Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[vince212]

anyone here who can share their hashrate on this miner using a 1060 and if it is possible the power consumption as well thanks!

[jeremyf327]

Can someone share their .bat file to dual mine ethereum and expanse? Mine is giving me an "failed to get n2size" error.

EthDcrMiner64.exe -epool us2.ethermine.org:14444 -ewal account.name -epsw x -dpool exp.suprnova.cc:3333 -dwal account.name -dpsw x -esm 3

[Bytekiller]

Windows 10 Defender kill yesterday the 9.3 as Trojan: Win32/Skeeyah.A!rfn  

[siampumpkin]

Can someone share their .bat file to dual mine ethereum and expanse? Mine is giving me an "failed to get n2size" error.

EthDcrMiner64.exe -epool us2.ethermine.org:14444 -ewal account.name -epsw x -dpool exp.suprnova.cc:3333 -dwal account.name -dpsw x -esm 3

You cannot dual Mine ETH and Expanse since Expanse is a fork of ETH that uses the same algorithm. You can dual Mine Ethereum and another compatible coin like Decreed, Sia or Pascal or mine Expanse and Decreed, Sia or Pascal. You cannot dual mine two ETH-Hash coins.

[klf]

Im having some problems running the miner on my system. it gives me a CUDA error, saying that it cant allocate for the DAG



ive tried -lidag or just -li to the lowest intensity, got the latest drivers from nvidia, but it still gives the same error. help?

You can mine one of the other Forks of ETH like MusicCoin or Expansys

I'm also new to mining and just tried a couple of days back on my PC and got the same error message like above. Is it because of my PC issue or script or settings issue?

I though if it works then can invest money on small rig first and then can continue. Your suggestions will help a lot and many thanks in advance.

[rednoW]

Need advice from Mister Claymore or someone else.
I'm mining now at ethermine.org (Europe (France): eu1.ethermine.org:4444)
The pool uses diff 40M

My 3-4 cards rigs are doing fine, but I have 2 standalone comps with only one 30mhs card in each. And this one-card rigs have huge (5-15%) stale share rate reported by pool. all rigs have identical and fast Internet access with the multi-card rigs, 70-100ms latency to pool. Is it due to high pool diff and low (30mhs) rig speed? Is there a way to fix this without changing a pool? I can't move this cards to multi-card rigs ((
 
I'm using latest Claymore 9.5 but older versions seem to behave the same.
Thanx in advance

[aarons6]

Hello.
I am using R9 380 Nitro Sapphire.
When i am mining solo Ethereum all is working fine, but when i dual mine with DECRED I get GPU artefacts.
Why is that?
Thank you!

anyone?

my 380 does the same thing, i think its just not fast enough.

[thaelin]

   Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

Will be adding a MSI Z170A as well when the cards and risers show

thaelin

[ctmk01]

  Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

Will be adding a MSI Z170A as well when the cards and risers show

thaelin

For windows go win 10 64bit LTSB or go home. Simple

[liomojo1]

Guys are you getting with 280x previous 15mgh or it is down to 12.5 now?

[ozoner99]

Hi, I'm hoping someone can help me. I have a couple of MSI GTX1060s which hash nicely at around 23mhash on eth.  I just bought some Asus GTX 1060s, and they are sitting at 18.8 - if I push the memory past +600 in afterburner it will crash, and if I clock the core up by more than 100mhz it will crash as well.  Same everything as the MSI cards....

Have I just managed to get a crap batch of cards?  Or is there somethiung I can do to squeeze some more rate out of these cards?

Thanks in advance.

[liomojo1]

Did you put them in p0state , did you use the same driver? If the settings and clocks are the same then may be memory is different!

[Teress]

  Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

Will be adding a MSI Z170A as well when the cards and risers show

thaelin

For windows go win 10 64bit LTSB or go home. Simple

What is LTSB???

[ozoner99]

Did you put them in p0state , did you use the same driver? If the settings and clocks are the same then may be memory is different!

Hi, thanks for the reply. I don't believe it's possible to get the 1060 into p0 state - I tried and couldn't make it work. The MSI works fine without changing to p0 (it stays in p2 as well). A quick google shows nobody else is running p0 on that card either.

The memory is hynix, according to GPU-Z.  Very strange - it's reproducible with one MSI card and one ASUS card int he same system - the ASUS card hashes about 4mh slower with the same EVERYTHING.

Wonder if there's an old version of the bios I could try or something.... Any other ideas?

[amirheavy666]

Can mine one AMD graphic (example R9 390X ) and one Nvidia ( for example 1060) in same Pc

what i must do for mining with claymore with this two graphic card ?

[athas1985]

http://2.pik.vn/20170b5c0b2e-6891-454c-a393-69e343de3c3e.png
Help why gpu5 failed

[GH]

Claymore,
the problem with ETHMan 3.1 + Dualminer 9.5
If some rig go down, and then after some time goes up, it dosent restore in ETHMan, on screenshot you see that miner restarted and work, i launched web console and it works already 2 minutes, but ETHMan still show "lost ****". Even after 10 minutes ETHMan dosent see rig. So as it was with ETHMan 3.0, I need restart it to see all rigs stats again.

If you included cryptography and https, then maybe here some trouble with ssl? need to update certificate if connection was lost?

Can confirm this, same problem here.
The last update of EthMan improved the 100% lock after a warning, but a rig which was offline and comes back up is not (always?) shown as alive until EthMan is restarted.
Also the batch action is still not retriggered in case of a persisting failure.

I spent half a day in attempts to reproduce it, but it works fine for me, weird. If you can 100% reproduce this issue I can prepare debug version with logging and send it to you so I can get more info. PM me if you want to participate.
Retriggering: if a rig was lost, BAT file will be executed. If rig is back again and then again will be lost, BAT will be executed again. What's wrong exactly?

I can not 100% reproduce it. Just had the error again two hours ago. Rig already back online but shown as offline for 2+ hours. But it does not happen always, some additional aspect I don't see at the moment must play a role here. But of course I can try to help if you have a logging debug version for me.

Retriggering: as I already wrote - a single action may not be sufficient to bringt the rig back up. (i.e.: rig hangs - action triggered -> auto-reset rig - if windows boots into recovery mode because it is the x-th reset in a row you are ...... - the rig stays offline waiting for user input until infinity).
So: if an action did not bring the rig back up after the same delay time, it should trigger the same action again and again until the problem is resolved. (Leaving out luxury options like number of max. attempts or configurable follow up delay  )

@claymore:

1) Maybe I found a hint: Is it possible that it is some kind of IP address caching issue? It seems to happen to rigs which reboot and get another (dynamic) IP address. If I change the "IP" field in EthMan to the current numeric IP address or use an alternative DNS name which resolves to the same computer EthMan shows correct "up" state. If I change it to the old one its shown "down" again. Restarting EthMan seems to update these values and the rig ist shown online, even with the same old name ("IP" entry). Or it is some kind of update process which is only executed when adding/changing a rig entry. But maybe this helps...

2) Did you read my comment about retriggering above and understand my issue?

[Crypto_Future]

how much does dual mining increase power consumption on rx470 GPU's?

I am using -dcri 10 for minimum effect on ETH production

[sigb0y]

Help why gpu5 failed

Looks like you have overclocked. Remove it, install original bios und hopefully it would run stable. If not, you have destroyed your GPU.

[frostminer]

  Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

Will be adding a MSI Z170A as well when the cards and risers show

thaelin

For windows go win 10 64bit LTSB or go home. Simple

What is LTSB???

https://www.howtogeek.com/273824/windows-10-without-the-cruft-windows-10-ltsb-explained/