[GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4

[sailem09]

Jenny is awesome ! 1-8-14 orders will ship out today there time apparently tracking will be available in 24 hours.

now is 2014-01-17 13:53,you will receive a ship number at about 2014-01-18 14:00

[madao]

When I tried messaging btmine.cs, message status just says pending...
What am I doing wrong?

[MaZo360]

Jenny is awesome ! 1-8-14 orders will ship out today there time apparently tracking will be available in 24 hours.

now is 2014-01-17 13:53,you will receive a ship number at about 2014-01-18 14:00

I have asked about the status of my 8/1 order yesterday, and was told it might still be in HK for some days. Email contact when very smooth until I asked for a refund (PayPal). Yet to hear back.

I'd be fine if I can be sure I get the miner within a few days, but I'm a bit fed up with the false promises / lack of communication.

[grumpy619]

Thanks. I'm kind of antsy now long does DHL take. The crazy part is once I get it running and its hashing away it won't make me feel any better I would just know I'm mining for bitcoin.

[FarmerOak]

Just a fair warning guys: I ran one of my miners at 1500Mhz for a few minutes and it blew two modules (of the 16). I'm hashing at 14/16 the rate, and two modules remain cold. No physical damage, they just don't fire up. If anyone knows how to diagnose or fix them, I'd love to hear it.

I'm sure I was dumb to try it, but I do find it strange that it blew out 2 modules.

[MaZo360]

Jenny is awesome ! 1-8-14 orders will ship out today there time apparently tracking will be available in 24 hours.

now is 2014-01-17 13:53,you will receive a ship number at about 2014-01-18 14:00

I have asked about the status of my 8/1 order yesterday, and was told it might still be in HK for some days. Email contact when very smooth until I asked for a refund (PayPal). Yet to hear back.

I'd be fine if I can be sure I get the miner within a few days, but I'm a bit fed up with the false promises / lack of communication.

Yesterday evening I was told they can refund PayPal users, but that they're short on Bitcoins. Today I'm being told no refund is possible and that I have to open a dispute with PayPal, as "their money is unavailable".

[robbcarpdm]

I get it

Paypal has most of their money if not all of it on freeze given the number for refunds....Paypal is making sure they dont get screwed.

So they have no working capital but our BTC.

Hence its gone.

If they ship the miners today then that works but they should be compensating everyone for two weeks o lost hashing.

On the poster with too bad chips.....the floating probably didnt go eveningly on the board and or simply you fried two chips......consider yourself luckiing if it was one FC you would be down much more than 20 gh

It probably doenst hurt for folks to check the thermal paste on heatsink given the rushed manufacturing.....any bear spots can be deadly now that they went from two heatsinks down to one.

Cheers

[Gologuzan]

got mine tracking today. ordered on 07.

as i mentioned earlyer they have taken big bite, and now they are struggling with it. but on a way to win.

[r1senfa17h]

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

[BeerPimp]

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

[Bhosted]

I got cgminer to recognize the Avalon after the dead tp-link. The problem I am seeing is it keeps saying 32 miners idle and then sending reset sequence. It shows all zeros and no fan turns on.

Any ideas?

 You need to add the following line to your bat file

--avalon-options 115200:24:10:D:1500:55

[r1senfa17h]

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

They had me listed as 1/9, but I paid 1/8.

[jacoo]

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

They had me listed as 1/9, but I paid 1/8.

Time difference

[madao]

For those of you still looking to get your machines, I just got off Skype with Jenny and had my January 9th order stricken.. Good news for anyone still looking to mine

[Pistachio]

I got cgminer to recognize the Avalon after the dead tp-link. The problem I am seeing is it keeps saying 32 miners idle and then sending reset sequence. It shows all zeros and no fan turns on.

Any ideas?

 You need to add the following line to your bat file

--avalon-options 115200:24:10:D:1500:55

Thanks, got this working but the main problem turned out to still be power related. It really does need a single rail with 50+ amps. It turns out I killed up three power supplies that just couldn't hack it. I plugged in a 750w single rail with 63a and one module fired right up. Two more 750w ordered and hopefully this will fix this problem. This is what I ordered http://www.amazon.com/NZXT-Hale82N-240-Pin-Non-modular-np-1bn-0750a-us/dp/B008RK9V46/ref=sr_1_3?ie=UTF8&qid=1389971266&sr=8-3&keywords=nzxt+750.

[mchu168]

I got cgminer to recognize the Avalon after the dead tp-link. The problem I am seeing is it keeps saying 32 miners idle and then sending reset sequence. It shows all zeros and no fan turns on.

Any ideas?

 You need to add the following line to your bat file

--avalon-options 115200:24:10:D:1500:55

Thanks, got this working but the main problem turned out to still be power related. It really does need a single rail with 50+ amps. It turns out I killed up three power supplies that just couldn't hack it. I plugged in a 750w single rail with 63a and one module fired right up. Two more 750w ordered and hopefully this will fix this problem. This is what I ordered http://www.amazon.com/NZXT-Hale82N-240-Pin-Non-modular-np-1bn-0750a-us/dp/B008RK9V46/ref=sr_1_3?ie=UTF8&qid=1389971266&sr=8-3&keywords=nzxt+750.

Are you running this off the USB port?  If so, could you point to a link on how to set this up.  I would love to run this off a Minepeon.  Sorry - feeling lazy today.

[Pistachio]

I don't have a good link but I can explain pretty quickly. Download cgminer and zadig (for windows). Plug in your Avalon directly from the main control board to your PC. Change the driver to winUSB. Click install and then run cgminer with
--avalon-options 115200:24:10:D:1500:55 from the command prompt.

[BeerPimp]

I received confirmation through Skype that 7 of the 14 units I purchased on 1/9 (their time) shipped today and that the rest will ship tomorrow.

Do they have you listed on the batches for 1/08 or 1/09 on the front page?

They had me listed as 1/9, but I paid 1/8.

Thanks for the info.  As stated it is the time difference.  But in the end we just want info on when miners are shipping.

[hephaist0s]

I had a 1/7 order, and I received tracking info today -- and the package is in motion.

[sikke]

I had a 1/7 order, and I received tracking info today -- and the package is in motion.

Same thing i got few orders coming. Have received tracking info and they are picked up by DHL. From professional point i have stuff coming from HK to Europe several parcels every week. These will board the plane in HK presumably tomorrow Saturday and land to DHL Leipzig Sunday. Mine will be on route to delivery to me monday. I have preapproved customs number with DHL.

Well see what happens. This is just my prediction.