patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 24, 2017, 09:31:54 PM |
|
Hi Patrike,
When this happens :
it leads to this issue :
Miner doesn't gets restarted as AwesomeMiner did not detect the crash.
Offline rules don't do anything, it just stays offline like this forever.
It's not a crash, but it should trigger the offline detection rule. It could probably be detected by the "Accept Progress" rule as well if enabled. Can you please share some details of how the Offline Detection rule is configured? That will help me understand why it didn't work as expected. Thanks! Here you go ! Not sure why even the hashrate 10min doesn't catch it .. https://ibb.co/kNAWa6I have identified a scenario where Offline Detection didn't work correctly for Managed Miners in the "Interface offline" scenario. A correction will be included in the next release.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 24, 2017, 09:34:59 PM |
|
Hi, first of all, thanks for awesome software I use it mostly for ASIC Antminer monitoring, and I have a some question. I made a rule, which reboots asic on trigger "chip failure". However if asic has a "chip failure" right after reboot, there is a infinite reboot. Please give a tip of advice how to make rule with automatic reboot in case of critical failures but not more than 3 times in a row. Thanks a lot. Thanks for your feedback. Today there are no way of counting number of times an action has triggered and have a limit on that. What if you configure your rule to have two triggers? First you check if chip failure, second you have a Time trigger that goes off for example every hour. Then your reboot action will happen at most one time per hour. Your miner will then still do some work in between and you can disable the rule for this specific miner later on if you see that it never recovers.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 24, 2017, 09:35:43 PM |
|
Would you know why I see everything set to 0Mhz even if I can talk to MSI Remote Server ? https://ibb.co/ipOzCmCan you try to enable "Map to system monitoring" feature? http://www.awesomeminer.com/help/gpumapping.aspx
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 24, 2017, 09:40:52 PM |
|
Recently AwesomeMiner began to stop mining after switching to sgminer (I'm on AMDs). From logs it seems to try and restart it a few times, each time complaining about
Process already closed
and
No connection could be made because the target machine actively refused it 127.0.0.1:4028
and then it just gives up. Restart on offline detection didn't help.
From the logs, it doesn't try to switch back to other miners, like EthDcrMiner, it just keeps pounding at the Sgminer until it gives up. I am able to start Sgminer manually using the same command from the log and it works fine. Also I've seen it working fine before with AwesomeMiner. I've checked and Firewall isn't a problem. Access to sgminer.exe is allowed on all ports and I see it listening on 4028 when running.
I didn't find much on this on the net, so coming to the source. It goes down every day, with a 100% repro rate, so I'm loosing hours of mining. Any ideas? Here is the log snippet.
Can you use the Diagnostics button in the toolbar to get more output information from sgminer itself? It may give some hint about what is wrong. In general, Sgminer is the most difficult mining software to configure because it has so many parameters and they depend very much on the GPU's being used, making it difficult to give general recommendations. All other mining software run stable on your system except Sgminer? What about if you try to disable the Neoscrypt algorithm, if it's only that one? Yes, only Sgminer and Sgminer-GM. I disabled both in the AMD profit profile and the mining hasn't stopped ever since, but that defeats the purpose of profit switching. My cards are R9 290s and R9 Fury X. In both cases the same repro. I've caught Sgminer crash process one one of the systems, but don't see similar crashes on other machines where AwesomeMiner just gave up. Here's what it logged: Faulting application name: sgminer.exe, version: 0.0.0.0, time stamp: 0x001dc4e4 Faulting module name: amdocl64.dll, version: 22.19.685.0, time stamp: 0x59d6a487 Exception code: 0xc0000005 Fault offset: 0x000000000049e606 Faulting process id: 0x1d64 Faulting application start time: 0x01d3633675ea8bbb Faulting application path: C:\Users\Michael\AppData\Local\AwesomeMiner\sgminer-gm-5.5.4_1\sgminer-gm\sgminer.exe Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\c0318724.inf_amd64_3e17b73ae627ea03\amdocl64.dll Report Id: 0678aba1-075a-43b9-9b9d-c5d29519691d Faulting package full name: Faulting package-relative application ID: Which looks like a one-off display driver induced bug (17.10.1 radeon drivers). I think the root cause for this AwesomeMiner giving up is its inability to connect to port 4028 on localhost for Sgminer(-gm). I assume that's the control port it uses for manage all miners. It looks like sgminer process dies, and AwesomeMiner doesn't realize that and keeps trying to talk to it, instead of switching to another miner. What would I be looking for in the Diagnostics log? I cannot do much about the crashes in sgminer itself, but I do have a recommendation here. I think that you might have a scenario where Sgminer is crashing, but your system is showing a crash dialog that is preventing the sgminer process from terminating. In this scenario, both Windows and Awesome Miner will think that sgminer is still running and cannot do anything about it. The solution is to disable this dialog in Windows and simply let the process terminate right away. Awesome Miner will detect that as a crash and try to recover. Please see this link for instructions: https://superuser.com/a/715645
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 24, 2017, 09:42:27 PM |
|
How do I get SgMiner to work in AwesomeMiner? I have no issue with Claymore, but when I try to use SgMiner I get this error:
> [20:50:17] All devices disabled, cannot mine! > [20:50:15] Started sgminer 5.5.4-gm > [20:50:15] * using Jansson 2.7 > [20:50:15] Loaded configuration file awesome.conf > [20:50:17] clDevicesNum returned error, no GPUs usable > [20:50:17] All devices disabled, cannot mine!
This is on a 13 x RX570 rig. Using SgMiner in the NiceHash miner works fine.
Two troubleshooting tips here: 1) Try to disable sgminer-gm and only use the standard sgminer. If this is in a profit switcher, please go to Options dialog, Profit profile, Edit AMD, the uncheck sgminer-gm. 2) See if Nicehash adds any custom command line parameters for sgminer on your system that makes it more stable. You can then enter those command line parameters in Awesome Miner itself.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 24, 2017, 09:43:19 PM |
|
I've implemented support for the Dstm Zcash Miner.
You can expect a new release of Awesome Miner within the next 1 - 2 days with this support included.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 24, 2017, 09:46:55 PM |
|
Is there a way to get Awesome Miner to mine three different coins on the game rig? Three different miner programs on the same rig (three algorithms on two GPU's each).
You need to have three different mining processes running for this. Please create three separate Managed Miners, but keep in mind that you need to pass command line parameters to the mining software to instruct that only 2 specific GPU's should be used. The exact command line parameters for this depends on the mining software you run - please refer to their readme files. For Claymore miners it's "-di 0,1" to use GPU0 and GPU1 for example
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
omshree
|
|
November 24, 2017, 11:29:04 PM |
|
Can you support Innosilicon A5 miner? Thanx
Awesome Miner supports a few other Innosilicon miners. I don't know about A5 yet, but it will probably work fine. Do you have this miner already? I do, and it does not shown as an external miner.
|
Donate if you like 1ANALSEXXGMd6HaN6CzQXtURLC5H9TjKoo
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
November 25, 2017, 04:57:44 AM |
|
I've implemented support for the Dstm Zcash Miner.
You can expect a new release of Awesome Miner within the next 1 - 2 days with this support included.
thanks ... o yea don't know if honor it Happy Thanksgiving sense your based in Sweden if not i hope you had a nice Thanksgiving. I'm not trying to find out were your from i don't care were you come from I'm just being seasonal for the time of year ....... cya
|
|
|
|
tailhead
Newbie
Offline
Activity: 12
Merit: 0
|
|
November 25, 2017, 11:59:37 AM |
|
Hi Patrike,
When using profit switcher and switch to Equihash coin, often my miner goes "Interface offline" and never switch to another coin until I restart miner manually. It happen when EWBF return "ERROR: API bind error". I tried to set rule to restart miner when it detect Offlne, but it doesn't help. I set Trigger; - Detect offline, 30 second, - Time interval: 0hours, 1munutes, 0seconds and Actions; - Stop miner - wait 5 seconds - Start miner
As I just added new computer to mine (my 3rd Rig), I'm planning to buy Standard version but I want to make sure this problem to be solved before purchase. This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3). Any suggestions?
First verify that the rule is Enabled (the checkbox). Next, please send me the log file (toolbar: Tools -> Log File) and let me know the name of the miner that didn't trigger the rule as expected. Thanks! Yes, the rule is Enabled. Regarding Log file, please see below, 2017/11/19 7:23:02.615 [019] [S]Managed Profit Switching processing: Rig01 Local, IsRunning: False 2017/11/19 7:23:02.615 [019] [S] Profitability, poolChanged: True, Algorithm: Equihash -> Equihash, EngineType: ZecEwbfMiner ->ZecEwbfMiner, EngineSubType: Disabled ->Disabled, AutoDownload: True, EnginePath: 2017/11/19 7:23:02.615 [001] [S]CoinStore, Built in coin dictionary updated 2017/11/19 7:23:02.677 [001] [S]ServiceAdapter, trigger send settings 2017/11/19 7:23:02.771 [008] [S]Sending Miner Settings to Host: localhost 2017/11/19 7:23:02.771 [011] [S]Updating settings 2017/11/19 7:23:02.771 [011] [S]Current list of Managed Miners: [ManagedMiner#2 - Rig01 Local]
2017/11/19 7:23:02.771 [011] [S]Current list of Clocking Profile:
2017/11/19 7:23:02.771 [011] [S]Current list of Active Miners: [2] IsAttached: True, PID: 6488, InstanceId: 2
2017/11/19 7:23:02.771 [011] [S]Saving configuration to: C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml.tmp 2017/11/19 7:23:02.802 [011] [S]--> C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml 2017/11/19 7:23:04.490 [027] [E]Failed to process API request (time: 1188 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:23:08.100 [021] [E]Failed to download string from: https://granatgas-pool.info/api/status System.Net.WebException: リモート サーバーに接続できません。 2017/11/19 7:23:22.883 [009] [E]Failed to process API request (time: 1063 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:23:29.072 [027] [E]Failed to process API request (time: 1141 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:23:59.660 [010] [E]Failed to process API request (time: 1281 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:24:12.068 [024] [E]Failed to process API request (time: 1250 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:24:27.851 [001] [S]CoinStore, Built in coin dictionary updated 2017/11/19 7:24:30.571 [023] [E]Failed to process API request (time: 1219 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:07.389 [023] [E]Failed to process API request (time: 1172 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:19.578 [011] [E]Failed to process API request (time: 1063 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:25.860 [001] [S]Updating wallet statistics 2017/11/19 7:25:31.423 [009] [E]Failed to download string from: https://granatgas-pool.info/api/status System.Net.WebException: リモート サーバーに接続できません。 2017/11/19 7:25:44.285 [024] [E]Failed to process API request (time: 1281 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:50.661 [025] [E]Failed to process API request (time: 1344 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:56.880 [011] [E]Failed to process API request (time: 1172 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:26:03.069 [027] [E]Failed to process API request (time: 1141 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:26:39.699 [023] [E]Failed to process API request (time: 1094 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:27:28.581 [009] [E]Failed to process API request (time: 1047 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 "リモート サーバーに接続できません。" means cannot connect to remote server "対象のコンピューターによって拒否されたため、接続できませんでした。" means Access denied by target computer My miner name is Rig01 Local. If there are any suggestions, it would be highly appreciated !!
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
November 25, 2017, 01:38:13 PM Last edit: November 25, 2017, 02:18:05 PM by toptek |
|
Hi Patrike,
When using profit switcher and switch to Equihash coin, often my miner goes "Interface offline" and never switch to another coin until I restart miner manually. It happen when EWBF return "ERROR: API bind error". I tried to set rule to restart miner when it detect Offlne, but it doesn't help. I set Trigger; - Detect offline, 30 second, - Time interval: 0hours, 1munutes, 0seconds and Actions; - Stop miner - wait 5 seconds - Start miner
As I just added new computer to mine (my 3rd Rig), I'm planning to buy Standard version but I want to make sure this problem to be solved before purchase. This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3). Any suggestions?
First verify that the rule is Enabled (the checkbox). Next, please send me the log file (toolbar: Tools -> Log File) and let me know the name of the miner that didn't trigger the rule as expected. Thanks! Yes, the rule is Enabled. Regarding Log file, please see below, 2017/11/19 7:23:02.615 [019] [S]Managed Profit Switching processing: Rig01 Local, IsRunning: False 2017/11/19 7:23:02.615 [019] [S] Profitability, poolChanged: True, Algorithm: Equihash -> Equihash, EngineType: ZecEwbfMiner ->ZecEwbfMiner, EngineSubType: Disabled ->Disabled, AutoDownload: True, EnginePath: 2017/11/19 7:23:02.615 [001] [S]CoinStore, Built in coin dictionary updated 2017/11/19 7:23:02.677 [001] [S]ServiceAdapter, trigger send settings 2017/11/19 7:23:02.771 [008] [S]Sending Miner Settings to Host: localhost 2017/11/19 7:23:02.771 [011] [S]Updating settings 2017/11/19 7:23:02.771 [011] [S]Current list of Managed Miners: [ManagedMiner#2 - Rig01 Local]
2017/11/19 7:23:02.771 [011] [S]Current list of Clocking Profile:
2017/11/19 7:23:02.771 [011] [S]Current list of Active Miners: [2] IsAttached: True, PID: 6488, InstanceId: 2
2017/11/19 7:23:02.771 [011] [S]Saving configuration to: C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml.tmp 2017/11/19 7:23:02.802 [011] [S]--> C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml 2017/11/19 7:23:04.490 [027] [E]Failed to process API request (time: 1188 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:23:08.100 [021] [E]Failed to download string from: https://granatgas-pool.info/api/status System.Net.WebException: リモート サーバーに接続できません。 2017/11/19 7:23:22.883 [009] [E]Failed to process API request (time: 1063 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:23:29.072 [027] [E]Failed to process API request (time: 1141 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:23:59.660 [010] [E]Failed to process API request (time: 1281 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:24:12.068 [024] [E]Failed to process API request (time: 1250 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:24:27.851 [001] [S]CoinStore, Built in coin dictionary updated 2017/11/19 7:24:30.571 [023] [E]Failed to process API request (time: 1219 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:07.389 [023] [E]Failed to process API request (time: 1172 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:19.578 [011] [E]Failed to process API request (time: 1063 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:25.860 [001] [S]Updating wallet statistics 2017/11/19 7:25:31.423 [009] [E]Failed to download string from: https://granatgas-pool.info/api/status System.Net.WebException: リモート サーバーに接続できません。 2017/11/19 7:25:44.285 [024] [E]Failed to process API request (time: 1281 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:50.661 [025] [E]Failed to process API request (time: 1344 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:25:56.880 [011] [E]Failed to process API request (time: 1172 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:26:03.069 [027] [E]Failed to process API request (time: 1141 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:26:39.699 [023] [E]Failed to process API request (time: 1094 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/19 7:27:28.581 [009] [E]Failed to process API request (time: 1047 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 "リモート サーバーに接続できません。" means cannot connect to remote server "対象のコンピューターによって拒否されたため、接続できませんでした。" means Access denied by target computer My miner name is Rig01 Local. If there are any suggestions, it would be highly appreciated !! Does it run with out using Awesome miner ? ....if not what is the popup error it gives with out Awesome miner you may need to install something like: vc_redist.x64.exe I have noticed in the past if something is not installed on your PC Awesome won't work with some soft ware miner an not tell you why or everything, you many need to run it directly to see if there is a error of some kind the miner may still shut down without awesome running, if it does then it's a setting you need to find out what that is ... i have also had some pools not work well with awesome miner running but that same pool will if i don't use awesome miner with the same settings i used with awesome miner .. This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3)below could be why the two PC don't have everything they need and the new one does ? . Does it run with out using Awesome miner ? ....if not what is the popup error it may give with out Awesome miner you may need to install something like: vc_redist.x64.exe on those two pc. or wait for the next update of Awesome to come out with Dstm Zcash Miner support that software miner does work better then EWBF software miner or seems to, the only reason i don't use it now is I like Using Awesome miner more . I have a mix of 4 Nv cards with a 1070 ti coming some time next week. an i have two AMD rigs with 4 cards each i may add one more card each to sense the prices for Amd cards are dropping in the US again .
|
|
|
|
tailhead
Newbie
Offline
Activity: 12
Merit: 0
|
|
November 25, 2017, 02:53:09 PM |
|
Does it run with out using Awesome miner ? ....if not what is the popup error it gives with out Awesome miner you may need to install something like: vc_redist.x64.exe I have noticed in the past if something is not installed on your PC Awesome won't work with some soft ware miner an not tell you why or everything, you many need to run it directly to see if there is a error of some kind the miner may still shut down without awesome running, if it does then it's a setting you need to find out what that is ... i have also had some pools not work well with awesome miner running but that same pool will if i don't use awesome miner with the same settings i used with awesome miner ..
This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3)below could be why the two PC don't have everything they need and the new one does ? .
Does it run with out using Awesome miner ? ....if not what is the popup error it may give with out Awesome miner you may need to install something like: vc_redist.x64.exe on those two pc.
or wait for the next update of Awesome to come out with Dstm Zcash Miner support that software miner does work better then EWBF software miner or seems to, the only reason i don't use it now is I like Using Awesome miner more .
I have a mix of 4 Nv cards with a 1070 ti coming some time next week. an i have two AMD rigs with 4 cards each i may add one more card each to sense the prices for Amd cards are dropping in the US again .
Hi, It runs smooth even with AM when run manually. It only happen when Profit switcher changes from a coin to another with Equihash (not everytime). Therefore I asked Patrike for his help. But anyway thanks for your suggestion !!
|
|
|
|
Dalba
Newbie
Offline
Activity: 92
Merit: 0
|
|
November 25, 2017, 04:06:16 PM |
|
Hello Patrike, I would have a suggestion regarding profit switching. As you can see in the picture below, i defined a profit profile for each type of graphic card i own in my rigs.
I then defined a profile group for each of my rig to have exact stats regarding income. In profit group window, can you add an option to set up a specific profit switching profile.
This way it could be possible to have one rig that switch mining between nicehash and an ethereum pool, another rig that switch between zpool and a zcash pool.
It would be a great addition !
Today the pools for the profit switcher are defined on a global level (Options dialog, Profit switching). I assume want want this per profile (or group profile)? I've had similar requests in the past to have have the profit switcher working on multiple set of pools, where not all miners would use the same pools. Hello, Yes, you assume right ! We're already able to create multiple pools groups. What i would like is the possibility to create profit switcher for different group profile ! Doing this, it would be possible for example to create a group profile that switch between pools defined in pool group 1, and create another group profile that would switch pools defined in pool group 2. I would be a really great feature to manage multiple rigs dedicated to specific coins or algorithms. Hello Patrike, I don't want to be considered insistent regarding this feature, but do you think it's technically possible to add to awesome miner the possibility to have a specific profit switcher for one group profile ?
|
|
|
|
SuperPants321
Newbie
Offline
Activity: 10
Merit: 0
|
|
November 25, 2017, 05:44:19 PM |
|
How do I get SgMiner to work in AwesomeMiner? I have no issue with Claymore, but when I try to use SgMiner I get this error:
> [20:50:17] All devices disabled, cannot mine! > [20:50:15] Started sgminer 5.5.4-gm > [20:50:15] * using Jansson 2.7 > [20:50:15] Loaded configuration file awesome.conf > [20:50:17] clDevicesNum returned error, no GPUs usable > [20:50:17] All devices disabled, cannot mine!
This is on a 13 x RX570 rig. Using SgMiner in the NiceHash miner works fine.
Two troubleshooting tips here: 1) Try to disable sgminer-gm and only use the standard sgminer. If this is in a profit switcher, please go to Options dialog, Profit profile, Edit AMD, the uncheck sgminer-gm. 2) See if Nicehash adds any custom command line parameters for sgminer on your system that makes it more stable. You can then enter those command line parameters in Awesome Miner itself. Thanks! I figured it out. I needed to add --gpu-platform 1 to the command line parameters.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 26, 2017, 01:07:59 PM |
|
Can you support Innosilicon A5 miner? Thanx
Awesome Miner supports a few other Innosilicon miners. I don't know about A5 yet, but it will probably work fine. Do you have this miner already? I do, and it does not shown as an external miner. The previous Innosilicon miners where running Cgminer, that had an API enabled that Awesome Miner could connect to. Is this something that needs to be enabled in the configuration of this miner? If you add this as a miner in Awesome Miner as an External Miner, is it showing up as Disconnected?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 26, 2017, 01:43:29 PM |
|
I've implemented support for the Dstm Zcash Miner.
You can expect a new release of Awesome Miner within the next 1 - 2 days with this support included.
thanks ... o yea don't know if honor it Happy Thanksgiving sense your based in Sweden if not i hope you had a nice Thanksgiving. I'm not trying to find out were your from i don't care were you come from I'm just being seasonal for the time of year ....... Yes, I'm located in Sweden. Although Thanksgiving isn't a national holiday here, I appreciate your kindness and hope that you had a nice Thanksgiving!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 26, 2017, 01:45:28 PM |
|
Does it run with out using Awesome miner ? ....if not what is the popup error it gives with out Awesome miner you may need to install something like: vc_redist.x64.exe I have noticed in the past if something is not installed on your PC Awesome won't work with some soft ware miner an not tell you why or everything, you many need to run it directly to see if there is a error of some kind the miner may still shut down without awesome running, if it does then it's a setting you need to find out what that is ... i have also had some pools not work well with awesome miner running but that same pool will if i don't use awesome miner with the same settings i used with awesome miner ..
This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3)below could be why the two PC don't have everything they need and the new one does ? .
Does it run with out using Awesome miner ? ....if not what is the popup error it may give with out Awesome miner you may need to install something like: vc_redist.x64.exe on those two pc.
or wait for the next update of Awesome to come out with Dstm Zcash Miner support that software miner does work better then EWBF software miner or seems to, the only reason i don't use it now is I like Using Awesome miner more .
I have a mix of 4 Nv cards with a 1070 ti coming some time next week. an i have two AMD rigs with 4 cards each i may add one more card each to sense the prices for Amd cards are dropping in the US again .
Hi, It runs smooth even with AM when run manually. It only happen when Profit switcher changes from a coin to another with Equihash (not everytime). Therefore I asked Patrike for his help. But anyway thanks for your suggestion !! I've identified a scenario where the Offline Detection didn't work for Managed Miners, and I think this was the scenario you were running into before. The next version will correct this.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 26, 2017, 02:14:45 PM |
|
Awesome Miner version 4.2.1
- Profit switcher can be configured with a threshold to not make a switch on small profit improvements - Configurable to display Antminer chip temperature in the miner list - Configurable to display average temperature in the miner list - Added feature to faster find a miner in the list, via the new Find toolbar - Command line parameters configurable per pool for the profit switcher in the Options dialog, Online Services section. - A miner group can be defined as the default group for adding new miners - Network scan for External Miners will only consider IP address, not port, to identify if it's a new miner - DSTM Zcash Cuda Miner supported - Correction to Offline Detection of Managed Miners
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
omshree
|
|
November 26, 2017, 02:34:13 PM |
|
Thank you!
|
Donate if you like 1ANALSEXXGMd6HaN6CzQXtURLC5H9TjKoo
|
|
|
tf2addict
|
|
November 26, 2017, 03:03:46 PM Last edit: November 26, 2017, 03:50:52 PM by tf2addict |
|
Any ETA for supporting XMR-Stak's new unified version? That's pretty much all I'm running these days. I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner. But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.
|
|
|
|
|