[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[bleauhaus]

hey guys, I'm mining with 2 L3+ so far and was wondering if you can delete miners from the list? I want to set up profit switching for "External Profit switching" because as far as I can tell that is what you use for ASICs. I'm guessing the "managed miners" is only for GPU's? Well the only way i can see to add them as external profit swithching is to use the "add miners/scan network" feature. However I can't do that because I already have the miners added. Thus I would like to remove them and readd them as profit switching miner.s

Options > External/Managed Miner > Remove

[whoisthismanoO]

 * New trigger to detect low device count for a miner, to find out when a GPU is missing

After about 10 days I can report, that this future is not working properly.
Often happens that miner falls, AM restarts them, all videocards are in place I see, but the trigger reports that there one GPU is missing.

[acyclovir]

Hi Patrike there is problem with readings in "view details" of the AntMiners with MiningPoolHub, pool is not taken in count because profit readings always are 0 or negative

[patrike]

 * New trigger to detect low device count for a miner, to find out when a GPU is missing

After about 10 days I can report, that this future is not working properly.
Often happens that miner falls, AM restarts them, all videocards are in place I see, but the trigger reports that there one GPU is missing.

Was the miner first restarted and then the trigger indicates a missing GPU, or did you define a rule that restart the miner when there is a missing GPU?

[patrike]

Hi Patrike there is problem with readings in "view details" of the AntMiners with MiningPoolHub, pool is not taken in count because profit readings always are 0 or negative

Please let me know the exact URL incl port for this Mining Pool Hub pool. Awesome Miner should support several of them, but maybe not all.

[patrike]

General information about zpool: They just switched their profit reporting for Scrypt (similar to what Nicehash did a few days ago), making the profit values look 1000 timer larger than normal.

I will soon release a new version of Awesome Miner to adjust to their change.

[acyclovir]

Hi Patrike there is problem with readings in "view details" of the AntMiners with MiningPoolHub, pool is not taken in count because profit readings always are 0 or negative

Please let me know the exact URL incl port for this Mining Pool Hub pool. Awesome Miner should support several of them, but maybe not all.

Ports for MiningPoolHub: 12001 for scrypt and 12007 for x11; also i have noticed today, zpool.ca is reporting excesive profit over 13.000 USD/Day or more, thats impossible with only 1 L3+ 

[patrike]

Awesome Miner version 4.1.2

- Feature Preview: Notifications via Telegram when using Cloud Services (During preview phase the limit is 10 messages per hour. Add @CloudServicesBot)
- Increase from 5 to 7 customizable coins with exchange rates in the status bar
- Awesome Miner API includes ASIC miner hardware type in response
- Support alias "[ComputerName]" in "Add to worker name" setting for a Managed Miner
- Added New Zealand dollar as display currency
- Adjust to recent change for Zpool Scrypt, where profitability is specified in TH/s instead of GH/s

This release includes a preview of the Telegram notification feature. It works similar to the SMS notification feature, where notifications from Awesome Miner can be sent to a mobile device. Please let me know any feedback you have on this feature. For instructions how to use, please see:
http://www.awesomeminer.com/help/telegram.aspx

[patrike]

Hi Patrike there is problem with readings in "view details" of the AntMiners with MiningPoolHub, pool is not taken in count because profit readings always are 0 or negative

Please let me know the exact URL incl port for this Mining Pool Hub pool. Awesome Miner should support several of them, but maybe not all.

Ports for MiningPoolHub: 12001 for scrypt and 12007 for x11; also i have noticed today, zpool.ca is reporting excesive profit over 13.000 USD/Day or more, thats impossible with only 1 L3+  

Have you made sure that these pools are configured with the coin set to "Unspecified Scrypt" / "Unspecified X11"? These pools are not for mining a specific coin.

The latest release adjusts to the Zpool Scrypt profit reporting change.

[cryptoinvestor_x]

I have a .bat file that specifies core and memory overclocks dependent on each algo template. Currently I am remoting and running these .bats before switching templates.

I noticed there's a section to run the same commands but what directory should I specify to run the .bat from?

Is there a folder I should place the .bat in or do I specify the commands in that box?


It's info like this:

SET GPU0=-setBaseClockOffset:0,0,125 -setMemoryClockOffset:0,0,450 -setPowerTarget:0,77 -setTempTarget:0,0,75 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,125 -setMemoryClockOffset:1,0,450 -setPowerTarget:1,77 -setTempTarget:1,0,75 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,125 -setMemoryClockOffset:2,0,450 -setPowerTarget:2,77 -setTempTarget:2,0,75 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,125 -setMemoryClockOffset:3,0,450 -setPowerTarget:3,77 -setTempTarget:3,0,75 -forcepstate:3,0

[fvineyard]

Can someone try to Display a chart under Tools \ Performance History and post whether it works or not. Export to CSV does work, but not charts (for me). Mine has not worked for the last two versions. Not sure when it stopped working for me.

Thanks!

[puwaha]

I have a .bat file that specifies core and memory overclocks dependent on each algo template. Currently I am remoting and running these .bats before switching templates.

I noticed there's a section to run the same commands but what directory should I specify to run the .bat from?

Is there a folder I should place the .bat in or do I specify the commands in that box?


It's info like this:

SET GPU0=-setBaseClockOffset:0,0,125 -setMemoryClockOffset:0,0,450 -setPowerTarget:0,77 -setTempTarget:0,0,75 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,125 -setMemoryClockOffset:1,0,450 -setPowerTarget:1,77 -setTempTarget:1,0,75 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,125 -setMemoryClockOffset:2,0,450 -setPowerTarget:2,77 -setTempTarget:2,0,75 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,125 -setMemoryClockOffset:3,0,450 -setPowerTarget:3,77 -setTempTarget:3,0,75 -forcepstate:3,0

You add these extra settings in the "command line" parameters in either the pool or miner settings.  Awesome Miner is creating the equivalent of a .bat file from all of the settings you enter in the GUI.  The point of a product like AM is that you don't have to remote in and configure bat files anymore.

[puwaha]

Can someone try to Display a chart under Tools \ Performance History and post whether it works or not. Export to CSV does work, but not charts (for me). Mine has not worked for the last two versions. Not sure when it stopped working for me.

Thanks!

Doesn't seem to work for me either.  I can't export to CSV either.

[narousberg]

New automatic update from 4.1.1 to 4.1.2 not work.
After update procedure, program still stay on ver. 4.1.1

[patrike]

Can someone try to Display a chart under Tools \ Performance History and post whether it works or not. Export to CSV does work, but not charts (for me). Mine has not worked for the last two versions. Not sure when it stopped working for me.

Thanks!

Doesn't seem to work for me either.  I can't export to CSV either.

Thanks for pointing this out, I will correct it. The issue is related to when the end date is in standard time and there are parts of the data in daylight saving time.

[patrike]

New automatic update from 4.1.1 to 4.1.2 not work.
After update procedure, program still stay on ver. 4.1.1

If there are pending upgrades for Windows Update, Windows may prevent other installation software from running. The solution is to reboot the computer, where Windows Update will perform the required tasks. After the reboot, it will be possible to upgrade Awesome Miner. Sometimes security software can also prevent application upgrades.

In addition to using the upgrade feature inside Awesome Miner, the latest version of the software can also be downloaded and installed from the web site.

[ordimans]

It's possible to add Nicehash Algorithm on coins page ?

[cashen]

Can I use awesome miner to profit switch on a Baikal miner?

I don't have any reports from users of Baikal miners on this, so I actually don't know. If the "Prioritize" button is working when you select one of the pools on the miner, the External Profit Switcher will work as well. Setup instructions:
http://www.awesomeminer.com/help/profitswitching.aspx#externalprofit

I have a Baikal, and it works if you setup a pool group to do profit switching, or to mine a single pool directly.  But, if you are looking to switch algorithms on a Baikal, you should use the built in support for Nicehash, Miningpoolhub, or Zpool directly from the Baikal interface and set it up as an external miner in AM.

Thank you for the reply.

I do not have one yet, But I should have a bunch coming in a week so i'm trying to get ready.

[ukjack]

I have a couple of D3s. I created some temperature protection rules however "disable ASIC" does nothing and "stop miner" just restarts the miner. Any way to actually pause mining on the Antminers?

[Allo-4ka]

Hello Patric
I just update Awesome miner to 4.1.2 and started to have running issues. I`m attaching a bug report program generates after each failure.
Thank you

http://imageban.ru/show/2017/11/13/75e2b09f983b737f40f087175592540c/png

http://rgho.st/6rhvWfwKp