btc3769
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 19, 2016, 08:33:22 PM |
|
You create 5 different pools with different priorities, but they'll need to be the 5 highest priorities in your list. I have mine setup as 4,5,6,7,8,9 (lets me add something as 1,2,3 if I wanted to). Miningpoolhub will automatically shut down the ports it's not using when it switches between them. For example, if it's auto-switching on x11, the x13, x15, quark and qubit pools will show as 'down' in the baikal because miningpoolhub has shut them off, letting the baikal auto switch to them.
|
|
|
|
datlant
Newbie
Offline
Activity: 17
Merit: 0
|
|
August 20, 2016, 09:32:57 AM |
|
You create 5 different pools with different priorities, but they'll need to be the 5 highest priorities in your list. I have mine setup as 4,5,6,7,8,9 (lets me add something as 1,2,3 if I wanted to). Miningpoolhub will automatically shut down the ports it's not using when it switches between them. For example, if it's auto-switching on x11, the x13, x15, quark and qubit pools will show as 'down' in the baikal because miningpoolhub has shut them off, letting the baikal auto switch to them.
@btc3769, thanks a lot!
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
August 20, 2016, 06:19:31 PM |
|
myriad yescrypt pool gonna be add when qubits is remove ?
|
|
|
|
Tai_Pan
|
|
August 20, 2016, 11:22:09 PM |
|
You create 5 different pools with different priorities, but they'll need to be the 5 highest priorities in your list. I have mine setup as 4,5,6,7,8,9 (lets me add something as 1,2,3 if I wanted to). Miningpoolhub will automatically shut down the ports it's not using when it switches between them. For example, if it's auto-switching on x11, the x13, x15, quark and qubit pools will show as 'down' in the baikal because miningpoolhub has shut them off, letting the baikal auto switch to them.
Do you own a Baikal?
|
|
|
|
btc3769
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 21, 2016, 01:45:47 AM |
|
I do, why?
|
|
|
|
TanteStefana2
Legendary
Offline
Activity: 1260
Merit: 1001
|
|
August 21, 2016, 08:47:25 AM |
|
Dash must be updated to latest wallet or mining will be rejected 0.12.0.58
|
Another proud lifetime Dash Foundation member My TanteStefana account was hacked, Beware trading "You'll never reach your destination if you stop to throw stones at every dog that barks."Sir Winston Churchill BTC: 12pu5nMDPEyUGu3HTbnUB5zY5RG65EQE5d
|
|
|
avirdoz
Legendary
Offline
Activity: 1191
Merit: 1001
|
|
August 21, 2016, 09:00:52 AM |
|
Ethereum pool down?
|
|
|
|
TanteStefana2
Legendary
Offline
Activity: 1260
Merit: 1001
|
|
August 22, 2016, 02:08:44 PM Last edit: August 22, 2016, 02:55:13 PM by TanteStefana2 |
|
Baikal Miner Setting for MiningPoolHub1. Set each algo and server info like below. These server and port numbers are written at FAQ page also. quark : stratum+tcp://hub.miningpoolhub.com:12015 qubit : stratum+tcp://hub.miningpoolhub.com:12014 x15 : stratum+tcp://hub.miningpoolhub.com:12009 x13 : stratum+tcp://hub.miningpoolhub.com:12008 x11 : stratum+tcp://hub.miningpoolhub.com:12007 2. Set "ASIC Baikal - Quark, Qubit, x11, x13, x15" at Hub worker page. https://miningpoolhub.com/?page=account&action=hubworkers3. You can also set some coin (like Bitcoin) at Auto Exchange page to get all coins exchanged. (optional) https://miningpoolhub.com/?page=account&action=autoexchange You really need to double check and make sure that your on the correct wallet. Dash forked yesterday with older wallet versions. You post you're on 0.12.0.56 but you should be on 0.12.0.58. If you're on the wrong chain, all the mining going on right now could be for naught. So I'm afraid to mine in case we don't get paid.
|
Another proud lifetime Dash Foundation member My TanteStefana account was hacked, Beware trading "You'll never reach your destination if you stop to throw stones at every dog that barks."Sir Winston Churchill BTC: 12pu5nMDPEyUGu3HTbnUB5zY5RG65EQE5d
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
August 22, 2016, 04:46:46 PM |
|
You create 5 different pools with different priorities, but they'll need to be the 5 highest priorities in your list. I have mine setup as 4,5,6,7,8,9 (lets me add something as 1,2,3 if I wanted to). Miningpoolhub will automatically shut down the ports it's not using when it switches between them. For example, if it's auto-switching on x11, the x13, x15, quark and qubit pools will show as 'down' in the baikal because miningpoolhub has shut them off, letting the baikal auto switch to them.
Hi I don't have baikal miner yet, so have limited knowledge about it. Is it possible to set same priorities to each algo pool? I hope it to stop useless pool alive checking when current connection (algo) is alive.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
August 22, 2016, 04:51:11 PM |
|
Dash must be updated to latest wallet or mining will be rejected 0.12.0.58 Oh, it's already updated few months ago. We are on the right chain. I just forgot to mention it on Dash news page.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
August 22, 2016, 04:51:58 PM |
|
Ethereum pool down?
Nope. it's working well. Please try again.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
August 22, 2016, 04:52:36 PM |
|
You really need to double check and make sure that your on the correct wallet. Dash forked yesterday with older wallet versions. You post you're on 0.12.0.56 but you should be on 0.12.0.58. If you're on the wrong chain, all the mining going on right now could be for naught. So I'm afraid to mine in case we don't get paid.
I updated few months ago. We are on the right chain. I just forgot to mention it on Dash news page. Sorry for inconvenience.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
August 22, 2016, 04:54:20 PM |
|
myriad yescrypt pool gonna be add when qubits is remove ?
Well, not sure at this moment. New Myriadcoin wallet has some bloating memory issues currently. I would open yescrypt pool if this issue is fixed.
|
|
|
|
TanteStefana2
Legendary
Offline
Activity: 1260
Merit: 1001
|
|
August 22, 2016, 10:23:08 PM |
|
Dash must be updated to latest wallet or mining will be rejected 0.12.0.58 Oh, it's already updated few months ago. We are on the right chain. I just forgot to mention it on Dash news page. Awesome, thank you!
|
Another proud lifetime Dash Foundation member My TanteStefana account was hacked, Beware trading "You'll never reach your destination if you stop to throw stones at every dog that barks."Sir Winston Churchill BTC: 12pu5nMDPEyUGu3HTbnUB5zY5RG65EQE5d
|
|
|
btc3769
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 23, 2016, 09:59:09 AM |
|
Hi I don't have baikal miner yet, so have limited knowledge about it.
Is it possible to set same priorities to each algo pool? I hope it to stop useless pool alive checking when current connection (algo) is alive.
Baikal allows you to set different priorities for each port (algo) in the list of pools. It will automatically switch to a new algo when you take a port offline, so it works fine for now. The only thing it doesn't do, which causes issues within Miningpoolhub is allow someone to set difficulties separately for each pool. Would it be possible on the miningpoolhub end to set difficulties for the baikal mining pool for smaller coins (digibyte, etc) to 256 and to whatever lower setting is better for Dash or other 'harder' coins? I have noticed when I keep the difficulty setting at 256 I get lots of rejected shares, but if I take it off I don't think I'm being as efficient with the smaller coins. Thanks!
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
August 23, 2016, 02:22:56 PM |
|
Hi I don't have baikal miner yet, so have limited knowledge about it.
Is it possible to set same priorities to each algo pool? I hope it to stop useless pool alive checking when current connection (algo) is alive.
Baikal allows you to set different priorities for each port (algo) in the list of pools. It will automatically switch to a new algo when you take a port offline, so it works fine for now. The only thing it doesn't do, which causes issues within Miningpoolhub is allow someone to set difficulties separately for each pool. Would it be possible on the miningpoolhub end to set difficulties for the baikal mining pool for smaller coins (digibyte, etc) to 256 and to whatever lower setting is better for Dash or other 'harder' coins? I have noticed when I keep the difficulty setting at 256 I get lots of rejected shares, but if I take it off I don't think I'm being as efficient with the smaller coins. Thanks! Each pool remembers last mined difficulty value and resumes from that value after reconnection. (Different algo pool works independently, they use their own difficulty level) If you want to set starting diff, try to set worker password as "d=256" More info about setting start difficulty is here https://bitcointalk.org/index.php?topic=472510.msg10596890#msg10596890If your issue is about Qubit algo pool, they would have some difficulty mulitplier issue. I'm not sure about this issue with Baikal miner, but sgminer and ccminer used different factor for difficulty level. So, ccminer needed difficulty multiplier value for 256 or 0.00390625 (1/256) to mine. Can you clarify what coin you seem to have problem? And what difficulty value was set at website worker page.
|
|
|
|
btc3769
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 23, 2016, 02:54:16 PM |
|
Each pool remembers last mined difficulty value and resumes from that value after reconnection. (Different algo pool works independently, they use their own difficulty level) If you want to set starting diff, try to set worker password as "d=256" More info about setting start difficulty is here https://bitcointalk.org/index.php?topic=472510.msg10596890#msg10596890If your issue is about Qubit algo pool, they would have some difficulty mulitplier issue. I'm not sure about this issue with Baikal miner, but sgminer and ccminer used different factor for difficulty level. So, ccminer needed difficulty multiplier value for 256 or 0.00390625 (1/256) to mine. Can you clarify what coin you seem to have problem? And what difficulty value was set at website worker page. It's hard for me to say right now. I can say I have my difficulty setting manually set to 256 in my baikal miner (diff-multiplier 256), but currently we're on Dash in the auto-pool and my worker shows a difficulty of 1.58, and a rejected rate of ~1%. I almost always see 0% with anything except Dash-do you think this is because I've set my difficulty at 256, and, if I remove that 256 diff setting, will other, easier coins have the same issue?
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
August 23, 2016, 03:30:38 PM |
|
It's hard for me to say right now. I can say I have my difficulty setting manually set to 256 in my baikal miner (diff-multiplier 256), but currently we're on Dash in the auto-pool and my worker shows a difficulty of 1.58, and a rejected rate of ~1%. I almost always see 0% with anything except Dash-do you think this is because I've set my difficulty at 256, and, if I remove that 256 diff setting, will other, easier coins have the same issue?
I don't think x11 needs diff-multiplier settings, as x11 algo didn't have difficulty factor incompatibility issue from the start. (Only qubit would need that option. Maybe it doesn't need that option at all. You can test it by changing diff-multiplier and see the reject rate from dashboard) ~1% reject is normal. Stale shares (little bit late share) can be rejected, and it can happen to any coin. The reason why you see ~1% reject only from Dash is because Dash is the most profitable coin lately and pool mostly mine that. Other coins would not have long enough time to be mined. 1. Does diff-multiplier affects whole (X11, Qubit, Quark) algo settings? 2. Is your x11 hashrate reported correctly on pool even you set diff-multiplier? Then Baikal's diff-multiplier option doesn't seem to work with x11.
|
|
|
|
btc3769
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 23, 2016, 05:08:40 PM |
|
I don't think x11 needs diff-multiplier settings, as x11 algo didn't have difficulty factor incompatibility issue from the start. (Only qubit would need that option. Maybe it doesn't need that option at all. You can test it by changing diff-multiplier and see the reject rate from dashboard)
~1% reject is normal. Stale shares (little bit late share) can be rejected, and it can happen to any coin. The reason why you see ~1% reject only from Dash is because Dash is the most profitable coin lately and pool mostly mine that. Other coins would not have long enough time to be mined.
1. Does diff-multiplier affects whole (X11, Qubit, Quark) algo settings? 2. Is your x11 hashrate reported correctly on pool even you set diff-multiplier? Then Baikal's diff-multiplier option doesn't seem to work with x11.
The diff-multiplier is a single setting which I believe affects all pools (there's no way to set specific pools or algos, so I've no idea, but this is my guess). I know I had the diff-multiplier set a couple days ago, noticed we were mining Dash, and that I was seeing around 20-30% rejected packets, so I shut off the diff multiplier and it fell back to 0-1%, so I thought it was that setting. Now I have it on again, though, and all seems to be working, so I'll keep an eye on things and let you know if there are more issues
|
|
|
|
btc3769
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 23, 2016, 06:03:27 PM |
|
Also, would there be any way to turn auto-exchange on, but prevent some coins from participating? For example, I would like to auto-exchange Uro and Smartcoin, but I would rather not exchange DASH and ETH. Is there a way to enable this?
|
|
|
|
|