Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[pwpwpw]

claymore, can you tell me how the ethman actually gets the data ? I see weird hashrate drops for one of my rigs and when I'm actually at the rig, checking the hashrate every 2-3seconds with "s" there is no hashrate drop, only in ethman, which one shows the wrong hashrate?

[etoque]

EXP and siacoin both don't work ? can't get the miner worth for them  in dual mining

[rollingdice]

My cards slows down after mining for about 10 minutes. I'm sure it's not related to thermal throttling because temperature was fine. Any idea how this happens? Is this pool-related problem?

https://s4.postimg.io/ruw65mmsd/eth_slowdown.png

2x RX480, memory bumped to 2250.
AMD Phenom II x4 925, Biostar TA890GXE, 8GB RAM.

[mikewetminer88]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.

I have mutiple versions of 470 cards , MSI, XFX, and a few Saphire OC cards all 4GB and they all work flawlessley with Calymore not the latest version the last one.

version of miner or display driver.. IM on 16.8.2 hotfix and v6cdm.. Couldnt get last version to work either.  Could you give some more info on your command line setup.. Are you serializing? or using a different intensity by chance.  TIA

Could be that its due to being a mix in my system of old and new.. I got a new msi mobo today with 7 pcie so i will start that build off with the rx470 by itself to eliminate any issue my home pc may have  Thanks for letting me know that at least someone is having a good exp with the miner and the new amd cards. gives me hope. Now i just have to figure out why genoil works and this one dont.  I let genoil run for 4 days and it never glitched.  hmmmm

Best Regards
d57heinz

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal xxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -allpools 1 -allcoins 1 -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -dcoin sia -dcri 40 -tt 75

that's what I'm using for my 470s

the 8GB card arrived today and it gets 23mhs stock vs the 20 mhs stock on the 4 gig cards

I also installed the hotfix 16.8.2 over 7.3 and it fixed the issue with upping mem freq over 1700 , all 470s can get to 2050 mem now

Right now I upped the mem to 1750 for all cards and the 8 gig card gets to 24 mhs eth and 467 sia , all the 4 GB cards arfe 21.2 and 427 sia.

I think I could get these cards way higer with a custom bios though all in all they are decent cards with no 480s in stock

RX470 8GB mem set to 1750Mhz you can get 24Mh/s eth? I dont think it that much. I had 2X RX470 8Gb Nitro, can never achieve 22 with 1750Mhz mem

[prichina]

My cards slows down after mining for about 10 minutes. I'm sure it's not related to thermal throttling because temperature was fine. Any idea how this happens? Is this pool-related problem?
https://s4.postimg.io/ruw65mmsd/eth_slowdown.png
https://s4.postimg.io/ruw65mmsd/eth_slowdown.png

2x RX480, memory bumped to 2250.
AMD Phenom II x4 925, Biostar TA890GXE, 8GB RAM.

Check your pci e cables be sure they are ok...when i have problems like this, it is always with the pci e cables...Power problem in general.

[pwpwpw]

My cards slows down after mining for about 10 minutes. I'm sure it's not related to thermal throttling because temperature was fine. Any idea how this happens? Is this pool-related problem?

https://s4.postimg.io/ruw65mmsd/eth_slowdown.png

2x RX480, memory bumped to 2250.
AMD Phenom II x4 925, Biostar TA890GXE, 8GB RAM.

Check your pci e cables be sure they are ok...when i have problems like this, it is always with the pci e cables...Power problem in general.

I do have the same thing with 4x r9 280x, they all go down to 0.5mh for about a minute or 2, then they go back to 17mh~. I saw this like twice a day, might happen a bit more.

[qqqq]

Back to genoil, cause 6.1 not work for me and 6.0 is waste my electricity.

You mine ETH solo? Not with Parity? Because I got reports about problems with Parity, I changed requests a bit in v6.1, it could cause problems with older version. Changed it to original version, please try this:
https://mega.nz/#!r8IWGIZS!zHiYJ0N2Ywes6ReWoe-VWjMmDCiIfmUGrDInB2nDtJE
Linked with cuda 7.5, just copy .exe it to main miner folder.

No, with geth 1.4.9 for ETC and 1.4.10 for ETH.

 6.1beta2 shows this

Code:

ETH: Received error: {"jsonrpc":"2.0","error":{"code":-32700,"message":"json: ca
nnot unmarshal string into Go value of type rpc.JSONRequest"}}

[Marvell1]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.

I have mutiple versions of 470 cards , MSI, XFX, and a few Saphire OC cards all 4GB and they all work flawlessley with Calymore not the latest version the last one.

version of miner or display driver.. IM on 16.8.2 hotfix and v6cdm.. Couldnt get last version to work either.  Could you give some more info on your command line setup.. Are you serializing? or using a different intensity by chance.  TIA

Could be that its due to being a mix in my system of old and new.. I got a new msi mobo today with 7 pcie so i will start that build off with the rx470 by itself to eliminate any issue my home pc may have  Thanks for letting me know that at least someone is having a good exp with the miner and the new amd cards. gives me hope. Now i just have to figure out why genoil works and this one dont.  I let genoil run for 4 days and it never glitched.  hmmmm

Best Regards
d57heinz

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal xxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -allpools 1 -allcoins 1 -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -dcoin sia -dcri 40 -tt 75

that's what I'm using for my 470s

the 8GB card arrived today and it gets 23mhs stock vs the 20 mhs stock on the 4 gig cards

I also installed the hotfix 16.8.2 over 7.3 and it fixed the issue with upping mem freq over 1700 , all 470s can get to 2050 mem now

Right now I upped the mem to 1750 for all cards and the 8 gig card gets to 24 mhs eth and 467 sia , all the 4 GB cards arfe 21.2 and 427 sia.

I think I could get these cards way higer with a custom bios though all in all they are decent cards with no 480s in stock

RX470 8GB mem set to 1750Mhz you can get 24Mh/s eth? I dont think it that much. I had 2X RX470 8Gb Nitro, can never achieve 22 with 1750Mhz mem

all the cards seem different these are MSI OC 8GB cards , the mem might be closer to 1800 but not higher than that otherwise I get BSOD and its actually 23.5 dual mining

[Marvell1]

MSI GTX 1070 getting 27MH/s with DaggerHashimoto and    0.38 GH/s with Decreed  dual mining

is this good?

whats the power usage, it seems 480s are a lot more power efficient dual mining than 1070s which is  shame becase you can barely find any 480s for sale

[ivanpop]

v6 haves some pretty nice features. Controlling fans, overclocking, target temperatures and mining intensity, I just love it. Keep up the good work.

I would like to see some improvements on the remote manager as well, like changing -dcri and some sort of security, so that others can't get access.

[kitz777]

I have a small problem/question.

I just started mining for the first time, and on Ubuntu. When I run the miner, it says "ADL not found!" but keeps mining normally. What does that error msg mean and how do I fix it?

[Volodka_007]

Code:

**** with Claymore's Dual Miner 

2016-08-15 10:25:09  TRACE rpc  Request: {"method": "eth_getWork", "params": [], "id":0}
2016-08-15 10:25:09  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"error\":{\"code\":-32600,\"message\":\"Invalid request\",\"data\":null},\"id\":null}")

2016-08-15 10:25:10  TRACE rpc  Request: {"method": "eth_getWork", "params": [], "id":0}
2016-08-15 10:25:10  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"error\":{\"code\":-32600,\"message\":\"Invalid request\",\"data\":null},\"id\":null}")

**** with Ethminer

2016-08-15 10:25:30  TRACE rpc  Request: {"id":1,"jsonrpc":"2.0","method":"eth_getWork"}
2016-08-15 10:25:30  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"result\":[\"0xcc906703772e5e65d85abb672dc363bc91f866d7b01b61c0877c40d2edc92b49\",\"0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903\",\"0x00000000001c72ad64007a6db5d3515a0db95a130c9293553de655fde6328914\",\"0x1fa7e4\"],\"id\":1}")

2016-08-15 10:25:32  TRACE rpc  Request: {"id":1,"jsonrpc":"2.0","method":"eth_getWork"}
2016-08-15 10:25:32  DEBUG rpc  Response: Some("{\"jsonrpc\":\"2.0\",\"result\":[\"0xcc906703772e5e65d85abb672dc363bc91f866d7b01b61c0877c40d2edc92b49\",\"0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903\",\"0x00000000001c72ad64007a6db5d3515a0db95a130c9293553de655fde6328914\",\"0x1fa7e4\"],\"id\":1}")
2016-08-15 10:25:33  TRACE rpc  Request: {"id":1,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x62f2","0x0d2d291fe73cba1bfc69c5605a3d3e0af93a2f8c7d210d53cb4c1c263cd3d525"]}

Technically, RPC command in Claymore's Dual Miner is not an issue.
Actually, I have tested with RPC command windows in the parity UI, this command is working well.
but, with Miner, it shows as the error.

I feel as some kind of line termination code error ? or something, strange error has been happening,

Headers are not displayed here.. The Content-Type needs to be set, as already mentioned before

Thank you for your comment,
I have missed your post which has made before,
Thank you.

Ok, I changed requests a bit, please test this build:
https://mega.nz/#!6kJ0lLrD!OVklt9Rxq4ernAMi39CrzPEck_OmngItQVdzKb-067k

Hi, I tried the version 6.1b2, it does not work with PARITY you can connect to my solo node and try its synced and work whis genoil,or if you want I can give full access to the my VPS ....


ip node http://185.86.79.245:8545

[kitz777]

Hello, I need an answer! Is AMD Catalyst required to mine with Ubuntu? I just downloaded the latest AMD drivers and it's mining well... Do I also need the catalyst?

[Volodka_007]

Hello, I need an answer! Is AMD Catalyst required to mine with Ubuntu? I just downloaded the latest AMD drivers and it's mining well... Do I also need the catalyst?

NO its not nesesary

[ivanpop]

Has anyone tried changing clocks and power limit in Ubuntu? Can you lower the power consumption in Ubuntu, using -powlim or it doesn't work? So far I haven't seen a software that can change graphics card's power consumption in Linux.

[Claymore]

Hi, I tried the version 6.1b2, it does not work with PARITY

6.1beta2 shows this

This must work, let me know if it works for you:
https://mega.nz/#!vgpgkKCS!Zj_MMGh4axSBCIpNzJ9wbb1a75mZ-Tu7GZdXEHZzIsI

[Joren22]

I cant do dual mining with siacoin.
Here is my Config:

-epool us1.ethermine.org:4444
-ewal 0x7f644a86ebf47309616ae93401aa05640aebdc7a
-epsw x
-dpool stratum+tcp://siamining.com:7777
-dwal 30d7afa7d36bf9345be342d9a93dd60375caaaf40eedf45ab4ef7988c4b1f77ae06568bb394d
-dpsw x
-esm 1
-mode 0
-tt 70
-eworker JoRen07
-dcri 30
-ethi 4
-dcoin sia

Anything i missed why i couldnt dual mine?
Thanks in advance!

[Volodka_007]

Hi, I tried the version 6.1b2, it does not work with PARITY

6.1beta2 shows this

This must work, let me know if it works for you:
https://mega.nz/#!vgpgkKCS!Zj_MMGh4axSBCIpNzJ9wbb1a75mZ-Tu7GZdXEHZzIsI

Thanks It works !!!!

But now I have a fan speed control problem

[Claymore]

Thanks It works !!!!
But now I have a fan speed control problem

It's a good idea to tell me more details if you want some help. And PM me the log file.

[qqqq]

It works for me also. Exactly speed like genoil 21 mhs with 1080 MSI (Win 7x64, 372.54). CPU load is ok.

3 GTX 970 works fine too with exactly CPU load like genoil and maybe a bit less. Thank you.