Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[n0x1ous]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

AFAIK maxwell just doesnt do ethereum nicely. the new pascal can however

Apparently they do ok with Genoil on Windows 7

[clipto]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

[Claymore]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

[fittsy]

Notice: Still 20% BONUS (=MORE) per BLOCK on Sia !

How is this possible? Are you donating your personal coins?

[ocminer]

Notice: Still 20% BONUS (=MORE) per BLOCK on Sia !

How is this possible? Are you donating your personal coins?

Yep, I bought quite a lot when it was cheap and i'm giving them away now. It's still quite some left.

[d57heinz]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

[Claymore]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.

[Strannik-74]

Celeron G1620, PRO BTC, 6xGTX1070, Win 8.1, Driver 372.54  WHQL.

EthDcrMiner load CPU 60-80%, because this is not a stable hash, is this normal?
+ when stopping miner, sometimes, driver stops responding.

[VirosaGITS]

https://i.imgur.com/DugONro.png

Thoughts? W10 with 6 480s

[d57heinz]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.

I absolutely am not mining any other coin.  http://ethermine.org/miners/678808033b4fa7ff76c8e75cb366a21d2820c3d2#workers

and one can easily look at that address on blockchain and see     Its def the miner and ill test if adding driver to the folder makes any diff.

Code:

09:17:30:908	2fa8	args: -epool us1.ethermine.org:4444 -ewal 0x678808033b4fa7ff76c8e75cb366a21d2820c3d2 -eworker Amd8350 -epsw x -gser 2 -di 0123 
09:17:30:910	2fa8	
09:17:30:911	2fa8	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
09:17:30:912	2fa8	º        Claymore's Dual ETH + DCR/SC GPU Miner v6.0 Beta        º
09:17:30:913	2fa8	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
09:17:30:914	2fa8	
09:17:31:115	2fa8	ETH: 1 pool is specified
09:17:31:115	2fa8	Main Ethereum pool is us1.ethermine.org:4444
09:17:31:116	2fa8	DCR: 0 pool is specified
09:17:31:587	2fa8	OpenCL platform: AMD Accelerated Parallel Processing
09:17:31:589	2fa8	OpenCL initializing...

09:17:31:589	2fa8	AMD Cards available: 4 
09:17:31:592	2fa8	GPU #0: Hawaii, 4096 MB available, 40 compute units
09:17:31:592	2fa8	GPU #0 recognized as Radeon 290
09:17:31:592	2fa8	GPU #1: Ellesmere, 4096 MB available, 32 compute units
09:17:31:593	2fa8	GPU #2: Hawaii, 8192 MB available, 44 compute units
09:17:31:594	2fa8	GPU #2 recognized as Radeon 390X
09:17:31:594	2fa8	GPU #3: Hawaii, 8192 MB available, 44 compute units
09:17:31:594	2fa8	GPU #3 recognized as Radeon 390X
09:17:31:596	2fa8	POOL/SOLO version
09:17:31:596	2fa8	b202 
09:17:31:655	2fa8	start building OpenCL program for GPU 0...
09:17:31:895	2fa8	done
09:17:31:996	2fa8	start building OpenCL program for GPU 1...
09:17:35:689	2fa8	done
09:17:35:792	2fa8	start building OpenCL program for GPU 2...
09:17:36:023	2fa8	done
09:17:36:124	2fa8	start building OpenCL program for GPU 3...
09:17:36:359	2fa8	done
09:17:36:460	2fa8	GPU #0: set -etha as 0 (ETH algo for fast cards)
09:17:36:460	2fa8	GPU #1: set -etha as 0 (ETH algo for fast cards)
09:17:36:461	2fa8	GPU #2: set -etha as 0 (ETH algo for fast cards)
09:17:36:462	2fa8	GPU #3: set -etha as 0 (ETH algo for fast cards)
09:17:36:462	2fa8	cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
09:17:36:463	2fa8	No NVIDIA CUDA GPUs detected.
09:17:36:463	2fa8	Total cards: 4 
09:17:36:596	2990	ETH: Stratum - connecting to 'us1.ethermine.org' <45.63.6.113> port 4444
09:17:36:675	2fa8	No pool specified for Decred! Ethereum-only mining mode is enabled

09:17:36:676	2fa8	ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

09:17:36:677	2fa8	ETH: eth-proxy stratum mode
09:17:36:677	2fa8	Watchdog enabled
09:17:36:678	2fa8	Remote management is enabled on port 3333
09:17:36:678	2fa8	

09:17:37:080	2990	send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x678808033b4fa7ff76c8e75cb366a21d2820c3d2", "x"], "id": 2, "method": "eth_submitLogin"}

09:17:37:081	2990	ETH: Stratum - Connected (us1.ethermine.org:4444)
09:17:38:036	2990	got 39 bytes
09:17:38:036	2990	buf: {"id":2,"jsonrpc":"2.0","result":true}

09:17:38:037	2990	parse packet: 38
09:17:38:037	2990	ETH: Authorized
09:17:38:038	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:17:38:038	2990	new buf size: 0
09:17:38:734	2990	got 237 bytes
09:17:38:735	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x06115b977291a3ba2b77bbf8731319f1008f7f117972989716c2429053809554","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:17:38:735	2990	parse packet: 236
09:17:38:735	2990	eth: job changed
09:17:38:736	2990	new buf size: 0
09:17:38:818	2ac4	Setting DAG epoch #69...
09:17:39:056	2990	got 237 bytes
09:17:39:056	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0xba32f3f066d1765bf84f8d301a4e330a6559b62bdb74493f83951b1c17e9c80a","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:17:39:056	2990	parse packet: 236
09:17:39:057	2990	eth: job changed
09:17:39:057	2990	new buf size: 0
09:17:39:058	2990	ETH: 08/15/16-09:17:39 - New job from us1.ethermine.org:4444
09:17:39:058	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
09:17:39:059	2990	ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:17:39:060	2990	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
09:17:39:699	2fa8	OC v6, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst 
09:17:39:702	2fa8	OC v6, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst 
09:17:39:707	2fa8	OC v6, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst 
09:17:39:716	2fa8	OC v7, Reset control for GPU 18, close miner right now if you want to use default control from Catalyst 
09:17:40:333	2ac4	Setting DAG epoch #69 for GPU #1
09:17:40:334	2ac4	Create GPU buffer for GPU #1
09:17:42:738	2fa8	OC v6, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst 
09:17:42:741	2fa8	OC v6, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst 
09:17:42:748	2fa8	OC v6, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst 
09:17:42:756	2fa8	OC v7, Reset control for GPU 18, close miner right now if you want to use default control from Catalyst 
09:17:44:758	2ac4	GPU 1 DAG creation time 4343 ms
09:17:44:759	2ac4	Setting DAG epoch #69 for GPU #1 done
09:17:44:761	9a8	Setting DAG epoch #69 for GPU #3
09:17:44:763	9a8	Create GPU buffer for GPU #3
09:17:48:703	2990	got 237 bytes
09:17:48:703	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0xfbebf1a03b61acce67df5ab00140dd1a5b748a772aa4296e8f425d398f558d30","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:17:48:704	2990	parse packet: 236
09:17:48:704	2990	eth: job changed
09:17:48:705	2990	new buf size: 0
09:17:48:705	2990	ETH: 08/15/16-09:17:48 - New job from us1.ethermine.org:4444
09:17:48:706	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
09:17:48:707	2990	ETH - Total Speed: 22.101 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:17:48:708	2990	ETH: GPU0 0.000 Mh/s, GPU1 22.101 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
09:17:48:741	2990	ETH: checking pool connection...
09:17:48:741	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:17:49:416	2990	got 237 bytes
09:17:49:417	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0xfbebf1a03b61acce67df5ab00140dd1a5b748a772aa4296e8f425d398f558d30","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:17:49:417	2990	parse packet: 236
09:17:49:417	2990	eth: job is the same
09:17:49:418	2990	new buf size: 0
09:17:49:800	9a8	GPU 3 DAG creation time 5008 ms
09:17:49:802	9a8	Setting DAG epoch #69 for GPU #3 done
09:17:49:803	2454	Setting DAG epoch #69 for GPU #0
09:17:49:805	2454	Create GPU buffer for GPU #0
09:17:55:520	2454	GPU 0 DAG creation time 5630 ms
09:17:55:529	2454	Setting DAG epoch #69 for GPU #0 done
09:17:55:531	2928	Setting DAG epoch #69 for GPU #2
09:17:55:533	2928	Create GPU buffer for GPU #2
09:17:58:740	2990	send: {"id":6,"worker":"Amd8350","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x4f2a03c", "0x000000000000000000000000000000000000000000000000000000009661a6fc"]}

09:17:58:757	2990	ETH: checking pool connection...
09:17:58:757	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:17:59:723	2990	got 39 bytes
09:17:59:724	2990	buf: {"id":6,"jsonrpc":"2.0","result":true}

09:17:59:724	2990	parse packet: 38
09:17:59:725	2990	new buf size: 0
09:17:59:776	2990	got 237 bytes
09:17:59:776	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0xfbebf1a03b61acce67df5ab00140dd1a5b748a772aa4296e8f425d398f558d30","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:17:59:777	2990	parse packet: 236
09:17:59:777	2990	eth: job is the same
09:17:59:778	2990	new buf size: 0
09:18:00:605	2928	GPU 2 DAG creation time 4999 ms
09:18:00:606	2928	Setting DAG epoch #69 for GPU #2 done
09:18:04:549	2990	got 237 bytes
09:18:04:552	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x32829d647e98cc0bf333c31c16edb402f0de2023980af5df9806fd2f00837b3f","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:18:04:552	2990	parse packet: 236
09:18:04:553	2990	eth: job changed
09:18:04:553	2990	new buf size: 0
09:18:04:554	2990	ETH: 08/15/16-09:18:04 - New job from us1.ethermine.org:4444
09:18:04:554	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
09:18:04:555	2990	ETH - Total Speed: 114.334 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:18:04:556	2990	ETH: GPU0 29.610 Mh/s, GPU1 22.085 Mh/s, GPU2 31.308 Mh/s, GPU3 31.331 Mh/s
09:18:07:310	2fa8	GPU0 t=55C fan=21%, GPU1 t=58C fan=34%, GPU2 t=59C fan=43%, GPU3 t=52C fan=56%
09:18:07:314	2fa8	em hbt: 0, fm hbt: 31, 
09:18:07:315	2fa8	watchdog - thread 0, hb time 250
09:18:07:315	2fa8	watchdog - thread 1, hb time 62
09:18:07:316	2fa8	watchdog - thread 2, hb time 156
09:18:07:316	2fa8	watchdog - thread 3, hb time 344
09:18:07:316	2fa8	watchdog - thread 4, hb time 328
09:18:07:317	2fa8	watchdog - thread 5, hb time 140
09:18:07:317	2fa8	watchdog - thread 6, hb time 94
09:18:07:318	2fa8	watchdog - thread 7, hb time 281
09:18:08:772	2990	ETH: checking pool connection...
09:18:08:780	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:18:09:444	2990	got 237 bytes
09:18:09:444	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x32829d647e98cc0bf333c31c16edb402f0de2023980af5df9806fd2f00837b3f","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:18:09:444	2990	parse packet: 236
09:18:09:445	2990	eth: job is the same
09:18:09:446	2990	new buf size: 0
09:18:10:575	2990	got 237 bytes
09:18:10:576	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0xcb8b72510d20cdf66d6ee3b2219aa0c4969783b97f08820d3fa22638e35b28ca","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:18:10:577	2990	parse packet: 236
09:18:10:578	2990	eth: job changed
09:18:10:579	2990	new buf size: 0
09:18:10:580	2990	ETH: 08/15/16-09:18:10 - New job from us1.ethermine.org:4444
09:18:10:581	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
09:18:10:583	2990	ETH - Total Speed: 114.281 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:18:10:585	2990	ETH: GPU0 29.591 Mh/s, GPU1 22.103 Mh/s, GPU2 31.289 Mh/s, GPU3 31.298 Mh/s
09:18:15:414	2fb4	
09:18:15:416	2fb4	GPU #0: Hawaii, 4096 MB available, 40 compute units
09:18:15:417	2fb4	GPU #1: Ellesmere, 4096 MB available, 32 compute units
09:18:15:418	2fb4	GPU #2: Hawaii, 8192 MB available, 44 compute units
09:18:15:419	2fb4	GPU #3: Hawaii, 8192 MB available, 44 compute units
09:18:15:420	2fb4	ETH - Total Speed: 114.172 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:18:15:422	2fb4	ETH: GPU0 29.616 Mh/s, GPU1 22.032 Mh/s, GPU2 31.231 Mh/s, GPU3 31.293 Mh/s
09:18:15:423	2fb4	Incorrect ETH shares: none
09:18:15:424	2fb4	Pool switches: ETH - 0, DCR - 0
09:18:15:425	2fb4	Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
09:18:15:474	2fb4	GPU0 t=59C fan=28%, GPU1 t=60C fan=36%, GPU2 t=61C fan=44%, GPU3 t=57C fan=56%
09:18:15:475	2fb4	
09:18:18:756	2990	send: {"id":6,"worker":"Amd8350","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x6cf2a9c", "0x000000000000000000000000000000000000000000000000000000009661a6fc"]}

09:18:18:788	2990	ETH: checking pool connection...
09:18:18:789	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:18:19:215	2990	got 237 bytes
09:18:19:215	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x6a1cf91db9ec6c492808201171c05ed9249665847a6c6f4fc5f16fdfbd7c8fbd","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:18:19:215	2990	parse packet: 236
09:18:19:215	2990	eth: job changed
09:18:19:216	2990	new buf size: 0
09:18:19:216	2990	ETH: 08/15/16-09:18:19 - New job from us1.ethermine.org:4444
09:18:19:217	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
09:18:19:218	2990	ETH - Total Speed: 114.124 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
09:18:19:219	2990	ETH: GPU0 29.462 Mh/s, GPU1 22.087 Mh/s, GPU2 31.282 Mh/s, GPU3 31.292 Mh/s
09:18:19:455	2990	got 39 bytes
09:18:19:456	2990	buf: {"id":6,"jsonrpc":"2.0","result":true}

09:18:19:456	2990	parse packet: 38
09:18:19:456	2990	new buf size: 0
09:18:19:534	2990	got 237 bytes
09:18:19:535	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x6a1cf91db9ec6c492808201171c05ed9249665847a6c6f4fc5f16fdfbd7c8fbd","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:18:19:535	2990	parse packet: 236
09:18:19:535	2990	eth: job is the same
09:18:19:536	2990	new buf size: 0
09:18:21:384	9a8	ETH: put share nonce df24758401d959bb
09:18:21:384	9a8	ETH round found 1 shares
09:18:21:385	2990	ETH: 08/15/16-09:18:21 - SHARE FOUND - (GPU 3)
09:18:21:393	2990	send: {"worker":"Amd8350","id":4,"method":"eth_submitWork","params":["0xdf24758401d959bb","0x6a1cf91db9ec6c492808201171c05ed9249665847a6c6f4fc5f16fdfbd7c8fbd","0x3d132f4eac2ee0d0b01d14f243683785f3d22b5e5b6288099dbfdadd008111bd"]}

09:18:22:084	2990	got 39 bytes
09:18:22:084	2990	buf: {"id":4,"jsonrpc":"2.0","result":true}

09:18:22:084	2990	parse packet: 38
09:18:22:085	2990	ETH: Share accepted (703 ms)!

09:18:22:086	2990	new buf size: 0
09:18:22:595	1ba4	ETH: put share nonce c5e5a29801f6c841
09:18:22:596	1ba4	ETH round found 1 shares
09:18:22:597	2990	ETH: 08/15/16-09:18:22 - SHARE FOUND - (GPU 1)
09:18:22:598	2990	send: {"worker":"Amd8350","id":4,"method":"eth_submitWork","params":["0xc5e5a29801f6c841","0x6a1cf91db9ec6c492808201171c05ed9249665847a6c6f4fc5f16fdfbd7c8fbd","0xeffc92c5f990b44d89c846be7b9d01a92621732316feed2d6267574ebc7c1070"]}

09:18:23:284	2990	got 39 bytes
09:18:23:287	2990	buf: {"id":4,"jsonrpc":"2.0","result":true}

09:18:23:287	2990	parse packet: 38
09:18:23:288	2990	ETH: Share accepted (704 ms)!

09:18:23:289	2990	new buf size: 0
09:18:28:593	2990	got 237 bytes
09:18:28:595	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x27716eef1e3381b5a46c5e119fafde0019bba198c0f88e774417ceb4944f7308","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

09:18:28:596	2990	parse packet: 236

GPU0 t=73C fan=54%, GPU1 t=75C fan=56%, GPU2 t=74C fan=59%, GPU3 t=64C fan=68%
19:58:12:111	2fa8	em hbt: 0, fm hbt: 47, 
19:58:12:112	2fa8	watchdog - thread 0, hb time 266
19:58:12:112	2fa8	watchdog - thread 1, hb time 94
19:58:12:112	2fa8	watchdog - thread 2, hb time 344
19:58:12:113	2fa8	watchdog - thread 3, hb time 156
19:58:12:113	2fa8	watchdog - thread 4, hb time 94
19:58:12:113	2fa8	watchdog - thread 5, hb time 281
19:58:12:113	2fa8	watchdog - thread 6, hb time 312
19:58:12:114	2fa8	watchdog - thread 7, hb time 125
19:58:12:518	2990	got 237 bytes
19:58:12:519	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x86680e80862fbabf13f611acbc7d416a3c1162ba7c679900bcca544a6263e19f","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:12:519	2990	parse packet: 236
19:58:12:520	2990	eth: job is the same
19:58:12:520	2990	new buf size: 0
19:58:13:462	2454	ETH: put share nonce fe24d120095eff04
19:58:13:463	2454	ETH round found 1 shares
19:58:13:464	2990	ETH: 08/15/16-19:58:13 - SHARE FOUND - (GPU 0)
19:58:13:465	2990	send: {"worker":"Amd8350","id":4,"method":"eth_submitWork","params":["0xfe24d120095eff04","0x86680e80862fbabf13f611acbc7d416a3c1162ba7c679900bcca544a6263e19f","0x0e2c6270c43217fcfcaddddfe64917e0ca01099b0cd691bc407a99472b21d69a"]}

19:58:14:277	2990	got 39 bytes
19:58:14:278	2990	buf: {"id":4,"jsonrpc":"2.0","result":true}

19:58:14:278	2990	parse packet: 38
19:58:14:279	2990	ETH: Share accepted (813 ms)!

19:58:14:279	2990	new buf size: 0
19:58:16:076	2990	got 237 bytes
19:58:16:076	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x72a9b910cbcdeca3b9632d5a2da70f7770c2d9b322cef623a0a6269c9d2b26dc","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:16:076	2990	parse packet: 236
19:58:16:077	2990	eth: job changed
19:58:16:077	2990	new buf size: 0
19:58:16:077	2990	ETH: 08/15/16-19:58:16 - New job from us1.ethermine.org:4444
19:58:16:078	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
19:58:16:078	2990	ETH - Total Speed: 114.290 Mh/s, Total Shares: 1073, Rejected: 1, Time: 10:40
19:58:16:079	2990	ETH: GPU0 29.630 Mh/s, GPU1 22.115 Mh/s, GPU2 31.244 Mh/s, GPU3 31.301 Mh/s
19:58:18:214	2fa8	Got incorrect temperature 511, ignore
19:58:21:269	2fa8	Got incorrect temperature 511, ignore
19:58:21:725	2990	ETH: checking pool connection...
19:58:21:726	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:58:21:889	2990	got 237 bytes
19:58:21:889	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0xc87e9e460338de581d9d1db96e9a8128c28577123f8837cb905c165446db0f92","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:21:889	2990	parse packet: 236
19:58:21:889	2990	eth: job changed
19:58:21:890	2990	new buf size: 0
19:58:21:890	2990	ETH: 08/15/16-19:58:21 - New job from us1.ethermine.org:4444
19:58:21:891	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
19:58:21:891	2990	ETH - Total Speed: 114.281 Mh/s, Total Shares: 1073, Rejected: 1, Time: 10:40
19:58:21:892	2990	ETH: GPU0 29.589 Mh/s, GPU1 22.093 Mh/s, GPU2 31.299 Mh/s, GPU3 31.301 Mh/s
19:58:22:431	2990	got 237 bytes
19:58:22:431	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0xc87e9e460338de581d9d1db96e9a8128c28577123f8837cb905c165446db0f92","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:22:432	2990	parse packet: 236
19:58:22:432	2990	eth: job is the same
19:58:22:432	2990	new buf size: 0
19:58:24:325	2fa8	Got incorrect temperature 511, ignore
19:58:27:375	2fa8	Got incorrect temperature 511, ignore
19:58:28:553	2990	send: {"id":6,"worker":"Amd8350","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x57dff12", "0x000000000000000000000000000000000000000000000000000000009661a6fc"]}

19:58:29:510	2990	got 39 bytes
19:58:29:511	2990	buf: {"id":6,"jsonrpc":"2.0","result":true}

19:58:29:511	2990	parse packet: 38
19:58:29:511	2990	new buf size: 0
19:58:30:421	2fa8	Got incorrect temperature 511, ignore
19:58:31:741	2990	ETH: checking pool connection...
19:58:31:741	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:58:32:471	2990	got 237 bytes
19:58:32:471	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0xc87e9e460338de581d9d1db96e9a8128c28577123f8837cb905c165446db0f92","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:32:471	2990	parse packet: 236
19:58:32:472	2990	eth: job is the same
19:58:32:472	2990	new buf size: 0
19:58:33:470	2fa8	Got incorrect temperature 511, ignore
19:58:36:517	2fa8	Got incorrect temperature 511, ignore
19:58:39:563	2fa8	Got incorrect temperature 511, ignore
19:58:41:756	2990	ETH: checking pool connection...
19:58:41:757	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:58:42:430	2990	got 237 bytes
19:58:42:430	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0xc87e9e460338de581d9d1db96e9a8128c28577123f8837cb905c165446db0f92","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:42:431	2990	parse packet: 236
19:58:42:431	2990	eth: job is the same
19:58:42:431	2990	new buf size: 0
19:58:42:609	2fa8	Got incorrect temperature 511, ignore
19:58:42:655	2fa8	Got incorrect temperature 511, ignore
19:58:42:656	2fa8	GPU0 t=73C fan=54%, GPU1 t=75C fan=56%, GPU2 t=74C fan=59%, GPU3 t=0C fan=0%
19:58:42:656	2fa8	em hbt: 0, fm hbt: 78, 
19:58:42:656	2fa8	watchdog - thread 0, hb time 203
19:58:42:656	2fa8	watchdog - thread 1, hb time 31
19:58:42:657	2fa8	watchdog - thread 2, hb time 25109
19:58:42:657	2fa8	watchdog - thread 3, hb time 25297
19:58:42:657	2fa8	watchdog - thread 4, hb time 203
19:58:42:657	2fa8	watchdog - thread 5, hb time 16
19:58:42:658	2fa8	watchdog - thread 6, hb time 156
19:58:42:658	2fa8	watchdog - thread 7, hb time 344
19:58:43:796	8bc	ETH: put share nonce 7f35bfc012e50ec4
19:58:43:797	8bc	ETH round found 1 shares
19:58:43:798	2990	ETH: 08/15/16-19:58:43 - SHARE FOUND - (GPU 0)
19:58:43:798	2990	send: {"worker":"Amd8350","id":4,"method":"eth_submitWork","params":["0x7f35bfc012e50ec4","0xc87e9e460338de581d9d1db96e9a8128c28577123f8837cb905c165446db0f92","0xab8bab303d6c912e06c34161a74301504f28e318fa9fda712f34d257adcd8925"]}

19:58:44:528	2990	got 39 bytes
19:58:44:530	2990	buf: {"id":4,"jsonrpc":"2.0","result":true}

19:58:44:531	2990	parse packet: 38
19:58:44:531	2990	ETH: Share accepted (734 ms)!

19:58:44:532	2990	new buf size: 0
19:58:45:710	2fa8	Got incorrect temperature 511, ignore
19:58:47:520	2990	got 237 bytes
19:58:47:522	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x9b65d685844ed5e03c7697527d288971394823e7f80686d55dbb6faf9d2728c9","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:47:523	2990	parse packet: 236
19:58:47:523	2990	eth: job changed
19:58:47:523	2990	new buf size: 0
19:58:47:524	2990	ETH: 08/15/16-19:58:47 - New job from us1.ethermine.org:4444
19:58:47:524	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
19:58:47:525	2990	ETH - Total Speed: 92.184 Mh/s, Total Shares: 1074, Rejected: 1, Time: 10:41
19:58:47:525	2990	ETH: GPU0 29.594 Mh/s, GPU1 0.000 Mh/s, GPU2 31.260 Mh/s, GPU3 31.330 Mh/s
19:58:48:569	2990	send: {"id":6,"worker":"Amd8350","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x5773935", "0x000000000000000000000000000000000000000000000000000000009661a6fc"]}

19:58:48:763	2fa8	Got incorrect temperature 511, ignore
19:58:49:273	2990	got 39 bytes
19:58:49:274	2990	buf: {"id":6,"jsonrpc":"2.0","result":true}

19:58:49:274	2990	parse packet: 38
19:58:49:275	2990	new buf size: 0
19:58:51:772	2990	ETH: checking pool connection...
19:58:51:773	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:58:51:831	2fa8	Got incorrect temperature 511, ignore
19:58:52:477	2990	got 237 bytes
19:58:52:478	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x9b65d685844ed5e03c7697527d288971394823e7f80686d55dbb6faf9d2728c9","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:58:52:478	2990	parse packet: 236
19:58:52:478	2990	eth: job is the same
19:58:52:478	2990	new buf size: 0
19:58:54:891	2fa8	Got incorrect temperature 511, ignore
19:58:57:940	2fa8	Got incorrect temperature 511, ignore
19:59:00:391	2990	got 237 bytes
19:59:00:395	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x76a44d77973aa237d0e3fb983ede43231e1552a98062cb885de5053dd049c376","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:00:395	2990	parse packet: 236
19:59:00:395	2990	eth: job changed
19:59:00:396	2990	new buf size: 0
19:59:00:396	2990	ETH: 08/15/16-19:59:00 - New job from us1.ethermine.org:4444
19:59:00:396	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
19:59:00:397	2990	ETH - Total Speed: 92.155 Mh/s, Total Shares: 1074, Rejected: 1, Time: 10:41
19:59:00:397	2990	ETH: GPU0 29.605 Mh/s, GPU1 0.000 Mh/s, GPU2 31.226 Mh/s, GPU3 31.324 Mh/s
19:59:01:019	2fa8	Got incorrect temperature 511, ignore
19:59:01:787	2990	ETH: checking pool connection...
19:59:01:788	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:59:02:631	2990	got 237 bytes
19:59:02:631	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x76a44d77973aa237d0e3fb983ede43231e1552a98062cb885de5053dd049c376","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:02:632	2990	parse packet: 236
19:59:02:632	2990	eth: job is the same
19:59:02:632	2990	new buf size: 0
19:59:04:067	2fa8	Got incorrect temperature 511, ignore
19:59:06:233	2990	got 237 bytes
19:59:06:233	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x41df56df4003512eeec5c9a4f7f6e4c625c7be02bdde2ff22fc0679c7c23fd07","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:06:234	2990	parse packet: 236
19:59:06:234	2990	eth: job changed
19:59:06:234	2990	new buf size: 0
19:59:06:235	2990	ETH: 08/15/16-19:59:06 - New job from us1.ethermine.org:4444
19:59:06:235	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
19:59:06:236	2990	ETH - Total Speed: 92.134 Mh/s, Total Shares: 1074, Rejected: 1, Time: 10:41
19:59:06:236	2990	ETH: GPU0 29.590 Mh/s, GPU1 0.000 Mh/s, GPU2 31.268 Mh/s, GPU3 31.275 Mh/s
19:59:07:117	2fa8	Got incorrect temperature 511, ignore
19:59:08:584	2990	send: {"id":6,"worker":"Amd8350","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x576d638", "0x000000000000000000000000000000000000000000000000000000009661a6fc"]}

19:59:10:166	2fa8	Got incorrect temperature 511, ignore
19:59:10:880	2990	got 39 bytes
19:59:10:880	2990	buf: {"id":6,"jsonrpc":"2.0","result":true}

19:59:10:880	2990	parse packet: 38
19:59:10:881	2990	new buf size: 0
19:59:11:803	2990	ETH: checking pool connection...
19:59:11:803	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:59:12:477	2990	got 237 bytes
19:59:12:477	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x41df56df4003512eeec5c9a4f7f6e4c625c7be02bdde2ff22fc0679c7c23fd07","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:12:478	2990	parse packet: 236
19:59:12:478	2990	eth: job is the same
19:59:12:478	2990	new buf size: 0
19:59:13:222	2fa8	Got incorrect temperature 511, ignore
19:59:13:270	2fa8	Got incorrect temperature 511, ignore
19:59:13:271	2fa8	GPU0 t=73C fan=54%, GPU1 t=74C fan=56%, GPU2 t=74C fan=59%, GPU3 t=0C fan=0%
19:59:13:271	2fa8	em hbt: 0, fm hbt: 78, 
19:59:13:272	2fa8	watchdog - thread 0, hb time 313
19:59:13:272	2fa8	watchdog - thread 1, hb time 141
19:59:13:272	2fa8	watchdog - thread 2, hb time 55734
19:59:13:272	2fa8	watchdog - thread 3, hb time 55922
19:59:13:272	2fa8	watchdog - thread 4, hb time 344
19:59:13:273	2fa8	watchdog - thread 5, hb time 172
19:59:13:273	2fa8	watchdog - thread 6, hb time 78
19:59:13:273	2fa8	watchdog - thread 7, hb time 266
19:59:16:332	2fa8	Got incorrect temperature 511, ignore
19:59:19:390	2fa8	Got incorrect temperature 511, ignore
19:59:21:819	2990	ETH: checking pool connection...
19:59:21:819	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:59:22:436	2fa8	Got incorrect temperature 511, ignore
19:59:22:510	2990	got 237 bytes
19:59:22:511	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x41df56df4003512eeec5c9a4f7f6e4c625c7be02bdde2ff22fc0679c7c23fd07","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:22:511	2990	parse packet: 236
19:59:22:511	2990	eth: job is the same
19:59:22:511	2990	new buf size: 0
19:59:25:507	2fa8	Got incorrect temperature 511, ignore
19:59:25:768	2990	got 237 bytes
19:59:25:768	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0x43d5729c9c54ef098b00e52b13211ad1c8869497ab02fd298ff01bb045b7cc61","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:25:768	2990	parse packet: 236
19:59:25:768	2990	eth: job changed
19:59:25:769	2990	new buf size: 0
19:59:25:769	2990	ETH: 08/15/16-19:59:25 - New job from us1.ethermine.org:4444
19:59:25:769	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
19:59:25:770	2990	ETH - Total Speed: 91.495 Mh/s, Total Shares: 1074, Rejected: 1, Time: 10:41
19:59:25:770	2990	ETH: GPU0 29.613 Mh/s, GPU1 0.063 Mh/s, GPU2 30.729 Mh/s, GPU3 31.090 Mh/s
19:59:28:562	2fa8	Got incorrect temperature 511, ignore
19:59:28:600	2990	send: {"id":6,"worker":"Amd8350","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x57dda50", "0x000000000000000000000000000000000000000000000000000000009661a6fc"]}

19:59:29:710	2990	got 39 bytes
19:59:29:711	2990	buf: {"id":6,"jsonrpc":"2.0","result":true}

19:59:29:711	2990	parse packet: 38
19:59:29:711	2990	new buf size: 0
19:59:31:612	2fa8	Got incorrect temperature 511, ignore
19:59:31:835	2990	ETH: checking pool connection...
19:59:31:835	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:59:32:511	2990	got 237 bytes
19:59:32:512	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0x43d5729c9c54ef098b00e52b13211ad1c8869497ab02fd298ff01bb045b7cc61","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:32:512	2990	parse packet: 236
19:59:32:512	2990	eth: job is the same
19:59:32:513	2990	new buf size: 0
19:59:34:659	2fa8	Got incorrect temperature 511, ignore
19:59:37:721	2fa8	Got incorrect temperature 511, ignore
19:59:40:773	2fa8	Got incorrect temperature 511, ignore
19:59:41:850	2990	ETH: checking pool connection...
19:59:41:850	2990	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:59:42:420	2990	got 237 bytes
19:59:42:420	2990	buf: {"id":0,"jsonrpc":"2.0","result":["0xe636cce609a1171048c8030d52748316f719fa307e7fceb18f07d7db1c71d1da","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:42:421	2990	parse packet: 236
19:59:42:421	2990	eth: job changed
19:59:42:421	2990	new buf size: 0
19:59:42:421	2990	ETH: 08/15/16-19:59:42 - New job from us1.ethermine.org:4444
19:59:42:422	2990	target: 0x0000000112e0be82 (diff: 4000MH), epoch #69
19:59:42:422	2990	ETH - Total Speed: 92.139 Mh/s, Total Shares: 1074, Rejected: 1, Time: 10:42
19:59:42:423	2990	ETH: GPU0 29.612 Mh/s, GPU1 0.000 Mh/s, GPU2 31.221 Mh/s, GPU3 31.306 Mh/s
19:59:42:520	2990	got 237 bytes
19:59:42:520	2990	buf: {"id":3,"jsonrpc":"2.0","result":["0xe636cce609a1171048c8030d52748316f719fa307e7fceb18f07d7db1c71d1da","0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}

19:59:42:520	2990	parse packet: 236
19:59:42:521	2990	eth: job is the same
19:59:42:521	2990	new buf size: 0
19:59:43:854	2fa8	Got incorrect temperature 511, ignore
19:59:43:911	2fa8	Got incorrect temperature 511, ignore
19:59:43:912	2fa8	GPU0 t=73C fan=54%, GPU1 t=74C fan=56%, GPU2 t=74C fan=59%, GPU3 t=0C fan=0%
19:59:43:913	2fa8	em hbt: 0, fm hbt: 63, 
19:59:43:913	2fa8	watchdog - thread 0, hb time 297
19:59:43:913	2fa8	watchdog - thread 1, hb time 125
19:59:43:913	2fa8	watchdog - thread 2, hb time 86375
19:59:43:914	2fa8	WATCHDOG: GPU 1 hangs in OpenCL call, exit
19:59:43:914	2fa8	watchdog - thread 3, hb time 18407
19:59:43:914	2fa8	watchdog - thread 4, hb time 79
19:59:43:915	2fa8	watchdog - thread 5, hb time 266
19:59:43:915	2fa8	watchdog - thread 6, hb time 360
19:59:43:915	2fa8	watchdog - thread 7, hb time 172
19:59:44:919	2fa8	Restarting OK, exit...

Then miner restarts with the rx470 unable to create the dag. So it mines for a brief amount of time until the first Dev fee switch at which time locks up the entire pc.

Best Regards
d57heinz

[Marvell1]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.

I have mutiple versions of 470 cards , MSI, XFX, and a few Saphire OC cards all 4GB and they all work flawlessley with Calymore not the latest version the last one.

[Eyedol-X]

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

Yeah the nvidia driver issue sucks, thinking of ditching this GTX 970 for that reason lol -- Will you be planning on releasing a CUDA 6.5 version of the miner?

[Flenger]

Driver 372.54 Win7/64 GTX1060 18.7MHs ETC + 250MHs SC dcri 40 without overclocking

[Meteeray]

Claymore You are a genius Smiley

[d57heinz]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.

I have mutiple versions of 470 cards , MSI, XFX, and a few Saphire OC cards all 4GB and they all work flawlessley with Calymore not the latest version the last one.

version of miner or display driver.. IM on 16.8.2 hotfix and v6cdm.. Couldnt get last version to work either.  Could you give some more info on your command line setup.. Are you serializing? or using a different intensity by chance.  TIA

Could be that its due to being a mix in my system of old and new.. I got a new msi mobo today with 7 pcie so i will start that build off with the rx470 by itself to eliminate any issue my home pc may have  Thanks for letting me know that at least someone is having a good exp with the miner and the new amd cards. gives me hope. Now i just have to figure out why genoil works and this one dont.  I let genoil run for 4 days and it never glitched.  hmmmm

Best Regards
d57heinz

[Marvell1]

Celeron G1620, PRO BTC, 6xGTX1070, Win 8.1, Driver 372.54  WHQL.

EthDcrMiner load CPU 60-80%, because this is not a stable hash, is this normal?
+ when stopping miner, sometimes, driver stops responding.

I though the 1070s get closer to 700 mhs on sia

[Marvell1]

New 372.54 Nvidia drivers released today.  No fix for maxwell win 10 poor eth performance unfortunately......

Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.

The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.

@claymore.  Still locks up with rx470. This round made it 10hr 42 min.  Always locks up on the Dev fee switch at random times of course. Opencl hang.  Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470.  Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works.  Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead.  Seems to do the trick.

Best Regards
d57heinz

If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.

I have mutiple versions of 470 cards , MSI, XFX, and a few Saphire OC cards all 4GB and they all work flawlessley with Calymore not the latest version the last one.

version of miner or display driver.. IM on 16.8.2 hotfix and v6cdm.. Couldnt get last version to work either.  Could you give some more info on your command line setup.. Are you serializing? or using a different intensity by chance.  TIA

Could be that its due to being a mix in my system of old and new.. I got a new msi mobo today with 7 pcie so i will start that build off with the rx470 by itself to eliminate any issue my home pc may have  Thanks for letting me know that at least someone is having a good exp with the miner and the new amd cards. gives me hope. Now i just have to figure out why genoil works and this one dont.  I let genoil run for 4 days and it never glitched.  hmmmm

Best Regards
d57heinz

I'm at work so i cant send my entire string I am using nanpool's stratup ports for SIA and ETH

I did not apply the hotfix version of the driver , I'm using the 16.7.3 driver on my two 470 only rigs ( one is 5 cards , one is six cards)

I think there is a problem with that driver though since I cant get the memory over 1700 speed on that driver and even when I max out the memory the hash rate is fixed at around 23mhs.  

What i did find is you can get the 470s to close to 24 mhs if you increase the power limit to +30% but the power usage jumps from 110 watts dual to over 150 watts so i still run the 470s at stock mem (since rasinng the mem seems to do nothing unlike the 480 cards) at around 20 mhs eth and 380 sia.

I have some 8gig 470s delivered today or tomorrow and hopefully the memory speed can be increased on those and actually makes a difference.

When i get home in a few hours i'll post my full claymore string and maybe that helps.

*** I just default eth intensity and 30 dcri  **

[d57heinz]

@Marvell1

Thanks I would appreciate that.  I'm going to build up that Msi board today and test the card on its own.  Also I've never tested the 16.7.3 as they had the 16.8.1 already and I just started there.  I will check the older driver. I will say tho the xfx w/16.8.2 will allow me to change the different settings clock/mem etc.  I just haven't got there yet with the hanging issues I'm having.    Thanks again for the help.

Best Regards
d57heinz

[Claymore]

v6.1:

- Fixed issue with high CPU load for NVIDIA cards.
- NVIDIA: now two builds are available: for CUDA 7.5 and for CUDA 6.5.
- Fixed issue with resetting WattMan settings.

NOTE: Still no Linux version yet, I need to have stable Windows version firstly.
NOTE2: I don't see good hashrates in cuda 6.5, at least in Win7. May be some specific drivers version must be used?

[fredeq]

Driver 372.54 Win7/64 GTX1060 18.7MHs ETC + 250MHs SC dcri 40 without overclocking

Any chance you know your power usage at the wall?