[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[cawekun]

I'm using AMD with RX580 and I can't make it benchmark any other then Equihash and Ethereum.

On Blake 2B, I can't even see any windows opening. On Cryptonight I see "no pools specified", on the others a windows open, but too fast.

Do you guys have the same problem?

[1714885004]

1714885004

[1714885004]

1714885004

[1714885004]

1714885004

[1714885004]

1714885004

[1714885004]

1714885004

[tf2addict]

I've managed to set it so I can start Cast-XMR remotely on my miners (using generic miner) but I'm not getting any stats on profitability, is there any work around I could use in the mean time to make it detect hash rate? All it detects right now is where it is mining or offline.

Cast-XMR just added an API so hopefully AM will support it soon.  Until then, no there is no way to get hashrate or revenue.

[cawekun]

Guys, why my Awesome Miner Profit thinks that MiningPoolHub has better profit than Nanopool?

https://image.ibb.co/b73w2w/Capture.jpg

[IzzyMoreno]

Hi patrike,

is it possible that you have maybe an bug in your software, maybe in the auto api privilege mode?

since im using your app my devices are often restarting within  2 hours after mining start - sometimes after 5 mines, sometimes after 10 .. maybe sometimes after 20 minutes or an hour so really random but 99% within the first 2 hours. i've deactivated already auto profit switch and the fail detection features but i was sure that isn't solving this, because if some of this options are triggered i should got an notification too.

so, for now i've shutdown your app und since then my miners are running already over 4 hours without interruption. All Devices are btw Antminer L3+.

Ahh and about Granat:
Was working now again - as you said, the problem seems to be the http instability over the last week. for sure it was checked/enabled, but possibly not reachable Not in your Hands

I have the same issue, antminers are restarting when using awesomeminer

Out of the box there are no rules or features in Awesome Miner that reboots an Antminer. There are however two common reason why this happens:

1) You have configured automatic Antminer API configuration in the in Options dialog, Antminer API Access section. If not configured correctly with IP rules, Awesome Miner will continue to detect the miner as being in restricted mode and will try to reconfigure it every 5 minutes.
2) You have a rule where you configured an SSH action to reboot the Antminer.

Both these two scenarios are indicated with SSH connections and SSH commands in the log file of Awesome Miner (toolbar: Tools -> Log file). Can you please check when a reboot happens if you can see any indication of this?

Hey, my Antminers were now online for about 9 Hours without Awesome Miner. With Awesome Miner, i've got again those restarts so we have to find the Problem at the Software

For sure i have activated automatic antminer api configuration but it is working as it should be. Im connecting via VPN to my Antminers, so i have nothing to do with special Port-Forwardings etc. Awesome Miner is connected to the miners via the remote-vpn network. All Miners are privileged. in the Antminer API Access Tab ive set Hardware to "S7 / L3 / D3" and nothing in IP Address rule (any ip address). root user and password are set and accepted. Im right, that i need this automatic function in case of reboots, right?

i haven't set any custom rules and deactivated already all preconfigured rules.

starpool for next update would be really cool

[NetfetMiningCompany]

- XMR-Stak miner can be monitored as an External Miner


Does anybody know how to set the config up for this? I have the miner setup but it doesn't pick up any type of monitoring. Just shows as a "miner online"

There is a setting "httpd_port" in the config.txt file for XMR-Stak, where you need to specify a port for the API. This will be the port that Awesome Miner should be configured to connect to.

Thanks again.

[seavey87]

Those of you that use Awesome Miner profit switching on L3+ and S9, what are you using for switching interval? 30 min?

[whoisthismanoO]

In AW I change the pools for D3 asic but after rebooting asic they are reset and set as they are recorded in the Asic Miner General Configuration tab.
How to fix it?
I want the order of the pools to remain the same as specified in Awesome miner.
Thanks!

Antminers have 3 default pools defined, and the behavior of Antminers is to revert back to these pools when a hard reboot is made. When changing the current pool where the Antminer is mining, the default pools are not changed.

Awesome Miner can configure the default pools as well. Select one or many Antminers and use the toolbar Tools -> Antminer -> Default Pools, to define the 3 default pools.

Thank you Patrike for your great work!
And excuse me, that I could not find it myself.)
Yes, It works, great.

[tamerdagli]

How do I make profit switching work with dual mining?

If it's more profitable to do dual mining, the profit switcher will automatically do that.

Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab.

Sorry Patrike it was a problem on my end, I hadn't updated my version of Awesome Miner. It works flawlessly now, do you if there is any chance of adding XMR-stak Cast-xmr support? I am getting 30% more hashes with Cast-Xmr vs claymore on my RX 580s.

I might get supported, but I get a large number of requets for features and more mining software right now. I added support for XMR-Stak and DSTM Zcash last week for example.

Patrike please add CAST-Xmr it is the best for vegas...

[patrike]

How do I make profit switching work with dual mining?

If it's more profitable to do dual mining, the profit switcher will automatically do that.

Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab.

Sorry Patrike it was a problem on my end, I hadn't updated my version of Awesome Miner. It works flawlessly now, do you if there is any chance of adding XMR-stak Cast-xmr support? I am getting 30% more hashes with Cast-Xmr vs claymore on my RX 580s.

I might get supported, but I get a large number of requets for features and more mining software right now. I added support for XMR-Stak and DSTM Zcash last week for example.

Thanks, great to now. I think cast-Xmr will get really popular since it's by far and large the most powerful cryptonight miner.

Patrike please add CAST-Xmr it is the best for vegas...

I'm looking into Cast XMR right now, so unless this software is doing anything strange, I will release support for it soon.

[patrike]

Hmm, after Windows update and restart, address removing work!
And DASH Balance correct!
Crazy Windows!

The address remove thing was actually a bug. When you remove it, it stays in the list until the next refresh of balance which may take a few minutes. I've corrected that now.

[patrike]

I'll support the report on the balance. It works with errors. When the wallets started everything was displayed correctly, but when the currency was changed and back, everything went wrong and the balances were not correct. Just ask to add the sum of all the purses at the end.

1. I would like to know if DR-100 asic will be added? Since now it displays profitability and hasht is not correct.
2. When is it planned to make an automatic transfer on the yield for the asics?

I will look into the balance scenario.

1) For the DR-100 ASIC, this is actually the first time I get this information. Can you please send me the API report for it via PM or mail? Select the miner and go to the toolbar: Tools -> API Report. Thanks!

2) Can you explain this in more detail?

[patrike]

Guys, why my Awesome Miner Profit thinks that MiningPoolHub has better profit than Nanopool?

MiningPoolHub Ethereum pool is profit switching based on many Ethereum-algorithm based coins, while Nanopool is Ethereum only. So the profits may very well be different

[patrike]

Hi patrike,

is it possible that you have maybe an bug in your software, maybe in the auto api privilege mode?

since im using your app my devices are often restarting within  2 hours after mining start - sometimes after 5 mines, sometimes after 10 .. maybe sometimes after 20 minutes or an hour so really random but 99% within the first 2 hours. i've deactivated already auto profit switch and the fail detection features but i was sure that isn't solving this, because if some of this options are triggered i should got an notification too.

so, for now i've shutdown your app und since then my miners are running already over 4 hours without interruption. All Devices are btw Antminer L3+.

Ahh and about Granat:
Was working now again - as you said, the problem seems to be the http instability over the last week. for sure it was checked/enabled, but possibly not reachable Not in your Hands

I have the same issue, antminers are restarting when using awesomeminer

Out of the box there are no rules or features in Awesome Miner that reboots an Antminer. There are however two common reason why this happens:

1) You have configured automatic Antminer API configuration in the in Options dialog, Antminer API Access section. If not configured correctly with IP rules, Awesome Miner will continue to detect the miner as being in restricted mode and will try to reconfigure it every 5 minutes.
2) You have a rule where you configured an SSH action to reboot the Antminer.

Both these two scenarios are indicated with SSH connections and SSH commands in the log file of Awesome Miner (toolbar: Tools -> Log file). Can you please check when a reboot happens if you can see any indication of this?

Hey, my Antminers were now online for about 9 Hours without Awesome Miner. With Awesome Miner, i've got again those restarts so we have to find the Problem at the Software

For sure i have activated automatic antminer api configuration but it is working as it should be. Im connecting via VPN to my Antminers, so i have nothing to do with special Port-Forwardings etc. Awesome Miner is connected to the miners via the remote-vpn network. All Miners are privileged. in the Antminer API Access Tab ive set Hardware to "S7 / L3 / D3" and nothing in IP Address rule (any ip address). root user and password are set and accepted. Im right, that i need this automatic function in case of reboots, right?

i haven't set any custom rules and deactivated already all preconfigured rules.

starpool for next update would be really cool

If you look in the log file as I suggested (or send them to me), I think you will see that Awesome Miner do detect Restricted API access and make a reboot to correct that.

I can only think of one scenario I've seen in the past where this is going wrong, and that's if you have a temporary network issue where the Antminer fails to respond to the question if it's in Privileged mode. If that fails and Awesome Miner think the miner is running in Restricted mode, you may get a reboot. I can try to address that quite special scenario, but first I would like you to confirm if this is the case.

[cawekun]

I can't benchmark any sgminer algo, it goes in this screen then closes.

https://cloud.githubusercontent.com/assets/16819111/26234576/4085fb32-3c6e-11e7-92ad-f016e3a15f19.JPG

[patrike]

I can't benchmark any sgminer algo, it goes in this screen then closes.

Can you try to launch a miner with sgminer using the Diagnostics button in the toolbar. This will give more information why a specific mining software isn't starting.

[IzzyMoreno]

Hi patrike,

is it possible that you have maybe an bug in your software, maybe in the auto api privilege mode?

since im using your app my devices are often restarting within  2 hours after mining start - sometimes after 5 mines, sometimes after 10 .. maybe sometimes after 20 minutes or an hour so really random but 99% within the first 2 hours. i've deactivated already auto profit switch and the fail detection features but i was sure that isn't solving this, because if some of this options are triggered i should got an notification too.

so, for now i've shutdown your app und since then my miners are running already over 4 hours without interruption. All Devices are btw Antminer L3+.

Ahh and about Granat:
Was working now again - as you said, the problem seems to be the http instability over the last week. for sure it was checked/enabled, but possibly not reachable Not in your Hands

I have the same issue, antminers are restarting when using awesomeminer

Out of the box there are no rules or features in Awesome Miner that reboots an Antminer. There are however two common reason why this happens:

1) You have configured automatic Antminer API configuration in the in Options dialog, Antminer API Access section. If not configured correctly with IP rules, Awesome Miner will continue to detect the miner as being in restricted mode and will try to reconfigure it every 5 minutes.
2) You have a rule where you configured an SSH action to reboot the Antminer.

Both these two scenarios are indicated with SSH connections and SSH commands in the log file of Awesome Miner (toolbar: Tools -> Log file). Can you please check when a reboot happens if you can see any indication of this?

Hey, my Antminers were now online for about 9 Hours without Awesome Miner. With Awesome Miner, i've got again those restarts so we have to find the Problem at the Software

For sure i have activated automatic antminer api configuration but it is working as it should be. Im connecting via VPN to my Antminers, so i have nothing to do with special Port-Forwardings etc. Awesome Miner is connected to the miners via the remote-vpn network. All Miners are privileged. in the Antminer API Access Tab ive set Hardware to "S7 / L3 / D3" and nothing in IP Address rule (any ip address). root user and password are set and accepted. Im right, that i need this automatic function in case of reboots, right?

i haven't set any custom rules and deactivated already all preconfigured rules.

starpool for next update would be really cool

If you look in the log file as I suggested (or send them to me), I think you will see that Awesome Miner do detect Restricted API access and make a reboot to correct that.

I can only think of one scenario I've seen in the past where this is going wrong, and that's if you have a temporary network issue where the Antminer fails to respond to the question if it's in Privileged mode. If that fails and Awesome Miner think the miner is running in Restricted mode, you may get a reboot. I can try to address that quite special scenario, but first I would like you to confirm if this is the case.

Im currently not at home so i cant send the log file but it seems that you are right. Ive deactivated the auto. Api configuration since that i got no restarts. Sometimes the vpn responds with 3-5s, which seems to high for the max timeout in your auto. Api configuration function and triggers then the reboot because awesome miner thinks theyre restricted.  Its not the problem of an bad connection but the upload stream of the remote vpn isnt really fast 😄 maybe a simple longer timeout would be help or something similar to that.

is it possible to add starpool by myself? i like this pool

[kopija]

Greetings patrike,
I intend to use AM for profit switching on hashrefinery.
I added a few missing algos (xevan, tribus, bitcore) and added them  in options-> "online services" section using hashrefinery predefined template values (with their specific port numbers and API values, ofcourse).
But they do not show up in "online services" tab.
Skein and Skunk (which are predefined by AM) show up, but not the ones I added manually.
So I tried adding those three missing algos to "online services", but with zpool values, and lo and behold, they showed up under online services, for BOTH zpool AND hashrefinery.
So what am I doing wrong? Is it a bug or a feature?
How come adding custom algos works for zpool but not for hashrefinery?
Thanks.

[cawekun]

I can't benchmark any sgminer algo, it goes in this screen then closes.

Can you try to launch a miner with sgminer using the Diagnostics button in the toolbar. This will give more information why a specific mining software isn't starting.

Found the issue, I added --gpu-platform 1

But now I still can't benchmark any sgminer coins when using Mining Pool Hub as profit switching. It says there is no pool.

[tamerdagli]

Hi Patrike is it possible to set the power limit to %50 at once for example at 5.00pm and set them at %85 percent at 00.00am.but i need to set them all at once not one by one and i cant seem to make the afterburner integration work and i am using afterburner for overclocking.and also is it possible to set them automatically between the hours i wanted.

Thanks

[STSMiner]

Patrike,

Can you please add support for the following miners

ccminer/8.15-KlausT (cuda 8 and 9)
ccminer/2.2.3 (cuda 9)
ccminer/alexis-hsr

Thanks