Ifreet
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 20, 2018, 09:38:58 AM |
|
To avoid most of questions:
NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.
However, the old server is still running and will finish it's payments, so no money is lost.
The pool is running stable again..... Finally.
So what about my XVG that suddenly disappeared? it's not on the pool wallet and not on my XVG desktop wallet... And please create a thread only for your pool related problems, etc...
|
|
|
|
Munka9
Newbie
Offline
Activity: 30
Merit: 0
|
|
February 20, 2018, 09:45:53 AM |
|
For those of you like me who had XSH earnings appearing on nlpool while only mining for XVG. Yesterday I switched back to antminepool when I saw they had added a new server, (yeah still not very good). This morning I checked on nlpool just to see if they had things going again and guess what... XSH earnings from overnight. The most recent was from a block mined three hours earlier and I haven't had any of my rigs pointed there in over 12 hours. Can't decide if I feel better or worse about it.
Well if it makes you feel any better about it, nlpool is back to misbehaving again. Its by far the best when it's working. But is routinely dropping to 0 MHS and disconnecting miners.
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
February 20, 2018, 09:53:54 AM |
|
Anyone successfully mining SHIELD (blake2s algo) coin? I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.
Did you mine other Blake2S successfully? If not, then the setting is not right. yes xvg on nlpool and antminepool.com works perfectly fine. It can't find anything wrong with the settings.
|
|
|
|
mshordja
|
|
February 20, 2018, 10:28:09 AM |
|
Anyone successfully mining SHIELD (blake2s algo) coin? I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.
Did you mine other Blake2S successfully? If not, then the setting is not right. yes xvg on nlpool and antminepool.com works perfectly fine. It can't find anything wrong with the settings. most of the time the miner can't connect to the pool, especial with nlpool
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
February 20, 2018, 10:29:13 AM |
|
Hello Everyone! Could somebody help me to solve my isssu ? Ive got an headache trying to figure out this problem. In some time one of GPUs show 0 hashrate. CM trying to restart itself and no good. It repeats the same message over and over until i restart whole rig. GPUs are with modded bios. Log before stuck situation. 10:08:59:195 1534 parse packet: 242 10:08:59:201 1534 ETH: job changed 10:08:59:205 1534 new buf size: 0 10:08:59:216 1534 ETH: 02/20/18-10:08:59 - New job from eth-us.dwarfpool.com:8008 10:08:59:221 1534 target: 0x0000000225c17d04 (diff: 2000MH), epoch 170(2.33GB) 10:08:59:234 1534 ETH - Total Speed: 53.907 Mh/s, Total Shares: 466, Rejected: 0, Time: 03:06 10:08:59:239 1534 ETH: GPU0 25.344 Mh/s, GPU1 28.563 Mh/s, GPU2 0.000 Mh/s 10:09:01:593 1774 GPU 0 temp = 62, old fan speed = 32, new fan speed = 31
10:09:01:602 1774 GPU 1 temp = 63, old fan speed = 33, new fan speed = 32
10:09:01:611 1774 GPU 2 temp = 50, old fan speed = 0, new fan speed = 25
10:09:02:308 1534 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x371748c", "0x00000000000000000000000000000000000000000000000000000000923a31c8"]}
10:09:02:492 1534 got 40 bytes 10:09:02:492 1534 buf: {"id":6,"jsonrpc":"2.0","result":true}
10:09:02:508 1534 parse packet: 38 10:09:02:524 1534 new buf size: 0 10:09:03:454 1128 checked ETH share on CPU, spent 8ms 10:09:03:472 1128 ETH: put share nonce 738c0b40035de3e9 10:09:03:476 1128 ETH round found 1 shares 10:09:03:492 1534 ETH: 02/20/18-10:09:03 - SHARE FOUND - (GPU 0) 10:09:03:492 1534 send: {"id":10,"method":"eth_submitWork","params":["0x738c0b40035de3e9","0xbeb6b9a00de9db7e7692a5b5b4111a29c341e1936d816e77e1177f34a2df9ac8","0xe74c85291e01a2e73d96e5bda61beb7c551e8d9fa92e24b3e228b69589cc62c9"]}
10:09:03:670 1534 got 41 bytes 10:09:03:676 1534 buf: {"id":10,"jsonrpc":"2.0","result":true}
10:09:03:676 1534 parse packet: 39 10:09:03:692 1534 ETH: Share accepted (203 ms)!
10:09:03:708 1534 new buf size: 0 10:09:03:869 1534 got 244 bytes 10:09:03:876 1534 buf: {"result":["0xadfd4a2f48cb0c335f7c1045117e13298c26bf36070be9a84a9ecbe633e34d9f","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}
10:09:03:877 1534 parse packet: 242 10:09:03:877 1534 ETH: job changed 10:09:03:892 1534 new buf size: 0 10:09:03:892 1534 ETH: 02/20/18-10:09:03 - New job from eth-us.dwarfpool.com:8008 10:09:03:906 1534 target: 0x0000000225c17d04 (diff: 2000MH), epoch 170(2.33GB) 10:09:03:919 1534 ETH - Total Speed: 54.779 Mh/s, Total Shares: 467, Rejected: 0, Time: 03:06 10:09:03:923 1534 ETH: GPU0 25.873 Mh/s, GPU1 28.906 Mh/s, GPU2 0.000 Mh/s 10:09:04:656 1774 GPU 0 temp = 62, old fan speed = 31, new fan speed = 30
10:09:04:656 1774 GPU 1 temp = 63, old fan speed = 33, new fan speed = 32
10:09:04:677 1774 GPU 2 temp = 50, old fan speed = 0, new fan speed = 25
10:09:05:071 1534 got 244 bytes 10:09:05:078 1534 buf: {"result":["0x4d0a01524a69139c421c3c7e0f98e770062b2d6faa71976899250cb84f8954fe","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}
10:09:05:078 1534 parse packet: 242 10:09:05:093 1534 ETH: job changed 10:09:05:109 1534 new buf size: 0 10:09:05:125 1534 ETH: 02/20/18-10:09:05 - New job from eth-us.dwarfpool.com:8008 10:09:05:125 1534 target: 0x0000000225c17d04 (diff: 2000MH), epoch 170(2.33GB) 10:09:05:125 1534 ETH - Total Speed: 57.777 Mh/s, Total Shares: 467, Rejected: 0, Time: 03:06 10:09:05:140 1534 ETH: GPU0 28.874 Mh/s, GPU1 28.902 Mh/s, GPU2 0.000 Mh/s 10:09:05:681 174c em hbt: 15, fm hbt: 109, 10:09:05:681 174c watchdog - thread 0 (gpu0), hb time 203 10:09:05:696 174c watchdog - thread 1 (gpu0), hb time 63 10:09:05:696 174c watchdog - thread 2 (gpu1), hb time 78 10:09:05:712 174c watchdog - thread 3 (gpu1), hb time 234 10:09:05:712 174c watchdog - thread 4 (gpu2), hb time 73781 10:09:05:728 174c WATCHDOG: GPU 2 hangs in OpenCL call, exit 10:09:05:728 174c watchdog - thread 5 (gpu2), hb time 73969 10:09:05:743 174c WATCHDOG: GPU 2 hangs in OpenCL call, exit 10:09:05:759 174c GPU 0 temp = 62, old fan speed = 30, new fan speed = 29
10:09:05:759 174c GPU 1 temp = 63, old fan speed = 33, new fan speed = 32
10:09:05:775 174c GPU 2 temp = 50, old fan speed = 0, new fan speed = 25
10:09:05:900 174c Quit, please wait... 10:09:07:702 1774 GPU 0 temp = 56, old fan speed = 29, new fan speed = 25
10:09:07:717 1774 GPU 1 temp = 59, old fan speed = 34, new fan speed = 29
10:09:07:717 1774 GPU 2 temp = 50, old fan speed = 0, new fan speed = 25
10:09:16:800 174c Restarting OK, exit...
Help please....
|
|
|
|
adyspd
Newbie
Offline
Activity: 30
Merit: 0
|
|
February 20, 2018, 10:33:02 AM |
|
Hi blake2s dual miner's,
Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.
Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…
Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!
Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.
We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;
Have a nice day.
We can't stop blaming you, everyone needs to know the truth ! Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ). You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%. With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair. Thanks.
|
|
|
|
silvi0
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 20, 2018, 10:40:35 AM |
|
Hello Everyone! Could somebody help me to solve my isssu ? Ive got an headache trying to figure out this problem. In some time one of GPUs show 0 hashrate. CM trying to restart itself and no good. It repeats the same message over and over until i restart whole rig. https://imgur.com/a/j99nKGPUs are with modded bios. 10:09:05:728 174c WATCHDOG: GPU 2 hangs in OpenCL call, exit 10:09:05:743 174c WATCHDOG: GPU 2 hangs in OpenCL call, exit 10:09:16:800 174c Restarting OK, exit... Help please.... [/quote] GPU 2 hangs.. Detach that GPU and try if the problems are solved, after that reinstall that GPU (Modding and driver)
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
February 20, 2018, 10:41:26 AM |
|
Anyone successfully mining SHIELD (blake2s algo) coin? I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.
Did you mine other Blake2S successfully? If not, then the setting is not right. yes xvg on nlpool and antminepool.com works perfectly fine. It can't find anything wrong with the settings. most of the time the miner can't connect to the pool, especial with nlpool Doesn't matter which pool i try, i get this. Example B2S: Stratum - connecting to 'pool.bilbotel.fr' <54.36.252.117> port 5766 B2S: Stratum - Connected (pool.bilbotel.fr:5766) B2S: Authorization failed : (null) Socket was closed remotely (by pool) B2S: Job timeout, disconnect, retry in 20 sec...
|
|
|
|
krasent
Newbie
Offline
Activity: 18
Merit: 0
|
|
February 20, 2018, 10:53:09 AM |
|
Hi blake2s dual miner's,
Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.
Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…
Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!
Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.
We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;
Have a nice day.
We can't stop blaming you, everyone needs to know the truth ! Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ). You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%. With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair. Thanks. Confirm! for 24h nlpool paid much more than Unimining.
|
|
|
|
arnold_mad
Newbie
Offline
Activity: 64
Merit: 0
|
|
February 20, 2018, 11:22:20 AM |
|
problem for me is that nlpool is not stable atm - any clue when they will fix everything ? using antminer pool atm
|
|
|
|
munGoMine
Newbie
Offline
Activity: 8
Merit: 0
|
|
February 20, 2018, 11:35:59 AM |
|
Getting this error while running version 10.6 and can't figure out how to stop it:
03:36:40:155 1200 GPU 0 temp = 69, old fan speed = 50, new fan speed = 40
03:36:40:171 1200 GPU 1 temp = 68, old fan speed = 49, new fan speed = 40
03:36:40:186 1200 GPU 2 temp = 68, old fan speed = 55, new fan speed = 40
03:36:40:233 1200 GPU 3 temp = 72, old fan speed = 69, new fan speed = 58
03:36:40:249 1200 GPU 4 temp = 74, old fan speed = 63, new fan speed = 53
03:36:40:280 1200 GPU 5: got incorrect temperature 511, ignore 03:36:40:280 1200 GPU 6: got incorrect temperature 511, ignore
It shuts the miner down. I am running 7 Sapphire rx 480 8g cards with Windows 10, and I have not figured out what to do to get rid of it. May be the result of using a pcie splitter on the 6th slot, but I have 40 other machines just like it and none of them are doing it. Please share any experiences you have with this to give me some ideas. I have reinstalled the drivers 3 times (August 234d blockchain drivers) flashed the video cards' bios back to the original, and removed all control parameters from the miner. Looking for the "what else" I can try. Thanks.
I had the same error on one rig. Turned out it has burned my SATA cable in PSU connector. This SATA was powering two risers, thats why 2 GPUs were affected. After I replaced SATA cable it started working again, but it got burned again after a week, so I replaced the whole PSU - now its OK for 2 months.
|
|
|
|
Amkolino
Newbie
Offline
Activity: 42
Merit: 0
|
|
February 20, 2018, 11:37:02 AM |
|
Guys, what are you mining now with the new possibilities of Dual Mining by Claymores Miner?
Which coins goes best? Which coins do not lower the eth mining too much?
I liked eth/sia in the past very much - Others I was not liking (eth/dcr e.g.)
Let's say my rig has right now 220 mh/s.
What would be the impact with the new coins? With Sia it was like 217 mh/s and 2170 /s for Sia. I like that really :-)
Anyone already using new algorithms etc.? Which pool? which coin? whats your single eth speed and what dual speed eth + x ?
Thanks a lot and best regards!
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
February 20, 2018, 11:37:54 AM |
|
We can't stop blaming you, everyone needs to know the truth ! Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ). You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%. With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair.
Thanks.
There is no point telling a thief not to steal, the best thing is competition, if we get a good pool that pays honestly then those thieves will have to change their way cause if not then nobody will be mining in their pool.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
February 20, 2018, 12:08:35 PM |
|
Hello Everyone! Could somebody help me to solve my isssu ? Ive got an headache trying to figure out this problem. In some time one of GPUs show 0 hashrate. CM trying to restart itself and no good. It repeats the same message over and over until i restart whole rig. GPUs are with modded bios. 10:09:05:728 174c WATCHDOG: GPU 2 hangs in OpenCL call, exit 10:09:05:743 174c WATCHDOG: GPU 2 hangs in OpenCL call, exit 10:09:16:800 174c Restarting OK, exit... Help please.... GPU 2 hangs.. Detach that GPU and try if the problems are solved, after that reinstall that GPU (Modding and driver) [/quote] Well , thank you . Ill do it. But why CM cannot properly restart itself ?
|
|
|
|
Rulezz
Newbie
Offline
Activity: 6
Merit: 0
|
|
February 20, 2018, 12:21:40 PM |
|
We can't stop blaming you, everyone needs to know the truth ! Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ). You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%. With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair.
Thanks.
There is no point telling a thief not to steal, the best thing is competition, if we get a good pool that pays honestly then those thieves will have to change their way cause if not then nobody will be mining in their pool. unimining.net is ofcourse stealing miners, i recieve half of income with the same hashrate
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
February 20, 2018, 12:25:04 PM |
|
unimining.net is ofcourse stealing miners, i recieve half of income with the same hashrate
All of them are stealing, antminer, unimining, zcapool, nlpool and others on their own way.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
goodbitprofit
Newbie
Offline
Activity: 67
Merit: 0
|
|
February 20, 2018, 12:26:32 PM |
|
Guys, what are you mining now with the new possibilities of Dual Mining by Claymores Miner?
Which coins goes best? Which coins do not lower the eth mining too much?
I liked eth/sia in the past very much - Others I was not liking (eth/dcr e.g.)
Let's say my rig has right now 220 mh/s.
What would be the impact with the new coins? With Sia it was like 217 mh/s and 2170 /s for Sia. I like that really :-)
Anyone already using new algorithms etc.? Which pool? which coin? whats your single eth speed and what dual speed eth + x ?
Thanks a lot and best regards!
I was mine PASC few days a go, not that also forgot. One rig I use ETC and XVG, and on Second MUSIC and XVG. XVG have big problems with pools, so for Now Antimepool I am using, but it seems less profit for at least 30-50%
|
|
|
|
valev1
Newbie
Offline
Activity: 26
Merit: 0
|
|
February 20, 2018, 12:29:15 PM |
|
Guys, if you have problems with XVG pools, try ours :
-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal <WALLET_ADDRESS> -dpsw c=XVG
time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ...
|
|
|
|
Neu_Cinetico
Newbie
Offline
Activity: 46
Merit: 0
|
|
February 20, 2018, 12:36:53 PM |
|
Guys, if you have problems with XVG pools, try ours :
-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal <WALLET_ADDRESS> -dpsw c=XVG
time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ... Report if u get accept on OXO plz
|
|
|
|
krasent
Newbie
Offline
Activity: 18
Merit: 0
|
|
February 20, 2018, 12:40:11 PM |
|
Guys, if you have problems with XVG pools, try ours :
-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal <WALLET_ADDRESS> -dpsw c=XVG
time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ... http://mining.oxo.rs/site/mining - Orphan... Orphan.... Orphan.... Old song... new voice....
|
|
|
|
|