|
|
|
|
MisO69
Legendary
Offline
Activity: 1946
Merit: 1005
My mule don't like people laughing
|
|
August 12, 2014, 01:10:36 PM |
|
shitcoin of magnitude. I lost about 20% of my balance to the nirvana. Blockexplorer shows it is there but my wallet shows it not. So how do i get my coins back from nirvana?
Use cmd than CinniCoin-qt.exe -rescan you won't loose any coinis good to use also Cinnicoin wallet/help/debug window/Console type repairwallet isn't that complicate it is unbelievable SIMPLE repairwallet and rescan afterwards didn't solve it dumpprivkey for each address you own that has a balance, pay attention to change addresses you might have. delete wallet.dat (backup first, and rename it old). importprivkey to the new wallet.dat. it will take a moment to import each address. restart the wallet with -rescan. your wallet will be showing the correct amount.
dont ever use salvagewallet, its meant to be used as a last ditch attempt to retreive a corrupted wallet.dat because of power failure/bad write etc.
Use repairwallet in console everytime before sending/spending cinni and after staking to prevent the stuck transactions from happening, it takes just a few seconds and corrects the wallet balance after PoS. Stuck transactions occur because PoS gives the wrong number back to wallet sometimes and so it tries to spend from inputs that dont exist. repairwallet is a workaround to prevent this.
dumpprivkey gives me out "Private key for adress [myadress] is not known " so what do i do now? Did you unlock you wallet? Walletpassphrase xxx 9999 then try the dumpprivkey command.
|
|
|
|
digit
Legendary
Offline
Activity: 1672
Merit: 1010
|
|
August 12, 2014, 01:12:31 PM |
|
shitcoin of magnitude. I lost about 20% of my balance to the nirvana. Blockexplorer shows it is there but my wallet shows it not. So how do i get my coins back from nirvana?
Use cmd than CinniCoin-qt.exe -rescan you won't loose any coinis good to use also Cinnicoin wallet/help/debug window/Console type repairwallet isn't that complicate it is unbelievable SIMPLE repairwallet and rescan afterwards didn't solve it dumpprivkey for each address you own that has a balance, pay attention to change addresses you might have. delete wallet.dat (backup first, and rename it old). importprivkey to the new wallet.dat. it will take a moment to import each address. restart the wallet with -rescan. your wallet will be showing the correct amount.
dont ever use salvagewallet, its meant to be used as a last ditch attempt to retreive a corrupted wallet.dat because of power failure/bad write etc.
Use repairwallet in console everytime before sending/spending cinni and after staking to prevent the stuck transactions from happening, it takes just a few seconds and corrects the wallet balance after PoS. Stuck transactions occur because PoS gives the wrong number back to wallet sometimes and so it tries to spend from inputs that dont exist. repairwallet is a workaround to prevent this.
dumpprivkey gives me out "Private key for adress [myadress] is not known " so what do i do now? you might be entering it wrong. also the wallet should be unlocked, then enter dumpprivkey <bitcoinaddress> in console for each address in turn. after restarting with new wallet.dat, enter in console importprivkey <bitcoinprivkey> [giveitanameornot] for each privatekey you want in this new wallet.dat parameters in brackets are optional, if you only have one privatekey to import, you can tack on rescan=true to importprivkey and it will rescan without the need to restart the wallet. more then one privatekey its simpler to import them all, then restart the CinniCoin-qt.exe with -rescan using CMD or a shortcut with that added.
|
|
|
|
smalltimer
|
|
August 12, 2014, 01:35:11 PM |
|
i didn't unlock. Trying now. Thanks for guidance.
|
|
|
|
smalltimer
|
|
August 12, 2014, 03:26:05 PM |
|
shitcoin of magnitude. I lost about 20% of my balance to the nirvana. Blockexplorer shows it is there but my wallet shows it not. So how do i get my coins back from nirvana?
Use cmd than CinniCoin-qt.exe -rescan you won't loose any coinis good to use also Cinnicoin wallet/help/debug window/Console type repairwallet isn't that complicate it is unbelievable SIMPLE repairwallet and rescan afterwards didn't solve it dumpprivkey for each address you own that has a balance, pay attention to change addresses you might have. delete wallet.dat (backup first, and rename it old). importprivkey to the new wallet.dat. it will take a moment to import each address. restart the wallet with -rescan. your wallet will be showing the correct amount.
dont ever use salvagewallet, its meant to be used as a last ditch attempt to retreive a corrupted wallet.dat because of power failure/bad write etc.
Use repairwallet in console everytime before sending/spending cinni and after staking to prevent the stuck transactions from happening, it takes just a few seconds and corrects the wallet balance after PoS. Stuck transactions occur because PoS gives the wrong number back to wallet sometimes and so it tries to spend from inputs that dont exist. repairwallet is a workaround to prevent this.
dumpprivkey gives me out "Private key for adress [myadress] is not known " so what do i do now? you might be entering it wrong. also the wallet should be unlocked, then enter dumpprivkey <bitcoinaddress> in console for each address in turn. after restarting with new wallet.dat, enter in console importprivkey <bitcoinprivkey> [giveitanameornot] for each privatekey you want in this new wallet.dat parameters in brackets are optional, if you only have one privatekey to import, you can tack on rescan=true to importprivkey and it will rescan without the need to restart the wallet. more then one privatekey its simpler to import them all, then restart the CinniCoin-qt.exe with -rescan using CMD or a shortcut with that added. ok, i was doing unlock, dumprivkey and import that into a new wallet. The amount it shows now is a slightly different than what the old wallet was showing (less than 1 coin difference) but my missing coins are still not there. Explorer shows them though. Are those coins lost? How did that happen? Is there something else i could try? yes, i was rescanning it after importing privkey - still nothing. Where did the coins go and why do they not show when they show in the explorer? I don't get it.
|
|
|
|
Ignition
Newbie
Offline
Activity: 14
Merit: 0
|
|
August 12, 2014, 08:14:00 PM |
|
Seems like a bot is trying to lower the price on Mintapal. Any thoughts? In any case, prices are lower relative to other markets, cheap cinni before codedcaffiene revitalizes it.
|
|
|
|
|