allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 01, 2014, 08:50:13 PM |
|
Bro, do you even root?
|
|
|
|
Bogart
Legendary
Offline
Activity: 966
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 04:32:50 AM |
|
I have an issue with one of my Ants where sometimes I find that it has stopped mining (blade LEDs are off), the ethernet LEDs are off, and the control board has the red LED on, and the green LED blinking at 1Hz (half a second on, half a second off). It is not accessible on the network.
Power off-then-on-again fixes it until the next time (usually days).
Any ideas on the cause or a solution are welcome.
|
"All safe deposit boxes in banks or financial institutions have been sealed... and may only be opened in the presence of an agent of the I.R.S." - President F.D. Roosevelt, 1933
|
|
|
BotwinBG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 11:06:34 AM |
|
I think my Antminer broke: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FRxuBFsZ.png&t=665&c=OuA9Fz39ZWOWQQ) Rebooted it once with same result. Do I need to shut it down for a longer period?
|
| AMEPAY | | | | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | │▌ | AMEPAY IEO
▄██████▄ ▀██████▄ █████████ ▀█████ ███████▀ ▀███ ██████▀ ▄█▄ ▀██ ██████▄ ▀█▀ ▄██ ███████▄ ▄███ █████████ ▄█████ ▀██████▀ ▄██████▀ | |
| │ | | AMEPAY LISTING
▐███▄ ████▌ ▐██████████▄ █████████████ ████▌ █████ ▐████ ▄████ ██████████▀ ▀█████▀▀ | |
| ▐│ | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ |
|
|
|
BotwinBG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 11:26:04 AM |
|
Now it does not even recognize the other blade: It is connected to a Corsair 520w power supply, will test with another one in a few hours.
|
| AMEPAY | | | | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | │▌ | AMEPAY IEO
▄██████▄ ▀██████▄ █████████ ▀█████ ███████▀ ▀███ ██████▀ ▄█▄ ▀██ ██████▄ ▀█▀ ▄██ ███████▄ ▄███ █████████ ▄█████ ▀██████▀ ▄██████▀ | |
| │ | | AMEPAY LISTING
▐███▄ ████▌ ▐██████████▄ █████████████ ████▌ █████ ▐████ ▄████ ██████████▀ ▀█████▀▀ | |
| ▐│ | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ |
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 11:26:10 AM |
|
Question regarding unit. Got it today however I see a 6in adapter for each modual can I put a 6 pin to this or is it still using the other ones with the screws on it.
|
|
|
|
BotwinBG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 11:47:00 AM |
|
Switched off and switched to a spare CoolerMaster SPH1050w . Bit of an overkill but it seems to work fine now.
|
| AMEPAY | | | | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | │▌ | AMEPAY IEO
▄██████▄ ▀██████▄ █████████ ▀█████ ███████▀ ▀███ ██████▀ ▄█▄ ▀██ ██████▄ ▀█▀ ▄██ ███████▄ ▄███ █████████ ▄█████ ▀██████▀ ▄██████▀ | |
| │ | | AMEPAY LISTING
▐███▄ ████▌ ▐██████████▄ █████████████ ████▌ █████ ▐████ ▄████ ██████████▀ ▀█████▀▀ | |
| ▐│ | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ |
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 11:52:21 AM |
|
Switched off and switched to a spare CoolerMaster SPH1050w . Bit of an overkill but it seems to work fine now.
did you cut wires off pc-e cable or use 6pin port on ant miner ?
|
|
|
|
BotwinBG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 12:03:58 PM |
|
Switched off and switched to a spare CoolerMaster SPH1050w . Bit of an overkill but it seems to work fine now.
did you cut wires off pc-e cable or use 6pin port on ant miner ? That unit is from a previous batch and has no 6pin port. The 6pin version are scheduled to be delivered today.
|
| AMEPAY | | | | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | │▌ | AMEPAY IEO
▄██████▄ ▀██████▄ █████████ ▀█████ ███████▀ ▀███ ██████▀ ▄█▄ ▀██ ██████▄ ▀█▀ ▄██ ███████▄ ▄███ █████████ ▄█████ ▀██████▀ ▄██████▀ | |
| │ | | AMEPAY LISTING
▐███▄ ████▌ ▐██████████▄ █████████████ ████▌ █████ ▐████ ▄████ ██████████▀ ▀█████▀▀ | |
| ▐│ | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ |
|
|
|
BotwinBG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 06:49:41 PM Last edit: January 02, 2014, 07:29:08 PM by BotwinBG |
|
A different problem this time. The second unit from batch 5 did not accept root as the password. So I pressed the reset button. Now it does not reply to anything. IP scanner does not show anything.
EDIT: a few more resets fixed it.
|
| AMEPAY | | | | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | │▌ | AMEPAY IEO
▄██████▄ ▀██████▄ █████████ ▀█████ ███████▀ ▀███ ██████▀ ▄█▄ ▀██ ██████▄ ▀█▀ ▄██ ███████▄ ▄███ █████████ ▄█████ ▀██████▀ ▄██████▀ | |
| │ | | AMEPAY LISTING
▐███▄ ████▌ ▐██████████▄ █████████████ ████▌ █████ ▐████ ▄████ ██████████▀ ▀█████▀▀ | |
| ▐│ | ▄▄█████████▄▄ ▄█████████████████▄ ▄█████████████████████▄ ▄█████████▀▀▄▀▀█████████▄ ▄████████▄▄█▀ ▀█▄▄████████▄ ████████ ▀▀█▄██▀▀▄████████ ████████ █ ▄ █ ▄▀▀▄████████ ████████ █ █ █ ▄▀▀▄████████ ▀█████████▄█ █ ▄██████████▀ ▀████████ ▀▀▀ ████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ |
|
|
|
ScaryHash
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 08:00:15 PM |
|
So how do you actually start this thing mining?
I logged into it, it's set for 192.168.1.4
I'm trying to apply my eligius pool at Pool 1 stratum+tcp://stratum.mining.eligius.st:3334
then I entered my address,
Then my password (no password required for eligius) so I just put in x.
Seems to just sit there and says applying changes to /etc/config/cgminer
But it never finishes...
HOw do you actually start it mining once it's configured?? Maybe I'm a total noob...
|
|
|
|
Miner99er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 09:25:16 PM |
|
I got mine with a broken S1 button, not sure what the hell it does but that why I'm posting. I logged into it once... changed it from 192.168.2.XX to 10.1.10.XX (my business network uses that ip range) and now I can't contact it whatsoever. Tried the reset trick by shorting pin ( https://bitcointalk.org/index.php?topic=348327.0, Post 23) as well as trying the IP scanner in this thread, no dice. Do I have to send the board back?
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 10:13:18 PM |
|
So how do you actually start this thing mining?
I logged into it, it's set for 192.168.1.4
I'm trying to apply my eligius pool at Pool 1 stratum+tcp://stratum.mining.eligius.st:3334
use ONLY stratum.mining.eligius.st:3334
|
|
|
|
Olly_K
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 02, 2014, 10:53:05 PM |
|
So how do you actually start this thing mining?
I logged into it, it's set for 192.168.1.4
I'm trying to apply my eligius pool at Pool 1 stratum+tcp://stratum.mining.eligius.st:3334
then I entered my address,
Then my password (no password required for eligius) so I just put in x.
Seems to just sit there and says applying changes to /etc/config/cgminer
But it never finishes...
HOw do you actually start it mining once it's configured?? Maybe I'm a total noob...
Your miner can't resolve your DNS address. Set it to 8.8.8.8 A lot of the problems on the page are covered in the first page of this topic.
|
|
|
|
ScaryHash
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 03, 2014, 12:55:43 AM |
|
Thanks for trying to help.
I can't even log into it anymore.
I logged into the address on top of the fan, and changed it to 192.168.1.4
Unfortunately, I didn't realized that was my wife's computer....
So, is there any way to reset this thing to the default address? I see this little black button on the network card...
Thanks.
|
|
|
|
Miner99er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 03, 2014, 01:00:01 AM |
|
I'm at the same spot as Scaryhash, any help would be appreciated.
|
|
|
|
miter_myles
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 03, 2014, 01:15:37 AM |
|
|
BTC - 1D7g5395bs7idApTx1KTXrfDW7JUgzx6Z5 LTC - LVFukQnCWUimBxZuXKqTVKy1L2Jb8kZasL
|
|
|
Miner99er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 03, 2014, 01:49:12 AM Last edit: January 03, 2014, 05:48:09 AM by Miner99er |
|
3rd time I've tried that, still don't work. ... le sigh. Working... futzing with the LAN interface, when WAN needed to be edited.
|
|
|
|
ScaryHash
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 03, 2014, 02:05:16 AM |
|
Ok ! Thanks for all the help ! It worked.
Ok, I think I even know what I did...
I downloaded the Advanced IP scanner, turned off the wife's computer. Then I ran the network scan with the IP scanner. It had somehow set itself to 192.168.1.99, after I had held down the little black reset button for 3 seconds.
Weird I know.
I realized it had started mining for the default pool in the settings, because the power backup alarm on my APC had gone off, as it was pulling (combined with the computers), more than it was rated for.
LOL.
So, I turned off the graphics cards which were sucking 200 wats for LTC mining, set the pool again, and it's happily mining.
If you can't log into it anymore, it's because of some IP conflict with your other computers/printers/whatever on the network, so it helps to try the IP scanner.
Hope my bumbling attempts help somebody...lol. Much appreciated to those who put up with my nOOb questions.
Happy New Year !
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 03, 2014, 02:37:02 AM |
|
Ok ! Thanks for all the help ! It worked.
Ok, I think I even know what I did...
I downloaded the Advanced IP scanner, turned off the wife's computer. Then I ran the network scan with the IP scanner. It had somehow set itself to 192.168.1.99, after I had held down the little black reset button for 3 seconds.
Weird I know.
I beleive that was the default set into the reset feature.
|
|
|
|
conv3rsion
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 03, 2014, 09:25:35 AM |
|
Ok ! Thanks for all the help ! It worked.
Ok, I think I even know what I did...
I downloaded the Advanced IP scanner, turned off the wife's computer. Then I ran the network scan with the IP scanner. It had somehow set itself to 192.168.1.99, after I had held down the little black reset button for 3 seconds.
Weird I know.
I beleive that was the default set into the reset feature. The reason its confusing is because the machine comes with an IP address that is 192.168.2.99, but after hitting the reset button the IP address becomes 192.168.1.99 Also some other new changes are made after hitting the reset button, such as (the fake) LAN is switched to DHCP. It turns out that using the reset button is a faster way to originally set the devices up, provided that 192.168.1.99 is open on your network.
|
|
|
|
|