Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[antantti]

Copypasted my amd launchconfig, changed worker name, started miner and it just works!

Dagger only gives same hashrate as genoil, currently running 19.2MH dagger/ 530MH just to test against 290x. So tdp limited again...

This on w7 x64, 4x970.

[Nikolaj]

On win 8.1 64 with the 368.81 drivers, a gtx 1070 and a regular batch (it needs to work, I've got experience with it) it hangs.

You cannot mine ETH on 368.81 drivers, thanks to buggy nvidia drivers. So, firstly install 369.05 or later and then start miner.

+1 thanks

this means that whoever has 8.1 64 will need to wait a new driver release from nvidia, or skip directly eth (which isn-t interesting anyway for the 1070/80 owners).

Many thanks claymore

ps: I remember the good old days of mining XMR with your miner in early 2014.. hehe... I needed to sleep with this config near me. Thanks to your version I made almost 440$ in a couple of weeks with this beauty



more details
http://www.xtremehardware.com/forum/showthread.php?t=43454

2016 version
http://www.xtremehardware.com/forum/showthread.php?t=48658&page=6

Roundup GTX 1070 and GTX 1080, BITCOIN mining
http://www.xtremehardware.com/recensioni/schede-video/roundup-gtx-1070-e-gtx-1080-analisi-e-confronto-dei-piu-recenti-modelli-custom-nvidia-pascal-parte-1-2016080211648/

[Claymore]

Code:

**** with Claymore's Dual Miner 

2016-08-15 10:25:09  TRACE rpc  Request: {"method": "eth_getWork", "params": [], "id":0}
2016-08-15 10:25:09  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"error\":{\"code\":-32600,\"message\":\"Invalid request\",\"data\":null},\"id\":null}")

2016-08-15 10:25:10  TRACE rpc  Request: {"method": "eth_getWork", "params": [], "id":0}
2016-08-15 10:25:10  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"error\":{\"code\":-32600,\"message\":\"Invalid request\",\"data\":null},\"id\":null}")

**** with Ethminer

2016-08-15 10:25:30  TRACE rpc  Request: {"id":1,"jsonrpc":"2.0","method":"eth_getWork"}
2016-08-15 10:25:30  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"result\":[\"0xcc906703772e5e65d85abb672dc363bc91f866d7b01b61c0877c40d2edc92b49\",\"0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903\",\"0x00000000001c72ad64007a6db5d3515a0db95a130c9293553de655fde6328914\",\"0x1fa7e4\"],\"id\":1}")

2016-08-15 10:25:32  TRACE rpc  Request: {"id":1,"jsonrpc":"2.0","method":"eth_getWork"}
2016-08-15 10:25:32  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"result\":[\"0xcc906703772e5e65d85abb672dc363bc91f866d7b01b61c0877c40d2edc92b49\",\"0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903\",\"0x00000000001c72ad64007a6db5d3515a0db95a130c9293553de655fde6328914\",\"0x1fa7e4\"],\"id\":1}")
2016-08-15 10:25:33  TRACE rpc  Request: {"id":1,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x62f2","0x0d2d291fe73cba1bfc69c5605a3d3e0af93a2f8c7d210d53cb4c1c263cd3d525"]}

Technically, RPC command in Claymore's Dual Miner is not an issue.
Actually, I have tested with RPC command windows in the parity UI, this command is working well.
but, with Miner, it shows as the error.

I feel as some kind of line termination code error ? or something, strange error has been happening,

Headers are not displayed here.. The Content-Type needs to be set, as already mentioned before

Thank you for your comment,
I have missed your post which has made before,
Thank you.

Ok, I changed requests a bit, please test this build:
https://mega.nz/#!6kJ0lLrD!OVklt9Rxq4ernAMi39CrzPEck_OmngItQVdzKb-067k

[lokojones]

this is api from dwarfpool

RIG: 4GPUS
3 x R9 280 with Claymore 5.3 catalyst 15.2 is mining ETH only

RIG: RIG3GPUS

3x R9 280 with ETHminer + proxy catalyst 15.2

Can anyone tell me what is the point of using CLAYMORE?!

[joaocha]

this is api from dwarfpool

RIG: 4GPUS
3 x R9 280 with Claymore 5.3 catalyst 15.2 is mining ETH only

RIG: RIG3GPUS

3x R9 280 with ETHminer + proxy catalyst 15.2

Can anyone tell me what is the point of using CLAYMORE?!

The point is that you can mine 2 coins together

[lokojones]

On win 8.1 64 with the 368.81 drivers, a gtx 1070 and a regular batch (it needs to work, I've got experience with it) it hangs.

You cannot mine ETH on 368.81 drivers, thanks to buggy nvidia drivers. So, firstly install 369.05 or later and then start miner.

+1 thanks

this means that whoever has 8.1 64 will need to wait a new driver release from nvidia, or skip directly eth (which isn-t interesting anyway for the 1070/80 owners).

Many thanks claymore

ps: I remember the good old days of mining XMR with your miner in early 2014.. hehe... I needed to sleep with this config near me. Thanks to your version I made almost 440$ in a couple of weeks with this beauty



more details
http://www.xtremehardware.com/forum/showthread.php?t=43454

2016 version
http://www.xtremehardware.com/forum/showthread.php?t=48658&page=6

Roundup GTX 1070 and GTX 1080, BITCOIN mining
http://www.xtremehardware.com/recensioni/schede-video/roundup-gtx-1070-e-gtx-1080-analisi-e-confronto-dei-piu-recenti-modelli-custom-nvidia-pascal-parte-1-2016080211648/

this thing will explode after 2hours of use:)
the cards are too close.....

[lokojones]

this is api from dwarfpool

RIG: 4GPUS
3 x R9 280 with Claymore 5.3 catalyst 15.2 is mining ETH only

RIG: RIG3GPUS

3x R9 280 with ETHminer + proxy catalyst 15.2

Can anyone tell me what is the point of using CLAYMORE?!

The point is that you can mine 2 coins together

yes but when you mine 2 coins together the hashrate drops big time...

[Nikolaj]

absolutely not, it was studied this way to work flawlessly, thanks to a silverstone treatment above them:

http://www.xtremeshack.com/image/217913.html

[n0x1ous]

https://i.imgur.com/wkwhPS5.png

this is api from dwarfpool

RIG: 4GPUS
3 x R9 280 with Claymore 5.3 catalyst 15.2 is mining ETH only

RIG: RIG3GPUS

3x R9 280 with ETHminer + proxy catalyst 15.2

Can anyone tell me what is the point of using CLAYMORE?!

The point is that you can mine 2 coins together

yes but when you mine 2 coins together the hashrate drops big time...

Did you set all the recommended paramaters in the OP guide?  I use Claymore because I get better hashrate than ethminer+stratum + built in card reporting and control.  I only mine eth

[lokojones]

can you tell me about what parameters you are talking about?

REgards

[lokojones]

this is api from dwarfpool

RIG: 4GPUS
3 x R9 280 with Claymore 5.3 catalyst 15.2 is mining ETH only

RIG: RIG3GPUS

3x R9 280 with ETHminer + proxy catalyst 15.2

Can anyone tell me what is the point of using CLAYMORE?!

The point is that you can mine 2 coins together

yes but when you mine 2 coins together the hashrate drops big time...

Did you set all the recommended paramaters in the OP guide?  I use Claymore because I get better hashrate than ethminer+stratum + built in card reporting and control.  I only mine eth

can you tell me about what parameters you are talking about?

REgards

[n0x1ous]

https://i.imgur.com/wkwhPS5.png

this is api from dwarfpool

RIG: 4GPUS
3 x R9 280 with Claymore 5.3 catalyst 15.2 is mining ETH only

RIG: RIG3GPUS

3x R9 280 with ETHminer + proxy catalyst 15.2

Can anyone tell me what is the point of using CLAYMORE?!

The point is that you can mine 2 coins together

yes but when you mine 2 coins together the hashrate drops big time...

Did you set all the recommended paramaters in the OP guide?  I use Claymore because I get better hashrate than ethminer+stratum + built in card reporting and control.  I only mine eth

can you tell me about what parameters you are talking about?

REgards

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB:
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

[Flenger]

GTX 1060 not working 
20:56:56:695   1f5c   GPU 2, GpuMiner cu_k01 failed 30, unknown error
20:56:58:685   1d3c   GPU 3, GpuMiner cu_k01 failed 30, unknown error
restarting and crash

[n0x1ous]

2 980ti's on Win10 with 368.81.  Works but getting like 3mh/s out of each card.  I saw the recommened driver was 369.05 but that only supports Pascal correct?

EDIT: Confirmed that 369.05 will not install on Maxwell

[joaocha]

2 980ti's on Win10 with 368.81.  Works but getting like 3mh/s out of each card.  I saw the recommened driver was 369.05 but that only supports Pascal correct?

EDIT: Confirmed that 369.05 will not install on Maxwell

Install windows 7 , and stop this suffering.
you will lost more time tryng to make this work on 10,

[n0x1ous]

2 980ti's on Win10 with 368.81.  Works but getting like 3mh/s out of each card.  I saw the recommened driver was 369.05 but that only supports Pascal correct?

EDIT: Confirmed that 369.05 will not install on Maxwell

Install windows 7 , and stop this suffering.
you will lost more time tryng to make this work on 10,

Its primarily my gaming rig as I have dedicated AMD miner systems so wont be going back to 7 on this one.  But will mine some extra coin on the side if I can get it working decently.

[calculatorduck]

Getting "cannot allocate big buffer for DAG" on my card.

I have used

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

Page file set to 16gb.

Any other ideas?

[fittsy]

Why 6 blue USB cables and only 5 GPUS? The cables should be going from PCIe risers to the GPUs.

Were you not able to fit 6?

[PovertyByte]

I am looking through the readme.

Would setting -ethi  to lower intensity be a viable way to save resources so I could game and mine at the same time?

And the readme makes it look like Decred and Siacoin share the same pool, and same wallet? What wallet do I make?

[elzium]

Getting "cannot allocate big buffer for DAG" on my card.

I have used

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

Page file set to 16gb.

Any other ideas?

15.12