Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[phobosq]

If you're using nVidia cards, then:

Samsung
Micron
Hynix (better return it)

I totaly agree with nvidia ..... stats sometimes even Micron is beter then samsung all 1080ti.s that i have are Micron

Isn't GDDR5X only produced by Micron?

[restless]

my asus strix r7 370 4gb gpu is very slow hashing. is there any solution? i tried some gpu bios mods but the gpus are always lower hash rate. thank you

Mine Expanse or other "low-age" dagger coins
Zec is good also (should get ~ 180h/s)

[BLNT]

nobody said there were even any hashrate improvements in the new version.

Under "Features", it has the same points from v9.7 (increased hashrate of 3-5%) which caused me pause as well. Apparently that claim only applies to 9.6>9.7 ?

Since the same original post seems to be used with each update (I see pros and cons with that), it can lead to some confusion.

[greatauror28]

Hi guys
currently I'm running version 9.7 with my 3 ASUS 580 Dual OC 8GB but the third card is giving me low rates (ETH + SIA). Any advice?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal wallet -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal Wallet -dcoin sia -dcri 25



ETH - Total Speed: 66.442 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 26.249 Mh/s, GPU1 25.969 Mh/s, GPU2 14.223 Mh/s
 SC - Total Speed: 1661.045 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 656.226 Mh/s, GPU1 649.234 Mh/s, GPU2 355.585 Mh/s
GPU0 t=0C fan=0%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%
ETH: 08/03/17-16:34:30 - New job from us1.ethermine.org:4444
ETH - Total Speed: 63.288 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 25.077 Mh/s, GPU1 23.998 Mh/s, GPU2 14.213 Mh/s
 SC - Total Speed: 1582.193 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 626.930 Mh/s, GPU1 599.940 Mh/s, GPU2 355.323 Mh/s

Thanks!!

Please provide gpu-z, PBE screenshots...
How do you manage voltage and frequencies?

We have the same exact cards so I would agree that you should check if Crossfire has accidentally been enabled -  as this is usually the case if you're upgrading drivers as AMD like to enable them by default each and every time.

What's your GPU settings? Did you just copy 1750 > 2000 timings?
Reason is that I'm running 6x right now and with my settings, I get 28.5 tops per card @ current DAG and 540 Mh/s for sia @ 125w GPU-Z tdp.

[WhyMe]

Someone pls put memory in order, from best to worst:
samsung, micron, hynix, elpida

From my xp, there is no really rules.
I've only Samsung and Hynix, and i've good and bad values in both.
My best cards are on Samsung.

[induktor]

If you're using nVidia cards, then:

Samsung
Micron
Hynix (better return it)  <------------LOL!!!!!!

[MrRig]

Thank you claymore for your work. It's a nice dual miner you got going here!

[JeVeuxMonFlousBack!]

Hey,

Dual mining ETC + DCR is worst , almost 4 mh/s less (with spike of  7-11mh/s less) , than 9.7 version. please look it up.

thx

[Bojcha]

yeah..
beta driver works with 9.8

[fuliaro]

Hey,

Dual mining ETC + DCR is worst , almost 4 mh/s less (with spike of  7-11mh/s less) , than 9.7 version. please look it up.

thx

even with higher dcri settings?

[fuliaro]

yeah..
beta driver works with 9.8

are the amd cards hashing better with this beta driver?

[SundanceKid2020]

I have a RX 850, I changed clocks and voltages via -cclock, -mclock, -cvddc  and -mvddc command line options (I set 1300, 1650, 950 and 950, defaults are 1365 and 1750, and I don't know cvddc and mvddc).

 If I run the miner without command line options then the values are 1300 and 1650, not the default's card (I use GPU-Z to see this). If I restart the computer, or flash de GPU bios, nothing changes... This values are inmortals.... How can I change this?. I want the initial state.... If I change again with -cclock 1365 and -mclock 1750 (the initial values) it's Ok, changes, but values are "constants" in GPU-Z window. In the past changes all time during mining job...

Edit: I use Claymore 9.8, and drivers of RX580 are 17.7.2

[Bojcha]

yeah..
beta driver works with 9.8

are the amd cards hashing better with this beta driver?

Yes. Got new beta to test and yes, it works. Cards bumped for 1-1.3MH/s

[S.N.U.F.F.]

yeah..
beta driver works with 9.8

are the amd cards hashing better with this beta driver?

Yes. Got new beta to test and yes, it works. Cards bumped for 1-1.3MH/s

you mean 17.7.2 ?

[Bojcha]

yeah..
beta driver works with 9.8

are the amd cards hashing better with this beta driver?

Yes. Got new beta to test and yes, it works. Cards bumped for 1-1.3MH/s

you mean 17.7.2 ?

no. beta.

[S.N.U.F.F.]

yeah..
beta driver works with 9.8

are the amd cards hashing better with this beta driver?

Yes. Got new beta to test and yes, it works. Cards bumped for 1-1.3MH/s

you mean 17.7.2 ?

no. beta.

link please. Latest I see on AMD site is 17.7.2

[wOvAN]

there're rumours vega'll mine at least 70 m/h after a driver update,

[ghostface_ch]

System: Windows 10, 6x 1070, Driver 376.51, Dualmining (-dcri 35) with PASCAL

v9.7

21:08:01:073   1e38   ETH - Total Speed: 183.039 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
21:08:01:073   1e38   ETH: GPU0 30.600 Mh/s, GPU1 30.534 Mh/s, GPU2 30.460 Mh/s, GPU3 30.551 Mh/s, GPU4 30.389 Mh/s, GPU5 30.503 Mh/s
21:08:01:073   1e38    PASC - Total Speed: 2135.448 Mh/s, Total Shares: 4, Rejected: 0
21:08:01:089   1e38    PASC: GPU0 357.005 Mh/s, GPU1 356.232 Mh/s, GPU2 355.368 Mh/s, GPU3 356.432 Mh/s, GPU4 354.540 Mh/s, GPU5 355.871 Mh/s

v9.8

21:16:42:880   59c   ETH - Total Speed: 178.608 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
21:16:42:881   59c   ETH: GPU0 30.526 Mh/s, GPU1 30.093 Mh/s, GPU2 30.361 Mh/s, GPU3 30.630 Mh/s, GPU4 26.358 Mh/s, GPU5 30.639 Mh/s
21:16:42:882   59c    PASC - Total Speed: 2083.751 Mh/s, Total Shares: 5, Rejected: 0
21:16:42:883   59c    PASC: GPU0 356.137 Mh/s, GPU1 351.085 Mh/s, GPU2 354.215 Mh/s, GPU3 357.353 Mh/s, GPU4 307.504 Mh/s, GPU5 357.457 Mh/s

Which driver Version du you use for NVIDIA Cards with 9.8?

[Korsakopf]

yeah..
beta driver works with 9.8

are the amd cards hashing better with this beta driver?

Yes. Got new beta to test and yes, it works. Cards bumped for 1-1.3MH/s

you mean 17.7.2 ?

no. beta.

I can't find a newer version than 17.7.2, could you link it? Or are you an insider? 

[woodaxe]

there're rumours vega'll mine at least 70 m/h after a driver update,

 yeah started by Gibbo at overclockers UK   
hes the chief buyer there so could be total B/S to drum up trade