PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[zeef]

I would really love to see a screen shot of ANYONE that can pump out more than 30 MH/card on (12+ per rig) RX 580 cards and hash stable for more than 24 hrs. No matter what I try it just will not happen. As soon as I push to 30 or higher, the rig will start to crash. I used to tune individual cards and get higher hash rate but that function has been broken since forever ago. So I would really love to see if anyone out there is actually able to achieve this.

Here You Go man: My 12 Card RIG with 8* RX580 8GB, RX5700, 3* RX5700XT
https://i.imgur.com/dwdqyFz.jpeg

I appreciate your screen shot but it only shows your rig at 47 min. I was asking if anyone can show a rig running 30+ MH for more than 24 hr.


Side note: Did PM ever fix the problem with not being able to set cclock and mclock for individual cards?

one of my rig...

https://i.imgur.com/dkQk1Gm.jpg

What OC settings you have to get so low power consumption?

[vydelek]

Good day,
for multiple RIGs at the same setting everything is OK but for three rigs it happened that PM stopped mining.

Please what is the problem, what command to try for DAG generation.

PM VERZE 5.2e


2020.12.06:16:26:50.440: main GPUs: 1: 31.047 MH/s (71) 2: 31.580 MH/s (94) 3: 31.585 MH/s (65) 4: 31.299 MH/s (71) 5: 30.667 MH/s (77) 6: 31.581 MH/s (79) 7: 31.448 MH/s (78)
2020.12.06:16:26:51.705: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x235323ee2760cc24f0f13eda8a0d707624c68dee7fbb17baaf3582abf9da6f32","0x24a739dd7e88652c7b9c8b21ab1ea88a6a1bc824232e6ffb030387c1518290d7","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xadf33f"]}
2020.12.06:16:26:51.706: eths Eth: New job #235323ee from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.06:16:26:52.658: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x55ef1a72e2937b6f4c7167c95f610335ae78e35b1f1200763b8a8cacda35b9c5","0x0f019d165efddfcfc233aab381f260fcc26c8bcf497dcffc4b78fd0c5223b3d1","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xadf340"]}
2020.12.06:16:26:52.658: eths Eth: New job #55ef1a72 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.06:16:26:52.941: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xad96f4a8851530a0bf859edb3ee2d161d66b8063d16e56068823a36b757093eb","0x0f019d165efddfcfc233aab381f260fcc26c8bcf497dcffc4b78fd0c5223b3d1","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xadf340"]}
2020.12.06:16:26:52.942: eths Eth: New job #ad96f4a8 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.06:16:26:52.960: GPU7 GPU7: Starting up... (0)
2020.12.06:16:26:52.961: GPU7 GPU7: Generating ethash light cache for epoch #380
2020.12.06:16:26:52.963: GPU3 GPU3: Starting up... (0)
2020.12.06:16:26:52.983: GPU4 GPU4: Starting up... (0)
2020.12.06:16:26:53.101: GPU2 GPU2: Starting up... (0)
2020.12.06:16:26:53.103: GPU5 GPU5: Starting up... (0)
2020.12.06:16:26:53.140: GPU1 GPU1: Starting up... (0)
2020.12.06:16:26:53.160: GPU6 GPU6: Starting up... (0)
2020.12.06:16:26:55.457: main Eth speed: 0.000 MH/s, shares: 535/0/0, time: 2:36
2020.12.06:16:26:55.457: main GPUs: 1: 0.000 MH/s (71) 2: 0.000 MH/s (94) 3: 0.000 MH/s (65) 4: 0.000 MH/s (71) 5: 0.000 MH/s (77) 6: 0.000 MH/s (79) 7: 0.000 MH/s (78)
2020.12.06:16:26:56.748: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xa4159c8a17bd9674060a4282c2180933adb295c8fe38ce4683e56ec3a3d62f0e","0x0f019d165efddfcfc233aab381f260fcc26c8bcf497dcffc4b78fd0c5223b3d1","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xadf340"]}
2020.12.06:16:26:56.748: eths Eth: New job #a4159c8a from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.06:16:26:57.131: GPU7 Light cache generated in 4.2 s (15.2 MB/s)
2020.12.06:16:26:57.463: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.12.06:16:26:57.477: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2020.12.06:16:26:57.477: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xa4159c8a17bd9674060a4282c2180933adb295c8fe38ce4683e56ec3a3d62f0e","0x0f019d165efddfcfc233aab381f260fcc26c8bcf497dcffc4b78fd0c5223b3d1","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xadf340"]}
2020.12.06:16:27:00.479: main Eth speed: 0.000 MH/s, shares: 535/0/0, time: 2:36
2020.12.06:16:27:00.479: main GPUs: 1: 0.000 MH/s (71) 2: 0.000 MH/s (94) 3: 0.000 MH/s (65) 4: 0.000 MH/s (71) 5: 0.000 MH/s (77) 6: 0.000 MH/s (79) 7: 0.000 MH/s (78)
2020.12.06:16:27:00.870: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xf3ae18a4ef2381e6fa0c8a14b4f4525d6151597834959fc4d0e71abb0cb4a408","0x0f019d165efddfcfc233aab381f260fcc26c8bcf497dcffc4b78fd0c5223b3d1","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xadf340"]}
2020.12.06:16:27:00.870: eths Eth: New job #f3ae18a4 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.06:16:27:02.132: GPU2 GPU2: Generating DAG for epoch #380
2020.12.06:16:27:02.132: GPU4 GPU4: Generating DAG for epoch #380
2020.12.06:16:27:02.132: GPU3 GPU3: Generating DAG for epoch #380
2020.12.06:16:27:02.133: GPU1 GPU1: Generating DAG for epoch #380
2020.12.06:16:27:02.133: GPU6 GPU6: Generating DAG for epoch #380
2020.12.06:16:27:02.133: GPU5 GPU5: Generating DAG for epoch #380
2020.12.06:16:27:02.133: GPU7 GPU7: Generating DAG for epoch #380
2020.12.06:16:27:02.887: main GPU1: 54C 33% 42W, GPU2: 52C 32% 32W, GPU3: 51C 30% 42W, GPU4: 52C 32% 40W, GPU5: 52C 31% 41W, GPU6: 50C 30% 40W, GPU7: 47C 28% 33W
GPUs power: 270.1 W
2020.12.06:16:27:05.491: main Eth speed: 0.000 MH/s, shares: 535/0/0, time: 2:36
2020.12.06:16:27:05.491: main GPUs: 1: 0.000 MH/s (71) 2: 0.000 MH/s (94) 3: 0.000 MH/s (65) 4: 0.000 MH/s (71) 5: 0.000 MH/s (77) 6: 0.000 MH/s (79) 7: 0.000 MH/s (78)
2020.12.06:16:27:07.463: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.12.06:16:27:07.463: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xc633a5c","0x736bfa2f7e89ddc019c7a171628695c5f085dea0c0d1c0313f0aa27e4b3fc10a"]}

THE END - NO MINING - ERROR - PLEASE HELP

[waywoos]

guys the 4gb days are done with eth.
mine etc or beam or ubiq or other coins that require a less than 4gb dag
there is no solution besides going to linux or other non windows OS for a few more weeks at best

[vydelek]

Please why PM does not auto reset when GK crashes on -rmode 2 command when running as administrator? WIN10

[casslo]

guys the 4gb days are done with eth.
mine etc or beam or ubiq or other coins that require a less than 4gb dag
there is no solution besides going to linux or other non windows OS for a few more weeks at best

just move to a usb OS like hiveOS or other, its pretty simple tbh, i setup it very quick without any problem last week and 4gb are working there 100%

[waywoos]

guys the 4gb days are done with eth.
mine etc or beam or ubiq or other coins that require a less than 4gb dag
there is no solution besides going to linux or other non windows OS for a few more weeks at best

just move to a usb OS like hiveOS or other, its pretty simple tbh, i setup it very quick without any problem last week and 4gb are working there 100%

Yeah it’s temporary

[Vladegg]

Please why PM does not auto reset when GK crashes on -rmode 2 command when running as administrator? WIN10

Win 10 LTSC 17763, Win 10 Pro 19041 - Phoenixminer 5.3b stuck on errors and system can't restart. Doesn't matter PM under Administrator or not.

[goxed]

Hey PhoenixMiner, ever since the last ETH Epoch and the new 3.98GB DAG, I am seeing a slowdown on all my mining graphics cards. It varies from 5 - 10% depending on the card type and other settings. I am using version 5.3b. Any explanations as what could be the reason for this slowdown?

The slowdown remain after re-booting.

[Malefol7]

hi, I'm new to the forum, I run a pool with core-geth 1.11.19, and I run 5.3b but I get incorrect shares, why?
amd 20.4.x
https://cominers.org/screen.png

Help Thanks.

[Kiawpqe]

hi, I'm new to the forum, I run a pool with core-geth 1.11.19, and I run 5.3b but I get incorrect shares, why?
amd 20.4.x
https://cominers.org/screen.png

Help Thanks.

Hello, it may be because you just turned on PM and -gt you're adjusting your Gpus

[Malefol7]

hi, the problem continues even if the miner remains running for 10 minutes
Only etc

this happened in the update of the node to 1.11.19, I was forced as the miners did not find any blocks after thanos for about a week

[Kiawpqe]

hi, the problem continues even if the miner remains running for 10 minutes
Only etc

you can say your .config or .bat
could be too overclocking.     
which Gpus uses ??
more info please

[Malefol7]

Using rx580 cclock 1160 and mclock 2150 what I've always used
Win 10 13 gpus
On eth not riceve errors
Use bat file
the problem may appear to be a beta of 5.3b

5.3b with ethermine it works but with my pool it doesn't want to know Carnus (v1.11.19)

[vladutz1186]

Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings !
I don`t use ./phoenixminer to start miner ... I use only local.conf file

globalminer phoenixminer
stratumproxy enabled
proxywallet 0xf1396cbxxxxxxxxxx
proxypool1 eth.2miners.com:2020
poolpass1 x

And OC strings are good ?

cor xxxx xxxx
mem xxxx xxxx
dpm xxxx xxxx

[miner29]

Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings !
I don`t use ./phoenixminer to start miner ... I use only local.conf file

globalminer phoenixminer
stratumproxy enabled
proxywallet 0xf1396cbxxxxxxxxxx
proxypool1 eth.2miners.com:2020
poolpass1 x

And OC strings are good ?

cor xxxx xxxx
mem xxxx xxxx
dpm xxxx xxxx

cor (rig id) oc oc oc oc

with rig id = 6 digit hexidecimal number of rig (get either from rig or from web page monitor)
oc = core you want for 570/580 1150 is a good start
same with mem (rig id) and the oc for each card seperated by space.  i would start with say 2100 for 570/580.


Dpm isnt really used but set it to 5 for each card

also vlt (rig id) 851 851 875

for vlt settings above = 0.851v

hope it helps. 

[vladutz1186]

Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings !
I don`t use ./phoenixminer to start miner ... I use only local.conf file

globalminer phoenixminer
stratumproxy enabled
proxywallet 0xf1396cbxxxxxxxxxx
proxypool1 eth.2miners.com:2020
poolpass1 x

And OC strings are good ?

cor xxxx xxxx
mem xxxx xxxx
dpm xxxx xxxx

cor (rig id) oc oc oc oc

with rig id = 6 digit hexidecimal number of rig (get either from rig or from web page monitor)
oc = core you want for 570/580 1150 is a good start
same with mem (rig id) and the oc for each card seperated by space.  i would start with say 2100 for 570/580.


Dpm isnt really used but set it to 5 for each card

also vlt (rig id) 851 851 875

for vlt settings above = 0.851v

hope it helps. 

Thanks for your answer ! I know about rig ID, etc and how to OC in Ethos... but I dont know how to disable auto-tune . I ask that because Ethos don`t come with Phoenixminer had to be implemented. Miner work fine but I don`t like auto-tune because I have low hashrate ( with auto-tune ) .

GPU1: 32C 89% 100W, GPU2: 46C 89% 92W, GPU3: 32C 89% 95W, GPU4: 33C 89% 95W, GPU5: 50C 89% 103W, GPU6: 46C 89% 94W
GPUs power: 579.0 W
Eth speed: 160.406 MH/s, shares: 1786/0/0, time: 27:43
GPUs: 1: 24.989 MH/s (267) 2: 28.482 MH/s (304) 3: 24.987 MH/s (305) 4: 24.990 MH/s (271) 5: 28.479 MH/s (344) 6: 28.479 MH/s (295)


models:                                01 Ellesmere RX 570 113-2E366AU-X5T Micron
                                          03 Ellesmere RX 580 xxx-xxx-xxx SK Hynix
                                          04 Ellesmere RX 570 113-2E366AU-X5T Micron
                                          05 Ellesmere RX 570 113-2E366AU-X5T Micron
                                          06 Ellesmere RX 580 xxx-xxx-xxx SK Hynix
                                          07 Ellesmere RX 580 xxx-xxx-xxx SK Hynix


core:                                   1168 1257 1168 1168 1257 1257
mem:                                   1750 2000 1750 1750 2000 2000
voltage:                               0.992 1.049 0.968 0.965 1.100 1.068

[Kiawpqe]

Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings !
I don`t use ./phoenixminer to start miner ... I use only local.conf file

globalminer phoenixminer
stratumproxy enabled
proxywallet 0xf1396cbxxxxxxxxxx
proxypool1 eth.2miners.com:2020
poolpass1 x

And OC strings are good ?

cor xxxx xxxx
mem xxxx xxxx
dpm xxxx xxxx

cor (rig id) oc oc oc oc

with rig id = 6 digit hexidecimal number of rig (get either from rig or from web page monitor)
oc = core you want for 570/580 1150 is a good start
same with mem (rig id) and the oc for each card seperated by space.  i would start with say 2100 for 570/580.


Dpm isnt really used but set it to 5 for each card

also vlt (rig id) 851 851 875

for vlt settings above = 0.851v

hope it helps. 

Thanks for your answer ! I know about rig ID, etc and how to OC in Ethos... but I dont know how to disable auto-tune . I ask that because Ethos don`t come with Phoenixminer had to be implemented. Miner work fine but I don`t like auto-tune because I have low hashrate ( with auto-tune ) .

GPU1: 32C 89% 100W, GPU2: 46C 89% 92W, GPU3: 32C 89% 95W, GPU4: 33C 89% 95W, GPU5: 50C 89% 103W, GPU6: 46C 89% 94W
GPUs power: 579.0 W
Eth speed: 160.406 MH/s, shares: 1786/0/0, time: 27:43
GPUs: 1: 24.989 MH/s (267) 2: 28.482 MH/s (304) 3: 24.987 MH/s (305) 4: 24.990 MH/s (271) 5: 28.479 MH/s (344) 6: 28.479 MH/s (295)


models:                                01 Ellesmere RX 570 113-2E366AU-X5T Micron
                                          03 Ellesmere RX 580 xxx-xxx-xxx SK Hynix
                                          04 Ellesmere RX 570 113-2E366AU-X5T Micron
                                          05 Ellesmere RX 570 113-2E366AU-X5T Micron
                                          06 Ellesmere RX 580 xxx-xxx-xxx SK Hynix
                                          07 Ellesmere RX 580 xxx-xxx-xxx SK Hynix


core:                                   1168 1257 1168 1168 1257 1257
mem:                                   1750 2000 1750 1750 2000 2000
voltage:                               0.992 1.049 0.968 0.965 1.100 1.068

Win 10

-rmode 1
-rvram -1
-tt 57,61,61,62,57,57,61
-eres 100
-proto 2
-cdm 0
-hstats 2
-astats 1
-amd
-acm
-wdog 1
-log 0
-gpow 100,100,100,100,100,100,100
-coin eth
-clf 2
-clNew 1
-clgreen 1
-clKernel 1
-minRigSpeed 180
-prate 0.14
-gpus 1,2,3,4,5,6,7
-cclock 1190,1190,1190,1190,1190,1190,1190
-cvddc 845,865,865,865,845,845,865
-mclock 2110,2110,2110,2112,2112,2112,2110
-mvddc 865,885,885,885,865,865,885
-pool ssl://eu1.ethermine.org:5555
-pool2 ssl://us1.ethermine.org:5555
-wal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
#-dpool blake2s.eu.nicehash.com:3361
#-dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
#-dcoin blake2s
-mt 0

*** 0:17 *** 12/7 16:19 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:17
Eth: Accepted shares 51 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 210.7 GH (!)
Eth: Average speed (5 min): 219.726 MH/s
Eth: Effective speed: 196.53 MH/s; at pool: 196.53 MH/s
Eth: Estimated income: 8.35 USD/day

Eth: New job #4f6267b4 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth: New job #7db76626 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 219.517 MH/s, shares: 51/0/0, time: 0:17
GPUs: 1: 32.080 MH/s (4) 2: 32.210 MH/s (13) 3: 32.210 MH/s (5) 4: 26.654 MH/s (3) 5: 32.079 MH/s ( 6: 32.074 MH/s (9) 7: 32.210 MH/s (9)
Eth: New job #c2f7096c from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth: GPU5: ETH share found!
Eth: Share actual difficulty: 7631 MH
Eth: Share accepted in 24 ms
Eth speed: 220.413 MH/s, shares: 52/0/0, time: 0:17
GPUs: 1: 32.180 MH/s (4) 2: 32.362 MH/s (13) 3: 32.337 MH/s (5) 4: 26.785 MH/s (3) 5: 32.187 MH/s (9) 6: 32.201 MH/s (9) 7: 32.362 MH/s (9)
Eth: GPU3: ETH share found!
Eth: Share actual difficulty: 4951 MH
Eth: Share accepted in 24 ms
Eth: New job #b5563f4b from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: 57C 39% 83W, GPU2: 61C 44% 96W, GPU3: 61C 46% 90W, GPU4: 62C 55% 84W, GPU5: 57C 36% 84W, GPU6: 57C 39% 82W, GPU7: 61C 48% 94W
GPU1: cclock 1190 MHz, cvddc 868 mV, mclock 2110 MHz    MSI RX 580 8gb
GPU2: cclock 1190 MHz, cvddc 887 mV, mclock 2110 MHz    XFX 580 8GB
GPU3: cclock 1190 MHz, cvddc 887 mV, mclock 2110 MHz    XFX 580 8GB
GPU4: cclock 1190 MHz, cvddc 887 mV, mclock 2112 MHz    POWER-COLOR RX-580 8gb
GPU5: cclock 1190 MHz, cvddc 868 mV, mclock 2112 MHz    MSI RX 580 8gb
GPU6: cclock 1190 MHz, cvddc 868 mV, mclock 2112 MHz    MSI RX 580 8gb
GPU7: cclock 1190 MHz, cvddc 887 mV, mclock 2110 MHz    XFX 580 8GB
GPUs power: 612.7 W; cost: 2.06 USD/day



3 x Msi rx 580 8gb=32,7mh/s    BIOSMOD
3 x xfx 580 8gb=32,5mh/s   NO BIOSMOD (DUAL BIOS W/ MINING BIOS stock)
1 Powercolor 580 8gb 26mh/s (w/ monitor)  NO BIOSMOD
GPUs power: 612.7 W

you:
but I dont know how to disable auto-tune = -gt 0

[duplj30]

Hey PhoenixMiner, ever since the last ETH Epoch and the new 3.98GB DAG, I am seeing a slowdown on all my mining graphics cards. It varies from 5 - 10% depending on the card type and other settings. I am using version 5.3b. Any explanations as what could be the reason for this slowdown?

The slowdown remain after re-booting.

now it will become the norm
https://bitcointalk.org/index.php?topic=2647654.msg55669311#msg55669311

[duplj30]

Using rx580 cclock 1160 and mclock 2150 what I've always used
Win 10 13 gpus
On eth not riceve errors
Use bat file
the problem may appear to be a beta of 5.3b

5.3b with ethermine it works but with my pool it doesn't want to know Carnus (v1.11.19)

most likely cause of errors in the pool
I have a similar situation on the pool cruxpool, however, in my example, connections to this one domain name led to connections to different IP addresses. When the connection was with one address there were errors, and when i connected to another server with the same domain name there were no errors. Try to reconnect several times by pressing the R key after errors appear, and then remember the IP address at which there will be no errors, if it does not help, change the pool until it is fixed

[Ursul0]

@Phoenix Miner so is there any chance you will release a version with option to somehow preallocate zil dag?

My 5700 and vegas seem to be unstable around reallocation (& time wasted), also as I apply tight timings(not from the miner) after the presumptive first dag loading doesn't help...