SouthWEBA
Copper Member
Newbie
Offline
Activity: 5
Merit: 0
|
 |
July 06, 2018, 09:01:53 AM |
|
Hello @EWBF_
hardware:
motherboard: asrock h110 pro btc (13gpu) memory : 4gb cpu Celeron 3930 UNIX - Fedora
Version 0.3.4b working super to ZEC
video cards: 13 gtx EVGA SC2 1080Ti
issue:
gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. May be build the miner to detect all gpus at the very start?
I tested to start 2 miner
cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12
and is very very very slow process detected card :-( and crashed EWBF
Please help me ASAP i have +- 3000 card
13x1070 card working normal
Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version! This version not working :-( I use CUDA 8 06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version Added cuda 8 version. Super, thx! All card started normal and working. I have new problem :-( Load average very big now 27 - 28 please check screen https://c2n.me/3Vhrpka.pngVersion 0.3.4b maximum load average 5-6 Because of this load not working normal command "nvidia-smi -q | grep miner | wc -l" and WathDog reboot all ferms :-(
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
|
|
|
AlexBeard
Newbie
Offline
Activity: 12
Merit: 0
|
 |
July 06, 2018, 09:06:10 AM |
|
I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me? 
|
|
|
|
gsanjin
Member

Offline
Activity: 191
Merit: 12
|
 |
July 06, 2018, 09:13:34 AM |
|
I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Are you sure you added required parameter --pers BgoldPoW?
|
|
|
|
AlexBeard
Newbie
Offline
Activity: 12
Merit: 0
|
 |
July 06, 2018, 09:23:03 AM |
|
I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Are you sure you added required parameter --pers BgoldPoW? Yes I am sure.
|
|
|
|
gsanjin
Member

Offline
Activity: 191
Merit: 12
|
 |
July 06, 2018, 09:43:38 AM |
|
I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Are you sure you added required parameter --pers BgoldPoW? Yes I am sure. Just tried mining with this and it works fine for me (v0.3 of miner) miner --algo 144_5 --pers BgoldPoW --server btg.suprnova.cc --user username.worker --pass 1 --port 8866
|
|
|
|
AlexBeard
Newbie
Offline
Activity: 12
Merit: 0
|
 |
July 06, 2018, 09:57:39 AM |
|
I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Are you sure you added required parameter --pers BgoldPoW? Yes I am sure. Just tried mining with this and it works fine for me (v0.3 of miner) miner --algo 144_5 --pers BgoldPoW --server btg.suprnova.cc --user username.worker --pass 1 --port 8866 Thanks for your help, I feel stupid now I was typing bad --pers BgoldPow not --pers BgoldPoW 
|
|
|
|
ripcurrent
Member

Offline
Activity: 160
Merit: 10
|
 |
July 06, 2018, 01:10:30 PM |
|
I keep getting this error any ideas?
: "unspecified launch failure" 09:09:08 CUDA: Device: 0 Thread exited with message: "unspecified launch failure" 09:09:08 CUDA: Device: 1 Thread exited with message: "unspecified launch failure" 09:09:08 CUDA: Device: 3 Thread exited with message: "unspecified launch failure" 09:09:08 CUDA: Device: 4 Thread exited with message: "all CUDA-capable devices are busy or unavailable" 09:09:08 CUDA: Device: 5 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
|
|
|
|
akrazojub
Newbie
Offline
Activity: 3
Merit: 0
|
 |
July 06, 2018, 01:15:49 PM |
|
Running EWBF 3 144_5 for BTG and slowly ramping up my 6 MSI 1080 ti Gaming X in values. Currently at +50 CORE +450 @ 68% Power and getting about 50-53 sols per card.
I have never been able to get my MSI's to do much more than +75 CORE +500 MEM at 68% without losing stability and having a card crash. (I have mined BTG, ZEN, and RVN with EWBF, CCMINER, DTSM)
Anyone else have experience with these cards? Is my experience typical or am I doing it wrong?
|
|
|
|
farfui
Newbie
Offline
Activity: 26
Merit: 0
|
 |
July 06, 2018, 03:11:03 PM |
|
for btg ram + 100 - 150 and more core clock
|
|
|
|
hogwash.89m
Newbie
Offline
Activity: 32
Merit: 0
|
 |
July 06, 2018, 10:34:42 PM |
|
Running EWBF 3 144_5 for BTG and slowly ramping up my 6 MSI 1080 ti Gaming X in values. Currently at +50 CORE +450 @ 68% Power and getting about 50-53 sols per card.
I have never been able to get my MSI's to do much more than +75 CORE +500 MEM at 68% without losing stability and having a card crash. (I have mined BTG, ZEN, and RVN with EWBF, CCMINER, DTSM)
Anyone else have experience with these cards? Is my experience typical or am I doing it wrong?
I got one MSI 1080 ti Gaming (w/o X), basically yours have higher clocks out of box, so you probably can't achieve higher clocks than that, ofc. if you have plenty of spare PSU power (20%+), voltages are stable and rest of rig is stable. Mine I got clocked on +170 CORE + 540 MEM and PL ~75% (+5/-5) rock stable with bunch of 1080 in rig. Also it depends on algo, chip sample luck etc. Like Lyra2z is mainly using just core, so clocks is doing maximum boost (2000+ Mhz) and then I'm find that +150 CORE is stable.
|
|
|
|
MrPlus
|
 |
July 07, 2018, 03:52:02 PM |
|
NPlusMiner added support of equihash192 in 4.0.1 using EWBF 0.34.0 users will receive it through AutoUpdate. AutoUpdate will not activate the algo by default. Add it in config if you want to mine it. https://github.com/MrPlusGH/NPlusMiner/releases
|
|
|
|
CarlOrff
|
 |
July 07, 2018, 10:16:55 PM |
|
Running EWBF 3 144_5 for BTG and slowly ramping up my 6 MSI 1080 ti Gaming X in values. Currently at +50 CORE +450 @ 68% Power and getting about 50-53 sols per card.
I have never been able to get my MSI's to do much more than +75 CORE +500 MEM at 68% without losing stability and having a card crash. (I have mined BTG, ZEN, and RVN with EWBF, CCMINER, DTSM)
Anyone else have experience with these cards? Is my experience typical or am I doing it wrong?
With MSI 1080Ti, I am at +175 core and +350 mem @170 W in the smi (135 W real) : stable during weeks (but not 178 at core, unstable). Ubuntu use, of course.
|
Bitcoin + privacy respect = BitcoinZ ( topic BitcoinZ) The only decentralized crypto that complements Bitcoin on privacy. You missed Bitcoin in 2009 ? Do not miss BitcoinZ in 2018 !
|
|
|
74hawksfan
Newbie
Offline
Activity: 21
Merit: 0
|
 |
July 08, 2018, 01:48:04 AM |
|
It doesn't seem that EWBF matches either Device Manager, MSI AB, or GPUz, is there a way to determine what card is what? Been trying to overclock/undervolt but I can't seem to figure out which card errors out so I'm just shooting in the dark :-)
|
|
|
|
ComputerGenie
|
 |
July 08, 2018, 03:11:36 AM |
|
It doesn't seem that EWBF matches either Device Manager, MSI AB, or GPUz, is there a way to determine what card is what? Been trying to overclock/undervolt but I can't seem to figure out which card errors out so I'm just shooting in the dark :-)
Did they take the fan settings out of Afterburner? 
|
If you have to ask "why?", you wouldn`t understand my answer. Always be on the look out, because you never know when you'll be stalked by hit-men that eat nothing but cream cheese....
|
|
|
74hawksfan
Newbie
Offline
Activity: 21
Merit: 0
|
 |
July 08, 2018, 04:23:44 AM |
|
If you mean did I try to differentiate the cards via fan setting then yes, but I have several water cooled cards that the MSI settings won't change the fan on :-(
Thank you for the suggestion though!
|
|
|
|
sergioccolb3
Newbie
Offline
Activity: 11
Merit: 0
|
 |
July 08, 2018, 07:46:07 AM |
|
Hello. I have 8 videocards Nvidia Tesla V100. But can´t mine BTG. %100 shares rejected. With Zcash working perfect. I have SO Centos 7. Please check and sorry for me basic english. Thanks.
|
|
|
|
gsanjin
Member

Offline
Activity: 191
Merit: 12
|
 |
July 08, 2018, 09:35:15 AM |
|
Hello. I have 8 videocards Nvidia Tesla V100. But can´t mine BTG. %100 shares rejected. With Zcash working perfect. I have SO Centos 7. Please check and sorry for me basic english. Thanks.
If you just read posts on this very same forum page you could find possible answer - https://bitcointalk.org/index.php?topic=4466962.msg41624820#msg41624820
|
|
|
|
sergioccolb3
Newbie
Offline
Activity: 11
Merit: 0
|
 |
July 08, 2018, 12:37:54 PM |
|
yes. I already read all the pages of this topic and I made sure that everything was correct but it follows the same problem. Only with version 0.3.4b it happens to me (all previous versions give me an error of "0 S / s"). Right now I am mining ZEC but if I could BTG it would be much more profitable 
|
|
|
|
farfui
Newbie
Offline
Activity: 26
Merit: 0
|
 |
July 08, 2018, 01:00:12 PM |
|
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 miner --algo 144_5 --pers BgoldPoW --server btg.suprnova.cc --port 8866 --user (username) --pass (password) pause
|
|
|
|
akuci
|
 |
July 08, 2018, 05:02:47 PM |
|
Please add version number in the title please.
|
|
|
|
|