|
|
marousi
Newbie
 Offline
Activity: 123
Merit: 0
|
 |
January 20, 2018, 07:43:15 AM |
|
I also discovered that the powered usb hubs cannot be daisy chained. They must be plugged directly into the PC's usb ports.
|
|
|
|
|
|
der_wasi
|
|
January 20, 2018, 12:02:55 PM |
|
So I just purchased my first 2Pac miner, plugged it in and...nothing. The LED on the back of the miner is green and the OS recognizes the device but it will not work with cgminer or BGMiner.
The 1st thing I tried was purchasing a couple of powered hubs, both with output over 2.1a per port, and then I bought a HighRock cable. Still nothing! :-(
When running cgminer->USB management->L
Bus 1 Device 10 ID: 10c4:ea60 GekkoScience 2Pac BM1384 Bitcoin Miner inactive.
Some specifics:
OS: Linux Mint 18.3 Cinnamon(3.6.7) 64 bit(fresh install)
CGMiner: v 4.10.8(fresh compile)
cmd line: ./cgminer -o {stuff} -u {myuserid} -p {gibberish} --gekko-2pac-freq 150
Any suggestions on things that I should try?
Thanks in advance!
On what positition is your voltage pot? There´s a flat side. Try turning it to 1 or 2 o´clock. 2.1 A is not very much. But usuallly it should start mining a little bit until it goes zombie. And better start with 100 MHz. If that works you can increase. If that all doesn´t work try raspbian os with the exact commands from post #1. I´m not sure what llinux mint is built on. With a debian distribution like raspbian it definitely works. |
|
|
|
a_troll_01
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 20, 2018, 01:23:49 PM |
|
I had that as my original installation, including the zadig.akeo.ie USB driver utility, but I couldn't get it to work. I read a post saying that if you are having issues switch to Linux which is what I did. |
|
|
|
|
a_troll_01
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 20, 2018, 01:33:41 PM |
|
So I just purchased my first 2Pac miner, plugged it in and...nothing. The LED on the back of the miner is green and the OS recognizes the device but it will not work with cgminer or BGMiner.
The 1st thing I tried was purchasing a couple of powered hubs, both with output over 2.1a per port, and then I bought a HighRock cable. Still nothing! :-(
When running cgminer->USB management->L
Bus 1 Device 10 ID: 10c4:ea60 GekkoScience 2Pac BM1384 Bitcoin Miner inactive.
Some specifics:
OS: Linux Mint 18.3 Cinnamon(3.6.7) 64 bit(fresh install)
CGMiner: v 4.10.8(fresh compile)
cmd line: ./cgminer -o {stuff} -u {myuserid} -p {gibberish} --gekko-2pac-freq 150
Any suggestions on things that I should try?
Thanks in advance!
On what positition is your voltage pot? There´s a flat side. Try turning it to 1 or 2 o´clock. 2.1 A is not very much. But usuallly it should start mining a little bit until it goes zombie. And better start with 100 MHz. If that works you can increase. If that all doesn´t work try raspbian os with the exact commands from post #1. I´m not sure what llinux mint is built on. With a debian distribution like raspbian it definitely works. My voltage pot? I'm not really sure how to determine that voltage setting but I assume it's whatever the factory default is. |
|
|
|
|
|
der_wasi
|
|
January 20, 2018, 02:01:22 PM |
|
Like I said, it has a flat side. This side schould be set to about 3 o`clock. You can try turning it counter clockwise to 2 or 1 o´clock.
But I think the problem is your os. If you are mining on a raspberry pi, then use raspbian. There is a discription for that on post #1. Otherwise use ubuntu. There´s a discription, too. And use all commands exactly like written there. And of course use cgminer from the git folder on post #1 either.
|
|
|
|
paulus59
Newbie
Offline
Activity: 231
Merit: 0
|
|
January 20, 2018, 02:22:08 PM
Last edit: January 20, 2018, 02:39:29 PM by paulus59 |
|
hello guys i have also some troubles here, first i read the whole post 1 , installed the latest cgminer windows version 4.10.0 installed zadig windows driver and installation went oke, i see my 2 pac, now in cg miner i use this line -> cgminer.exe -o stratum+tcp://eu.multipool.us:3337 -u kripau.1 -p x without the freq settings like : --gekko-2pac-freq 150 si it is just standard but wen i start the miner all i see is this : http://i63.tinypic.com/zmf9xu.jpgand the cursus is just blinking upper left corner i dont get any accepted? , what i see by others here on the forum posts i have a powered hub 3 amp plus cooler green light at the back of the 2 pac and sometimes flickering could some one point me to the direction pls [edit] after some time i let cgminer run i see this : Accepted 0ccd5c51 Diff 5.12K/2048 BSD 0so i see now 1 accepted is that correct ? that should go faster or do i miss here some things in settings ? ;-) |
|
|
|
|
|
vh (OP)
|
|
January 20, 2018, 03:14:51 PM |
|
[edit]
after some time i let cgminer run i see this : Accepted 0ccd5c51 Diff 5.12K/2048 BSD 0
so i see now 1 accepted is that correct ? that should go faster or do i miss here some things in settings ? ;-)
Most pools use manual and variable difficulty settings per worker. Sounds like this pools start off at 2048 for the miner. If there is a manual setting on the interface, you can set the worker to their lowest value or about 32-ish. With vardiff, the pool will sense the gap between your accepted shares and adjust it over time. It doesn't make much difference mathematically since that 5120(5.12K) share there is like a 160 x 32 diff shares. You just get to see the Accepted message more often. |
|
|
|
lok8nusa
Member
Offline
Activity: 254
Merit: 11
Call 811 before you dig
|
|
January 20, 2018, 03:15:14 PM |
|
so i see now 1 accepted is that correct ? that should go faster or do i miss here some things in settings ? ;-)
You successfully started your miner with cgminer's default settings. That's what the screen output looks like. Congratulations, and keep on mining! Edit: Of course, now that it runs, you may want to experiment with various command-line settings or hardware adjustments (voltage). All that info is in this forum, too. Have fun! |
Coining bits since 2017 Kano Pool is the BEST BTC mining pool. |
|
|
marousi
Newbie
Offline
Activity: 123
Merit: 0
|
|
January 20, 2018, 03:25:56 PM |
|
what does the "white light" mean on the 2pac? Burned out?
|
|
|
|
|
paulus59
Newbie
Offline
Activity: 231
Merit: 0
|
|
January 20, 2018, 06:35:36 PM |
|
[edit]
after some time i let cgminer run i see this : Accepted 0ccd5c51 Diff 5.12K/2048 BSD 0
so i see now 1 accepted is that correct ? that should go faster or do i miss here some things in settings ? ;-)
Most pools use manual and variable difficulty settings per worker. Sounds like this pools start off at 2048 for the miner. If there is a manual setting on the interface, you can set the worker to their lowest value or about 32-ish. With vardiff, the pool will sense the gap between your accepted shares and adjust it over time. It doesn't make much difference mathematically since that 5120(5.12K) share there is like a 160 x 32 diff shares. You just get to see the Accepted message more often. thank you for explanation , it is clear for me , i let it run for some time now about 2 ours at 150 mhz i did not alter the voltage on the 2pac after 2 ours i get 8 hw errors in cgminer , not bad right ? sample screenshot after 2 ours running cgminer : BSD 10014510: COMPAC-2 150.00MHz HW:10 | 14.38G / 16.58Gh/s WU:231.2/m btw what is the green / white light on the 2 pac ? |
|
|
|
|
sidehack
Legendary
Offline
Activity: 3402
Merit: 1864
Curmudgeonly hardware guy
|
|
January 20, 2018, 07:02:52 PM |
|
When testing, I try to shoot for fewer than 2 HW per hour at 100MHz and stock voltage. That's just my own standard for what I'm willing to ship. 4 an hour at 150MHz isn't bad. I forget the formula offhand for figuring percent errors, but as long as your hashrate is about what's expected you probably won't have any trouble.
The green light is tied directly to 5V. Basically just tells you the thing's getting power. The white is linked into the comm lines and flashes every time the chips respond with a nonce. So flashing means it's hashing away. Solid white generally indicates one of your chips is hosed up.
|
|
|
|
paulus59
Newbie
Offline
Activity: 231
Merit: 0
|
|
January 20, 2018, 07:18:22 PM |
|
When testing, I try to shoot for fewer than 2 HW per hour at 100MHz and stock voltage. That's just my own standard for what I'm willing to ship. 4 an hour at 150MHz isn't bad. I forget the formula offhand for figuring percent errors, but as long as your hashrate is about what's expected you probably won't have any trouble.
The green light is tied directly to 5V. Basically just tells you the thing's getting power. The white is linked into the comm lines and flashes every time the chips respond with a nonce. So flashing means it's hashing away. Solid white generally indicates one of your chips is hosed up.
thank you for this info ! ;-) |
|
|
|
|
DeeMiner
Newbie
Offline
Activity: 5
Merit: 1
|
|
January 21, 2018, 01:59:59 AM |
|
Trying to get cgminer working on a Rock64 running Diet Pi. Getting stuck when trying to run: CFLAGS="-02" ./autogen.sh --enable-geko Checking config.log gave me: This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by cgminer configure 4.10.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ /root/git/vthoang/cgminer/configure --enable-gekko
## --------- ##
## Platform. ##
## --------- ##
hostname = DietPi
uname -m = aarch64
uname -r = 4.4.77-rockchip-ayufan-118
uname -s = Linux
uname -v = #1 SMP Thu Sep 14 21:59:24 UTC 2017
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2910: checking build system type
configure:2924: result: aarch64-unknown-linux-gnu
configure:2944: checking host system type
configure:2957: result: aarch64-unknown-linux-gnu
configure:2977: checking target system type
configure:2990: result: aarch64-unknown-linux-gnu
configure:3038: checking for a BSD-compatible install
configure:3106: result: /usr/bin/install -c
configure:3117: checking whether build environment is sane
configure:3172: result: yes
configure:3323: checking for a thread-safe mkdir -p
configure:3362: result: /bin/mkdir -p
configure:3370: checking for gawk
configure:3400: result: no
configure:3370: checking for mawk
configure:3386: found /usr/bin/mawk
configure:3397: result: mawk
configure:3408: checking whether make sets $(MAKE)
configure:3430: result: yes
configure:3459: checking whether make supports nested variables
configure:3476: result: yes
configure:3613: checking whether make supports nested variables
configure:3630: result: yes
configure:3653: checking for style of include used by make
configure:3681: result: GNU
configure:3752: checking for gcc
configure:3768: found /usr/bin/gcc
configure:3779: result: gcc
configure:4008: checking for C compiler version
configure:4017: gcc --version >&5
gcc (Debian 6.3.0-18) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4028: $? = 0
configure:4017: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/aarch64-linux-gnu/6/lto-wrapper
Target: aarch64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 6.3.0-18' --with-bugurl=file:///usr/share/doc/gcc-6/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-6 --program-prefix=aarch64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-libquadmath --enable-plugin --enable-default-pie --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-6-arm64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-6-arm64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-6-arm64 --with-arch-directory=aarch64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-multiarch --enable-fix-cortex-a53-843419 --enable-checking=release --build=aarch64-linux-gnu --host=aarch64-linux-gnu --target=aarch64-linux-gnu
Thread model: posix
gcc version 6.3.0 20170516 (Debian 6.3.0-18)
configure:4028: $? = 0
configure:4017: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:4028: $? = 1
configure:4017: gcc -qversion >&5
gcc: error: unrecognized command line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:4028: $? = 1
configure:4048: checking whether the C compiler works
configure:4070: gcc -02 conftest.c >&5
gcc: error: unrecognized command line option '-02'
configure:4074: $? = 1
configure:4112: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cgminer"
| #define PACKAGE_TARNAME "cgminer"
| #define PACKAGE_VERSION "4.10.0"
| #define PACKAGE_STRING "cgminer 4.10.0"
| #define PACKAGE_BUGREPORT "kernel@kolivas.org"
| #define PACKAGE_URL ""
| #define PACKAGE "cgminer"
| #define VERSION "4.10.0"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:4117: error: in `/root/git/vthoang/cgminer':
configure:4119: error: C compiler cannot create executables
See `config.log' for more details
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=aarch64-unknown-linux-gnu
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value=-02
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_JANSSON_CFLAGS_set=
ac_cv_env_JANSSON_CFLAGS_value=
ac_cv_env_JANSSON_LIBS_set=
ac_cv_env_JANSSON_LIBS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBCURL_CFLAGS_set=
ac_cv_env_LIBCURL_CFLAGS_value=
ac_cv_env_LIBCURL_LIBS_set=
ac_cv_env_LIBCURL_LIBS_value=
ac_cv_env_LIBSYSTEMD_CFLAGS_set=
ac_cv_env_LIBSYSTEMD_CFLAGS_value=
ac_cv_env_LIBSYSTEMD_LIBS_set=
ac_cv_env_LIBSYSTEMD_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LIBUSB_CFLAGS_set=
ac_cv_env_LIBUSB_CFLAGS_value=
ac_cv_env_LIBUSB_LIBS_set=
ac_cv_env_LIBUSB_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=aarch64-unknown-linux-gnu
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=mawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
ac_cv_target=aarch64-unknown-linux-gnu
am_cv_make_support_nested_variables=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /root/git/vthoang/cgminer/missing aclocal-1.15'
ALLOCA=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='0'
AM_V='$(V)'
APPLE_UNIVERSAL_BUILD=''
AUTOCONF='${SHELL} /root/git/vthoang/cgminer/missing autoconf'
AUTOHEADER='${SHELL} /root/git/vthoang/cgminer/missing autoheader'
AUTOMAKE='${SHELL} /root/git/vthoang/cgminer/missing automake-1.15'
AWK='mawk'
BITSIZEOF_PTRDIFF_T=''
BITSIZEOF_SIG_ATOMIC_T=''
BITSIZEOF_SIZE_T=''
BITSIZEOF_WCHAR_T=''
BITSIZEOF_WINT_T=''
CC='gcc'
CCDEPMODE=''
CFLAGS='-02'
CPP=''
CPPFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLOPEN_FLAGS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GL_COND_LIBTOOL_FALSE=''
GL_COND_LIBTOOL_TRUE=''
GL_GENERATE_STDDEF_H_FALSE=''
GL_GENERATE_STDDEF_H_TRUE=''
GL_GENERATE_STDINT_H_FALSE=''
GL_GENERATE_STDINT_H_TRUE=''
GNULIB_MBSCASECMP=''
GNULIB_MBSCASESTR=''
GNULIB_MBSCHR=''
GNULIB_MBSCSPN=''
GNULIB_MBSLEN=''
GNULIB_MBSNCASECMP=''
GNULIB_MBSNLEN=''
GNULIB_MBSPBRK=''
GNULIB_MBSPCASECMP=''
GNULIB_MBSRCHR=''
GNULIB_MBSSEP=''
GNULIB_MBSSPN=''
GNULIB_MBSSTR=''
GNULIB_MBSTOK_R=''
GNULIB_MEMCHR=''
GNULIB_MEMMEM=''
GNULIB_MEMPCPY=''
GNULIB_MEMRCHR=''
GNULIB_RAWMEMCHR=''
GNULIB_SIGACTION=''
GNULIB_SIGNAL_H_SIGPIPE=''
GNULIB_SIGPROCMASK=''
GNULIB_STPCPY=''
GNULIB_STPNCPY=''
GNULIB_STRCASESTR=''
GNULIB_STRCHRNUL=''
GNULIB_STRDUP=''
GNULIB_STRERROR=''
GNULIB_STRERROR_R=''
GNULIB_STRNCAT=''
GNULIB_STRNDUP=''
GNULIB_STRNLEN=''
GNULIB_STRPBRK=''
GNULIB_STRSEP=''
GNULIB_STRSIGNAL=''
GNULIB_STRSTR=''
GNULIB_STRTOK_R=''
GNULIB_STRVERSCMP=''
GREP=''
HAS_ANT_S1_FALSE=''
HAS_ANT_S1_TRUE=''
HAS_ANT_S2_FALSE=''
HAS_ANT_S2_TRUE=''
HAS_ANT_S3_FALSE=''
HAS_ANT_S3_TRUE=''
HAS_AVALON2_FALSE=''
HAS_AVALON2_TRUE=''
HAS_AVALON4_FALSE=''
HAS_AVALON4_TRUE=''
HAS_AVALON7_FALSE=''
HAS_AVALON7_TRUE=''
HAS_AVALON_FALSE=''
HAS_AVALON_MINER_FALSE=''
HAS_AVALON_MINER_TRUE=''
HAS_AVALON_TRUE=''
HAS_BAB_FALSE=''
HAS_BAB_TRUE=''
HAS_BFLSC_FALSE=''
HAS_BFLSC_TRUE=''
HAS_BITFORCE_FALSE=''
HAS_BITFORCE_TRUE=''
HAS_BITFURY16_FALSE=''
HAS_BITFURY16_TRUE=''
HAS_BITFURY_FALSE=''
HAS_BITFURY_TRUE=''
HAS_BITMINE_A1_FALSE=''
HAS_BITMINE_A1_TRUE=''
HAS_BLOCKERUPTER_FALSE=''
HAS_BLOCKERUPTER_TRUE=''
HAS_COINTERRA_FALSE=''
HAS_COINTERRA_TRUE=''
HAS_DRILLBIT_FALSE=''
HAS_DRILLBIT_TRUE=''
HAS_GEKKO_FALSE=''
HAS_GEKKO_TRUE=''
HAS_HASHFAST_FALSE=''
HAS_HASHFAST_TRUE=''
HAS_HASHRATIO_FALSE=''
HAS_HASHRATIO_TRUE=''
HAS_ICARUS_FALSE=''
HAS_ICARUS_TRUE=''
HAS_KLONDIKE_FALSE=''
HAS_KLONDIKE_TRUE=''
HAS_KNC_FALSE=''
HAS_KNC_TRUE=''
HAS_MINION_FALSE=''
HAS_MINION_TRUE=''
HAS_MODMINER_FALSE=''
HAS_MODMINER_TRUE=''
HAS_SP10_FALSE=''
HAS_SP10_TRUE=''
HAS_SP30_FALSE=''
HAS_SP30_TRUE=''
HAVE_CURSES_FALSE=''
HAVE_CURSES_TRUE=''
HAVE_DECL_MEMMEM=''
HAVE_DECL_MEMRCHR=''
HAVE_DECL_STRDUP=''
HAVE_DECL_STRERROR_R=''
HAVE_DECL_STRNDUP=''
HAVE_DECL_STRNLEN=''
HAVE_DECL_STRSIGNAL=''
HAVE_DECL_STRTOK_R=''
HAVE_INTTYPES_H=''
HAVE_LONG_LONG_INT=''
HAVE_MBSLEN=''
HAVE_MEMCHR=''
HAVE_MEMPCPY=''
HAVE_POSIX_SIGNALBLOCKING=''
HAVE_RAWMEMCHR=''
HAVE_SIGACTION=''
HAVE_SIGHANDLER_T=''
HAVE_SIGINFO_T=''
HAVE_SIGNED_SIG_ATOMIC_T=''
HAVE_SIGNED_WCHAR_T=''
HAVE_SIGNED_WINT_T=''
HAVE_SIGSET_T=''
HAVE_STDINT_H=''
HAVE_STPCPY=''
HAVE_STPNCPY=''
HAVE_STRCASESTR=''
HAVE_STRCHRNUL=''
HAVE_STRPBRK=''
HAVE_STRSEP=''
HAVE_STRUCT_SIGACTION_SA_SIGACTION=''
HAVE_STRVERSCMP=''
HAVE_SYS_BITYPES_H=''
HAVE_SYS_INTTYPES_H=''
HAVE_SYS_TYPES_H=''
HAVE_TYPE_VOLATILE_SIG_ATOMIC_T=''
HAVE_UNSIGNED_LONG_LONG_INT=''
HAVE_WCHAR_H=''
HAVE_WCHAR_T=''
HAVE_WINDOWS_FALSE=''
HAVE_WINDOWS_TRUE=''
HAVE_x86_64_FALSE=''
HAVE_x86_64_TRUE=''
INCLUDE_NEXT=''
INCLUDE_NEXT_AS_FIRST_DIRECTIVE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
JANSSON_CFLAGS=''
JANSSON_LIBS=''
LDFLAGS=''
LIBCURL_CFLAGS=''
LIBCURL_LIBS=''
LIBGNU_LIBDEPS=''
LIBGNU_LTLIBDEPS=''
LIBOBJS=''
LIBS=''
LIBSYSTEMD_CFLAGS=''
LIBSYSTEMD_LIBS=''
LIBUSB_CFLAGS=''
LIBUSB_LIBS=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /root/git/vthoang/cgminer/missing makeinfo'
MATH_LIBS=''
MKDIR_P='/bin/mkdir -p'
MM_LIBS=''
NCURSES_LIBS=''
NEED_FPGAUTILS_FALSE=''
NEED_FPGAUTILS_TRUE=''
NEED_I2C_CONTEXT_FALSE=''
NEED_I2C_CONTEXT_TRUE=''
NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H=''
NEXT_AS_FIRST_DIRECTIVE_STDDEF_H=''
NEXT_AS_FIRST_DIRECTIVE_STDINT_H=''
NEXT_AS_FIRST_DIRECTIVE_STRING_H=''
NEXT_SIGNAL_H=''
NEXT_STDDEF_H=''
NEXT_STDINT_H=''
NEXT_STRING_H=''
OBJEXT=''
PACKAGE='cgminer'
PACKAGE_BUGREPORT='kernel@kolivas.org'
PACKAGE_NAME='cgminer'
PACKAGE_STRING='cgminer 4.10.0'
PACKAGE_TARNAME='cgminer'
PACKAGE_URL=''
PACKAGE_VERSION='4.10.0'
PATH_SEPARATOR=':'
PDCURSES_LIBS=''
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
PRAGMA_COLUMNS=''
PRAGMA_SYSTEM_HEADER=''
PTHREAD_FLAGS=''
PTHREAD_LIBS=''
PTRDIFF_T_SUFFIX=''
RANLIB=''
REPLACE_MEMCHR=''
REPLACE_MEMMEM=''
REPLACE_NULL=''
REPLACE_STPNCPY=''
REPLACE_STRCASESTR=''
REPLACE_STRCHRNUL=''
REPLACE_STRDUP=''
REPLACE_STRERROR=''
REPLACE_STRERROR_R=''
REPLACE_STRNCAT=''
REPLACE_STRNDUP=''
REPLACE_STRNLEN=''
REPLACE_STRSIGNAL=''
REPLACE_STRSTR=''
REPLACE_STRTOK_R=''
RT_LIBS=''
SET_MAKE=''
SHELL='/bin/bash'
SIG_ATOMIC_T_SUFFIX=''
SIZE_T_SUFFIX=''
STATIC_CURL_FALSE=''
STATIC_CURL_TRUE=''
STDDEF_H=''
STDINT_H=''
STRIP=''
UNDEFINE_STRTOK_R=''
VERSION='4.10.0'
VMAJ=''
WANT_CRC16_FALSE=''
WANT_CRC16_TRUE=''
WANT_LIBBITFURY_FALSE=''
WANT_LIBBITFURY_TRUE=''
WANT_STATIC_JANSSON_FALSE=''
WANT_STATIC_JANSSON_TRUE=''
WANT_USBUTILS_FALSE=''
WANT_USBUTILS_TRUE=''
WCHAR_T_SUFFIX=''
WINT_T_SUFFIX=''
WS2_LIBS=''
ac_ct_CC='gcc'
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='aarch64-unknown-linux-gnu'
build_alias=''
build_cpu='aarch64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
gl_LIBOBJS=''
gl_LTLIBOBJS=''
gltests_LIBOBJS=''
gltests_LTLIBOBJS=''
gltests_WITNESS=''
host='aarch64-unknown-linux-gnu'
host_alias=''
host_cpu='aarch64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /root/git/vthoang/cgminer/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
release_info=''
runstatedir='${localstatedir}/run'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=''
sysconfdir='${prefix}/etc'
target='aarch64-unknown-linux-gnu'
target_alias=''
target_cpu='aarch64'
target_os='linux-gnu'
target_vendor='unknown'
version_info=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "cgminer"
#define PACKAGE_TARNAME "cgminer"
#define PACKAGE_VERSION "4.10.0"
#define PACKAGE_STRING "cgminer 4.10.0"
#define PACKAGE_BUGREPORT "kernel@kolivas.org"
#define PACKAGE_URL ""
#define PACKAGE "cgminer"
#define VERSION "4.10.0"
configure: exit 77
I'm quite noob so I don't really understand why I'm stuck. May try a new OS later. Any help/input is appreciated |
|
|
|
|
sidehack
Legendary
Offline
Activity: 3402
Merit: 1864
Curmudgeonly hardware guy
|
|
January 21, 2018, 02:08:11 AM |
|
gcc: error: unrecognized command line option '-02' I'm gonna guess... Just making sure it's being read correctly, the "-O2" is dash oh two, not dash zero two.
|
|
|
|
DeeMiner
Newbie
Offline
Activity: 5
Merit: 1
|
|
January 21, 2018, 03:13:22 AM |
|
That would be it, apparently need to go back and work on my abc's and 123's.
Thanks for the help !
|
|
|
|
|
sidehack
Legendary
Offline
Activity: 3402
Merit: 1864
Curmudgeonly hardware guy
|
|
January 21, 2018, 03:19:16 AM |
|
Yeah it's pretty common and easy to miss. I still make that error myself on occasion.
|
|
|
|
paulus59
Newbie
Offline
Activity: 231
Merit: 0
|
|
January 22, 2018, 08:33:16 AM
Last edit: January 22, 2018, 08:51:24 AM by paulus59 |
|
hey guys, litle update on my 2 pac the black one , europe following is just as it arrived, without any adjustments made : running now 1 1/2 day on 112.50 mhz at 12.15Ghz without errors, look here http://i65.tinypic.com/2qjw09s.jpg with this settings : cgminer -o stratum+tcp://eu.multipool.us:3343 -u myusername -p x --suggest-diff 32 --gekko-2pac-freq 110 today i am want to adjust the voltage, how do i do that ? very little turning the voltage on the 2pac ? btw after some resource and checking my USB devices and versions i saw that this 2pac is : USB Version Supported: 1.10 USB Device Speed: USB 1.1 Full-speed i tough that this would be minimal v2.0 or even usb v3.0 , how ever, could i get some direction points how to set the voltage ;-) thanks in advanced |
|
|
|
|
marousi
Newbie
Offline
Activity: 123
Merit: 0
|
|
January 22, 2018, 09:20:37 AM |
|
The screw has a flat edge, turn clockwise until the flat edge is at 1-2 oclock
|
|
|
|
|
paulus59
Newbie
Offline
Activity: 231
Merit: 0
|
|
January 22, 2018, 09:50:09 AM |
|
The screw has a flat edge, turn clockwise until the flat edge is at 1-2 oclock
that would be a half turn to get to 1 or 2 oclock becouse my screw is lower left corner wen you kept the stick up |
|
|
|
|
|
