lolMiner 1.64: Fastest Kaspa miner in market

[TravelFrog]

Thanks Lolliedieb for the great work, I would like to request for BitcoinRm. This new coin is using Equihash 144_5 algo. Looking forward for your good news. Thanks in advance.

[entryboy]

lolminer results 0.43 with my undervoltaged amd cards ->> BTG

Vega 64 LC (XFX) = 35 sol/s (PWR= -30% / RAM = 1060MHz) (2 pieces = 510W)
RX480 (XFX black)= 18 sol/s (CLK=1160 P-Stage=4) (4 pieces = 490W)
fury (x -> **) = 25 sol/s    (** 2 x pro duo = 4 x fury = 100 sol/s @ 670W >> undervoltage 950 MHz/-25%/1,05V)

not profitable, all together need 1670 Watts (2x Vega 64 LC + 4x RX480 + 2x Radeo Pro Duo =>> 270 sol/s).

[Lolliedieb]

Thanks Lolliedieb, working great as usual. I'm still mining away on HEPTA with my vega/rx570 rig. I have a request, and not sure if it's possible, but I notice that my pool rated efficiency goes down as I start undervolting the cards (I presume from bad blocks I'm sending in?). Is there any way we can get some sort of percentage of valid results from your internal checks for each of the cards that you display sol/s on? Something I could use to tell if I've undervolted too far on one card or if any particular card is returning more bad blocks  than another? Is that even possible?

Just a thought. Otherwise, I'm always happy to see any performance improvement that you could gain from future patches!

Thanks,
Cyg

edit: Also, would there be any benefit to adding a CPU option to the miner? I'm not sure how many sol/s we could expect from it but I feel like I need the cpu on this rig working towards something instead of sitting idle... 

Theoretically the miner can run on CPU - currently this is disabled (it only sees GPU devices), but for any CPU where there is an OpenCL driver it could run. Maybe I enable this experimentally.
As for the checks: in release version I disable all checks and pray for the algorithm to work correctly, since else CPU load would be very high. There are rare cases where flipping memory bits can invalidate a result or make the miner stuck, but also rare cases in which the miner can produce a faulty share. I will try to reduce this cases in new code.

Thanks Lolliedieb for the great work, I would like to request for BitcoinRm. This new coin is using Equihash 144_5 algo. Looking forward for your good news. Thanks in advance.

Thanks for mentioning it, I will add it in next version.

lolminer results 0.43 with my undervoltaged amd cards ->> BTG

Vega 64 LC (XFX) = 35 sol/s (PWR= -30% / RAM = 1060MHz) (2 pieces = 510W)
RX480 (XFX black)= 18 sol/s (CLK=1160 P-Stage=4) (4 pieces = 490W)
fury (x -> **) = 25 sol/s    (** 2 x pro duo = 4 x fury = 100 sol/s @ 670W >> undervoltage 950 MHz/-25%/1,05V)

not profitable, all together need 1670 Watts (2x Vega 64 LC + 4x RX480 + 2x Radeo Pro Duo =>> 270 sol/s).

For the Vega it would make sense reducing core a bit, but keep memory up. Then undervolt the core, so the card does not throttle clocks due to running into power target. Similar for the RX series. I heard someone to have about 19 sol/s @ 95W on 480 - with some uv that should be possible and would look much better.



By the way current status:
First of the 6 new GPU codes went today from development to testing - but I will not tell you which Well its one of the Nvidia codes. Later today then start of the corresponding AMD codes.
Further this week SafeCash will rebrand to Genesis (GENX) including new personalization string. I plan to update lolMiner at the end of the week with the new strings (and BitcoinRm) plus some bug fixes (this command line stuff with = sign and one sources of 0 sol/s but for 192/7 on AMD).
See you then and keep posting your wishes and suggestions

[cryptomaxsun]

It would be convenient to run the miner using the .bat file.
The conf.file is not very convenient to use.

[UselessGuru]

It would be convenient to run the miner using the .bat file.
The conf.file is not very convenient to use.

You can.... just pass all options as command line parameters like [-parameter]=[Value]

[UselessGuru]

Feature request for next version:

Please allow for different config files, e.g. -CONFIGFILE=[json file]

This will allow for easy inclusion in programs like www.MultiPoolMiner.io

[Lolliedieb]

Feature request for nex version:

Please allow for different config files, e.g. -CONFIGFILE=[json file]

This will allow for easy inclusion in programs like www.MultiPoolMiner.io

You do not need to wait, the parameter for this is -usercfg=<pathToFile> as described bottom of page 2 of the manual

[UselessGuru]

Feature request for next version:

Please allow for different config files, e.g. -CONFIGFILE=[json file]

This will allow for easy inclusion in programs like www.MultiPoolMiner.io

You do not need to wait, the parameter for this is -usercfg=<pathToFile> as described bottom of page 2 of the manual

Did not see this! Thank you!

[john1010]

Glad to see that the team continue their development to improve this miner, I used this recently to mine MNX, but seems the difficulty of MNX is climbed so high and not profitable, I hope that this version may add additional algo and coin to mine. Great job to lolMiner Developer!

[a7853z]

Hi, I am a developer of Bitcoin Candy  (official website is cdy.one), can you add support for this coin?   we are using Equihash 144_5 with pers CandyPoW.

[Quake4]

Lolliedieb

Im wtite pm with log of amd util.

[BigHarryArmsi]

I set up a friend with LolMiner a couple of days ago. Running fine and smiling except his miner has colors and mine is black and white. Was there an upgrade or am I missing something? Thanks.

[Quake4]

Lolliedieb

One RX 580 4Gb isnt worked.
In system: Intel HD + RX580

run benchmark.bat

Code:

@echo off

setlocal enableDelayedExpansion


setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

lolMiner.exe -benchmark=MNX
lolMiner.exe -benchmark=BTG
lolMiner.exe -benchmark=ZER

timeout 10

Output (setx is success on russian):

Code:

Уcпex. Укaзaннoe знaчeниe coxpaнeнo.

Уcпex. Укaзaннoe знaчeниe coxpaнeнo.

Уcпex. Укaзaннoe знaчeниe coxpaнeнo.

Уcпex. Укaзaннoe знaчeниe coxpaнeнo.

Уcпex. Укaзaннoe знaчeниe coxpaнeнo.
-------------------------------------------------
             Welcome to lolMiner 0.43

   This software is only meant for pool mining
with the Equihash 96.5, 144.5 or 192.7 algorithm

         Made by Lolliedieb, August 2018
-------------------------------------------------
Warning: No user profile defined in command line (-profile=<profileName> missing)
Using only DEFAULT section and command line input
lolMiner is configured to mine MinexCoin(MNX), Equihash 96.5
Setup Miner...
Using device with id 0 (Radeon RX 580 Series)
Warning: Your device with id 0 is currently not supported by lolMiner or by the specific algorithm you selecte
d.
Error: lolMiner does not support any of the detected / selected devices algorithms on the selected algorithm.
-------------------------------------------------
             Welcome to lolMiner 0.43

   This software is only meant for pool mining
with the Equihash 96.5, 144.5 or 192.7 algorithm

         Made by Lolliedieb, August 2018
-------------------------------------------------
Warning: No user profile defined in command line (-profile=<profileName> missing)
Using only DEFAULT section and command line input
lolMiner is configured to mine Bitcoin Gold(BTG), Equihash 144.5
Setup Miner...
Using device with id 0 (Radeon RX 580 Series)
Warning: Your device with id 0 is currently not supported by lolMiner or by the specific algorithm you selecte
d.
Error: lolMiner does not support any of the detected / selected devices algorithms on the selected algorithm.
-------------------------------------------------
             Welcome to lolMiner 0.43

   This software is only meant for pool mining
with the Equihash 96.5, 144.5 or 192.7 algorithm

         Made by Lolliedieb, August 2018
-------------------------------------------------
Warning: No user profile defined in command line (-profile=<profileName> missing)
Using only DEFAULT section and command line input
lolMiner is configured to mine Zero(ZER), Equihash 192.7
Setup Miner...
Using device with id 0 (Radeon RX 580 Series)
Warning: Your device with id 0 is currently not supported by lolMiner or by the specific algorithm you selecte
d.
Error: lolMiner does not support any of the detected / selected devices algorithms on the selected algorithm.

Bpeмя oжидaния  8 ceк., нaжмитe любyю клaвишy для пpoдoлжeния ...

clinfo.exe:

Code:

Number of platforms:				 2
  Platform Profile:				 FULL_PROFILE
  Platform Version:				 OpenCL 1.2 
  Platform Name:				 Intel(R) OpenCL
  Platform Vendor:				 Intel(R) Corporation
  Platform Extensions:				 cl_khr_fp64 cl_khr_icd cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_byte_addressable_store cl_intel_printf cl_ext_device_fission cl_intel_exec_by_local_thread cl_khr_gl_sharing cl_intel_dx9_media_sharing cl_khr_dx9_media_sharing cl_khr_d3d11_sharing
  Platform Profile:				 FULL_PROFILE
  Platform Version:				 OpenCL 2.1 AMD-APP (2671.3)
  Platform Name:				 AMD Accelerated Parallel Processing
  Platform Vendor:				 Advanced Micro Devices, Inc.
  Platform Extensions:				 cl_khr_icd cl_khr_d3d10_sharing cl_khr_d3d11_sharing cl_khr_dx9_media_sharing cl_amd_event_callback cl_amd_offline_devices 


  Platform Name:				 Intel(R) OpenCL
Number of devices:				 1
  Device Type:					 CL_DEVICE_TYPE_CPU
  Vendor ID:					 8086h
  Max compute units:				 4
  Max work items dimensions:			 3
    Max work items[0]:				 1024
    Max work items[1]:				 1024
    Max work items[2]:				 1024
  Max work group size:				 1024
  Preferred vector width char:			 1
  Preferred vector width short:			 1
  Preferred vector width int:			 1
  Preferred vector width long:			 1
  Preferred vector width float:			 1
  Preferred vector width double:		 1
  Native vector width char:			 16
  Native vector width short:			 8
  Native vector width int:			 4
  Native vector width long:			 2
  Native vector width float:			 8
  Native vector width double:			 4
  Max clock frequency:				 3200Mhz
  Address bits:					 64
  Max memory allocation:			 2063415296
  Image support:				 Yes
  Max number of images read arguments:		 480
  Max number of images write arguments:		 480
  Max image 2D width:				 16384
  Max image 2D height:				 16384
  Max image 3D width:				 2048
  Max image 3D height:				 2048
  Max image 3D depth:				 2048
  Max samplers within kernel:			 480
  Max size of kernel argument:			 3840
  Alignment (bits) of base address:		 1024
  Minimum alignment (bytes) for any datatype:	 128
  Single precision floating point capability
    Denorms:					 Yes
    Quiet NaNs:					 Yes
    Round to nearest even:			 Yes
    Round to zero:				 No
    Round to +ve and infinity:			 No
    IEEE754-2008 fused multiply-add:		 No
  Cache type:					 Read/Write
  Cache line size:				 64
  Cache size:					 262144
  Global memory size:				 8253661184
  Constant buffer size:				 131072
  Max number of constant args:			 480
  Local memory type:				 Global
  Local memory size:				 32768
  Kernel Preferred work group size multiple:	 128
  Error correction support:			 0
  Unified memory for Host and Device:		 1
  Profiling timer resolution:			 320
  Device endianess:				 Little
  Available:					 Yes
  Compiler available:				 Yes
  Execution capabilities:				 
    Execute OpenCL kernels:			 Yes
    Execute native function:			 Yes
  Queue on Host properties:				 
    Out-of-Order:				 Yes
    Profiling :					 Yes
  Platform ID:					 0000000000329480
  Name:						         Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz
  Vendor:					 Intel(R) Corporation
  Device OpenCL C version:			 OpenCL C 1.2 
  Driver version:				 3.0.1.10891
  Profile:					 FULL_PROFILE
  Version:					 OpenCL 1.2 (Build 76427)
  Extensions:					 cl_khr_fp64 cl_khr_icd cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_byte_addressable_store cl_intel_printf cl_ext_device_fission cl_intel_exec_by_local_thread cl_khr_gl_sharing cl_intel_dx9_media_sharing cl_khr_dx9_media_sharing cl_khr_d3d11_sharing 


  Platform Name:				 AMD Accelerated Parallel Processing
Number of devices:				 1
  Device Type:					 CL_DEVICE_TYPE_GPU
  Vendor ID:					 1002h
  Board name:					 Radeon RX 580 Series
  Device Topology:				 PCI[ B#1, D#0, F#0 ]
  Max compute units:				 36
  Max work items dimensions:			 3
    Max work items[0]:				 1024
    Max work items[1]:				 1024
    Max work items[2]:				 1024
  Max work group size:				 256
  Preferred vector width char:			 4
  Preferred vector width short:			 2
  Preferred vector width int:			 1
  Preferred vector width long:			 1
  Preferred vector width float:			 1
  Preferred vector width double:		 1
  Native vector width char:			 4
  Native vector width short:			 2
  Native vector width int:			 1
  Native vector width long:			 1
  Native vector width float:			 1
  Native vector width double:			 1
  Max clock frequency:				 1402Mhz
  Address bits:					 64
  Max memory allocation:			 4026531840
  Image support:				 Yes
  Max number of images read arguments:		 128
  Max number of images write arguments:		 64
  Max image 2D width:				 16384
  Max image 2D height:				 16384
  Max image 3D width:				 2048
  Max image 3D height:				 2048
  Max image 3D depth:				 2048
  Max samplers within kernel:			 16
  Max size of kernel argument:			 1024
  Alignment (bits) of base address:		 2048
  Minimum alignment (bytes) for any datatype:	 128
  Single precision floating point capability
    Denorms:					 No
    Quiet NaNs:					 Yes
    Round to nearest even:			 Yes
    Round to zero:				 Yes
    Round to +ve and infinity:			 Yes
    IEEE754-2008 fused multiply-add:		 Yes
  Cache type:					 Read/Write
  Cache line size:				 64
  Cache size:					 16384
  Global memory size:				 4294967296
  Constant buffer size:				 4026531840
  Max number of constant args:			 8
  Local memory type:				 Scratchpad
  Local memory size:				 32768
  Max pipe arguments:				 16
  Max pipe active reservations:			 16
  Max pipe packet size:				 4026531840
  Max global variable size:			 3623878656
  Max global variable preferred total size:	 4294967296
  Max read/write image args:			 64
  Max on device events:				 1024
  Queue on device max size:			 8388608
  Max on device queues:				 1
  Queue on device preferred size:		 262144
  SVM capabilities:				 
    Coarse grain buffer:			 Yes
    Fine grain buffer:				 Yes
    Fine grain system:				 No
    Atomics:					 No
  Preferred platform atomic alignment:		 0
  Preferred global atomic alignment:		 0
  Preferred local atomic alignment:		 0
  Kernel Preferred work group size multiple:	 64
  Error correction support:			 0
  Unified memory for Host and Device:		 0
  Profiling timer resolution:			 1
  Device endianess:				 Little
  Available:					 Yes
  Compiler available:				 Yes
  Execution capabilities:				 
    Execute OpenCL kernels:			 Yes
    Execute native function:			 No
  Queue on Host properties:				 
    Out-of-Order:				 No
    Profiling :					 Yes
  Queue on Device properties:				 
    Out-of-Order:				 Yes
    Profiling :					 Yes
  Platform ID:					 000007FED9F13FD0
  Name:						 Ellesmere
  Vendor:					 Advanced Micro Devices, Inc.
  Device OpenCL C version:			 OpenCL C 2.0 
  Driver version:				 2671.3
  Profile:					 FULL_PROFILE
  Version:					 OpenCL 2.0 AMD-APP (2671.3)
  Extensions:					 cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_fp16 cl_khr_gl_sharing cl_khr_gl_depth_images cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_d3d10_sharing cl_khr_d3d11_sharing cl_khr_dx9_media_sharing cl_khr_image2d_from_buffer cl_khr_spir cl_khr_subgroups cl_khr_gl_event cl_khr_depth_images cl_khr_mipmap_image cl_khr_mipmap_image_writes cl_amd_liquid_flash cl_amd_planar_yuv

[Lolliedieb]

Hi all,

I just created a file containing only executables (Both, Windows & Linux in one .zip) that will update lolMiner to 0.43b. Changes:

- rebranded SafeCash (SCASH) to Genesis (GENX). Use "COIN" : "GENX" or -coin=GENX to mine it.
- Added Bitcoin Candy. Use "COIN" : "CDY" or -coin=CDY to mine it.
- Added Bitcoin RM. Use "COIN" : "BCRM" or -coin=BCRM to mine it.
- lolMiner will now print a warning, when it does not find its kernel files

Here is the link to the update-pack: Klick Me


More updates to come next 2 weeks - I am doing good progress on the new 0.5 mining codes



-----------------------------------------------

One RX 580 4Gb isnt worked.
In system: Intel HD + RX580

Hi there, can you check with new executable if the miner finds its kernel codes? Because from the memory output of clinfo the memory check should be passed and that two are the only two active checks that may cause the message (the one for compiling error looks different).

------------

I set up a friend with LolMiner a couple of days ago. Running fine and smiling except his miner has colors and mine is black and white. Was there an upgrade or am I missing something? Thanks.

What OS is your friend on? On Windows that can happen on older Windows versions, because the coloring uses WinAPI instructions that are in Win 10 ... hmm ... at least since the October 17 update. Here at home, Win 10 April update I see color, but on an older Win 7 system not, since the API calls are not supported there. On the other hand: Who is watching his rig 24/7 just because of the colors xD As long as its mining, all is good

------------

Im wtite pm with log of amd util.

Replied in private MSG. The 560 is detected as 2G, so 96/5 (MinexCoin) should work, the other two currently not.

------------

Hi, I am a developer of Bitcoin Candy  (official website is cdy.one), can you add support for this coin?   we are using Equihash 144_5 with pers CandyPoW.

Done

------------

Glad to see that the team continue their development to improve this miner, I used this recently to mine MNX, but seems the difficulty of MNX is climbed so high and not profitable, I hope that this version may add additional algo and coin to mine. Great job to lolMiner Developer!

Atm mining indeed is hard, but next pump will come *hope for that, too*.
By the way: I unfortunately do not have a team - this is a one man show

[Quake4]

Hi there, can you check with new executable if the miner finds its kernel codes?

Thanks. Kernels placed in root folder. fix it and all work normal.

[JFoxOne]

We have updated lolMiner's version on both Windows node and mining OS on minerstat.

Enjoy your mining.

[mariokgo]

Maybe someone can help me.
Because in older topics are commenting options removed, I ask here.
The last version that worked for me, is 0.33
But now it also stopped working.
Problem is- everything seems to work, lolminer mines, hashrates are running but nothing goes to my wallet.
My mnx address is correct and in miner overview i do not find my miner.
About week ago, everything were ok.
Any thoughts?

[Quake4]

Lolliedieb

Please, integrate your kernels to executable file.

[paulpoco]

Just tried this Miner.

It is the slowest of all the Equihash 1445, 1926, 965.
And the Dev donation fee is 2%.

Is the Dev going to lower the Dev fee?

Findings of this new miner on 2 x 1070 OC'd:
AMD_NVIDIA-lolMiner-GPU#00-GPU#01[1.00%] Equihash965 35.39 KH/s
NVIDIA-EWBF2Equihash-GPU#00-GPU#01[1.00%] Equihash965 41.65 KH/s

AMD_NVIDIA-lolMiner-GPU#00-GPU#01[2.00%] Equihash1445 56.00 H/s (2% fee, higher fee and slower miner)
NVIDIA-EWBF2Equihash-GPU#00-GPU#01[1.00%] Equihash1445 82.00 H/s

AMD_NVIDIA-lolMiner-GPU#00-GPU#01[2.00%] Equihash1927 37.00 H/s
NVIDIA-EWBF2Equihash-GPU#00-GPU#01[1.00%] Equihash1927 39.00 H/s

Well this won't be used as it is the slowest one.

[Lolliedieb]

Just tried this Miner.
...
Is the Dev going to lower the Dev fee?
...
Well this won't be used as it is the slowest one.

Hi there, thanks for trying out and reporting the results

Well as for your last point: I know and I immediately see that in my own wallet - when a miner is often used cash is flowing well on devs side, but if the software is to bad - well he will get no bugs. Kind of turbo capitalism here. That said: I suspect I have many Nvidia users atm - or rather I am sure for 192/7 and 144/5 I have none. Point is that 0.4x trunk was mainly build to make a software for 144/5 on AMD. I am currently working on new codes that will also speed up for both - AMD and NVIDIA. I already can say that new 192/7 code is faster then current EWBF iteration - but well he knows what he is doing and I am sure he will also bring an optimized version soon.

Regarding fee height:
Developing this stuff is fun but also a bunch of working hours. Therefore I have a simple rule of thumb: when I earned about 500$ with a new code then I lower the fee by 0.5%. This is not yet happened for 144/5, but was already for 96/5 some time ago. There I even made more money in the past, so there the fee is down to 1%. I hope when new code kicks in we will see fee drop to 1.5% soon (obviously because I gained some users then ^^)

Lolliedieb

Please, integrate your kernels to executable file.

Had that some time ago, but problem is that this makes it much harder for me to quickly change some stuff, test, change again. What is problem with current solution? With the parameters "KERNELSDIR" and -usercfg you even can put the config file and the kernel directory wherever you like, so does not have to be at same position as the software itself. So why you need it integrated?