1adam12
Newbie
 Offline
Activity: 2
Merit: 0
|
 |
November 25, 2020, 08:57:22 PM |
|
My hashrate is stuck at zero. I've tried running on 5.0e instead and get the same results. Ran DDU which did not change results either. Any advice? OpenCL driver version: 19.6.2/3
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU2: AMD Radeon (TM) R9 380 Series (pcie  , OpenCL 2.0, 4 GB VRAM, 28 CUs
GPU3: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU4: Radeon (TM) RX 480 Graphics (pcie 11), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU6: Radeon (TM) RX 480 Graphics (pcie 13), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon (TM) RX 480 Graphics (pcie 15), OpenCL 2.0, 4 GB VRAM, 36 CUs
Eth: Loading pools from epools.txt
Eth: the pool list contains 6 pools (1 from command-line)
Eth: primary pool: eth-eu2.nanopool.org:9999
Starting GPU mining
GPU1: AMD driver 19.20
GPU2: AMD driver 19.20
GPU3: AMD driver 19.20
GPU4: AMD driver 19.20
GPU5: AMD driver 19.20
GPU6: AMD driver 19.20
GPU7: AMD driver 19.20
Eth: Connecting to ethash pool eth-eu2.nanopool.org:9999 (proto: EthProxy)
GPU1: 31C 0% 4W, GPU2: 35C 0%, GPU3: 35C 0% 4W, GPU4: 39C 0% 8W, GPU5: 34C 0% 7W, GPU6: 34C 0% 9W, GPU7: 37C 0% 8W
GPUs power: 40.1 W
Eth: Connected to ethash pool eth-eu2.nanopool.org:9999 (51.15.55.162)
Eth: New job #9de18436 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #377
GPU2: Starting up... (0)
GPU3: Starting up... (0)
GPU4: Starting up... (0)
GPU5: Starting up... (0)
GPU6: Starting up... (0)
GPU7: Starting up... (0)
Eth: New job #78bfae07 from eth-eu2.nanopool.org:9999; diff: 10000MH
Eth: New job #051aafc9 from eth-eu2.nanopool.org:9999; diff: 10000MH
Eth: New job #0b3df98d from eth-eu2.nanopool.org:9999; diff: 10000MH
Light cache generated in 3.8 s (16.6 MB/s)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0)
GPU2: Free VRAM: 3.951 GB; used: 0.049 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #377 (3.95) GB
GPU2: Generating DAG for epoch #377
Eth: New job #5be64e37 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU3: Free VRAM: 3.951 GB; used: 0.049 GB
GPU3: Disabling DAG pre-allocation (not enough VRAM)
GPU3: Allocating DAG for epoch #377 (3.95) GB
GPU3: Generating DAG for epoch #377
GPU4: Free VRAM: 3.951 GB; used: 0.049 GB
GPU4: Disabling DAG pre-allocation (not enough VRAM)
GPU4: Allocating DAG for epoch #377 (3.95) GB
GPU4: Generating DAG for epoch #377
GPU2: DAG 12%
GPU5: Free VRAM: 3.951 GB; used: 0.049 GB
GPU5: Disabling DAG pre-allocation (not enough VRAM)
GPU5: Allocating DAG for epoch #377 (3.95) GB
GPU5: Generating DAG for epoch #377
GPU3: DAG 14%
GPU6: Free VRAM: 7.951 GB; used: 0.049 GB
GPU6: Allocating DAG for epoch #377 (3.95) GB
GPU6: Generating DAG for epoch #377
Eth: New job #ab50f6a4 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU2: DAG 25%
Eth: New job #780e8b76 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU4: DAG 16%
GPU7: Free VRAM: 3.951 GB; used: 0.049 GB
GPU7: Disabling DAG pre-allocation (not enough VRAM)
GPU7: Allocating DAG for epoch #377 (3.95) GB
GPU7: Generating DAG for epoch #377
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) |
|
|
|
|
1adam12
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 25, 2020, 10:53:27 PM |
|
Ok, simple fix Turned each individually into "compute" mode instead of "graphics" using the AMD Radeon Software advanced graphics settings.  My hashrate is stuck at zero. I've tried running on 5.0e instead and get the same results. Ran DDU which did not change results either. Any advice? OpenCL driver version: 19.6.2/3
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU2: AMD Radeon (TM) R9 380 Series (pcie , OpenCL 2.0, 4 GB VRAM, 28 CUs
GPU3: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU4: Radeon (TM) RX 480 Graphics (pcie 11), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU6: Radeon (TM) RX 480 Graphics (pcie 13), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon (TM) RX 480 Graphics (pcie 15), OpenCL 2.0, 4 GB VRAM, 36 CUs
Eth: Loading pools from epools.txt
Eth: the pool list contains 6 pools (1 from command-line)
Eth: primary pool: eth-eu2.nanopool.org:9999
Starting GPU mining
GPU1: AMD driver 19.20
GPU2: AMD driver 19.20
GPU3: AMD driver 19.20
GPU4: AMD driver 19.20
GPU5: AMD driver 19.20
GPU6: AMD driver 19.20
GPU7: AMD driver 19.20
Eth: Connecting to ethash pool eth-eu2.nanopool.org:9999 (proto: EthProxy)
GPU1: 31C 0% 4W, GPU2: 35C 0%, GPU3: 35C 0% 4W, GPU4: 39C 0% 8W, GPU5: 34C 0% 7W, GPU6: 34C 0% 9W, GPU7: 37C 0% 8W
GPUs power: 40.1 W
Eth: Connected to ethash pool eth-eu2.nanopool.org:9999 (51.15.55.162)
Eth: New job #9de18436 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #377
GPU2: Starting up... (0)
GPU3: Starting up... (0)
GPU4: Starting up... (0)
GPU5: Starting up... (0)
GPU6: Starting up... (0)
GPU7: Starting up... (0)
Eth: New job #78bfae07 from eth-eu2.nanopool.org:9999; diff: 10000MH
Eth: New job #051aafc9 from eth-eu2.nanopool.org:9999; diff: 10000MH
Eth: New job #0b3df98d from eth-eu2.nanopool.org:9999; diff: 10000MH
Light cache generated in 3.8 s (16.6 MB/s)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0)
GPU2: Free VRAM: 3.951 GB; used: 0.049 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #377 (3.95) GB
GPU2: Generating DAG for epoch #377
Eth: New job #5be64e37 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU3: Free VRAM: 3.951 GB; used: 0.049 GB
GPU3: Disabling DAG pre-allocation (not enough VRAM)
GPU3: Allocating DAG for epoch #377 (3.95) GB
GPU3: Generating DAG for epoch #377
GPU4: Free VRAM: 3.951 GB; used: 0.049 GB
GPU4: Disabling DAG pre-allocation (not enough VRAM)
GPU4: Allocating DAG for epoch #377 (3.95) GB
GPU4: Generating DAG for epoch #377
GPU2: DAG 12%
GPU5: Free VRAM: 3.951 GB; used: 0.049 GB
GPU5: Disabling DAG pre-allocation (not enough VRAM)
GPU5: Allocating DAG for epoch #377 (3.95) GB
GPU5: Generating DAG for epoch #377
GPU3: DAG 14%
GPU6: Free VRAM: 7.951 GB; used: 0.049 GB
GPU6: Allocating DAG for epoch #377 (3.95) GB
GPU6: Generating DAG for epoch #377
Eth: New job #ab50f6a4 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU2: DAG 25%
Eth: New job #780e8b76 from eth-eu2.nanopool.org:9999; diff: 10000MH
GPU4: DAG 16%
GPU7: Free VRAM: 3.951 GB; used: 0.049 GB
GPU7: Disabling DAG pre-allocation (not enough VRAM)
GPU7: Allocating DAG for epoch #377 (3.95) GB
GPU7: Generating DAG for epoch #377
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) |
|
|
|
|
reep74
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 25, 2020, 11:12:48 PM |
|
Sorry but how to use?, i edit start-mine but dosent work
|
|
|
|
|
SiNeReiNZzz
Legendary
Offline
Activity: 1022
Merit: 1043
αLPʜα αɴd ΩMeGa
|
|
November 25, 2020, 11:30:41 PM |
|
PhoenixMiner 5.2f available
Notes:
+Support new algo for ETC - ETCHash
+Fixed bugs and errors
Download
Windows: DELETED - Directs to Malware
Linux: DELETED - Directs to Malware
BEWARE! This is a Malware SCAM! |
|
|
|
waywoos
Jr. Member
Offline
Activity: 124
Merit: 2
|
|
November 26, 2020, 01:12:03 AM |
|
mine got deleted as well.  |
|
|
|
|
|
miner29
|
|
November 26, 2020, 01:15:27 AM |
|
if you quote the malware links expect to be deleted...as you should be.
|
|
|
|
|
SiNeReiNZzz
Legendary
Offline
Activity: 1022
Merit: 1043
αLPʜα αɴd ΩMeGa
|
|
November 26, 2020, 02:29:42 AM |
|
The whole OP is a scam! Beware!
|
|
|
|
|
miner29
|
|
November 26, 2020, 02:47:15 AM |
|
Im not so quick to call that. Ive got it on a test rig and appears to be nothing funny going on. The checksums check out. I see and tested the virustotal....but that is not absolute. Im all got anybody elses input. Because ive run Phoenix for a long time no issues is the other issue i take with this. Now the other none OP links...yeah those are no good.
|
|
|
|
|
alikait
Newbie
Offline
Activity: 51
Merit: 0
|
|
November 26, 2020, 03:18:07 AM |
|
if you quote the malware links expect to be deleted...as you should be.
Didn't know that rule, was just trying to warn people before downloading it but one person still downloaded it  |
|
|
|
|
|
miner29
|
|
November 26, 2020, 04:54:32 AM |
|
if you quote the malware links expect to be deleted...as you should be.
Didn't know that rule, was just trying to warn people before downloading it but one person still downloaded it Warning isnt the issue...its the quoting...edit the links so others cant click it....and hit the report button 👍 |
|
|
|
|
batsonxl
Member
Offline
Activity: 1213
Merit: 28
|
|
November 26, 2020, 06:44:42 AM |
|
hi, i have 7 rx580 8gb, i install phoenixminer 5.2e and give to me error,
the configuration are like this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner -worker Rig1 -pool eth.altpool.pro:3841 -wal 0x0a95036f9780c96ec873004252f2d223247dfaac -pass x -log 0 -proto 4
and work like this:
GPUs: 1: 30.706 MH/s (0/1) 2: 21.293 MH/s (0) 3: 24.818 MH/s (0) 4: 29.724 MH/s (0) 5: 24.806 MH/s (0/1) 6: 30.704 MH/s (0) 7: 23.531 MH/s (0)
Eth speed: 185.370 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 30.432 MH/s (0/1) 2: 21.162 MH/s (0) 3: 24.758 MH/s (0) 4: 29.721 MH/s (0) 5: 24.832 MH/s (0/1) 6: 30.703 MH/s (0) 7: 23.762 MH/s (0)
Eth: New job #21ff7ef4 from eth.altpool.pro:3841; diff: 15000MH
GPU1: 89C 26% 118W, GPU2: 88C 24% 101W, GPU3: 89C 29% 111W, GPU4: 71C 41% 121W, GPU5: 89C 28% 110W, GPU6: 86C 24% 134W, GPU7: 88C 34% 131W
GPUs power: 826.3 W
Eth speed: 184.857 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.967 MH/s (0/1) 2: 21.088 MH/s (0) 3: 24.623 MH/s (0) 4: 29.722 MH/s (0) 5: 24.701 MH/s (0/1) 6: 30.705 MH/s (0) 7: 24.052 MH/s (0)
Eth: New job #3e3d70b3 from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 183.297 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.433 MH/s (0/1) 2: 20.997 MH/s (0) 3: 24.578 MH/s (0) 4: 29.729 MH/s (0) 5: 24.421 MH/s (0/1) 6: 30.688 MH/s (0) 7: 23.451 MH/s (0)
Eth speed: 182.614 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.159 MH/s (0/1) 2: 20.901 MH/s (0) 3: 24.480 MH/s (0) 4: 29.729 MH/s (0) 5: 24.285 MH/s (0/1) 6: 30.687 MH/s (0) 7: 23.374 MH/s (0)
Eth: New job #0d792c98 from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 182.679 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 28.909 MH/s (0/1) 2: 20.820 MH/s (0) 3: 24.327 MH/s (0) 4: 29.728 MH/s (0) 5: 24.319 MH/s (0/1) 6: 30.682 MH/s (0) 7: 23.893 MH/s (0)
Eth: Incorrect ETH share from GPU5
Eth: New job #32fe1c3c from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 182.309 MH/s, shares: 0/0/3, time: 0:02
GPUs: 1: 28.636 MH/s (0/1) 2: 20.714 MH/s (0) 3: 24.255 MH/s (0) 4: 29.725 MH/s (0) 5: 24.438 MH/s (0/2) 6: 30.607 MH/s (0) 7: 23.935 MH/s (0)
Eth speed: 181.878 MH/s, shares: 0/0/3, time: 0:02
GPUs: 1: 28.292 MH/s (0/1) 2: 20.605 MH/s (0) 3: 24.151 MH/s (0) 4: 29.727 MH/s (0) 5: 24.623 MH/s (0/2) 6: 30.432 MH/s (0) 7: 24.049 MH/s (0)
alguien me puede hechar una mano? gracias.
-proto 4 for nicehash. you must change it to 2 or delete. |
|
|
|
|
reep74
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 26, 2020, 07:05:45 AM |
|
hi, i have 7 rx580 8gb, i install phoenixminer 5.2e and give to me error,
the configuration are like this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner -worker Rig1 -pool eth.altpool.pro:3841 -wal 0x0a95036f9780c96ec873004252f2d223247dfaac -pass x -log 0 -proto 4
and work like this:
GPUs: 1: 30.706 MH/s (0/1) 2: 21.293 MH/s (0) 3: 24.818 MH/s (0) 4: 29.724 MH/s (0) 5: 24.806 MH/s (0/1) 6: 30.704 MH/s (0) 7: 23.531 MH/s (0)
Eth speed: 185.370 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 30.432 MH/s (0/1) 2: 21.162 MH/s (0) 3: 24.758 MH/s (0) 4: 29.721 MH/s (0) 5: 24.832 MH/s (0/1) 6: 30.703 MH/s (0) 7: 23.762 MH/s (0)
Eth: New job #21ff7ef4 from eth.altpool.pro:3841; diff: 15000MH
GPU1: 89C 26% 118W, GPU2: 88C 24% 101W, GPU3: 89C 29% 111W, GPU4: 71C 41% 121W, GPU5: 89C 28% 110W, GPU6: 86C 24% 134W, GPU7: 88C 34% 131W
GPUs power: 826.3 W
Eth speed: 184.857 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.967 MH/s (0/1) 2: 21.088 MH/s (0) 3: 24.623 MH/s (0) 4: 29.722 MH/s (0) 5: 24.701 MH/s (0/1) 6: 30.705 MH/s (0) 7: 24.052 MH/s (0)
Eth: New job #3e3d70b3 from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 183.297 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.433 MH/s (0/1) 2: 20.997 MH/s (0) 3: 24.578 MH/s (0) 4: 29.729 MH/s (0) 5: 24.421 MH/s (0/1) 6: 30.688 MH/s (0) 7: 23.451 MH/s (0)
Eth speed: 182.614 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.159 MH/s (0/1) 2: 20.901 MH/s (0) 3: 24.480 MH/s (0) 4: 29.729 MH/s (0) 5: 24.285 MH/s (0/1) 6: 30.687 MH/s (0) 7: 23.374 MH/s (0)
Eth: New job #0d792c98 from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 182.679 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 28.909 MH/s (0/1) 2: 20.820 MH/s (0) 3: 24.327 MH/s (0) 4: 29.728 MH/s (0) 5: 24.319 MH/s (0/1) 6: 30.682 MH/s (0) 7: 23.893 MH/s (0)
Eth: Incorrect ETH share from GPU5
Eth: New job #32fe1c3c from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 182.309 MH/s, shares: 0/0/3, time: 0:02
GPUs: 1: 28.636 MH/s (0/1) 2: 20.714 MH/s (0) 3: 24.255 MH/s (0) 4: 29.725 MH/s (0) 5: 24.438 MH/s (0/2) 6: 30.607 MH/s (0) 7: 23.935 MH/s (0)
Eth speed: 181.878 MH/s, shares: 0/0/3, time: 0:02
GPUs: 1: 28.292 MH/s (0/1) 2: 20.605 MH/s (0) 3: 24.151 MH/s (0) 4: 29.727 MH/s (0) 5: 24.623 MH/s (0/2) 6: 30.432 MH/s (0) 7: 24.049 MH/s (0)
alguien me puede hechar una mano? gracias.
-proto 4 for nicehash. you must change it to 2 or delete. already use 2 or delete but still restart and quit |
|
|
|
|
batsonxl
Member
Offline
Activity: 1213
Merit: 28
|
|
November 26, 2020, 07:43:04 AM |
|
hi, i have 7 rx580 8gb, i install phoenixminer 5.2e and give to me error,
the configuration are like this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner -worker Rig1 -pool eth.altpool.pro:3841 -wal 0x0a95036f9780c96ec873004252f2d223247dfaac -pass x -log 0 -proto 4
and work like this:
GPUs: 1: 30.706 MH/s (0/1) 2: 21.293 MH/s (0) 3: 24.818 MH/s (0) 4: 29.724 MH/s (0) 5: 24.806 MH/s (0/1) 6: 30.704 MH/s (0) 7: 23.531 MH/s (0)
Eth speed: 185.370 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 30.432 MH/s (0/1) 2: 21.162 MH/s (0) 3: 24.758 MH/s (0) 4: 29.721 MH/s (0) 5: 24.832 MH/s (0/1) 6: 30.703 MH/s (0) 7: 23.762 MH/s (0)
Eth: New job #21ff7ef4 from eth.altpool.pro:3841; diff: 15000MH
GPU1: 89C 26% 118W, GPU2: 88C 24% 101W, GPU3: 89C 29% 111W, GPU4: 71C 41% 121W, GPU5: 89C 28% 110W, GPU6: 86C 24% 134W, GPU7: 88C 34% 131W
GPUs power: 826.3 W
Eth speed: 184.857 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.967 MH/s (0/1) 2: 21.088 MH/s (0) 3: 24.623 MH/s (0) 4: 29.722 MH/s (0) 5: 24.701 MH/s (0/1) 6: 30.705 MH/s (0) 7: 24.052 MH/s (0)
Eth: New job #3e3d70b3 from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 183.297 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.433 MH/s (0/1) 2: 20.997 MH/s (0) 3: 24.578 MH/s (0) 4: 29.729 MH/s (0) 5: 24.421 MH/s (0/1) 6: 30.688 MH/s (0) 7: 23.451 MH/s (0)
Eth speed: 182.614 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 29.159 MH/s (0/1) 2: 20.901 MH/s (0) 3: 24.480 MH/s (0) 4: 29.729 MH/s (0) 5: 24.285 MH/s (0/1) 6: 30.687 MH/s (0) 7: 23.374 MH/s (0)
Eth: New job #0d792c98 from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 182.679 MH/s, shares: 0/0/2, time: 0:02
GPUs: 1: 28.909 MH/s (0/1) 2: 20.820 MH/s (0) 3: 24.327 MH/s (0) 4: 29.728 MH/s (0) 5: 24.319 MH/s (0/1) 6: 30.682 MH/s (0) 7: 23.893 MH/s (0)
Eth: Incorrect ETH share from GPU5
Eth: New job #32fe1c3c from eth.altpool.pro:3841; diff: 15000MH
Eth speed: 182.309 MH/s, shares: 0/0/3, time: 0:02
GPUs: 1: 28.636 MH/s (0/1) 2: 20.714 MH/s (0) 3: 24.255 MH/s (0) 4: 29.725 MH/s (0) 5: 24.438 MH/s (0/2) 6: 30.607 MH/s (0) 7: 23.935 MH/s (0)
Eth speed: 181.878 MH/s, shares: 0/0/3, time: 0:02
GPUs: 1: 28.292 MH/s (0/1) 2: 20.605 MH/s (0) 3: 24.151 MH/s (0) 4: 29.727 MH/s (0) 5: 24.623 MH/s (0/2) 6: 30.432 MH/s (0) 7: 24.049 MH/s (0)
alguien me puede hechar una mano? gracias.
-proto 4 for nicehash. you must change it to 2 or delete. already use 2 or delete but still restart and quit oh i see you have many mistakes, PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 .exe missing also worker you dont need write worker just add into wallet .Rig1 or whatever name you give |
|
|
|
|
reep74
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 26, 2020, 09:48:06 AM |
|
i did, and now every rx580 are working in 11 mh
|
|
|
|
|
max64rus
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 26, 2020, 03:19:40 PM |
|
I wanted to report an issue I ran into on v5.2e for mixed-gen ETH mining on one XFX RX 5700 8GB + one XFX RX 480 8GB + one MSI RX 480 8GB on Ubuntu 18.04.4 LTS (via minerstatOS) with amdgpu-pro v19.30 drivers. When I upgraded to v5.2e, I saw my RX 5700 take approximately an hour to build its DAG file, and then yield 0 hashrate, and the two RX 480s only produced about a third of their normal hashrate. I previously saw the same behavior with all PhoenixMiner v5.1x versions, as well.
Rolling back to v5.0e immediately resolves the issue without a reboot. I have used a few versions of the PhoenixMiner for about ten months on this mixed-gen rig without issue, so this has been something introduced after v5.0e. In case it's any help, I am including a few log excerpts, though I never saw any suspicious messages or error logs to report.
I had same problem, the rig has NVIDIA and AMD cards. I decided to look for alternatives. Half day i use gminer, hash rate is about the same, there are no problems, + they promise few stale shares. |
|
|
|
|
melfice123
Newbie
Offline
Activity: 42
Merit: 0
|
|
November 26, 2020, 03:42:34 PM |
|
are there really people who fall for these tricks?
|
|
|
|
|
|
laineux
|
|
November 26, 2020, 08:53:21 PM |
|
So boring all those posts with scam and spam Every time, I hope an announcement about the new version with ETC new algo supported  |
|
|
|
|
Permonik
Member
Offline
Activity: 275
Merit: 11
|
|
November 26, 2020, 09:50:20 PM |
|
Hi guys, do you know if phoenixe will release new version for ETC mining? Hardfork will be within two days...
|
|
|
|
|
|
Dowper_
|
|
November 26, 2020, 11:03:22 PM |
|
Hi guys, do you know if phoenixe will release new version for ETC mining? Hardfork will be within two days...
He is working on this, I think it will be ready on time. |
|
|
|
zeef
Newbie
Offline
Activity: 304
Merit: 0
|
|
November 27, 2020, 01:18:54 AM |
|
Phoenix i need your help  Can i insert an .bat for when the miner restart from watchdog to call my overdriventool configs? Sometime one gpu got reseted and how we know gets power hungry Don´t find this option in readme -rmode help. or instead call my bat in PM starts do the same on restart from watchdog? Thanks |
|
|
|
|
|
