Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[antanaskkk]

Hashrate difference between private Claymore dual miner version and pubic dropped by 5% with 11.2 release. All who invested to private version of miner aren't very happy to see it.

[Claymore]

I often get PM with asking for some private versions. I added the answer to FAQ, with almost no success. So I have to say again and again:
I never had any private versions of any miner. Not a single one.
Any private versions of my miners are pure scam, they do not exist.

[Vann]

UPDATE: I improved support for systems with a lot of GPUs ( > 8 ) and slow CPU: less CPU load, EthMan works fine now. I will release new version within a few days, also some other improvements will be included.

Glad to here about the fix. I didn't know a Core i3 6100 is a slow CPU. With 13 RX 580's 8GB s on the ASRock H110 Pro BTC+ the load reported in Task Manager is ~35% I guess we need Core i7 to with 12+ GPU's in Windows.

[Bigdrago]

UPDATE: I improved support for systems with a lot of GPUs ( > 8 ) and slow CPU: less CPU load, EthMan works fine now. I will release new version within a few days, also some other improvements will be included.

Glad to here about the fix. I didn't know a Core i3 6100 is a slow CPU. I guess we need Core i7 to with 12+ GPU's in Windows.

Pentium g4560 on my 13 gpu systems is more than enough

[greatauror28]

Rig ran for 48 hrs with v11.2

Now its back to its frustrating bug that stop at pool/solo version and just hangs the whole rig.

Tried everything again from re-unzipping claymore compressed file, adding exceptions in Win Defender, making sure no trojan detected but to no avail.

Help! @claymore 

[auscrash]

Hi pals! What is the best amd driver for this version of claymore, what is your recommendation, kindly give me some of your thoughts.. Thanks

Running 18.2.1 on my rigs, not having any stability issues, others have reported 18.2.2 as working well also. I suspect any of the most recent drivers are fine as AMD have integrated the "block chain" optimised functionality into their drivers which is accessed by choosing "compute" instead of "graphics" in the settings

[antanaskkk]

I often get PM with asking for some private versions. I added the answer to FAQ, with almost no success. So I have to say again and again:
I never had any private versions of any miner. Not a single one.
Any private versions of my miners are pure scam, they do not exist.

Sorry, just trolling

[ganzocrypt]

Hi pals! What is the best amd driver for this version of claymore, what is your recommendation, kindly give me some of your thoughts.. Thanks

Running 18.2.1 on my rigs, not having any stability issues, others have reported 18.2.2 as working well also. I suspect any of the most recent drivers are fine as AMD have integrated the "block chain" optimised functionality into their drivers which is accessed by choosing "compute" instead of "graphics" in the settings

so the latest drivers include the blockchain fix using compute feature? do you have a link to this?

windows decides to install some amd drivers several times now and do not want to go the uninstall/install saga again if the latest drivers are good.
Thx

[Bigdrago]

Hi pals! What is the best amd driver for this version of claymore, what is your recommendation, kindly give me some of your thoughts.. Thanks

Running 18.2.1 on my rigs, not having any stability issues, others have reported 18.2.2 as working well also. I suspect any of the most recent drivers are fine as AMD have integrated the "block chain" optimised functionality into their drivers which is accessed by choosing "compute" instead of "graphics" in the settings

so the latest drivers include the blockchain fix using compute feature? do you have a link to this?

windows decides to install some amd drivers several times now and do not want to go the uninstall/install saga again if the latest drivers are good.
Thx

Yes they have since august. I'm using 18.3.1

[auscrash]

Hi pals! What is the best amd driver for this version of claymore, what is your recommendation, kindly give me some of your thoughts.. Thanks

Running 18.2.1 on my rigs, not having any stability issues, others have reported 18.2.2 as working well also. I suspect any of the most recent drivers are fine as AMD have integrated the "block chain" optimised functionality into their drivers which is accessed by choosing "compute" instead of "graphics" in the settings

so the latest drivers include the blockchain fix using compute feature? do you have a link to this?

windows decides to install some amd drivers several times now and do not want to go the uninstall/install saga again if the latest drivers are good.
Thx

Here's the AMD support page on how to select compute for blockchain mining, as Bidrago above said, its been there in all the AMD driver releases for a while now

https://support.amd.com/en-us/kb-articles/Pages/DH-024.aspx

[Teress]

Just a cosmetic but driving me crazy. Hitting "s" key to display more info. All AMD cards are listed nicelly row by row, but NVIDIA cards are listed with one emty row between them - annoying. Can you Claymore please display NV cards the same as AMDs? Thanks a lot...

[gmourani]

Version 11.2 doesn't run on CentOS 7 and return a missing libssl-1.0.0 even if not linked with openssl! CentOS 7 have openssl version 1.0.2k installed. Some one run claymore 11.2 on Linux with newer openssl ?

[ivanpop]

UPDATE: I improved support for systems with a lot of GPUs ( > 8 ) and slow CPU: less CPU load, EthMan works fine now. I will release new version within a few days, also some other improvements will be included.

You need to make this miner multithreaded. The CPU's have plenty of power but you're using only one core. The miner can't make use of the 2nd, 3rd, 4th.... etc. cores.

[bulgar73]

Rig ran for 48 hrs with v11.2

Now its back to its frustrating bug that stop at pool/solo version and just hangs the whole rig.

Tried everything again from re-unzipping claymore compressed file, adding exceptions in Win Defender, making sure no trojan detected but to no avail.

Help! @claymore 

I have the same problem with one of my rigs from friday.
driver reinstall - nothing
do windows update - nothing
change driver version, 4 different, - nothing
rig always hang.

then I try GPU testing one by one and I found problems with GPU1. GPU work, installed driver, graphics output works but when I try to mine with Claymore or other miner soft, rig freeze, only reset.

So I run rig without this faulty GPU and all work OK now.

Tomorrow I try BIOS reflash and see...

[Munka9]

Hi claymore

Can I request a feature that detects a corrupt dag file (e.g. 3 incorrect shares in a row on a single GPU) and then purges and recreates the dag file from scratch? Ideally just on the GPU getting the incorrect shares if that's possible?

It's rare but every now and then one of my GPU starts getting 100% incorrect shares and needs a restart. The program doesn't detect this as an error so takes no action.

[whitrzac]

Had a really odd one today.

All of the miners at a specific location switched to no devfee mining by themselves.

Between me and a friend we have 15+ rigs here, running different versions of claymore eth. Mine are all on 11.1, his are a mix of 10 and 11.
Network has a failover in case the main internet goes down.

Rigs at 2 other locations didn't have any issues.

Any ideas on WTF actually happened?

[user1988]

UPDATE: I improved support for systems with a lot of GPUs ( > 8 ) and slow CPU: less CPU load, EthMan works fine now. I will release new version within a few days, also some other improvements will be included.

Great, I hope you included fix for fan control issue wherein fan controls are not accurate.

OS: Win 10 1709
Driver: Adrenalin Dec Update
GPU: Spahhire Nitro+ RX570 and Powercolor Red Devil RX570

example:
-tt -60, fan is not on 60% but +/- 10%, therefore ~70

the same with fanmin and fanmax, they are above/off desired settings.

friend you could solve the problem of the fans
I have been several days and I can not configure the fans in fixed speed

[greatauror28]

Rig ran for 48 hrs with v11.2

Now its back to its frustrating bug that stop at pool/solo version and just hangs the whole rig.

Tried everything again from re-unzipping claymore compressed file, adding exceptions in Win Defender, making sure no trojan detected but to no avail.

Help! @claymore 

I have the same problem with one of my rigs from friday.
driver reinstall - nothing
do windows update - nothing
change driver version, 4 different, - nothing
rig always hang.

then I try GPU testing one by one and I found problems with GPU1. GPU work, installed driver, graphics output works but when I try to mine with Claymore or other miner soft, rig freeze, only reset.

So I run rig without this faulty GPU and all work OK now.

Tomorrow I try BIOS reflash and see...

For this issue I was able to resolve it by upgrading to 18.3.1 AMD driver although my cards (gigabyte gaming 570) that used to hash 29 to 29.6 are now down to 28.3Mh - I wonder what happened. But at least they aren't hanging now and happily mining.

This is for a guy anyway - I only tweaked it for him (bios mod, windows install, test).

[Claymore]

Version 11.2 doesn't run on CentOS 7 and return a missing libssl-1.0.0 even if not linked with openssl! CentOS 7 have openssl version 1.0.2k installed. Some one run claymore 11.2 on Linux with newer openssl ?

It works fine on Ubuntu 14.04 and 16.04, probably you should create a link to your openssl version.

UPDATE: I improved support for systems with a lot of GPUs ( > 8 ) and slow CPU: less CPU load, EthMan works fine now. I will release new version within a few days, also some other improvements will be included.

Great, I hope you included fix for fan control issue wherein fan controls are not accurate.

OS: Win 10 1709
Driver: Adrenalin Dec Update
GPU: Spahhire Nitro+ RX570 and Powercolor Red Devil RX570

example:
-tt -60, fan is not on 60% but +/- 10%, therefore ~70

the same with fanmin and fanmax, they are above/off desired settings.

Please read: https://bitcointalk.org/index.php?topic=1433925.msg20538901#msg20538901
AfterBurner has same problem. For example, set 50% fan in AB, then open WattMan and see fan speed, the circle graph will display more than 50%.

[kostepanych2]

Hi,

Using this miner with old R9 280x in single mode.

When I mine altcoins I get 20 mh.
But when I mine Etherium I get only 10 mh.

Why???