Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[kgminer]

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

[Efemen]

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

Did you mine other Blake2S successfully? If not, then the setting is not right.

[Lukke]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

No it is not running stable. It is disconnecting and affecting stability of ETH mining as well. Check my screenshot - hashrate was on zero hour ago!!
https://s9.postimg.org/xh55yptpr/hashrate.png

[djmuler]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

No it is not running stable. It is disconnecting and affecting stability of ETH mining as well. Check my screenshot - hashrate was on zero hour ago!!

Same here, and overall for 24h mining im geting 1/4 of the XVG whattomine calculated

[Lukke]

On my another mining farm I was testing zpool.ca. It is even worse than with nlpool... Calculated 600 coins, earned just 120 and in "last 50 eatnings" there is a bunch of other coins Shield, Ninja, Taj, although in password fields in claymore is correctly set "c=XVG"...  Trying antminepool.com now... They said there set up a new server so lets see....

[Metroid]

Trying antminepool.com now... They said there set up a new server so lets see....

Same problems, like I said before, if by miracle you connect then your pc restarts -->? gameover hehe

[bskc]

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day. 

[peterboy1]

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day. 

so you are the official unimining representative here?

your pool is stable, but please solve the low earning. we almost get 50-80% less earning based on current difficulty mining xvg.

[HamsterBernd]

Hi,
unfortunately i have some problems. Everything works great for a day sometimes longer. Then the driver crash “amd-pro-dkms 17.40-483984:amdgpu kernel module failed” after that i have to install everthink new. It is not enough to deinstall the gpu driver. I use 5 x R9 390 with two 1000W power supplies. Do you have any idears?
should i try the Catalyst (Crimson) 15.12 driver for the cards?
I also saw, there is a newer version of Claymore Ethereum miner.

Thanks Sascha



ASRock H81 Pro BTC
8 GB
5 x R9 390
2 x 1000W power supplies

Xubuntu
AMDGPU-PRO drivers
Claymore’s Ethereum miner 10.2
Already checked singel and dual mode
nothing overclocked
nanopool

[Metroid]

so you are the official unimining representative here?

your pool is stable, but please solve the low earning. we almost get 50-80% less earning based on current difficulty mining xvg.

I dont think he cares, the only way to solve this is to create a very good pool, so nobody will mine with them, so they will have to pay the miners right to keep them in their pool, as it stands all xvg pools are thieves and all of them know it.

[Swiped]

Getting this error while running version 10.6 and can't figure out how to stop it:

03:36:40:155   1200   GPU 0 temp = 69, old fan speed = 50, new fan speed = 40

03:36:40:171   1200   GPU 1 temp = 68, old fan speed = 49, new fan speed = 40

03:36:40:186   1200   GPU 2 temp = 68, old fan speed = 55, new fan speed = 40

03:36:40:233   1200   GPU 3 temp = 72, old fan speed = 69, new fan speed = 58

03:36:40:249   1200   GPU 4 temp = 74, old fan speed = 63, new fan speed = 53

03:36:40:280   1200   GPU 5: got incorrect temperature 511, ignore
03:36:40:280   1200   GPU 6: got incorrect temperature 511, ignore

It shuts the miner down.  I am running 7 Sapphire rx 480 8g cards with Windows 10, and I have not figured out what to do to get rid of it.  May be the result of using a pcie splitter on the 6th slot, but I have 40 other machines just like it and none of them are doing it.  Please share any experiences you have with this to give me some ideas.  I have reinstalled the drivers 3 times (August 234d blockchain drivers) flashed the video cards' bios back to the original, and removed all control parameters from the miner.  Looking for the "what else" I can try.  Thanks.

[rul3s]

Hello guys,
I've got a Sapphire Pulse RX560 OC, to start minning with Claymore Minner i should go with the last version of it (Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v10.6 - Catalyst 15.12-17.x - CUDA 8.0_9.1_7.5_6.5.zip) and the last AMD drivers (adrenalin-edition-18.2.2)?

Thanks for your help!

[Johnnydex]

For those of you like me who had XSH earnings appearing on nlpool while only mining for XVG. Yesterday I switched back to antminepool when I saw they had added a new server, (yeah still not very good). This morning I checked on nlpool just to see if they had things going again and guess what... XSH earnings from overnight. The most recent was from a block mined three hours earlier and I haven't had any of my rigs pointed there in over 12 hours. Can't decide if I feel better or worse about it.

[Ifreet]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

So what about my XVG that suddenly disappeared? it's not on the pool wallet and not on my XVG desktop wallet...

And please create a thread only for your pool related problems, etc...

[Munka9]

For those of you like me who had XSH earnings appearing on nlpool while only mining for XVG. Yesterday I switched back to antminepool when I saw they had added a new server, (yeah still not very good). This morning I checked on nlpool just to see if they had things going again and guess what... XSH earnings from overnight. The most recent was from a block mined three hours earlier and I haven't had any of my rigs pointed there in over 12 hours. Can't decide if I feel better or worse about it.

Well if it makes you feel any better about it, nlpool is back to misbehaving again. Its by far the best when it's working. But is routinely dropping to 0 MHS and disconnecting miners.

[kgminer]

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

Did you mine other Blake2S successfully? If not, then the setting is not right.

yes xvg on nlpool and antminepool.com works perfectly fine. It can't find anything wrong with the settings.

[mshordja]

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

Did you mine other Blake2S successfully? If not, then the setting is not right.

yes xvg on nlpool and antminepool.com works perfectly fine. It can't find anything wrong with the settings.

most of the time the miner can't connect to the pool, especial with nlpool

[RAKOT]

Hello Everyone!

Could somebody help me to solve my isssu ?

Ive got an headache trying to figure out this problem. In some time one of GPUs show 0 hashrate. CM trying to restart itself and no good.

It repeats the same message over and over until i restart whole rig.


GPUs are with modded bios.


Log before stuck situation.

10:08:59:195   1534   parse packet: 242
10:08:59:201   1534   ETH: job changed
10:08:59:205   1534   new buf size: 0
10:08:59:216   1534   ETH: 02/20/18-10:08:59 - New job from eth-us.dwarfpool.com:8008
10:08:59:221   1534   target: 0x0000000225c17d04 (diff: 2000MH), epoch 170(2.33GB)
10:08:59:234   1534   ETH - Total Speed: 53.907 Mh/s, Total Shares: 466, Rejected: 0, Time: 03:06
10:08:59:239   1534   ETH: GPU0 25.344 Mh/s, GPU1 28.563 Mh/s, GPU2 0.000 Mh/s
10:09:01:593   1774   GPU 0 temp = 62, old fan speed = 32, new fan speed = 31

10:09:01:602   1774   GPU 1 temp = 63, old fan speed = 33, new fan speed = 32

10:09:01:611   1774   GPU 2 temp = 50, old fan speed = 0, new fan speed = 25

10:09:02:308   1534   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x371748c", "0x00000000000000000000000000000000000000000000000000000000923a31c8"]}

10:09:02:492   1534   got 40 bytes
10:09:02:492   1534   buf: {"id":6,"jsonrpc":"2.0","result":true}


10:09:02:508   1534   parse packet: 38
10:09:02:524   1534   new buf size: 0
10:09:03:454   1128   checked ETH share on CPU, spent 8ms
10:09:03:472   1128   ETH: put share nonce 738c0b40035de3e9
10:09:03:476   1128   ETH round found 1 shares
10:09:03:492   1534   ETH: 02/20/18-10:09:03 - SHARE FOUND - (GPU 0)
10:09:03:492   1534   send: {"id":10,"method":"eth_submitWork","params":["0x738c0b40035de3e9","0xbeb6b9a00de9db7e7692a5b5b4111a29c341e1936d816e77e1177f34a2df9ac8","0xe74c85291e01a2e73d96e5bda61beb7c551e8d9fa92e24b3e228b69589cc62c9"]}

10:09:03:670   1534   got 41 bytes
10:09:03:676   1534   buf: {"id":10,"jsonrpc":"2.0","result":true}


10:09:03:676   1534   parse packet: 39
10:09:03:692   1534   ETH: Share accepted (203 ms)!

10:09:03:708   1534   new buf size: 0
10:09:03:869   1534   got 244 bytes
10:09:03:876   1534   buf: {"result":["0xadfd4a2f48cb0c335f7c1045117e13298c26bf36070be9a84a9ecbe633e34d9f","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


10:09:03:877   1534   parse packet: 242
10:09:03:877   1534   ETH: job changed
10:09:03:892   1534   new buf size: 0
10:09:03:892   1534   ETH: 02/20/18-10:09:03 - New job from eth-us.dwarfpool.com:8008
10:09:03:906   1534   target: 0x0000000225c17d04 (diff: 2000MH), epoch 170(2.33GB)
10:09:03:919   1534   ETH - Total Speed: 54.779 Mh/s, Total Shares: 467, Rejected: 0, Time: 03:06
10:09:03:923   1534   ETH: GPU0 25.873 Mh/s, GPU1 28.906 Mh/s, GPU2 0.000 Mh/s
10:09:04:656   1774   GPU 0 temp = 62, old fan speed = 31, new fan speed = 30

10:09:04:656   1774   GPU 1 temp = 63, old fan speed = 33, new fan speed = 32

10:09:04:677   1774   GPU 2 temp = 50, old fan speed = 0, new fan speed = 25

10:09:05:071   1534   got 244 bytes
10:09:05:078   1534   buf: {"result":["0x4d0a01524a69139c421c3c7e0f98e770062b2d6faa71976899250cb84f8954fe","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


10:09:05:078   1534   parse packet: 242
10:09:05:093   1534   ETH: job changed
10:09:05:109   1534   new buf size: 0
10:09:05:125   1534   ETH: 02/20/18-10:09:05 - New job from eth-us.dwarfpool.com:8008
10:09:05:125   1534   target: 0x0000000225c17d04 (diff: 2000MH), epoch 170(2.33GB)
10:09:05:125   1534   ETH - Total Speed: 57.777 Mh/s, Total Shares: 467, Rejected: 0, Time: 03:06
10:09:05:140   1534   ETH: GPU0 28.874 Mh/s, GPU1 28.902 Mh/s, GPU2 0.000 Mh/s
10:09:05:681   174c   em hbt: 15, fm hbt: 109,
10:09:05:681   174c   watchdog - thread 0 (gpu0), hb time 203
10:09:05:696   174c   watchdog - thread 1 (gpu0), hb time 63
10:09:05:696   174c   watchdog - thread 2 (gpu1), hb time 78
10:09:05:712   174c   watchdog - thread 3 (gpu1), hb time 234
10:09:05:712   174c   watchdog - thread 4 (gpu2), hb time 73781
10:09:05:728   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit
10:09:05:728   174c   watchdog - thread 5 (gpu2), hb time 73969
10:09:05:743   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit
10:09:05:759   174c   GPU 0 temp = 62, old fan speed = 30, new fan speed = 29

10:09:05:759   174c   GPU 1 temp = 63, old fan speed = 33, new fan speed = 32

10:09:05:775   174c   GPU 2 temp = 50, old fan speed = 0, new fan speed = 25

10:09:05:900   174c   Quit, please wait...
10:09:07:702   1774   GPU 0 temp = 56, old fan speed = 29, new fan speed = 25

10:09:07:717   1774   GPU 1 temp = 59, old fan speed = 34, new fan speed = 29

10:09:07:717   1774   GPU 2 temp = 50, old fan speed = 0, new fan speed = 25

10:09:16:800   174c   Restarting OK, exit...

 

Help please....

[adyspd]

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day. 

We can't stop blaming you, everyone needs to know the truth !
Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ).
You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%.
With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair.

Thanks.

[silvi0]

Hello Everyone!

Could somebody help me to solve my isssu ?

Ive got an headache trying to figure out this problem. In some time one of GPUs show 0 hashrate. CM trying to restart itself and no good.

It repeats the same message over and over until i restart whole rig.
https://imgur.com/a/j99nK

GPUs are with modded bios.

10:09:05:728   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit
10:09:05:743   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit

10:09:16:800   174c   Restarting OK, exit...

 

Help please....
[/quote]

GPU 2 hangs.. Detach that GPU and try if the problems are solved, after that reinstall that GPU (Modding and driver)