[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[textb0ok]

Does anyone use Awesome Miner with zpool?

Out of all of the alternatives, I am finding Awesome Miner with zpool to be my best alternative to Nicehash.... but...

After setting up Awesome Miner with zpool, I am only seeing my rig mining Neoscrypt. I believe I have it setup to auto switch... but I have only seen it mine Neoscrypt since I started. When I used Awesome Miner in the past with Nicehash, it switched much more often.

At first I could not complain because I was making a decent profit rate... but now it has dropped and I am concerned.

____

Also... Does Awesome Miner support xmr in any way? I don't see it.

I was making a decent profit by mining CryptoNight with xmr-stak-cpu with Nicehash.


Thank you for any help you can provide.

Awesome Miner will mine the algo that pays the most.

If you want to change that, visit here >>  http://www.awesomeminer.com/help.aspx

Algos Settings >> http://www.awesomeminer.com/help/addalgorithm.aspx
Any of thses with a checkmark in the box will be mined based on it's profit in USD via profit switching.

http://www.awesomeminer.com/help/profitswitching.aspx

Yes I am aware of all of this. I have read all of those links....

I am asking about the auto switching because 90% of the time Equihash was what Nicehash had me mining but it would still switch to other algorithms all the time for short term gains, and now that I am using Awesome Miner, the only thing I have mined is Neoscrypt.

I setup my managed profit miner just like the link says to and I chose zpool.... it just seems stuck on Neoscrypt.


Also.... is it possible to setup Awesome Miner to use xmr-stak-cpu to mine CryptoNight with my cpu?

[Powdersnake]

How do you determine the Minimum payout?

[temor]

Does anyone else have problems with benchmarking?
I'm trying to run the benchmarks, but the miner keeps telling me there's no pool added. I can mine just fine if I press Start, but the benchmarks can't find any pool.

I've even followed the guide to add your own algorithm to benchmark, and it still can't find it.

Only tried with CryptoNight so far. Anyone got any ideas?

" No pool specified. Add at least one valid pool using the -xpool parameter "

[STSMiner]

How do you determine the Minimum payout?

You don't, that's down to the pool / service your mining at.

[STSMiner]

Does anyone else have problems with benchmarking?
I'm trying to run the benchmarks, but the miner keeps telling me there's no pool added. I can mine just fine if I press Start, but the benchmarks can't find any pool.

I've even followed the guide to add your own algorithm to benchmark, and it still can't find it.

Only tried with CryptoNight so far. Anyone got any ideas?

" No pool specified. Add at least one valid pool using the -xpool parameter "

You must have missed a setting. Profit Switching Profiles also need to be checked as well as the mining software.

http://www.awesomeminer.com/help/profitswitching.aspx   << See the section -- Profit Switching Profile Properties

http://www.awesomeminer.com/help/benchmark.aspx

Also check to see what pools have been enabled.

Configuration section >> http://www.awesomeminer.com/help/profitswitching.aspx

[temor]

Does anyone else have problems with benchmarking?
I'm trying to run the benchmarks, but the miner keeps telling me there's no pool added. I can mine just fine if I press Start, but the benchmarks can't find any pool.

I've even followed the guide to add your own algorithm to benchmark, and it still can't find it.

Only tried with CryptoNight so far. Anyone got any ideas?

" No pool specified. Add at least one valid pool using the -xpool parameter "

You must have missed a setting. Profit Switching Profiles also need to be checked as well as the mining software.

http://www.awesomeminer.com/help/profitswitching.aspx   << See the section -- Profit Switching Profile Properties

http://www.awesomeminer.com/help/benchmark.aspx

Also check to see what pools have been enabled.

Configuration section >> http://www.awesomeminer.com/help/profitswitching.aspx

Yeah, I thought so too. I've checked and double checked everything now. I even did a clean install on both systems, and I just can't get it to find the pool when I'm benchmarking.

It finds it just fine if I just press Start. It'll happily start mining away.
I find it really odd that it would be different when benchmarking like this.

[Gongolo]

Is it possible to specify a different ccminer per algo?
A ccminer fork can perform better than another when using a particular algo, but I think I cannot tell awesomeminer which ccminer select for each algo.

[STSMiner]

Is it possible to specify a different ccminer per algo?
A ccminer fork can perform better than another when using a particular algo, but I think I cannot tell awesomeminer which ccminer select for each algo.

Yes >>> http://www.awesomeminer.com/help/managedsoftware.aspx

[Gongolo]

Is it possible to specify a different ccminer per algo?
A ccminer fork can perform better than another when using a particular algo, but I think I cannot tell awesomeminer which ccminer select for each algo.

Yes >>> http://www.awesomeminer.com/help/managedsoftware.aspx

Cool, thank you!

[STSMiner]

Does anyone else have problems with benchmarking?
I'm trying to run the benchmarks, but the miner keeps telling me there's no pool added. I can mine just fine if I press Start, but the benchmarks can't find any pool.

I've even followed the guide to add your own algorithm to benchmark, and it still can't find it.

Only tried with CryptoNight so far. Anyone got any ideas?

" No pool specified. Add at least one valid pool using the -xpool parameter "

You must have missed a setting. Profit Switching Profiles also need to be checked as well as the mining software.

http://www.awesomeminer.com/help/profitswitching.aspx   << See the section -- Profit Switching Profile Properties

http://www.awesomeminer.com/help/benchmark.aspx

Also check to see what pools have been enabled.

Configuration section >> http://www.awesomeminer.com/help/profitswitching.aspx

Yeah, I thought so too. I've checked and double checked everything now. I even did a clean install on both systems, and I just can't get it to find the pool when I'm benchmarking.

It finds it just fine if I just press Start. It'll happily start mining away.
I find it really odd that it would be different when benchmarking like this.

Right click the miner and do a diagnostic check and post the results here (remove your wallet address before you post it).

[STSMiner]

Is it possible to specify a different ccminer per algo?
A ccminer fork can perform better than another when using a particular algo, but I think I cannot tell awesomeminer which ccminer select for each algo.

Yes >>> http://www.awesomeminer.com/help/managedsoftware.aspx

Cool, thank you!

You will also need to configure the Profit Profiles to enable the software >> http://www.awesomeminer.com/help/profitswitching.aspx

[temor]

Does anyone else have problems with benchmarking?
I'm trying to run the benchmarks, but the miner keeps telling me there's no pool added. I can mine just fine if I press Start, but the benchmarks can't find any pool.

I've even followed the guide to add your own algorithm to benchmark, and it still can't find it.

Only tried with CryptoNight so far. Anyone got any ideas?

" No pool specified. Add at least one valid pool using the -xpool parameter "

You must have missed a setting. Profit Switching Profiles also need to be checked as well as the mining software.

http://www.awesomeminer.com/help/profitswitching.aspx   << See the section -- Profit Switching Profile Properties

http://www.awesomeminer.com/help/benchmark.aspx

Also check to see what pools have been enabled.

Configuration section >> http://www.awesomeminer.com/help/profitswitching.aspx

Yeah, I thought so too. I've checked and double checked everything now. I even did a clean install on both systems, and I just can't get it to find the pool when I'm benchmarking.

It finds it just fine if I just press Start. It'll happily start mining away.
I find it really odd that it would be different when benchmarking like this.

Right click the miner and do a diagnostic check and post the results here (remove your wallet address before you post it).

I appreciate the help. Thanks.

Code:

Starting Diagnostics 
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: SgMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: 
Added rule for: C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1\sgminer.exe
C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1\sgminer.exe --config awesome.conf --text-only --algorithm groestlcoin   (WindowMode: ConsoleFormat, EngineType: SgMiner, IsProfitMiner: True)
Configuration: 
{
  "pools": [
    {
      "name": "MiningPoolHub [Groestl]",
      "nfactor": "10",
      "algorithm": "groestlcoin",
      "url": "stratum+tcp://hub.miningpoolhub.com:17004",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [SHA-3]",
      "nfactor": "10",
      "algorithm": "maxcoin",
      "url": "stratum+tcp://hub.miningpoolhub.com:17003",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Lyra2REv2]",
      "nfactor": "10",
      "algorithm": "lyra2rev2",
      "url": "stratum+tcp://hub.miningpoolhub.com:17018",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [NeoScrypt]",
      "nfactor": "10",
      "algorithm": "neoscrypt",
      "url": "stratum+tcp://hub.miningpoolhub.com:17012",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Scrypt]",
      "nfactor": "10",
      "algorithm": "zuikkis",
      "url": "stratum+tcp://hub.miningpoolhub.com:17001",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Qubit]",
      "nfactor": "10",
      "algorithm": "qubitcoin",
      "url": "stratum+tcp://hub.miningpoolhub.com:17014",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [X11]",
      "nfactor": "10",
      "algorithm": "darkcoin-mod",
      "url": "stratum+tcp://hub.miningpoolhub.com:17007",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Blake 2b]",
      "nfactor": "10",
      "algorithm": "sia",
      "url": "stratum+tcp://hub.miningpoolhub.com:17022",
      "user": "xxx.Beatrice",
      "pass": "x"
    }
  ],
  "api-port": "4028",
  "intensity": "16",
  "worksize": "256",
  "shaders": "2048",
  "failover-only": true,
  "gpu-threads": "2",
  "api-listen": true,
  "api-allow": "W:127.0.0.1/32",
  "expiry": "120",
  "log": "5",
  "queue": "1",
  "scan-time": "60",
  "temp-hysteresis": "3"
}
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 0 name to MiningPoolHub [Groestl]
> [10:57:48] Setting pool 0 N-factor to 10
> [10:57:48] Setting pool 0 algorithm to groestlcoin
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 1 name to MiningPoolHub [SHA-3]
> [10:57:48] Setting pool 1 N-factor to 10
> [10:57:48] Setting pool 1 algorithm to maxcoin
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 2 name to MiningPoolHub [Lyra2REv2]
> [10:57:48] Setting pool 2 N-factor to 10
> [10:57:48] Setting pool 2 algorithm to lyra2rev2
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 3 name to MiningPoolHub [NeoScrypt]
> [10:57:48] Setting pool 3 N-factor to 10
> [10:57:48] Setting pool 3 algorithm to neoscrypt
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 4 name to MiningPoolHub [Scrypt]
> [10:57:48] Setting pool 4 N-factor to 10
> [10:57:48] Setting pool 4 algorithm to zuikkis
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 5 name to MiningPoolHub [Qubit]
> [10:57:48] Setting pool 5 N-factor to 10
> [10:57:48] Setting pool 5 algorithm to qubitcoin
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 6 name to MiningPoolHub [X11]
> [10:57:48] Setting pool 6 N-factor to 10
> [10:57:48] Setting pool 6 algorithm to darkcoin-mod
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 7 name to MiningPoolHub [Blake 2b]
> [10:57:48] Setting pool 7 N-factor to 10
> [10:57:48] Setting pool 7 algorithm to sia
> [10:57:48] Set default algorithm to groestlcoin
> [10:57:48] Started sgminer 5.6.1-nicehash-51
> [10:57:48] * using Jansson 2.7
> [10:57:48] Loaded configuration file awesome.conf
> [10:57:48] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:48] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:48] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:48] Platform devices: 1
> [10:57:48]    0   Cayman
> [10:57:48] Number of ADL devices: 1
Mining Engine Process started, PID: 6456

====================================================================================================
> [10:57:48] ATI ADL Overdrive5 API found.
> [10:57:48] ATI ADL Overdrive6 API found.
> [10:57:48] Found 8 logical ADL adapters
> [10:57:48] ADL index 0, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6719&SUBSYS_31251682&REV_00_4&2D68EC9A&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0 iVendorID:1002 name:AMD Radeon HD 6900 Series
> [10:57:48] ADL index 1, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 2, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 3, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 4, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 5, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 6, id -689702400 - FAILED to get BIOS info
> [10:57:48] Failed to ADL_Adapter_ID_Get. Error -1
> [10:57:48] ADL index 7, id -689702400 - FAILED to get BIOS info
> [10:57:48] Failed to ADL_Adapter_ID_Get. Error -1
> [10:57:48] GPU 0 AMD Radeon HD 6900 Series hardware monitoring enabled
> [10:57:48] ADL GPU 0 is Adapter index 0 and maps to adapter id -689702400
> [10:57:48] GPU 0 BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] Failed to ADL_Overdrive5_FanSpeed_Get for default value
> [10:57:48] Default Devices = all
> [10:57:48] set_devices(all)
> [10:57:48] GPU 0 Worksize set to 256.
> [10:57:48] Loading settings from default_profile for pool 7
> [10:57:48] Pool 7 Algorithm set to "sia"
> [10:57:48] Pool 7 devices set to "all"
> [10:57:48] Pool 7 lookup gap set to "(null)"
> [10:57:48] Pool 7 Intensity set to "16"
> [10:57:48] Pool 7 Thread Concurrency set to "(null)"
> [10:57:48] Pool 7 GPU Clock set to "(null)"
> [10:57:48] Pool 7 GPU Memory clock set to "(null)"
> [10:57:48] Pool 7 GPU Threads set to "2"
> [10:57:48] Pool 7 GPU Fan set to "(null)"
> [10:57:48] Pool 7 GPU Powertune set to "(null)"
> [10:57:48] Pool 7 GPU Vddc set to "(null)"
> [10:57:48] Pool 7 Shaders set to "2048"
> [10:57:48] Pool 7 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 6
> [10:57:48] Pool 6 Algorithm set to "darkcoin-mod"
> [10:57:48] Pool 6 devices set to "all"
> [10:57:48] Pool 6 lookup gap set to "(null)"
> [10:57:48] Pool 6 Intensity set to "16"
> [10:57:48] Pool 6 Thread Concurrency set to "(null)"
> [10:57:48] Pool 6 GPU Clock set to "(null)"
> [10:57:48] Pool 6 GPU Memory clock set to "(null)"
> [10:57:48] Pool 6 GPU Threads set to "2"
> [10:57:48] Pool 6 GPU Fan set to "(null)"
> [10:57:48] Pool 6 GPU Powertune set to "(null)"
> [10:57:48] Pool 6 GPU Vddc set to "(null)"
> [10:57:48] Pool 6 Shaders set to "2048"
> [10:57:48] Pool 6 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 5
> [10:57:48] Pool 5 Algorithm set to "qubitcoin"
> [10:57:48] Pool 5 devices set to "all"
> [10:57:48] Pool 5 lookup gap set to "(null)"
> [10:57:48] Pool 5 Intensity set to "16"
> [10:57:48] Pool 5 Thread Concurrency set to "(null)"
> [10:57:48] Pool 5 GPU Clock set to "(null)"
> [10:57:48] Pool 5 GPU Memory clock set to "(null)"
> [10:57:48] Pool 5 GPU Threads set to "2"
> [10:57:48] Pool 5 GPU Fan set to "(null)"
> [10:57:48] Pool 5 GPU Powertune set to "(null)"
> [10:57:48] Pool 5 GPU Vddc set to "(null)"
> [10:57:48] Pool 5 Shaders set to "2048"
> [10:57:48] Pool 5 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 4
> [10:57:48] Pool 4 Algorithm set to "zuikkis"
> [10:57:48] Pool 4 devices set to "all"
> [10:57:48] Pool 4 lookup gap set to "(null)"
> [10:57:48] Pool 4 Intensity set to "16"
> [10:57:48] Pool 4 Thread Concurrency set to "(null)"
> [10:57:48] Pool 4 GPU Clock set to "(null)"
> [10:57:48] Pool 4 GPU Memory clock set to "(null)"
> [10:57:48] Pool 4 GPU Threads set to "2"
> [10:57:48] Pool 4 GPU Fan set to "(null)"
> [10:57:48] Pool 4 GPU Powertune set to "(null)"
> [10:57:48] Pool 4 GPU Vddc set to "(null)"
> [10:57:48] Pool 4 Shaders set to "2048"
> [10:57:48] Pool 4 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 3
> [10:57:48] Pool 3 Algorithm set to "neoscrypt"
> [10:57:48] Pool 3 devices set to "all"
> [10:57:48] Pool 3 lookup gap set to "(null)"
> [10:57:48] Pool 3 Intensity set to "16"
> [10:57:48] Pool 3 Thread Concurrency set to "(null)"
> [10:57:48] Pool 3 GPU Clock set to "(null)"
> [10:57:48] Pool 3 GPU Memory clock set to "(null)"
> [10:57:48] Pool 3 GPU Threads set to "2"
> [10:57:48] Pool 3 GPU Fan set to "(null)"
> [10:57:48] Pool 3 GPU Powertune set to "(null)"
> [10:57:48] Pool 3 GPU Vddc set to "(null)"
> [10:57:48] Pool 3 Shaders set to "2048"
> [10:57:48] Pool 3 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 2
> [10:57:48] Pool 2 Algorithm set to "lyra2rev2"
> [10:57:48] Pool 2 devices set to "all"
> [10:57:48] Pool 2 lookup gap set to "(null)"
> [10:57:48] Pool 2 Intensity set to "16"
> [10:57:48] Pool 2 Thread Concurrency set to "(null)"
> [10:57:48] Pool 2 GPU Clock set to "(null)"
> [10:57:48] Pool 2 GPU Memory clock set to "(null)"
> [10:57:48] Pool 2 GPU Threads set to "2"
> [10:57:48] Pool 2 GPU Fan set to "(null)"
> [10:57:48] Pool 2 GPU Powertune set to "(null)"
> [10:57:48] Pool 2 GPU Vddc set to "(null)"
> [10:57:48] Pool 2 Shaders set to "2048"
> [10:57:48] Pool 2 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 1
> [10:57:48] Pool 1 Algorithm set to "maxcoin"
> [10:57:48] Pool 1 devices set to "all"
> [10:57:48] Pool 1 lookup gap set to "(null)"
> [10:57:48] Pool 1 Intensity set to "16"
> [10:57:48] Pool 1 Thread Concurrency set to "(null)"
> [10:57:48] Pool 1 GPU Clock set to "(null)"
> [10:57:48] Pool 1 GPU Memory clock set to "(null)"
> [10:57:48] Pool 1 GPU Threads set to "2"
> [10:57:48] Pool 1 GPU Fan set to "(null)"
> [10:57:48] Pool 1 GPU Powertune set to "(null)"
> [10:57:48] Pool 1 GPU Vddc set to "(null)"
> [10:57:48] Pool 1 Shaders set to "2048"
> [10:57:48] Pool 1 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 0
> [10:57:48] Pool 0 Algorithm set to "groestlcoin"
> [10:57:48] Pool 0 devices set to "all"
> [10:57:48] Pool 0 lookup gap set to "(null)"
> [10:57:48] Pool 0 Intensity set to "16"
> [10:57:48] Pool 0 Thread Concurrency set to "(null)"
> [10:57:48] Pool 0 GPU Clock set to "(null)"
> [10:57:48] Pool 0 GPU Memory clock set to "(null)"
> [10:57:48] Pool 0 GPU Threads set to "2"
> [10:57:48] Pool 0 GPU Fan set to "(null)"
> [10:57:48] Pool 0 GPU Powertune set to "(null)"
> [10:57:48] Pool 0 GPU Vddc set to "(null)"
> [10:57:48] Pool 0 Shaders set to "2048"
> [10:57:48] Pool 0 Worksize set to "256"
> [10:57:48] Probing for an alive pool
> [10:57:48] Testing MiningPoolHub [Groestl]
> [10:57:48] Testing MiningPoolHub [SHA-3]
> [10:57:48] Testing MiningPoolHub [Lyra2REv2]
> [10:57:48] Testing MiningPoolHub [NeoScrypt]
> [10:57:48] Testing MiningPoolHub [Scrypt]
> [10:57:48] Testing MiningPoolHub [Qubit]
> [10:57:48] Testing MiningPoolHub [X11]
> [10:57:48] Testing MiningPoolHub [Blake 2b]
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:49] MiningPoolHub [Lyra2REv2] stratum session id: deadbeefcafebabe4dec000000000000
> [10:57:49] MiningPoolHub [Blake 2b] stratum session id: deadbeefcafebabe0325000000000000
> [10:57:49] MiningPoolHub [Scrypt] stratum session id: deadbeefcafebabea16c000000000000
> [10:57:49] MiningPoolHub [SHA-3] stratum session id: deadbeefcafebabece05000000000000
> [10:57:49] MiningPoolHub [X11] stratum session id: deadbeefcafebabe3f26060000000000
> [10:57:49] MiningPoolHub [Qubit] stratum session id: deadbeefcafebabe8622010000000000
> [10:57:49] MiningPoolHub [NeoScrypt] stratum session id: deadbeefcafebabe2148020000000000
> [10:57:49] MiningPoolHub [Groestl] stratum session id: deadbeefcafebabef5ce000000000000
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Stratum authorisation success for MiningPoolHub [Lyra2REv2]
> [10:57:51] Switching to MiningPoolHub [Lyra2REv2] - first alive pool
> [10:57:51] MiningPoolHub [Lyra2REv2] alive
> [10:57:51] Startup GPU initialization... Using settings from pool MiningPoolHub [Lyra2REv2].
> [10:57:51] Startup Pool No = 2
> [10:57:51] compare_pool_settings()
> [10:57:51] set_devices(all)
> [10:57:51] Switching to intensity: pool = 16, default = 16
> [10:57:51] intensity -> 16
> [10:57:51] GPU 0 Worksize set to 256.
> [10:57:51] Set GPU 0 to lyra2rev2
> [10:57:51] Allocate new threads...
> [10:57:51] Assign threads for device 0
> [10:57:51] Thread 0 set pool = 2 (MiningPoolHub [Lyra2REv2])
> [10:57:51] Init GPU thread 0 GPU 0 virtual GPU 0
> [10:57:51] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:51] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:51] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:51] Platform devices: 1
> [10:57:51]    0   Cayman
> [10:57:51] List of devices:
> [10:57:51]    0   Cayman
> [10:57:51] Selected 0: Cayman
> [10:57:51] MiningPoolHub [Lyra2REv2] difficulty changed to 256
> [10:57:51] [THR0] gen_stratum_work() - algorithm = lyra2rev2
> [10:57:51] [THR0] Generated stratum merkle badfe31d8710958b3ca755f83290caeaa1f76d4d82ba3756961c517950640848
> [10:57:51] [THR0] Generated stratum header 20000000dfc20b0291df9f6d3d2877c2a6fef5c19e35d497269929035ba77e8b3940d083badfe31d8710958b3ca755f83290caeaa1f76d4d82ba3756961c5179506408485a2ae0841b01016800000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:51] [THR0] Work job_id 21f9 nonce2 0 ntime 5a2ae084
> [10:57:51] data 20000000dfc20b0291df9f6d3d2877c2a6fef5c19e35d497269929035ba77e8b3940d083badfe31d8710958b3ca755f83290caeaa1f76d4d82ba3756961c5179506408485a2ae0841b01016800000000 midstate dd88884283bff0e1deb7b2446a13c96944fe67d0e27426e2a294e25e6c139c2f
> [10:57:51] [THR0] Generated target 0000000000000000000000000000000000000000000000000000ffff00000000
> [10:57:51] New block: 3940d0835ba77e8b269929039e35d497a6fef5c13d2877c291df9f6ddfc20b02... diff 65.2K
> [10:57:51] Stratum authorisation success for MiningPoolHub [Scrypt]
> [10:57:51] Stratum authorisation success for MiningPoolHub [Blake 2b]
> [10:57:51] MiningPoolHub [Scrypt] alive
> [10:57:51] Suspending stratum on MiningPoolHub [Scrypt]
> [10:57:51] Stratum authorisation success for MiningPoolHub [SHA-3]
> [10:57:51] Stratum authorisation success for MiningPoolHub [X11]
> [10:57:51] Closing socket for stratum MiningPoolHub [Scrypt]
> [10:57:51] JSON-RPC non method decode failed: (unknown reason)
> [10:57:51] Unknown stratum msg: {"id":null,"method":"mining.notify","params":["26a5","0x000000000000004ff9b9cf0e838a2031b056b2cda5c815efc2790ef6adbcfd5400000000000000009fe02a5a00000000099a03f5e6c55c60ea8cd75159ac1bfb89aac1e8e6a32f3428fb89a654b93b95","0x0000000012533fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}
> [10:57:51] MiningPoolHub [Blake 2b] alive
> [10:57:51] MiningPoolHub [X11] alive
> [10:57:51] Suspending stratum on MiningPoolHub [X11]
> [10:57:51] Suspending stratum on MiningPoolHub [SHA-3]
> [10:57:51] MiningPoolHub [SHA-3] alive
> [10:57:51] Suspending stratum on MiningPoolHub [Blake 2b]
> [10:57:51] Closing socket for stratum MiningPoolHub [SHA-3]
> [10:57:51] Closing socket for stratum MiningPoolHub [X11]
> [10:57:51] Closing socket for stratum MiningPoolHub [Blake 2b]
> [10:57:51] Restarting stratum on pool MiningPoolHub [Scrypt]
> [10:57:51] Restarting stratum on pool MiningPoolHub [SHA-3]
> [10:57:51] Restarting stratum on pool MiningPoolHub [X11]
> [10:57:51] Restarting stratum on pool MiningPoolHub [Blake 2b]
> [10:57:51] Stratum authorisation success for MiningPoolHub [Qubit]
> [10:57:51] MiningPoolHub [Qubit] alive
> [10:57:51] Stratum authorisation success for MiningPoolHub [Groestl]
> [10:57:51] MiningPoolHub [Groestl] alive, testing stability
> [10:57:51] MiningPoolHub [Qubit] difficulty changed to 256
> [10:57:51] Suspending stratum on MiningPoolHub [Qubit]
> [10:57:51] Closing socket for stratum MiningPoolHub [Qubit]
> [10:57:51] MiningPoolHub [Groestl] difficulty changed to 3.500
> [10:57:51] Preferred vector width reported 4
> [10:57:51] Max work group size reported 256
> [10:57:51] Maximum work size for this GPU (0) is 256.
> [10:57:51] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:51] Max mem alloc size is 536870912
> [10:57:51] Using source file lyra2rev2.cl
> [10:57:51] GPU 0: selecting lookup gap of 2
> [10:57:51] GPU 0: computing max. global thread count to 65536
> [10:57:51] Setting worksize to 256
> [10:57:51] Using binary file lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:51] No binary found, generating from source
> [10:57:51] Building binary lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:51] Trying to open /usr/i686-w64-mingw32/bin/lyra2rev2.cl...
> [10:57:51] Trying to open C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/lyra2rev2.cl...
> [10:57:51] Using C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/lyra2rev2.cl
> [10:57:51] CompilerOptions: -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1" -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/kernel" -I "." -D WORKSIZE=256 -I "/usr/i686-w64-mingw32/bin"  -D LOOKUP_GAP=2 -D MAX_GLOBAL_THREADS=65536 
> [10:57:51] Stratum authorisation success for MiningPoolHub [NeoScrypt]
> [10:57:51] MiningPoolHub [NeoScrypt] alive
> [10:57:51] Suspending stratum on MiningPoolHub [NeoScrypt]
> [10:57:51] Closing socket for stratum MiningPoolHub [NeoScrypt]
> [10:57:51] Succeeded delayed connect
> [10:57:51] Succeeded delayed connect
> [10:57:51] Succeeded delayed connect
> [10:57:51] Succeeded delayed connect
> [10:57:51] MiningPoolHub [Scrypt] stratum session id: deadbeefcafebabe806c000000000000
> [10:57:51] MiningPoolHub [SHA-3] stratum session id: deadbeefcafebabe3d12000000000000
> [10:57:51] MiningPoolHub [Blake 2b] stratum session id: deadbeefcafebabe0525000000000000
> [10:57:51] MiningPoolHub [X11] stratum session id: deadbeefcafebabe4dbb0e0000000000
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Stratum authorisation success for MiningPoolHub [Scrypt]
> [10:57:53] MiningPoolHub [Scrypt] difficulty changed to 524288
> [10:57:53] [THR0] gen_stratum_work() - algorithm = zuikkis
> [10:57:53] Stratum authorisation success for MiningPoolHub [SHA-3]
> [10:57:53] Stratum authorisation success for MiningPoolHub [Blake 2b]
> [10:57:53] Stratum authorisation success for MiningPoolHub [X11]
> [10:57:53] MiningPoolHub [SHA-3] difficulty changed to 2867.200
> [10:57:53] [THR0] Generated stratum merkle b7ade45c1ad6e2f01a6840bc175ca691911601867fe18255312d7f29a1cf2df5
> [10:57:53] [THR0] Generated stratum header 000000020d3f04b412f0f4611e2c1e890834ed2929aa5d3e60702440ed13070d200026cdb7ade45c1ad6e2f01a6840bc175ca691911601867fe18255312d7f29a1cf2df55a2ae0841b0260b800000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:53] [THR0] Work job_id 2213 nonce2 0 ntime 5a2ae084
> [10:57:53] [THR0] Generated target 00000000000000000000000000000000000000000000000000e0ff1f00000000
> [10:57:53] [THR0] gen_stratum_work() - algorithm = maxcoin
> [10:57:53] JSON-RPC non method decode failed: (unknown reason)
> [10:57:53] Unknown stratum msg: {"id":null,"method":"mining.notify","params":["26ee","0x000000000000004ff9b9cf0e838a2031b056b2cda5c815efc2790ef6adbcfd5400000000000000009fe02a5a00000000617a4fb6f08af1b50cfcfbd9eb2198dca84cfef69a809ea75d313a067a97e705","0x0000000012533fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}
> [10:57:53] [THR0] Generated stratum merkle aa8b1ae56ea0c1b2a75b0c9b43b01ffd8febd74ee5a9b271e9cfb55856b43dc6
> [10:57:53] MiningPoolHub [X11] difficulty changed to 32
> [10:57:53] [THR0] Generated stratum header 0000007077022768278bb048747d195abcf6323e384d87444102980b00381ac500000000aa8b1ae56ea0c1b2a75b0c9b43b01ffd8febd74ee5a9b271e9cfb55856b43dc65a2ae0891b6a4f5900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:53] Suspending stratum on MiningPoolHub [Blake 2b]
> [10:57:53] New block: 200026cded13070d6070244029aa5d3e0834ed291e2c1e8912f0f4610d3f04b4... diff 1.81G
> [10:57:53] [THR0] Work job_id 291f nonce2 0 ntime 5a2ae089
> [10:57:53] Closing socket for stratum MiningPoolHub [Blake 2b]
> [10:57:53] [THR0] Generated target 000000000000000000000000000000000000000000dcb66ddb56db1600000000
> [10:57:53] Suspending stratum on MiningPoolHub [Scrypt]
> [10:57:53] Closing socket for stratum MiningPoolHub [Scrypt]
> [10:57:53] Suspending stratum on MiningPoolHub [X11]
> [10:57:53] Closing socket for stratum MiningPoolHub [X11]
> [10:57:53] New block: 0000000000381ac54102980b384d8744bcf6323e747d195a278bb04877022768... diff 616
> [10:57:53] Suspending stratum on MiningPoolHub [SHA-3]
> [10:57:53] Closing socket for stratum MiningPoolHub [SHA-3]
> [10:57:54] Binary size found in binary slot 0: 957048
> [10:57:54] Initialising kernel lyra2rev2.cl with nfactor 10, n 1024
> [10:57:54] lyra2REv2 buffer sizes: 100663296 RW, 2097152 RW
> [10:57:54] Creating read/write buffer sized 100663296
> [10:57:54] Using read buffer sized 80
> [10:57:54] Using output buffer sized 1024
> [10:57:54] initCl() finished. Found Cayman
> [10:57:54] Thread 1 set pool = 2 (MiningPoolHub [Lyra2REv2])
> [10:57:54] Init GPU thread 1 GPU 0 virtual GPU 0
> [10:57:54] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:54] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:54] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:54] Platform devices: 1
> [10:57:54]    0   Cayman
> [10:57:54] List of devices:
> [10:57:54]    0   Cayman
> [10:57:54] Selected 0: Cayman
> [10:57:54] Preferred vector width reported 4
> [10:57:54] Max work group size reported 256
> [10:57:54] Maximum work size for this GPU (0) is 256.
> [10:57:54] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:54] Max mem alloc size is 536870912
> [10:57:54] Using source file lyra2rev2.cl
> [10:57:54] GPU 0: selecting lookup gap of 2
> [10:57:54] GPU 0: computing max. global thread count to 65536
> [10:57:54] Setting worksize to 256
> [10:57:54] Using binary file lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:54] Loaded binary image lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:54] Initialising kernel lyra2rev2.cl with nfactor 10, n 1024
> [10:57:54] lyra2REv2 buffer sizes: 100663296 RW, 2097152 RW
> [10:57:54] Creating read/write buffer sized 100663296
> [10:57:54] Using read buffer sized 80
> [10:57:54] Using output buffer sized 1024
> [10:57:54] initCl() finished. Found Cayman
> [10:57:54] Starting device 0 mining thread 0...
> [10:57:54] Pushing sem post to thread 0
> [10:57:54] Starting device 0 mining thread 1...
> [10:57:54] Pushing sem post to thread 1
> [10:57:54] Waiting on sem in miner thread
> [10:57:54] [THR0] Popping work from get queue to get work
> [10:57:54] Waiting on sem in miner thread
> [10:57:54] [THR1] Popping work from get queue to get work
> [10:57:55] Work update message received
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 62268d49dd3e4cccc10dbf05ef698cb2c5f53e78e425e572e539ef3bc306fc92
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e80000000062268d49dd3e4cccc10dbf05ef698cb2c5f53e78e425e572e539ef3bc306fc925a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 0 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] New block: 00000000000f28e804e50993fecbda81c893e532f8ec22cd98475b0f40010021... diff 1.89K
> [10:57:55] [THR1] preparing thread...
> [10:57:55] [THR1] get_work_prepare_thread
> [10:57:55] compare_pool_settings()
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 2cdb135bacf8af866958d58779f7df58e288f837554e731bf421b911425094cb
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002cdb135bacf8af866958d58779f7df58e288f837554e731bf421b911425094cb5a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 1 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] [THR0] preparing thread...
> [10:57:55] [THR0] get_work_prepare_thread
> [10:57:55] Applying pool settings for MiningPoolHub [Groestl]...
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] Soft Reset... Shutdown threads...
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 83759eae806a5af95036677a1a1128dc16fa3bf4cbb1e79a2818f197ae3a1424
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e80000000083759eae806a5af95036677a1a1128dc16fa3bf4cbb1e79a2818f197ae3a14245a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 2 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 2b96592ed56d7912ec9846ccbfdb41f1fb5f0e78d6d7a79a87be25d77f2f329a
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002b96592ed56d7912ec9846ccbfdb41f1fb5f0e78d6d7a79a87be25d77f2f329a5a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 3 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] Soft Reset... Restarting threads...
> [10:57:55] Init GPU thread 0 GPU 0 virtual GPU 0
> [10:57:55] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:55] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:55] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:55] Platform devices: 1
> [10:57:55]    0   Cayman
> [10:57:55] List of devices:
> [10:57:55]    0   Cayman
> [10:57:55] Selected 0: Cayman
> [10:57:55] Preferred vector width reported 4
> [10:57:55] Max work group size reported 256
> [10:57:55] Maximum work size for this GPU (0) is 256.
> [10:57:55] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:55] Max mem alloc size is 536870912
> [10:57:55] Using source file groestlcoin.cl
> [10:57:55] GPU 0: selecting lookup gap of 2
> [10:57:55] GPU 0: selecting thread concurrency of 2048
> [10:57:55] Setting worksize to 256
> [10:57:55] Using binary file groestlcoinCaymangw256l4.bin
> [10:57:55] No binary found, generating from source
> [10:57:55] Building binary groestlcoinCaymangw256l4.bin
> [10:57:55] Trying to open /usr/i686-w64-mingw32/bin/groestlcoin.cl...
> [10:57:55] Trying to open C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/groestlcoin.cl...
> [10:57:55] Using C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/groestlcoin.cl
> [10:57:55] CompilerOptions: -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1" -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/kernel" -I "." -D WORKSIZE=256 -I "/usr/i686-w64-mingw32/bin"
> [10:57:57] Binary size found in binary slot 0: 331556
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024
> [10:57:57] Buffer sizes: 0 RW, 128 R
> [10:57:57] Using read buffer sized 128
> [10:57:57] Using output buffer sized 1024
> [10:57:57] initCl() finished. Found Cayman
> [10:57:57] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:57] [THR0] Discarded work
> [10:57:57] Selecting MiningPoolHub [Groestl] for work
> [10:57:57] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:57] [THR0] Generated stratum merkle 7aaa8e99fa01de33afdd4d6a122bddec474fdf623a23059db5009881695adf31
> [10:57:57] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000007aaa8e99fa01de33afdd4d6a122bddec474fdf623a23059db5009881695adf315a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:57] [THR0] Work job_id 2682 nonce2 4 ntime 5a2ae096
> [10:57:57] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:57] Generated stratum work
> [10:57:57] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:57] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:57] [THR0] Discarded work
> [10:57:57] Selecting MiningPoolHub [Groestl] for work
> [10:57:57] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:57] [THR0] Generated stratum merkle 2cc688c49a79ffaeac727e7cd347a20ce40471d522d09a8ede30c5051ce27928
> [10:57:57] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002cc688c49a79ffaeac727e7cd347a20ce40471d522d09a8ede30c5051ce279285a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:57] [THR0] Work job_id 2682 nonce2 5 ntime 5a2ae096
> [10:57:57] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:57] Generated stratum work
> [10:57:57] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:57] Init GPU thread 1 GPU 0 virtual GPU 0
> [10:57:57] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:57] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:57] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:57] Platform devices: 1
> [10:57:57]    0   Cayman
> [10:57:57] List of devices:
> [10:57:57]    0   Cayman
> [10:57:57] Selected 0: Cayman
> [10:57:57] 31.5 C  F: 24%(-1RPM)  E: 250MHz  M: 150Mhz  V: 0.900V  A: 0%  P: 0%
> [10:57:57] Preferred vector width reported 4
> [10:57:57] Max work group size reported 256
> [10:57:57] Maximum work size for this GPU (0) is 256.
> [10:57:57] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:57] Max mem alloc size is 536870912
> [10:57:57] Using source file groestlcoin.cl
> [10:57:57] GPU 0: selecting lookup gap of 2
> [10:57:57] GPU 0: selecting thread concurrency of 2048
> [10:57:57] Setting worksize to 256
> [10:57:57] Using binary file groestlcoinCaymangw256l4.bin
> [10:57:57] Loaded binary image groestlcoinCaymangw256l4.bin
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024
> [10:57:57] Buffer sizes: 0 RW, 128 R
> [10:57:57] Using read buffer sized 128
> [10:57:57] Using output buffer sized 1024
> [10:57:57] initCl() finished. Found Cayman
> [10:57:57] [THR0] Get work blocked for 3 seconds
> [10:57:57] [THR1] Get work blocked for 3 seconds
> [10:57:57] [THR0] Got work from get queue
> [10:57:57] [THR1] Got work from get queue
> [10:57:57] [THR0] Generated target 000000000000000000000000000000000000000000000000000000ffff000000
> [10:57:57] [THR1] Generated target 000000000000000000000000000000000000000000000000000000ffff000000
> [10:57:59] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:59] [THR0] Discarded work
> [10:57:59] Selecting MiningPoolHub [Groestl] for work
> [10:57:59] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:59] [THR0] Generated stratum merkle 3399220e38b9dcd61484092e86d54ccab0a534c0ac16a8c016358de26a163679
> [10:57:59] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000003399220e38b9dcd61484092e86d54ccab0a534c0ac16a8c016358de26a1636795a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:59] [THR0] Work job_id 2682 nonce2 6 ntime 5a2ae096
> [10:57:59] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:59] Generated stratum work
> [10:57:59] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:59] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:59] [THR0] Discarded work
> [10:57:59] Selecting MiningPoolHub [Groestl] for work
> [10:57:59] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:59] [THR0] Generated stratum merkle c875b815e90feb52e6d62df9d1116aea53c750733d222ae9527a6a3acb535f40
> [10:57:59] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000c875b815e90feb52e6d62df9d1116aea53c750733d222ae9527a6a3acb535f405a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:59] [THR0] Work job_id 2682 nonce2 7 ntime 5a2ae096
> [10:57:59] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:59] Generated stratum work
> [10:57:59] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:59] 40.0 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 0%  P: 0%
> [10:58:00] API running in IP access mode on port 4028 (14920)
> [10:58:01] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:01] [THR0] Discarded work
> [10:58:01] Selecting MiningPoolHub [Groestl] for work
> [10:58:01] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:01] [THR0] Generated stratum merkle 7c7ced896644a67ab43f8462ce6cb2f40bfd9035be5cca6bc3178aec6671e1e6
> [10:58:01] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000007c7ced896644a67ab43f8462ce6cb2f40bfd9035be5cca6bc3178aec6671e1e65a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:01] [THR0] Work job_id 2682 nonce2 8 ntime 5a2ae096
> [10:58:01] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:01] Generated stratum work
> [10:58:01] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:01] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:48] Started sgminer 5.6.1-nicehash-51                    
> [10:57:48] * using Jansson 2.7                    
> [10:57:48] Loaded configuration file awesome.conf                    
> [10:58:01] Selecting MiningPoolHub [Groestl] for work
> [10:57:48] Probing for an alive pool                    
> [10:57:51] Switching to MiningPoolHub [Lyra2REv2] - first alive pool                    
> [10:57:51] Startup GPU initialization... Using settings from pool MiningPoolHub [Lyra2REv2].                    
> [10:57:51] Startup Pool No = 2                    
> [10:57:51] MiningPoolHub [Lyra2REv2] difficulty changed to 256                    
> [10:57:51] MiningPoolHub [Groestl] alive, testing stability                    
> [10:57:51] MiningPoolHub [Groestl] difficulty changed to 3.500                    
> [10:57:51] Building binary lyra2rev2Caymangw256l4lgtc65536.bin                    
> [10:57:54] Initialising kernel lyra2rev2.cl with nfactor 10, n 1024                    
> [10:58:01] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] Building binary groestlcoinCaymangw256l4.bin                    
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024                    
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024                    
> [10:58:00] API running in IP access mode on port 4028 (14920)                    
> (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.000/m          
> [10:58:01] 41.0 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 0%  P: 0%
> [10:58:02] GPU 0 found something?
> [10:58:02] [THR1] OCL NONCE 7962b400 (2036511744) found in slot 0 (found = 255)
> [10:58:02] Found share with difficulty 1.426
> [10:58:02] New best share: 1.426
> [10:58:02]  Proof: 000000b38e668d6a8ad391a3d3b6775c3cdf0637a5a4a5992f1ff9f887ab543e
> Target: 0000004924492492492400000000000000000000000000000000000000000000
> TrgVal? no (false positive; hash > target)
> [10:58:02] GPU 0: Share above target
> [10:58:02] [THR1] Discarded cloned or rolled work
> [10:58:02] [thread 0: 13631488 hashes, 1709.1 khash/sec]
> [10:58:02] [thread 1: 13369344 hashes, 1676.1 khash/sec]
> [10:58:03] GPU 0 found something?
> [10:58:03] [THR1] OCL NONCE 1a89e200 (445243904) found in slot 0 (found = 255)
> [10:58:03] Found share with difficulty 1.074
> [10:58:03]  Proof: 000000ee69f875b1bc07a98e9ca442d373f329264ee0997043b6ae4c29800eb2
> Target: 0000004924492492492400000000000000000000000000000000000000000000
> TrgVal? no (false positive; hash > target)
> [10:58:03] GPU 0: Share above target
> [10:58:03] [THR1] Discarded cloned or rolled work
> [10:58:03] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:03] [THR0] Discarded work
> [10:58:03] Selecting MiningPoolHub [Groestl] for work
> [10:58:03] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:03] [THR0] Generated stratum merkle 2e40cb57329f35a174a247b2c1460cc014e43782c39ce6f79d76e1cfc6f5f198
> [10:58:03] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002e40cb57329f35a174a247b2c1460cc014e43782c39ce6f79d76e1cfc6f5f1985a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:03] [THR0] Work job_id 2682 nonce2 10 ntime 5a2ae096
> [10:58:03] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:03] Generated stratum work
> [10:58:03] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:03] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:03] [THR0] Discarded work
> [10:58:03] Selecting MiningPoolHub [Groestl] for work
> [10:58:03] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:03] [THR0] Generated stratum merkle 368df274126ac69e83b43869a211718586c542119986eca83868248bf336aed1
> [10:58:03] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000368df274126ac69e83b43869a211718586c542119986eca83868248bf336aed15a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:03] [THR0] Work job_id 2682 nonce2 11 ntime 5a2ae096
> [10:58:03] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:03] Generated stratum work
> [10:58:03] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:03] 42.0 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 95%  P: 0%
> [10:58:04] Suspending stratum on MiningPoolHub [Lyra2REv2]
> [10:58:04] Closing socket for stratum MiningPoolHub [Lyra2REv2]
> [10:58:05] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:05] [THR0] Discarded work
> [10:58:05] Selecting MiningPoolHub [Groestl] for work
> [10:58:05] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:05] [THR0] Generated stratum merkle 6d26583fc147d91c77b0ab9a6b156afa4c2ddaa04cc19ea70008429b24e14a25
> [10:58:05] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000006d26583fc147d91c77b0ab9a6b156afa4c2ddaa04cc19ea70008429b24e14a255a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:05] [THR0] Work job_id 2682 nonce2 12 ntime 5a2ae096
> [10:58:05] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:05] Generated stratum work
> [10:58:05] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:05] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:05] [THR0] Discarded work
> [10:58:05] Selecting MiningPoolHub [Groestl] for work
> [10:58:05] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:05] [THR0] Generated stratum merkle e9f4ac8c1453fb67046343b782a5346b60bece86d0d4fc9720877ea32045e8a8
> [10:58:05] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000e9f4ac8c1453fb67046343b782a5346b60bece86d0d4fc9720877ea32045e8a85a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:05] [THR0] Work job_id 2682 nonce2 13 ntime 5a2ae096
> [10:58:05] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:05] Generated stratum work
> [10:58:05] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:05] 42.5 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 98%  P: 0%
> [10:58:07] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:07] [THR0] Discarded work
> [10:58:07] Selecting MiningPoolHub [Groestl] for work
> [10:58:07] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:07] [THR0] Generated stratum merkle da4ab0171132882e4a627f696e1abd2f4a080a3925640742787666ddf29d6adc
> [10:58:07] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000da4ab0171132882e4a627f696e1abd2f4a080a3925640742787666ddf29d6adc5a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:07] [THR0] Work job_id 2682 nonce2 14 ntime 5a2ae096
> [10:58:07] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:07] Generated stratum work
> [10:58:07] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> (5s):1.848M (avg):2.247Mh/s | A:0  R:0  HW:0  WU:9.988/m          
> [10:58:07] [THR0] Discarded work
> [10:58:07] Selecting MiningPoolHub [Groestl] for work
> [10:58:07] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:07] [THR0] Generated stratum merkle 23a9e93557e4456dd6ff7c27a9a9d3949d84ee6caf05b6e73ef14dbd342e9a01
> [10:58:07] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e80000000023a9e93557e4456dd6ff7c27a9a9d3949d84ee6caf05b6e73ef14dbd342e9a015a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:07] [THR0] Work job_id 2682 nonce2 15 ntime 5a2ae096
> [10:58:07] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:07] Generated stratum work
> [10:58:07] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:07] 42.5 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 98%  P: 0%
> [10:58:07] [thread 0: 13762560 hashes, 2745.1 khash/sec]
> [10:58:07] [thread 1: 13369344 hashes, 2667.2 khash/sec]

====================================================================================================
Stopping miner process ...
Stopping Mining Software
Diagnostics completed

[klenx]

Hello, I'm very brand new to the world of mining and even newer to awesome miner. I've moved here from the sad burning pile of ashes that is Nicehash =(

I've managed to figure out how to mine ETN from easyhash.io and its going decently but I'd like to learn more! I didn't configure anything and just put in the necessary info and just let it run. Are there any guides/tricks to tweak it a bit to run more efficiently/better? (not exactly sure if this is the best or something else would be more profitable?)

Also I managed to learn the managed miner thing but wasn't sure of the managed profit miner aspect of it. Basically it switches between different pools right? I don't know why it wouldn't work. Do I need to set some stuff up first (wallets, sign up to something?, verify some stuff?)?

Thanks guys!

[CreamyG31337]

How can I get ccminer-nanashi to handle lyra2rev2 but have the normal ccminer for everything else?
I made a profit switching profile with just lyra2rev2 enabled, pointed to the folder where I have the nanashi fork, disabled lyra2rev2 from the default nvidia profile, and created a group including both profiles. No dice. It runs the default ccminer that awesome miner downloaded.
If I just run the ccminer-nanashi only profile, it's starting the correct ccminer. It seems like unchecking lyra2rev2 from the default nvidia profile has no effect.
It's only mining lyra2rev2 because I set the benchmark speed very high in the new profit profile I created. But then it's grabbing the disabled settings from the other profile? WTF!
-edit-
disabled both ccminer's from the default nvidia profile and it doesn't even look at the profile I put in the group and see that it can still hash lyra2rev2.

Are there some bugs or can someone explain how to set this up properly?
-edit-
got it to work with the managed software and adding it in there. definitely some bugs in the other screens / settings since I had to enable and change the hash rate of lyra2rev2 and press ok about 3 times before it actually saved the changes.

[Digggger]

I have a few S9's running with 2 pools, antpool and zpool. 2 miners show Antpool as alive, and are mining fine, 6 others show antpool as dead and will only mine on zpool. Anyone run into this issue? Double checked my pool info. Not sure if it's an awesome miner issue or if its in the antminers.

[STSMiner]

Does anyone else have problems with benchmarking?
I'm trying to run the benchmarks, but the miner keeps telling me there's no pool added. I can mine just fine if I press Start, but the benchmarks can't find any pool.

I've even followed the guide to add your own algorithm to benchmark, and it still can't find it.

Only tried with CryptoNight so far. Anyone got any ideas?

" No pool specified. Add at least one valid pool using the -xpool parameter "

You must have missed a setting. Profit Switching Profiles also need to be checked as well as the mining software.

http://www.awesomeminer.com/help/profitswitching.aspx   << See the section -- Profit Switching Profile Properties

http://www.awesomeminer.com/help/benchmark.aspx

Also check to see what pools have been enabled.

Configuration section >> http://www.awesomeminer.com/help/profitswitching.aspx

Yeah, I thought so too. I've checked and double checked everything now. I even did a clean install on both systems, and I just can't get it to find the pool when I'm benchmarking.

It finds it just fine if I just press Start. It'll happily start mining away.
I find it really odd that it would be different when benchmarking like this.

Right click the miner and do a diagnostic check and post the results here (remove your wallet address before you post it).

I appreciate the help. Thanks.

Code:

Starting Diagnostics 
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: SgMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: 
Added rule for: C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1\sgminer.exe
C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1\sgminer.exe --config awesome.conf --text-only --algorithm groestlcoin   (WindowMode: ConsoleFormat, EngineType: SgMiner, IsProfitMiner: True)
Configuration: 
{
  "pools": [
    {
      "name": "MiningPoolHub [Groestl]",
      "nfactor": "10",
      "algorithm": "groestlcoin",
      "url": "stratum+tcp://hub.miningpoolhub.com:17004",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [SHA-3]",
      "nfactor": "10",
      "algorithm": "maxcoin",
      "url": "stratum+tcp://hub.miningpoolhub.com:17003",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Lyra2REv2]",
      "nfactor": "10",
      "algorithm": "lyra2rev2",
      "url": "stratum+tcp://hub.miningpoolhub.com:17018",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [NeoScrypt]",
      "nfactor": "10",
      "algorithm": "neoscrypt",
      "url": "stratum+tcp://hub.miningpoolhub.com:17012",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Scrypt]",
      "nfactor": "10",
      "algorithm": "zuikkis",
      "url": "stratum+tcp://hub.miningpoolhub.com:17001",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Qubit]",
      "nfactor": "10",
      "algorithm": "qubitcoin",
      "url": "stratum+tcp://hub.miningpoolhub.com:17014",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [X11]",
      "nfactor": "10",
      "algorithm": "darkcoin-mod",
      "url": "stratum+tcp://hub.miningpoolhub.com:17007",
      "user": "xxx.Beatrice",
      "pass": "x"
    },
    {
      "name": "MiningPoolHub [Blake 2b]",
      "nfactor": "10",
      "algorithm": "sia",
      "url": "stratum+tcp://hub.miningpoolhub.com:17022",
      "user": "xxx.Beatrice",
      "pass": "x"
    }
  ],
  "api-port": "4028",
  "intensity": "16",
  "worksize": "256",
  "shaders": "2048",
  "failover-only": true,
  "gpu-threads": "2",
  "api-listen": true,
  "api-allow": "W:127.0.0.1/32",
  "expiry": "120",
  "log": "5",
  "queue": "1",
  "scan-time": "60",
  "temp-hysteresis": "3"
}
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 0 name to MiningPoolHub [Groestl]
> [10:57:48] Setting pool 0 N-factor to 10
> [10:57:48] Setting pool 0 algorithm to groestlcoin
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 1 name to MiningPoolHub [SHA-3]
> [10:57:48] Setting pool 1 N-factor to 10
> [10:57:48] Setting pool 1 algorithm to maxcoin
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 2 name to MiningPoolHub [Lyra2REv2]
> [10:57:48] Setting pool 2 N-factor to 10
> [10:57:48] Setting pool 2 algorithm to lyra2rev2
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 3 name to MiningPoolHub [NeoScrypt]
> [10:57:48] Setting pool 3 N-factor to 10
> [10:57:48] Setting pool 3 algorithm to neoscrypt
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 4 name to MiningPoolHub [Scrypt]
> [10:57:48] Setting pool 4 N-factor to 10
> [10:57:48] Setting pool 4 algorithm to zuikkis
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 5 name to MiningPoolHub [Qubit]
> [10:57:48] Setting pool 5 N-factor to 10
> [10:57:48] Setting pool 5 algorithm to qubitcoin
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 6 name to MiningPoolHub [X11]
> [10:57:48] Setting pool 6 N-factor to 10
> [10:57:48] Setting pool 6 algorithm to darkcoin-mod
> [10:57:48] Global quota greatest common denominator set to 1
> [10:57:48] Setting pool 7 name to MiningPoolHub [Blake 2b]
> [10:57:48] Setting pool 7 N-factor to 10
> [10:57:48] Setting pool 7 algorithm to sia
> [10:57:48] Set default algorithm to groestlcoin
> [10:57:48] Started sgminer 5.6.1-nicehash-51
> [10:57:48] * using Jansson 2.7
> [10:57:48] Loaded configuration file awesome.conf
> [10:57:48] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:48] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:48] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:48] Platform devices: 1
> [10:57:48]    0   Cayman
> [10:57:48] Number of ADL devices: 1
Mining Engine Process started, PID: 6456

====================================================================================================
> [10:57:48] ATI ADL Overdrive5 API found.
> [10:57:48] ATI ADL Overdrive6 API found.
> [10:57:48] Found 8 logical ADL adapters
> [10:57:48] ADL index 0, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6719&SUBSYS_31251682&REV_00_4&2D68EC9A&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0 iVendorID:1002 name:AMD Radeon HD 6900 Series
> [10:57:48] ADL index 1, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 2, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 3, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 4, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 5, id -689702400 - BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] ADL index 6, id -689702400 - FAILED to get BIOS info
> [10:57:48] Failed to ADL_Adapter_ID_Get. Error -1
> [10:57:48] ADL index 7, id -689702400 - FAILED to get BIOS info
> [10:57:48] Failed to ADL_Adapter_ID_Get. Error -1
> [10:57:48] GPU 0 AMD Radeon HD 6900 Series hardware monitoring enabled
> [10:57:48] ADL GPU 0 is Adapter index 0 and maps to adapter id -689702400
> [10:57:48] GPU 0 BIOS partno.: 113-695CDD80-113-C2050200-100, version: 013.010.000.007, date: 2011/01/06 21:50
> [10:57:48] Failed to ADL_Overdrive5_FanSpeed_Get for default value
> [10:57:48] Default Devices = all
> [10:57:48] set_devices(all)
> [10:57:48] GPU 0 Worksize set to 256.
> [10:57:48] Loading settings from default_profile for pool 7
> [10:57:48] Pool 7 Algorithm set to "sia"
> [10:57:48] Pool 7 devices set to "all"
> [10:57:48] Pool 7 lookup gap set to "(null)"
> [10:57:48] Pool 7 Intensity set to "16"
> [10:57:48] Pool 7 Thread Concurrency set to "(null)"
> [10:57:48] Pool 7 GPU Clock set to "(null)"
> [10:57:48] Pool 7 GPU Memory clock set to "(null)"
> [10:57:48] Pool 7 GPU Threads set to "2"
> [10:57:48] Pool 7 GPU Fan set to "(null)"
> [10:57:48] Pool 7 GPU Powertune set to "(null)"
> [10:57:48] Pool 7 GPU Vddc set to "(null)"
> [10:57:48] Pool 7 Shaders set to "2048"
> [10:57:48] Pool 7 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 6
> [10:57:48] Pool 6 Algorithm set to "darkcoin-mod"
> [10:57:48] Pool 6 devices set to "all"
> [10:57:48] Pool 6 lookup gap set to "(null)"
> [10:57:48] Pool 6 Intensity set to "16"
> [10:57:48] Pool 6 Thread Concurrency set to "(null)"
> [10:57:48] Pool 6 GPU Clock set to "(null)"
> [10:57:48] Pool 6 GPU Memory clock set to "(null)"
> [10:57:48] Pool 6 GPU Threads set to "2"
> [10:57:48] Pool 6 GPU Fan set to "(null)"
> [10:57:48] Pool 6 GPU Powertune set to "(null)"
> [10:57:48] Pool 6 GPU Vddc set to "(null)"
> [10:57:48] Pool 6 Shaders set to "2048"
> [10:57:48] Pool 6 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 5
> [10:57:48] Pool 5 Algorithm set to "qubitcoin"
> [10:57:48] Pool 5 devices set to "all"
> [10:57:48] Pool 5 lookup gap set to "(null)"
> [10:57:48] Pool 5 Intensity set to "16"
> [10:57:48] Pool 5 Thread Concurrency set to "(null)"
> [10:57:48] Pool 5 GPU Clock set to "(null)"
> [10:57:48] Pool 5 GPU Memory clock set to "(null)"
> [10:57:48] Pool 5 GPU Threads set to "2"
> [10:57:48] Pool 5 GPU Fan set to "(null)"
> [10:57:48] Pool 5 GPU Powertune set to "(null)"
> [10:57:48] Pool 5 GPU Vddc set to "(null)"
> [10:57:48] Pool 5 Shaders set to "2048"
> [10:57:48] Pool 5 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 4
> [10:57:48] Pool 4 Algorithm set to "zuikkis"
> [10:57:48] Pool 4 devices set to "all"
> [10:57:48] Pool 4 lookup gap set to "(null)"
> [10:57:48] Pool 4 Intensity set to "16"
> [10:57:48] Pool 4 Thread Concurrency set to "(null)"
> [10:57:48] Pool 4 GPU Clock set to "(null)"
> [10:57:48] Pool 4 GPU Memory clock set to "(null)"
> [10:57:48] Pool 4 GPU Threads set to "2"
> [10:57:48] Pool 4 GPU Fan set to "(null)"
> [10:57:48] Pool 4 GPU Powertune set to "(null)"
> [10:57:48] Pool 4 GPU Vddc set to "(null)"
> [10:57:48] Pool 4 Shaders set to "2048"
> [10:57:48] Pool 4 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 3
> [10:57:48] Pool 3 Algorithm set to "neoscrypt"
> [10:57:48] Pool 3 devices set to "all"
> [10:57:48] Pool 3 lookup gap set to "(null)"
> [10:57:48] Pool 3 Intensity set to "16"
> [10:57:48] Pool 3 Thread Concurrency set to "(null)"
> [10:57:48] Pool 3 GPU Clock set to "(null)"
> [10:57:48] Pool 3 GPU Memory clock set to "(null)"
> [10:57:48] Pool 3 GPU Threads set to "2"
> [10:57:48] Pool 3 GPU Fan set to "(null)"
> [10:57:48] Pool 3 GPU Powertune set to "(null)"
> [10:57:48] Pool 3 GPU Vddc set to "(null)"
> [10:57:48] Pool 3 Shaders set to "2048"
> [10:57:48] Pool 3 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 2
> [10:57:48] Pool 2 Algorithm set to "lyra2rev2"
> [10:57:48] Pool 2 devices set to "all"
> [10:57:48] Pool 2 lookup gap set to "(null)"
> [10:57:48] Pool 2 Intensity set to "16"
> [10:57:48] Pool 2 Thread Concurrency set to "(null)"
> [10:57:48] Pool 2 GPU Clock set to "(null)"
> [10:57:48] Pool 2 GPU Memory clock set to "(null)"
> [10:57:48] Pool 2 GPU Threads set to "2"
> [10:57:48] Pool 2 GPU Fan set to "(null)"
> [10:57:48] Pool 2 GPU Powertune set to "(null)"
> [10:57:48] Pool 2 GPU Vddc set to "(null)"
> [10:57:48] Pool 2 Shaders set to "2048"
> [10:57:48] Pool 2 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 1
> [10:57:48] Pool 1 Algorithm set to "maxcoin"
> [10:57:48] Pool 1 devices set to "all"
> [10:57:48] Pool 1 lookup gap set to "(null)"
> [10:57:48] Pool 1 Intensity set to "16"
> [10:57:48] Pool 1 Thread Concurrency set to "(null)"
> [10:57:48] Pool 1 GPU Clock set to "(null)"
> [10:57:48] Pool 1 GPU Memory clock set to "(null)"
> [10:57:48] Pool 1 GPU Threads set to "2"
> [10:57:48] Pool 1 GPU Fan set to "(null)"
> [10:57:48] Pool 1 GPU Powertune set to "(null)"
> [10:57:48] Pool 1 GPU Vddc set to "(null)"
> [10:57:48] Pool 1 Shaders set to "2048"
> [10:57:48] Pool 1 Worksize set to "256"
> [10:57:48] Loading settings from default_profile for pool 0
> [10:57:48] Pool 0 Algorithm set to "groestlcoin"
> [10:57:48] Pool 0 devices set to "all"
> [10:57:48] Pool 0 lookup gap set to "(null)"
> [10:57:48] Pool 0 Intensity set to "16"
> [10:57:48] Pool 0 Thread Concurrency set to "(null)"
> [10:57:48] Pool 0 GPU Clock set to "(null)"
> [10:57:48] Pool 0 GPU Memory clock set to "(null)"
> [10:57:48] Pool 0 GPU Threads set to "2"
> [10:57:48] Pool 0 GPU Fan set to "(null)"
> [10:57:48] Pool 0 GPU Powertune set to "(null)"
> [10:57:48] Pool 0 GPU Vddc set to "(null)"
> [10:57:48] Pool 0 Shaders set to "2048"
> [10:57:48] Pool 0 Worksize set to "256"
> [10:57:48] Probing for an alive pool
> [10:57:48] Testing MiningPoolHub [Groestl]
> [10:57:48] Testing MiningPoolHub [SHA-3]
> [10:57:48] Testing MiningPoolHub [Lyra2REv2]
> [10:57:48] Testing MiningPoolHub [NeoScrypt]
> [10:57:48] Testing MiningPoolHub [Scrypt]
> [10:57:48] Testing MiningPoolHub [Qubit]
> [10:57:48] Testing MiningPoolHub [X11]
> [10:57:48] Testing MiningPoolHub [Blake 2b]
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:48] Succeeded delayed connect
> [10:57:49] MiningPoolHub [Lyra2REv2] stratum session id: deadbeefcafebabe4dec000000000000
> [10:57:49] MiningPoolHub [Blake 2b] stratum session id: deadbeefcafebabe0325000000000000
> [10:57:49] MiningPoolHub [Scrypt] stratum session id: deadbeefcafebabea16c000000000000
> [10:57:49] MiningPoolHub [SHA-3] stratum session id: deadbeefcafebabece05000000000000
> [10:57:49] MiningPoolHub [X11] stratum session id: deadbeefcafebabe3f26060000000000
> [10:57:49] MiningPoolHub [Qubit] stratum session id: deadbeefcafebabe8622010000000000
> [10:57:49] MiningPoolHub [NeoScrypt] stratum session id: deadbeefcafebabe2148020000000000
> [10:57:49] MiningPoolHub [Groestl] stratum session id: deadbeefcafebabef5ce000000000000
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Timed out waiting for response extranonce.subscribe
> [10:57:51] Stratum authorisation success for MiningPoolHub [Lyra2REv2]
> [10:57:51] Switching to MiningPoolHub [Lyra2REv2] - first alive pool
> [10:57:51] MiningPoolHub [Lyra2REv2] alive
> [10:57:51] Startup GPU initialization... Using settings from pool MiningPoolHub [Lyra2REv2].
> [10:57:51] Startup Pool No = 2
> [10:57:51] compare_pool_settings()
> [10:57:51] set_devices(all)
> [10:57:51] Switching to intensity: pool = 16, default = 16
> [10:57:51] intensity -> 16
> [10:57:51] GPU 0 Worksize set to 256.
> [10:57:51] Set GPU 0 to lyra2rev2
> [10:57:51] Allocate new threads...
> [10:57:51] Assign threads for device 0
> [10:57:51] Thread 0 set pool = 2 (MiningPoolHub [Lyra2REv2])
> [10:57:51] Init GPU thread 0 GPU 0 virtual GPU 0
> [10:57:51] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:51] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:51] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:51] Platform devices: 1
> [10:57:51]    0   Cayman
> [10:57:51] List of devices:
> [10:57:51]    0   Cayman
> [10:57:51] Selected 0: Cayman
> [10:57:51] MiningPoolHub [Lyra2REv2] difficulty changed to 256
> [10:57:51] [THR0] gen_stratum_work() - algorithm = lyra2rev2
> [10:57:51] [THR0] Generated stratum merkle badfe31d8710958b3ca755f83290caeaa1f76d4d82ba3756961c517950640848
> [10:57:51] [THR0] Generated stratum header 20000000dfc20b0291df9f6d3d2877c2a6fef5c19e35d497269929035ba77e8b3940d083badfe31d8710958b3ca755f83290caeaa1f76d4d82ba3756961c5179506408485a2ae0841b01016800000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:51] [THR0] Work job_id 21f9 nonce2 0 ntime 5a2ae084
> [10:57:51] data 20000000dfc20b0291df9f6d3d2877c2a6fef5c19e35d497269929035ba77e8b3940d083badfe31d8710958b3ca755f83290caeaa1f76d4d82ba3756961c5179506408485a2ae0841b01016800000000 midstate dd88884283bff0e1deb7b2446a13c96944fe67d0e27426e2a294e25e6c139c2f
> [10:57:51] [THR0] Generated target 0000000000000000000000000000000000000000000000000000ffff00000000
> [10:57:51] New block: 3940d0835ba77e8b269929039e35d497a6fef5c13d2877c291df9f6ddfc20b02... diff 65.2K
> [10:57:51] Stratum authorisation success for MiningPoolHub [Scrypt]
> [10:57:51] Stratum authorisation success for MiningPoolHub [Blake 2b]
> [10:57:51] MiningPoolHub [Scrypt] alive
> [10:57:51] Suspending stratum on MiningPoolHub [Scrypt]
> [10:57:51] Stratum authorisation success for MiningPoolHub [SHA-3]
> [10:57:51] Stratum authorisation success for MiningPoolHub [X11]
> [10:57:51] Closing socket for stratum MiningPoolHub [Scrypt]
> [10:57:51] JSON-RPC non method decode failed: (unknown reason)
> [10:57:51] Unknown stratum msg: {"id":null,"method":"mining.notify","params":["26a5","0x000000000000004ff9b9cf0e838a2031b056b2cda5c815efc2790ef6adbcfd5400000000000000009fe02a5a00000000099a03f5e6c55c60ea8cd75159ac1bfb89aac1e8e6a32f3428fb89a654b93b95","0x0000000012533fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}
> [10:57:51] MiningPoolHub [Blake 2b] alive
> [10:57:51] MiningPoolHub [X11] alive
> [10:57:51] Suspending stratum on MiningPoolHub [X11]
> [10:57:51] Suspending stratum on MiningPoolHub [SHA-3]
> [10:57:51] MiningPoolHub [SHA-3] alive
> [10:57:51] Suspending stratum on MiningPoolHub [Blake 2b]
> [10:57:51] Closing socket for stratum MiningPoolHub [SHA-3]
> [10:57:51] Closing socket for stratum MiningPoolHub [X11]
> [10:57:51] Closing socket for stratum MiningPoolHub [Blake 2b]
> [10:57:51] Restarting stratum on pool MiningPoolHub [Scrypt]
> [10:57:51] Restarting stratum on pool MiningPoolHub [SHA-3]
> [10:57:51] Restarting stratum on pool MiningPoolHub [X11]
> [10:57:51] Restarting stratum on pool MiningPoolHub [Blake 2b]
> [10:57:51] Stratum authorisation success for MiningPoolHub [Qubit]
> [10:57:51] MiningPoolHub [Qubit] alive
> [10:57:51] Stratum authorisation success for MiningPoolHub [Groestl]
> [10:57:51] MiningPoolHub [Groestl] alive, testing stability
> [10:57:51] MiningPoolHub [Qubit] difficulty changed to 256
> [10:57:51] Suspending stratum on MiningPoolHub [Qubit]
> [10:57:51] Closing socket for stratum MiningPoolHub [Qubit]
> [10:57:51] MiningPoolHub [Groestl] difficulty changed to 3.500
> [10:57:51] Preferred vector width reported 4
> [10:57:51] Max work group size reported 256
> [10:57:51] Maximum work size for this GPU (0) is 256.
> [10:57:51] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:51] Max mem alloc size is 536870912
> [10:57:51] Using source file lyra2rev2.cl
> [10:57:51] GPU 0: selecting lookup gap of 2
> [10:57:51] GPU 0: computing max. global thread count to 65536
> [10:57:51] Setting worksize to 256
> [10:57:51] Using binary file lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:51] No binary found, generating from source
> [10:57:51] Building binary lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:51] Trying to open /usr/i686-w64-mingw32/bin/lyra2rev2.cl...
> [10:57:51] Trying to open C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/lyra2rev2.cl...
> [10:57:51] Using C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/lyra2rev2.cl
> [10:57:51] CompilerOptions: -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1" -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/kernel" -I "." -D WORKSIZE=256 -I "/usr/i686-w64-mingw32/bin"  -D LOOKUP_GAP=2 -D MAX_GLOBAL_THREADS=65536 
> [10:57:51] Stratum authorisation success for MiningPoolHub [NeoScrypt]
> [10:57:51] MiningPoolHub [NeoScrypt] alive
> [10:57:51] Suspending stratum on MiningPoolHub [NeoScrypt]
> [10:57:51] Closing socket for stratum MiningPoolHub [NeoScrypt]
> [10:57:51] Succeeded delayed connect
> [10:57:51] Succeeded delayed connect
> [10:57:51] Succeeded delayed connect
> [10:57:51] Succeeded delayed connect
> [10:57:51] MiningPoolHub [Scrypt] stratum session id: deadbeefcafebabe806c000000000000
> [10:57:51] MiningPoolHub [SHA-3] stratum session id: deadbeefcafebabe3d12000000000000
> [10:57:51] MiningPoolHub [Blake 2b] stratum session id: deadbeefcafebabe0525000000000000
> [10:57:51] MiningPoolHub [X11] stratum session id: deadbeefcafebabe4dbb0e0000000000
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Timed out waiting for response extranonce.subscribe
> [10:57:53] Stratum authorisation success for MiningPoolHub [Scrypt]
> [10:57:53] MiningPoolHub [Scrypt] difficulty changed to 524288
> [10:57:53] [THR0] gen_stratum_work() - algorithm = zuikkis
> [10:57:53] Stratum authorisation success for MiningPoolHub [SHA-3]
> [10:57:53] Stratum authorisation success for MiningPoolHub [Blake 2b]
> [10:57:53] Stratum authorisation success for MiningPoolHub [X11]
> [10:57:53] MiningPoolHub [SHA-3] difficulty changed to 2867.200
> [10:57:53] [THR0] Generated stratum merkle b7ade45c1ad6e2f01a6840bc175ca691911601867fe18255312d7f29a1cf2df5
> [10:57:53] [THR0] Generated stratum header 000000020d3f04b412f0f4611e2c1e890834ed2929aa5d3e60702440ed13070d200026cdb7ade45c1ad6e2f01a6840bc175ca691911601867fe18255312d7f29a1cf2df55a2ae0841b0260b800000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:53] [THR0] Work job_id 2213 nonce2 0 ntime 5a2ae084
> [10:57:53] [THR0] Generated target 00000000000000000000000000000000000000000000000000e0ff1f00000000
> [10:57:53] [THR0] gen_stratum_work() - algorithm = maxcoin
> [10:57:53] JSON-RPC non method decode failed: (unknown reason)
> [10:57:53] Unknown stratum msg: {"id":null,"method":"mining.notify","params":["26ee","0x000000000000004ff9b9cf0e838a2031b056b2cda5c815efc2790ef6adbcfd5400000000000000009fe02a5a00000000617a4fb6f08af1b50cfcfbd9eb2198dca84cfef69a809ea75d313a067a97e705","0x0000000012533fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}
> [10:57:53] [THR0] Generated stratum merkle aa8b1ae56ea0c1b2a75b0c9b43b01ffd8febd74ee5a9b271e9cfb55856b43dc6
> [10:57:53] MiningPoolHub [X11] difficulty changed to 32
> [10:57:53] [THR0] Generated stratum header 0000007077022768278bb048747d195abcf6323e384d87444102980b00381ac500000000aa8b1ae56ea0c1b2a75b0c9b43b01ffd8febd74ee5a9b271e9cfb55856b43dc65a2ae0891b6a4f5900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:53] Suspending stratum on MiningPoolHub [Blake 2b]
> [10:57:53] New block: 200026cded13070d6070244029aa5d3e0834ed291e2c1e8912f0f4610d3f04b4... diff 1.81G
> [10:57:53] [THR0] Work job_id 291f nonce2 0 ntime 5a2ae089
> [10:57:53] Closing socket for stratum MiningPoolHub [Blake 2b]
> [10:57:53] [THR0] Generated target 000000000000000000000000000000000000000000dcb66ddb56db1600000000
> [10:57:53] Suspending stratum on MiningPoolHub [Scrypt]
> [10:57:53] Closing socket for stratum MiningPoolHub [Scrypt]
> [10:57:53] Suspending stratum on MiningPoolHub [X11]
> [10:57:53] Closing socket for stratum MiningPoolHub [X11]
> [10:57:53] New block: 0000000000381ac54102980b384d8744bcf6323e747d195a278bb04877022768... diff 616
> [10:57:53] Suspending stratum on MiningPoolHub [SHA-3]
> [10:57:53] Closing socket for stratum MiningPoolHub [SHA-3]
> [10:57:54] Binary size found in binary slot 0: 957048
> [10:57:54] Initialising kernel lyra2rev2.cl with nfactor 10, n 1024
> [10:57:54] lyra2REv2 buffer sizes: 100663296 RW, 2097152 RW
> [10:57:54] Creating read/write buffer sized 100663296
> [10:57:54] Using read buffer sized 80
> [10:57:54] Using output buffer sized 1024
> [10:57:54] initCl() finished. Found Cayman
> [10:57:54] Thread 1 set pool = 2 (MiningPoolHub [Lyra2REv2])
> [10:57:54] Init GPU thread 1 GPU 0 virtual GPU 0
> [10:57:54] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:54] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:54] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:54] Platform devices: 1
> [10:57:54]    0   Cayman
> [10:57:54] List of devices:
> [10:57:54]    0   Cayman
> [10:57:54] Selected 0: Cayman
> [10:57:54] Preferred vector width reported 4
> [10:57:54] Max work group size reported 256
> [10:57:54] Maximum work size for this GPU (0) is 256.
> [10:57:54] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:54] Max mem alloc size is 536870912
> [10:57:54] Using source file lyra2rev2.cl
> [10:57:54] GPU 0: selecting lookup gap of 2
> [10:57:54] GPU 0: computing max. global thread count to 65536
> [10:57:54] Setting worksize to 256
> [10:57:54] Using binary file lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:54] Loaded binary image lyra2rev2Caymangw256l4lgtc65536.bin
> [10:57:54] Initialising kernel lyra2rev2.cl with nfactor 10, n 1024
> [10:57:54] lyra2REv2 buffer sizes: 100663296 RW, 2097152 RW
> [10:57:54] Creating read/write buffer sized 100663296
> [10:57:54] Using read buffer sized 80
> [10:57:54] Using output buffer sized 1024
> [10:57:54] initCl() finished. Found Cayman
> [10:57:54] Starting device 0 mining thread 0...
> [10:57:54] Pushing sem post to thread 0
> [10:57:54] Starting device 0 mining thread 1...
> [10:57:54] Pushing sem post to thread 1
> [10:57:54] Waiting on sem in miner thread
> [10:57:54] [THR0] Popping work from get queue to get work
> [10:57:54] Waiting on sem in miner thread
> [10:57:54] [THR1] Popping work from get queue to get work
> [10:57:55] Work update message received
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 62268d49dd3e4cccc10dbf05ef698cb2c5f53e78e425e572e539ef3bc306fc92
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e80000000062268d49dd3e4cccc10dbf05ef698cb2c5f53e78e425e572e539ef3bc306fc925a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 0 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] New block: 00000000000f28e804e50993fecbda81c893e532f8ec22cd98475b0f40010021... diff 1.89K
> [10:57:55] [THR1] preparing thread...
> [10:57:55] [THR1] get_work_prepare_thread
> [10:57:55] compare_pool_settings()
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 2cdb135bacf8af866958d58779f7df58e288f837554e731bf421b911425094cb
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002cdb135bacf8af866958d58779f7df58e288f837554e731bf421b911425094cb5a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 1 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] [THR0] preparing thread...
> [10:57:55] [THR0] get_work_prepare_thread
> [10:57:55] Applying pool settings for MiningPoolHub [Groestl]...
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] Soft Reset... Shutdown threads...
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 83759eae806a5af95036677a1a1128dc16fa3bf4cbb1e79a2818f197ae3a1424
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e80000000083759eae806a5af95036677a1a1128dc16fa3bf4cbb1e79a2818f197ae3a14245a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 2 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] Selecting MiningPoolHub [Groestl] for work
> [10:57:55] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:55] [THR0] Generated stratum merkle 2b96592ed56d7912ec9846ccbfdb41f1fb5f0e78d6d7a79a87be25d77f2f329a
> [10:57:55] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002b96592ed56d7912ec9846ccbfdb41f1fb5f0e78d6d7a79a87be25d77f2f329a5a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:55] [THR0] Work job_id 2682 nonce2 3 ntime 5a2ae096
> [10:57:55] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:55] Generated stratum work
> [10:57:55] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] Soft Reset... Restarting threads...
> [10:57:55] Init GPU thread 0 GPU 0 virtual GPU 0
> [10:57:55] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:55] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:55] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:55] Platform devices: 1
> [10:57:55]    0   Cayman
> [10:57:55] List of devices:
> [10:57:55]    0   Cayman
> [10:57:55] Selected 0: Cayman
> [10:57:55] Preferred vector width reported 4
> [10:57:55] Max work group size reported 256
> [10:57:55] Maximum work size for this GPU (0) is 256.
> [10:57:55] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:55] Max mem alloc size is 536870912
> [10:57:55] Using source file groestlcoin.cl
> [10:57:55] GPU 0: selecting lookup gap of 2
> [10:57:55] GPU 0: selecting thread concurrency of 2048
> [10:57:55] Setting worksize to 256
> [10:57:55] Using binary file groestlcoinCaymangw256l4.bin
> [10:57:55] No binary found, generating from source
> [10:57:55] Building binary groestlcoinCaymangw256l4.bin
> [10:57:55] Trying to open /usr/i686-w64-mingw32/bin/groestlcoin.cl...
> [10:57:55] Trying to open C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/groestlcoin.cl...
> [10:57:55] Using C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/groestlcoin.cl
> [10:57:55] CompilerOptions: -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1" -I "C:\Users\Worker2\AppData\Roaming\AwesomeMinerService\sgminer-5.6.1-nicehash-51-windows-i386_1/kernel" -I "." -D WORKSIZE=256 -I "/usr/i686-w64-mingw32/bin"
> [10:57:57] Binary size found in binary slot 0: 331556
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024
> [10:57:57] Buffer sizes: 0 RW, 128 R
> [10:57:57] Using read buffer sized 128
> [10:57:57] Using output buffer sized 1024
> [10:57:57] initCl() finished. Found Cayman
> [10:57:57] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:57] [THR0] Discarded work
> [10:57:57] Selecting MiningPoolHub [Groestl] for work
> [10:57:57] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:57] [THR0] Generated stratum merkle 7aaa8e99fa01de33afdd4d6a122bddec474fdf623a23059db5009881695adf31
> [10:57:57] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000007aaa8e99fa01de33afdd4d6a122bddec474fdf623a23059db5009881695adf315a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:57] [THR0] Work job_id 2682 nonce2 4 ntime 5a2ae096
> [10:57:57] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:57] Generated stratum work
> [10:57:57] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:57] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:57] [THR0] Discarded work
> [10:57:57] Selecting MiningPoolHub [Groestl] for work
> [10:57:57] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:57] [THR0] Generated stratum merkle 2cc688c49a79ffaeac727e7cd347a20ce40471d522d09a8ede30c5051ce27928
> [10:57:57] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002cc688c49a79ffaeac727e7cd347a20ce40471d522d09a8ede30c5051ce279285a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:57] [THR0] Work job_id 2682 nonce2 5 ntime 5a2ae096
> [10:57:57] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:57] Generated stratum work
> [10:57:57] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:57] Init GPU thread 1 GPU 0 virtual GPU 0
> [10:57:57] CL Platform vendor: Advanced Micro Devices, Inc.
> [10:57:57] CL Platform name: AMD Accelerated Parallel Processing
> [10:57:57] CL Platform version: OpenCL 2.0 AMD-APP (1800.11)
> [10:57:57] Platform devices: 1
> [10:57:57]    0   Cayman
> [10:57:57] List of devices:
> [10:57:57]    0   Cayman
> [10:57:57] Selected 0: Cayman
> [10:57:57] 31.5 C  F: 24%(-1RPM)  E: 250MHz  M: 150Mhz  V: 0.900V  A: 0%  P: 0%
> [10:57:57] Preferred vector width reported 4
> [10:57:57] Max work group size reported 256
> [10:57:57] Maximum work size for this GPU (0) is 256.
> [10:57:57] Your GPU (#0) has 22 compute units, and all AMD cards in the 7 series or newer (GCN cards)         have 64 shaders per compute unit - this means it has 1408 shaders.
> [10:57:57] Max mem alloc size is 536870912
> [10:57:57] Using source file groestlcoin.cl
> [10:57:57] GPU 0: selecting lookup gap of 2
> [10:57:57] GPU 0: selecting thread concurrency of 2048
> [10:57:57] Setting worksize to 256
> [10:57:57] Using binary file groestlcoinCaymangw256l4.bin
> [10:57:57] Loaded binary image groestlcoinCaymangw256l4.bin
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024
> [10:57:57] Buffer sizes: 0 RW, 128 R
> [10:57:57] Using read buffer sized 128
> [10:57:57] Using output buffer sized 1024
> [10:57:57] initCl() finished. Found Cayman
> [10:57:57] [THR0] Get work blocked for 3 seconds
> [10:57:57] [THR1] Get work blocked for 3 seconds
> [10:57:57] [THR0] Got work from get queue
> [10:57:57] [THR1] Got work from get queue
> [10:57:57] [THR0] Generated target 000000000000000000000000000000000000000000000000000000ffff000000
> [10:57:57] [THR1] Generated target 000000000000000000000000000000000000000000000000000000ffff000000
> [10:57:59] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:59] [THR0] Discarded work
> [10:57:59] Selecting MiningPoolHub [Groestl] for work
> [10:57:59] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:59] [THR0] Generated stratum merkle 3399220e38b9dcd61484092e86d54ccab0a534c0ac16a8c016358de26a163679
> [10:57:59] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000003399220e38b9dcd61484092e86d54ccab0a534c0ac16a8c016358de26a1636795a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:59] [THR0] Work job_id 2682 nonce2 6 ntime 5a2ae096
> [10:57:59] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:59] Generated stratum work
> [10:57:59] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:59] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:59] [THR0] Discarded work
> [10:57:59] Selecting MiningPoolHub [Groestl] for work
> [10:57:59] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:57:59] [THR0] Generated stratum merkle c875b815e90feb52e6d62df9d1116aea53c750733d222ae9527a6a3acb535f40
> [10:57:59] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000c875b815e90feb52e6d62df9d1116aea53c750733d222ae9527a6a3acb535f405a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:57:59] [THR0] Work job_id 2682 nonce2 7 ntime 5a2ae096
> [10:57:59] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:57:59] Generated stratum work
> [10:57:59] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:59] 40.0 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 0%  P: 0%
> [10:58:00] API running in IP access mode on port 4028 (14920)
> [10:58:01] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:01] [THR0] Discarded work
> [10:58:01] Selecting MiningPoolHub [Groestl] for work
> [10:58:01] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:01] [THR0] Generated stratum merkle 7c7ced896644a67ab43f8462ce6cb2f40bfd9035be5cca6bc3178aec6671e1e6
> [10:58:01] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000007c7ced896644a67ab43f8462ce6cb2f40bfd9035be5cca6bc3178aec6671e1e65a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:01] [THR0] Work job_id 2682 nonce2 8 ntime 5a2ae096
> [10:58:01] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:01] Generated stratum work
> [10:58:01] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:01] [THR0] Staged work: total (2) > max (1), discarding
> [10:57:48] Started sgminer 5.6.1-nicehash-51                    
> [10:57:48] * using Jansson 2.7                    
> [10:57:48] Loaded configuration file awesome.conf                    
> [10:58:01] Selecting MiningPoolHub [Groestl] for work
> [10:57:48] Probing for an alive pool                    
> [10:57:51] Switching to MiningPoolHub [Lyra2REv2] - first alive pool                    
> [10:57:51] Startup GPU initialization... Using settings from pool MiningPoolHub [Lyra2REv2].                    
> [10:57:51] Startup Pool No = 2                    
> [10:57:51] MiningPoolHub [Lyra2REv2] difficulty changed to 256                    
> [10:57:51] MiningPoolHub [Groestl] alive, testing stability                    
> [10:57:51] MiningPoolHub [Groestl] difficulty changed to 3.500                    
> [10:57:51] Building binary lyra2rev2Caymangw256l4lgtc65536.bin                    
> [10:57:54] Initialising kernel lyra2rev2.cl with nfactor 10, n 1024                    
> [10:58:01] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:57:55] Building binary groestlcoinCaymangw256l4.bin                    
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024                    
> [10:57:57] Initialising kernel groestlcoin.cl with nfactor 10, n 1024                    
> [10:58:00] API running in IP access mode on port 4028 (14920)                    
> (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.000/m          
> [10:58:01] 41.0 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 0%  P: 0%
> [10:58:02] GPU 0 found something?
> [10:58:02] [THR1] OCL NONCE 7962b400 (2036511744) found in slot 0 (found = 255)
> [10:58:02] Found share with difficulty 1.426
> [10:58:02] New best share: 1.426
> [10:58:02]  Proof: 000000b38e668d6a8ad391a3d3b6775c3cdf0637a5a4a5992f1ff9f887ab543e
> Target: 0000004924492492492400000000000000000000000000000000000000000000
> TrgVal? no (false positive; hash > target)
> [10:58:02] GPU 0: Share above target
> [10:58:02] [THR1] Discarded cloned or rolled work
> [10:58:02] [thread 0: 13631488 hashes, 1709.1 khash/sec]
> [10:58:02] [thread 1: 13369344 hashes, 1676.1 khash/sec]
> [10:58:03] GPU 0 found something?
> [10:58:03] [THR1] OCL NONCE 1a89e200 (445243904) found in slot 0 (found = 255)
> [10:58:03] Found share with difficulty 1.074
> [10:58:03]  Proof: 000000ee69f875b1bc07a98e9ca442d373f329264ee0997043b6ae4c29800eb2
> Target: 0000004924492492492400000000000000000000000000000000000000000000
> TrgVal? no (false positive; hash > target)
> [10:58:03] GPU 0: Share above target
> [10:58:03] [THR1] Discarded cloned or rolled work
> [10:58:03] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:03] [THR0] Discarded work
> [10:58:03] Selecting MiningPoolHub [Groestl] for work
> [10:58:03] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:03] [THR0] Generated stratum merkle 2e40cb57329f35a174a247b2c1460cc014e43782c39ce6f79d76e1cfc6f5f198
> [10:58:03] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000002e40cb57329f35a174a247b2c1460cc014e43782c39ce6f79d76e1cfc6f5f1985a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:03] [THR0] Work job_id 2682 nonce2 10 ntime 5a2ae096
> [10:58:03] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:03] Generated stratum work
> [10:58:03] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:03] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:03] [THR0] Discarded work
> [10:58:03] Selecting MiningPoolHub [Groestl] for work
> [10:58:03] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:03] [THR0] Generated stratum merkle 368df274126ac69e83b43869a211718586c542119986eca83868248bf336aed1
> [10:58:03] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000368df274126ac69e83b43869a211718586c542119986eca83868248bf336aed15a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:03] [THR0] Work job_id 2682 nonce2 11 ntime 5a2ae096
> [10:58:03] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:03] Generated stratum work
> [10:58:03] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:03] 42.0 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 95%  P: 0%
> [10:58:04] Suspending stratum on MiningPoolHub [Lyra2REv2]
> [10:58:04] Closing socket for stratum MiningPoolHub [Lyra2REv2]
> [10:58:05] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:05] [THR0] Discarded work
> [10:58:05] Selecting MiningPoolHub [Groestl] for work
> [10:58:05] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:05] [THR0] Generated stratum merkle 6d26583fc147d91c77b0ab9a6b156afa4c2ddaa04cc19ea70008429b24e14a25
> [10:58:05] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e8000000006d26583fc147d91c77b0ab9a6b156afa4c2ddaa04cc19ea70008429b24e14a255a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:05] [THR0] Work job_id 2682 nonce2 12 ntime 5a2ae096
> [10:58:05] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:05] Generated stratum work
> [10:58:05] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:05] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:05] [THR0] Discarded work
> [10:58:05] Selecting MiningPoolHub [Groestl] for work
> [10:58:05] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:05] [THR0] Generated stratum merkle e9f4ac8c1453fb67046343b782a5346b60bece86d0d4fc9720877ea32045e8a8
> [10:58:05] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000e9f4ac8c1453fb67046343b782a5346b60bece86d0d4fc9720877ea32045e8a85a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:05] [THR0] Work job_id 2682 nonce2 13 ntime 5a2ae096
> [10:58:05] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:05] Generated stratum work
> [10:58:05] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:05] 42.5 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 98%  P: 0%
> [10:58:07] [THR0] Staged work: total (2) > max (1), discarding
> [10:58:07] [THR0] Discarded work
> [10:58:07] Selecting MiningPoolHub [Groestl] for work
> [10:58:07] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:07] [THR0] Generated stratum merkle da4ab0171132882e4a627f696e1abd2f4a080a3925640742787666ddf29d6adc
> [10:58:07] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e800000000da4ab0171132882e4a627f696e1abd2f4a080a3925640742787666ddf29d6adc5a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:07] [THR0] Work job_id 2682 nonce2 14 ntime 5a2ae096
> [10:58:07] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:07] Generated stratum work
> [10:58:07] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> (5s):1.848M (avg):2.247Mh/s | A:0  R:0  HW:0  WU:9.988/m          
> [10:58:07] [THR0] Discarded work
> [10:58:07] Selecting MiningPoolHub [Groestl] for work
> [10:58:07] [THR0] gen_stratum_work() - algorithm = groestlcoin
> [10:58:07] [THR0] Generated stratum merkle 23a9e93557e4456dd6ff7c27a9a9d3949d84ee6caf05b6e73ef14dbd342e9a01
> [10:58:07] [THR0] Generated stratum header 200000004001002198475b0ff8ec22cdc893e532fecbda8104e50993000f28e80000000023a9e93557e4456dd6ff7c27a9a9d3949d84ee6caf05b6e73ef14dbd342e9a015a2ae0961b22a59e00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
> [10:58:07] [THR0] Work job_id 2682 nonce2 15 ntime 5a2ae096
> [10:58:07] [THR0] Generated target 0000000000000000000000000000000000000000000024499224492449000000
> [10:58:07] Generated stratum work
> [10:58:07] [THR0] Pushing work from MiningPoolHub [Groestl] to hash queue
> [10:58:07] 42.5 C  F: 24%(-1RPM)  E: 830MHz  M: 1300Mhz  V: 1.100V  A: 98%  P: 0%
> [10:58:07] [thread 0: 13762560 hashes, 2745.1 khash/sec]
> [10:58:07] [thread 1: 13369344 hashes, 2667.2 khash/sec]

====================================================================================================
Stopping miner process ...
Stopping Mining Software
Diagnostics completed

I'll leave this one for patrike to look at (the Developer).

[tf2addict]

Using Claymore's CryptoNight miner, why won't the GPU list show accepted/rejected/HW error counts for each GPU?  Is the information not available through Claymore's API?  The total counts for that stuff is shown for the overall miner.

[STSMiner]

Does anyone use Awesome Miner with zpool?

Out of all of the alternatives, I am finding Awesome Miner with zpool to be my best alternative to Nicehash.... but...

After setting up Awesome Miner with zpool, I am only seeing my rig mining Neoscrypt. I believe I have it setup to auto switch... but I have only seen it mine Neoscrypt since I started. When I used Awesome Miner in the past with Nicehash, it switched much more often.

At first I could not complain because I was making a decent profit rate... but now it has dropped and I am concerned.

____

Also... Does Awesome Miner support xmr in any way? I don't see it.

I was making a decent profit by mining CryptoNight with xmr-stak-cpu with Nicehash.


Thank you for any help you can provide.

Awesome Miner will mine the algo that pays the most.

If you want to change that, visit here >>  http://www.awesomeminer.com/help.aspx

Algos Settings >> http://www.awesomeminer.com/help/addalgorithm.aspx
Any of thses with a checkmark in the box will be mined based on it's profit in USD via profit switching.

http://www.awesomeminer.com/help/profitswitching.aspx

Yes I am aware of all of this. I have read all of those links....

I am asking about the auto switching because 90% of the time Equihash was what Nicehash had me mining but it would still switch to other algorithms all the time for short term gains, and now that I am using Awesome Miner, the only thing I have mined is Neoscrypt.

I setup my managed profit miner just like the link says to and I chose zpool.... it just seems stuck on Neoscrypt.


Also.... is it possible to setup Awesome Miner to use xmr-stak-cpu to mine CryptoNight with my cpu?

Neoscrypt was paying more than the other algo's on Zpool, that's why it did not switch.
Neoscrypt is as I type this still paying higher than the other algo's at Zpool.

xmr-stak is being looked at by patrike, patrike is the developer for the software. News should follow soon on this.

[Add1ct3ddd]

I'm getting "Stratum extranonce answer id was not correct!" when trying to mine, any ideas??

It looks to be when trying to mine Blake2b

[patrike]

I'm getting "Stratum extranonce answer id was not correct!" when trying to mine, any ideas??

It looks to be when trying to mine Blake2b

This will be corrected in the next release that will be made available very soon.