qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
 |
July 15, 2016, 06:32:22 AM |
|
FEATURES:
- Supports new "dual mining" mode: mining both Ethereum and Decred or Siacoin at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well. - Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code. - No DAG files. - Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy. - Supports Ethereum solo mining. - Supports both Http and Stratum for Decred. - Supports failover. - Displays detailed mining information and hashrate for every card. - Supports remote monitoring and management. - Supports GPU selection, built-in GPU overclocking features and temperature management. - Supports Ethereum forks (Expanse, etc). - Windows and Linux versions. I don't see any solo for second coins. Tell me where i'm wrong?
|
|
|
|
BenSF
Newbie
Offline
Activity: 19
Merit: 0
|
 |
July 15, 2016, 06:47:14 AM |
|
FEATURES:
- Supports new "dual mining" mode: mining both Ethereum and Decred or Siacoin at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well. - Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code. - No DAG files. - Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy. - Supports Ethereum solo mining. - Supports both Http and Stratum for Decred. - Supports failover. - Displays detailed mining information and hashrate for every card. - Supports remote monitoring and management. - Supports GPU selection, built-in GPU overclocking features and temperature management. - Supports Ethereum forks (Expanse, etc). - Windows and Linux versions. I don't see any solo for second coins. Tell me where i'm wrong? Correct no official solo for second coins
|
|
|
|
Zulucia
Newbie
Offline
Activity: 73
Merit: 0
|
 |
July 15, 2016, 07:24:57 AM |
|
Im buyng some Gpus for my new rig.
Did r290x have much more power than r9 290?
Or same thing for mining?
I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each. Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice Undervolt and you will save a ton of electricity, also you could overclock the core gpu and get more MH, they will hash up to 29 mh with a overclock. 290X is just a "factory" overclocked 290. That is right. Undervolt will make the miner more efficient in terms of Watt/MH/s. I tried this on many GPUs.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
 |
July 15, 2016, 07:47:36 AM |
|
If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it. Search this forum for those bioses. 
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
 |
July 15, 2016, 07:58:27 AM |
|
If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it. Search this forum for those bioses.  is that applicable to the reference sapphire 290 as well?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
 |
July 15, 2016, 08:07:57 AM |
|
What about ETH solo/Siacoin solo ?
You should test it by your own. I haven't sufficient powers unfortunately. Are you serious ? How i can test Siacoin solo if it even not implemented. Waiting for block will never be found or accepted. Re-read my msg. Right now Siacoin solo is not supported as i see in ver. description. Sia solo is supported. Check readme "SAMPLE USAGE" section: ... ethpool, ethermine (and Siacoin solo): ... I solved three blocks when I tested v5.0. However, right now Siacoin diff is too high to test solo easily.
|
|
|
|
spyshagg
|
 |
July 15, 2016, 08:18:59 AM |
|
Im buyng some Gpus for my new rig.
Did r290x have much more power than r9 290?
Or same thing for mining?
I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each. Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice Undervolt and you will save a ton of electricity, also you could overclock the core gpu and get more MH, they will hash up to 29 mh with a overclock. 290X is just a "factory" overclocked 290. Although while mining Ether they perform about 1% within each other at the same mhz, that is only because Eth doesn't push them. The 290X has 4 more Compute units than 290 (44 vs 40. 2813 shaders vs 2560), which will provide ~10% more performance in games and other compute intensive applications. cheers
|
|
|
|
Yadamosan
Member

Offline
Activity: 193
Merit: 10
|
 |
July 15, 2016, 08:20:55 AM |
|
Im buyng some Gpus for my new rig.
Did r290x have much more power than r9 290?
Or same thing for mining?
I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each. Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice Undervolt and you will save a ton of electricity, also you could overclock the core gpu and get more MH, they will hash up to 29 mh with a overclock. 290X is just a "factory" overclocked 290. Although while mining Ether they perform about 1% within each other at the same mhz, that is only because Eth doesn't push them. The 290X has 4 more Compute units than 290 (44 vs 40. 2813 shaders vs 2560), which will provide ~10% more performance in games and other compute intensive applications. cheers When you do dual mining with 290 and 290x, will you get more Decred or Siacoin with 290x than 290?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
 |
July 15, 2016, 09:31:30 AM |
|
If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it. Search this forum for those bioses.  is that applicable to the reference sapphire 290 as well? Yes All Reference GPUs are made by AMD. They aren't made by Sapphire, ASUS, Powercolor, etc.
|
|
|
|
DrX
Member

Offline
Activity: 233
Merit: 20
|
 |
July 15, 2016, 10:16:11 AM |
|
Please implement stratum connection for Siacoin. As you already know, there's no stratum protocol for Siacoin yet. Fortunately, Siacoin's mining protocol is quite similar as Ethereum, many things can be adapted. "Nicehash compatible stratum" or "stratum-mining-proxy from coinotron" style would be good. (I prefer Nicehash version because it locks down minernonce for each miners and it would be compatible for rental service later. coinotron style stratum is also good.) As current work polling mining method harms pool server and client performance much, it would be much better when stratum protocol is implemented. MiningPoolHub will implement pool side when stratum enabled miner is released. Thanks.
I can add "stratum-mining-proxy" stratum support for Siacoin. Do you need a private version for tests, right? PM me for details. Stratum-mining-proxy coming soon for Siacoin?
|
|
|
|
allcoinminer
|
 |
July 15, 2016, 12:55:09 PM |
|
If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it. Search this forum for those bioses.  is that applicable to the reference sapphire 290 as well? Yes All Reference GPUs are made by AMD. They aren't made by Sapphire, ASUS, Powercolor, etc. This a very powerful robust and good quality GPU. I miss it.
|
|
|
|
etoque
Legendary
Offline
Activity: 1988
Merit: 1000
|
 |
July 15, 2016, 01:03:17 PM |
|
hey I got problem since 4.6 version with my 270x mining EXP,I have update to last and problem are still here. After dev fee dag stall and it stay at 0 MH  thanks
|
|
|
|
frostminer
|
 |
July 15, 2016, 01:04:31 PM |
|
If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it. Search this forum for those bioses.  is that applicable to the reference sapphire 290 as well? Yes All Reference GPUs are made by AMD. They aren't made by Sapphire, ASUS, Powercolor, etc. This a very powerful robust and good quality GPU. I miss it. You dont like the 380 or 390?
|
|
|
|
senne
|
 |
July 15, 2016, 01:15:39 PM |
|
@claymore:
i'm overclocking my gpu's a bit by using -cclock option, hashrate is fine, but after 2 mins or so hashrate of card0 drops back to normal rate. (in linux), any clues??
@claymore bump, i think u missed this one..
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
 |
July 15, 2016, 02:09:41 PM |
|
@claymore:
i'm overclocking my gpu's a bit by using -cclock option, hashrate is fine, but after 2 mins or so hashrate of card0 drops back to normal rate. (in linux), any clues??
@claymore bump, i think u missed this one.. This is called throttling
|
|
|
|
alevlaslo
|
 |
July 15, 2016, 02:40:02 PM Last edit: July 15, 2016, 02:50:10 PM by alevlaslo |
|
Hey!
Good Job!
Fury X is 30 eth + 1200 sia
sia more profit than eth today too
system with 4 cards get 1600 watts
t 65 and 50% fans
but gpu3 do not temperature and fan look on miner...
|
Sale the first NFT of the first foto
|
|
|
WhyMe
|
 |
July 15, 2016, 02:42:24 PM |
|
Im buyng some Gpus for my new rig.
Did r290x have much more power than r9 290?
Or same thing for mining?
I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each. Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice Same cards here, 26.7MHs @stock with original bios, 27MHs after flashing with optimized bios, but always @stock. So your 25 is low. 560w for 2 cards ( after undervolt )
|
|
|
|
BenSF
Newbie
Offline
Activity: 19
Merit: 0
|
 |
July 15, 2016, 03:22:13 PM |
|
Claymore
Any chance you could build in a benchmark flag? I would be looking for a DCRI range as an input and the ability to log the results of each DCRI
|
|
|
|
madmartyk
Legendary
Offline
Activity: 2730
Merit: 1030
Yes I am a pirate, 300 years too late!
|
 |
July 15, 2016, 03:22:51 PM |
|
I had something very strange happen yesterday. I was checking my miner and there was someone Teamviewer'ed into it. from there they went to every machine I have. I put a stop to it, reinstalled TV with a new address and 2 factor. The only thing I have done to that machine is installed and was running Claymore 5.0.
VirusTotal gives 5.0/5.1 three hits. I have been using claymore since the beginning but this is really strange. Have have forefront and malware bytes running on all machines and they are clean.
I know miners/wallets sometimes have false positives. But this really un-nerved me...
|
|
|
|
spyshagg
|
 |
July 15, 2016, 03:58:38 PM |
|
anyone mining siamining.com ?
Been mining for a few time now, haven't received any payout yet. Unpaid balance = 222.33sc
Faq's only mentions they "credit" you per share, but when does that value hits the wallet?
cheers
|
|
|
|
|