fistsofgod
Newbie
Offline
Activity: 164
Merit: 0
|
 |
August 05, 2018, 06:33:45 AM |
|
Sometimes miner crashes and tries to restart:
" 14:06:42 CUDA: Device: 6 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:43 WARNING: Looks like GPU7 are stopped. Restarting... 14:06:43 INFO: GPU7 are restarted. 14:06:43 CUDA: Device: 7 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU0 are stopped. Restarting... 14:06:44 INFO: GPU0 are restarted. 14:06:44 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU1 are stopped. Restarting... 14:06:44 INFO: GPU1 are restarted. 14:06:44 CUDA: Device: 1 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU2 are stopped. Restarting... 14:06:44 INFO: GPU2 are restarted. 14:06:44 CUDA: Device: 2 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU3 are stopped. Restarting... 14:06:44 INFO: GPU3 are restarted. 14:06:44 CUDA: Device: 3 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:45 WARNING: Looks like GPU4 are stopped. Restarting... 14:06:45 INFO: GPU4 are restarted. 14:06:45 CUDA: Device: 4 Thread exited with message: "all CUDA-capable devices are busy or unavailable" "
I kill task manually and start the task again, then everything works fine
It would be very good if he himself began anew independently
windows 10, 8 cards : 6/1070 +2/1080ti drivers nvidia 01.06.2018 ver. 24.21.13.9811
I had this same problem and I decreased my OC until this stoppped happening. noticed my SOL/s stayed about the same also as i decreased. this is my run.bat, it will restart on errors and such: :restart @echo off TIMEOUT 3 miner.exe --algo 144_5 --pers BgoldPoW --server us-east.equihash-hub.miningpoolhub.com --port 20595 --user xxxx --pass x --pec --fee x --log 2 --eexit 1 ping 127.0.0.1 > nul goto :restart
|
|
|
|
rosalco
Newbie
Offline
Activity: 1
Merit: 0
|
 |
August 05, 2018, 09:11:54 AM |
|
hello, guys. yeah, i have 2 1060 gpus on windows 10. in verison 0.3 it works fine, but 0.4, 0.5 im take crushing error who caused reboot my farm with cool message - thread exited with message the launch timed out and was terminated. WAIDW? 
|
|
|
|
Zheko87
Newbie
Offline
Activity: 172
Merit: 0
|
 |
August 05, 2018, 09:33:11 AM |
|
How many sol/s per one 1066 on zhash algo gives 0.5 version?
|
|
|
|
baraday
Newbie
Offline
Activity: 20
Merit: 0
|
 |
August 05, 2018, 10:56:47 AM |
|
fukanoshi call his miner as a fastest one, anyone checked already ewbf VS fukanoshi?
funakoshi vs ewbf: tried on a 1080 ti, same OC settings, same pool, same coin (btcz) funakoshi 59-61 sol/s ewbf 69-71 sol/s
|
|
|
|
|
alexivan_58
Newbie
Offline
Activity: 4
Merit: 0
|
 |
August 05, 2018, 03:57:25 PM |
|
I had this same problem and I decreased my OC until this stoppped happening. noticed my SOL/s stayed about the same also as i decreased.
Yes, it's because of the OC, but the idea in message, the miner himself could restart, and not do it manually. If the restart can be done by closing / execute the program, then this can be implemented inside the program itself.
|
|
|
|
MineOrDie
Jr. Member
Offline
Activity: 75
Merit: 1
|
 |
August 05, 2018, 06:01:32 PM |
|
Any possible improvements for 96_5, or this is the limit?
|
|
|
|
Regulater
Member

Offline
Activity: 273
Merit: 12
|
 |
August 06, 2018, 02:18:09 AM |
|
I am having issues with the API loading. It states the API failed every so often.
|
|
|
|
konqueror
Member

Offline
Activity: 99
Merit: 10
|
 |
August 06, 2018, 08:10:23 AM |
|
I am having issues with the API loading. It states the API failed every so often.
You need to wait a little bit more when restarting miner. I suppose the API listen process needs more time to close connections.
|
|
|
|
Salem87
Newbie
Offline
Activity: 4
Merit: 0
|
 |
August 06, 2018, 08:10:57 AM |
|
dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
|
|
|
|
Dr_Victor
|
 |
August 06, 2018, 08:38:33 AM |
|
dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
Zcash uses Equihash-algo. Try ZecMiner64 or EWBF miner: miner --server us-east.equihash-hub.miningpoolhub.com --user username.workername --pass x --port 20570
|
yobit.net is banned from signatures
|
|
|
Salem87
Newbie
Offline
Activity: 4
Merit: 0
|
 |
August 06, 2018, 08:46:53 AM |
|
dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
Zcash uses Equihash-algo. Try ZecMiner64 or EWBF miner: miner --server us-east.equihash-hub.miningpoolhub.com --user username.workername --pass x --port 20570 thanks for your help but may i know what algo shall i use in EWBF i mean like 210_9 or something , because the new one i must put the alg number on it right thanks again for your help
|
|
|
|
darkneorus
Jr. Member
Offline
Activity: 238
Merit: 3
|
 |
August 06, 2018, 08:52:56 AM |
|
dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
Zcash uses Equihash-algo. Try ZecMiner64 or EWBF miner: miner --server us-east.equihash-hub.miningpoolhub.com --user username.workername --pass x --port 20570 thanks for your help but may i know what algo shall i use in EWBF i mean like 210_9 or something , because the new one i must put the alg number on it right thanks again for your help * Solver for equihash 200,9 has been deleted.
|
|
|
|
Salem87
Newbie
Offline
Activity: 4
Merit: 0
|
 |
August 06, 2018, 08:58:32 AM |
|
dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
Zcash uses Equihash-algo. Try ZecMiner64 or EWBF miner: miner --server us-east.equihash-hub.miningpoolhub.com --user username.workername --pass x --port 20570 thanks for your help but may i know what algo shall i use in EWBF i mean like 210_9 or something , because the new one i must put the alg number on it right thanks again for your help * Solver for equihash 200,9 has been deleted.
 ok what to do. will wait so. but i like EWBF
|
|
|
|
SchroedingerC
Newbie
Offline
Activity: 47
Merit: 0
|
 |
August 06, 2018, 11:37:51 AM |
|
fukanoshi call his miner as a fastest one, anyone checked already ewbf VS fukanoshi?
Funakoshi is slower than EWBF 0.3 on my RIGs.
|
|
|
|
Dr_Victor
|
 |
August 06, 2018, 11:47:21 AM |
|
dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
Zcash uses Equihash-algo. Try ZecMiner64 or EWBF miner: miner --server us-east.equihash-hub.miningpoolhub.com --user username.workername --pass x --port 20570 thanks for your help but may i know what algo shall i use in EWBF i mean like 210_9 or something , because the new one i must put the alg number on it right thanks again for your help * Solver for equihash 200,9 has been deleted.
 ok what to do. will wait so. but i like EWBF Use EWBF and enjoy https://bitcointalk.org/index.php?topic=1707546.0
|
yobit.net is banned from signatures
|
|
|
EWBF_ (OP)
|
 |
August 06, 2018, 11:48:24 AM |
|
Yes, except --solver option. Any possible improvements for 96_5, or this is the limit?
It is difficult, but possible. dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
This miner does not support equihash 200,9. I also think a couple of months, and it will be unprofitable for the GPU because of the asic's. Sometimes miner crashes and tries to restart:
" 14:06:42 CUDA: Device: 6 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:43 WARNING: Looks like GPU7 are stopped. Restarting... 14:06:43 INFO: GPU7 are restarted. 14:06:43 CUDA: Device: 7 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU0 are stopped. Restarting... 14:06:44 INFO: GPU0 are restarted. 14:06:44 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU1 are stopped. Restarting... 14:06:44 INFO: GPU1 are restarted. 14:06:44 CUDA: Device: 1 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU2 are stopped. Restarting... 14:06:44 INFO: GPU2 are restarted. 14:06:44 CUDA: Device: 2 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU3 are stopped. Restarting... 14:06:44 INFO: GPU3 are restarted. 14:06:44 CUDA: Device: 3 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:45 WARNING: Looks like GPU4 are stopped. Restarting... 14:06:45 INFO: GPU4 are restarted. 14:06:45 CUDA: Device: 4 Thread exited with message: "all CUDA-capable devices are busy or unavailable" "
I kill task manually and start the task again, then everything works fine
It would be very good if he himself began anew independently
windows 10, 8 cards : 6/1070 +2/1080ti drivers nvidia 01.06.2018 ver. 24.21.13.9811
This is actually a common problem, you need to make sure that your overclocking is stable, note that different algorithms load gpu in different ways. Thus, stable overclocking on one algorithm does not guarantee stability for others. Loving the higher hashrate
BUT STILL HAVING PROBLEMS WITH 12 CARD RIGS, it runs fine for about 5 minutes then crashes, GPU dump errors, help please, using SMOS
With fewer GPUs, no problems?
|
|
|
|
TarzanCrazy
Newbie
Offline
Activity: 1
Merit: 0
|
 |
August 06, 2018, 01:12:34 PM |
|
Hi, My first post here. Is it possible to mine from magnificentpool with EWBF miner, directly to my wallet adress. I created a Jaxx wallet which is on my PC? What would be the .bat command. If it is not possible what kind of wallet do I need and what would the .bat command look like. Best regards
|
|
|
|
umine
|
 |
August 06, 2018, 01:16:53 PM |
|
hello, guys. yeah, i have 2 1060 gpus on windows 10. in verison 0.3 it works fine, but 0.4, 0.5 im take crushing error who caused reboot my farm with cool message - thread exited with message the launch timed out and was terminated. WAIDW?  I had practically the same problem with EWBF v0.5. On v0.4 everything works fine without reboot/restart for weeks. But with v 0.5 my miner crashed every hour. I ran each GPU in separate miner process and found which one GPU that crashed miner software. After that I just little reduce overclocking of that GPU and my rigs works well. I think the problem appears due to v0.5 uses more GPU (and power also) resources than older versions. If you think about stability just remember the first Equihash genoil miner 
|
|
|
|
Scrubzer0
Newbie
Offline
Activity: 13
Merit: 0
|
 |
August 06, 2018, 05:31:30 PM |
|
Yes, except --solver option. Any possible improvements for 96_5, or this is the limit?
It is difficult, but possible. dear i know maybe its stupid question but whats the alg for Zcash and whats the miner command line will be . thanks and sorry again
This miner does not support equihash 200,9. I also think a couple of months, and it will be unprofitable for the GPU because of the asic's. Sometimes miner crashes and tries to restart:
" 14:06:42 CUDA: Device: 6 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:43 WARNING: Looks like GPU7 are stopped. Restarting... 14:06:43 INFO: GPU7 are restarted. 14:06:43 CUDA: Device: 7 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU0 are stopped. Restarting... 14:06:44 INFO: GPU0 are restarted. 14:06:44 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU1 are stopped. Restarting... 14:06:44 INFO: GPU1 are restarted. 14:06:44 CUDA: Device: 1 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU2 are stopped. Restarting... 14:06:44 INFO: GPU2 are restarted. 14:06:44 CUDA: Device: 2 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:44 WARNING: Looks like GPU3 are stopped. Restarting... 14:06:44 INFO: GPU3 are restarted. 14:06:44 CUDA: Device: 3 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 14:06:45 WARNING: Looks like GPU4 are stopped. Restarting... 14:06:45 INFO: GPU4 are restarted. 14:06:45 CUDA: Device: 4 Thread exited with message: "all CUDA-capable devices are busy or unavailable" "
I kill task manually and start the task again, then everything works fine
It would be very good if he himself began anew independently
windows 10, 8 cards : 6/1070 +2/1080ti drivers nvidia 01.06.2018 ver. 24.21.13.9811
This is actually a common problem, you need to make sure that your overclocking is stable, note that different algorithms load gpu in different ways. Thus, stable overclocking on one algorithm does not guarantee stability for others. Loving the higher hashrate
BUT STILL HAVING PROBLEMS WITH 12 CARD RIGS, it runs fine for about 5 minutes then crashes, GPU dump errors, help please, using SMOS
With fewer GPUs, no problems? No problems with fewer GPU's I have 5 rigs that are 6-9 cards each and one 12 card rig, my 12 card has never fully worked on this new EWBF, I tried v0.2 and 3 and had gpu 10 and 11 crash over and over, v0.5 will sometimes only boot gpu 0 - 9 and run perfectly fine for days, but as soon as I reboot and get all 11-12 cards running it crashes within 10-15 minutes, I lowered OC to 50 core 200 mem and still crashes they are 1070ti, all my other 1070ti work 100% with 200 core 600 memory I just rebooted again and it only booted gpu 0 - 9 so only 10 cards are working but its stable so I will leave it on for now....
|
|
|
|
|