With it not being against the rules; not much can be done unfortunately.

I might be mistaken but dont we have a few active Russians here in meta? I seem to recall a few things from the Russian board being brought here. Edit: only mention this board ad it seems to be the worst, but active locals from any board could do the same.

Maybe we can ask them to flag these account traders on this thread and DT can do what they do best... paint an untrustworthy account red.

That or get theymos to update the rule. I don't see this happening as it would be a rule that infringes on what someone can do with their "property".

That link should have worked. Looking st your activity today, you have 42. Myself I'm at 434, before I went to sleep I was at 420.

That tells me today is the day activity is calculated. So before today you would have had 28 activity and 1 merit. To be a junior member 30 activity is required, which you just hit.

Edit:  looking st your merit it was just received "today" that may have been the final thing needed. About a month agao it became a requirement to earn 1 merit to become a Jr. Member, thus was to combat sig. spam

Have either of them put miners in the hands of customers yet? I thought GMO was close as in this month, but that they were still preorder. 

I am interested in triple-1 but same as above I didn't think they had delivered a miner yet.

Maybe in an effort of fairness for current market sales I will add a general speculation section at the bottom for companies who have yet to deliver a miner but have announced competitive hardware.

So is this new   t2ti replacing the t2t+??

Agreed Haggs, I guess they are following bitmain with the the s9- i and j idea. They could say least use full words to differentiate the releases.

@minefarmbuy, You should explain to your contact that this is a marketing and customer support nightmare to keep releasing models in this fashion.

I have updated the OP.

@Thanks again Haggs, it wasn't until I re-read your review that I found where I missed the information for Whatsminer.

@Og, I added in a quick cost/TH. I'll get right on that super smart system, give me a year longer than the new forum software.


I completely forgot about Myrig. Updated, not sure how many they still have.

I think going forward, once hardware is only available on the secondary market I will remove all pricing data. Not the situation here but may be shortly.

---

Appreciate all the input. Honestly I had to do this because I found myself getting lost in what has or hasn't launched. Feel free to let me know anytime there is anything you feel is lacking or would make a good addition/update.

On mobile.

Thanks for the updated info. I'll update the whatsminer stuff this evening. I did have a tough time sorting through their chain. Missed something I guess.

I'll add a price per TH that's  no issue. With this being a global market. My idea is just keeping it basic based on from manufacturer. People can figure out the extra based on their situation, based on the links they follow.

I'll maintain the thread to within a few days, as best I can.

Can you elaborate on the T1's I just went by their webpage.

Not that I feel you need to explain yourself it's nice you give a heads up; or at least get a head of the whining.


Dont worry about it. I don't doubt you will moderate evenly and without prejudice of ideas. If people can't handle it, that's there problem, they need to adjust to the new normal that there is actually moderation in the section now. Time to clean up the shitty posting habits and have a real discussion.

I updated the section about hardware. Instead of listing the companies I linked a thread with a list if the curently competitive hardware with links to discussion, manufacturers and reviews.

Considering there are a lot of hats in the ring these days; I thought a comprehensive list was in order. Below you will find hardware listed by manufacturer. I'm going to try and limit it to competitive hardware, but feel free to suggest something else be added if you feel the list falls short.

The purpose of this thread is not for discussion; I will link all current discussion topics and available forum reviews.

Pricing and specs taken from manufacturer websites. For hardware not sold directly by the manufacturer you will see a "Where to purchase" link to their distributor. See reviews and discussion threads for real world tests. Know that all miners have a variance in power consumption and hashrate depending on conditions, these are noted in the discussion/review threads or Manufacturer websites.

Current Leader in Advertised Efficiency = Bitmain S17 Pro  .0395 J/GH                                                   AB = Asic Boost


                                                             1. Bitmain - S17 Pro    56 TH @  .0395 J/GH
                                                             2. Bitmain - S17+       67 TH @  .04     J/GH                                          
                                                             3. Innosilicon - T3       43 TH @  .048   J/GH                                                                                                        
                                                             3. MicroBT - M20S       68 TH @  .048   J/GH    * M20 @48, M20S @62/65 TH models also available at this efficiency
                                                             5. Bitmain - T17          40 TH @  .055   J/GH    * "+" model also available same efficiency @ 55TH                                                                                      
                                                             6. Canaan - A1041      31 TH @  .056   J/GH                                                                                                        
                                                             7. MicroBT - M21S       56 TH @  .060   J/GH    * M20 @ 28TH also available at this efficiency    
                                                             8. Canaan - A1047      37 TH  @ .0625  J/GH                      
                                                             9. MicroBT - M10         31 TH @  .065   J/GH          

*Miners in red draw 3KW+                                                                                              



Bitmain

S17 Pro - Normal mode, Low power and Turbo also available. * Requires 2 Power cables per unit

Efficiency ~.0395 J/GH              Hashrate = 53 TH/S               Power Consumption = 2094 W                  Cost/TH = 26.43 USD                 Requires AB enabled pool = No                
Cost before shipping/taxes/import fees = 1401 USD                        

Discussion Thread           Review Post until a review has been done

Hardware speculation: 5nm chips in 2020, no miners announced as of yet

Canaan

Current Miner - Avalon 1041 16nm - Turbo mode available  * similar efficiency acheived by the 1066 model review here

Efficiency ~.0625 J/GH               Hashrate = 37 TH/S                 Power Consumption = 2380 W                   Cost/TH = 27.83 USD                Requires AB enabled pool = No
Cost before shipping/taxes/import fees = 1030 USD  - This will vary as Canaan uses distributors for small batch purchases; as well as ship dates                          ** PSU included

Discussion Thread            Review

Hardware Speculation: Canaan Avalon 11xx series

Innosilicon

Current Miner - T3        * There are several batches of this miner confirm specs before ordering. There is an efficiency mode available.          

Efficiency ~.048 J/GH                 Hashrate = 43 TH/S                Power Consumption = 2100 W                     Cost/TH = 48.83 USD                Requires AB enabled pool = Yes
Cost before shipping/taxes/import fees = 2100 USD                          ** PSU included

Discussion thread             Review

Hardware Speculation: T3+ - 57TH @ 3300W slightly improved advertised efficiency

MicroBT

Current Miner - Whatsminer M20S 12nm  - Same efficiency available @ 62/65 TH, or M20 @ 45 TH

Efficiency ~.048 J/GH               Hashrate = 68 TH/S                  Power Consumption = 3260 W                     Cost/TH = 36.91 USD                 Requires AB enabled pool = No
Cost before shipping/taxes/import fees =  2510 USD (January pre-order)                         ** PSU included - Price is from Pangolinminer

Discussion Thread             Review
Where to purchase: https://whatsminer.net/ , https://pangolinminer.com

---

Previously Competitive hardware - If anything new is produced will update the list accordingly.

Bitfury

The B8 aka. Snowleopard A1 16nm(Unavailable)

Efficiency ~.131 J/GH              Hashrate = 50 TH/S                 Power Consumption = 6400W                   Cost/TH = xxx                           Requires AB enabled pool = No
Cost = Unavailable sold out

Currently no review or discussion threads.
Hardware Speculation: The Tardis has been announced @ .079 J/GH, and is being discussed here. *Most efficient option referenced

Ebang

Current Miner - E10  10nm(Unavailable)

Efficiency ~.09  J/GH                   Hashrate = 18 TH/S              Power Consumption = 1650 W                   Cost/TH = xxx                           Requires AB enabled pool = No
Cost = Unavailable Sold Out

Discussion thread - No review done

Hardware Speculation: They have announced their E11 series. Here is a discussion thread.

---

No longer in business

Bitfily

B1+ Snow Panther 10nm - MOQ 5 Units

Efficiency ~.086 J/GH                     Hashrate = 24.5 TH/S              Power Consumption = 2100W                   Cost/TH = 23.67 USD                Requires AB enabled pool = Yes
Cost = 580 USD (Current Sale Price)

Discussion Thread              There is no review at this time.
Hardware Speculation: None at this time

Halong Mining

Current Miner - Dragonmint T1 (Unavailable)

Efficiency ~.092 J/GH                   Hashrate = 16 TH/S              Power Consumption = 1480 W                   Cost/TH = 74.93 USD                 Requires AB enabled pool = Yes
Cost before shipping/taxes/import fees = 1199 USD

Discussion                           Review
Where to purchase: https://myrig.com/

No you can not. That would be ban evasion.

You were allowed to make a new account to come here and appeal the ban, but as you can see there is damning evidence of plagiarism.

So you can come, and look. You just can't post or send messages.

Why do I get the impression you read the thread title and didn't bother reading any of the replies?

If you had, you'd realize that none of that really relates to this situation.

Other than the smaller workspace I don't see any problem for a desktop user.

Personally though I don't mind scrolling up to see how the section I'm editing appears. My cursor stays where I was working and I just take a peak to make sure the correction is as I'd like.

Post a link to the banned profile.

You likely plagiarized content as it seems there was a bunch more bans handed out. There are no warnings. Now if your message has a timeframe included then it is a temporary ban.


It's up to you to figure out the rules of the forum before breaking them.


Great you won't do it again because you are banned, you can still read but can't post.


Edit: Counting this

See previous answers.

---

Just saving some time with my future quotes, wonder if they'll come true.
Looks like I'm 1 for 3 so far

Was the only word you put in your reply "poop" linked to the article??

Looks like a few of the posts where deleted from that thread. I can't really speak for the Moderator, but it could have been reported. Now had you typed more with that link to bring the turing test into context it may have stayed.

You could always just PM hellfish for clarification.

You broke the rules and were caught it's really that simple. I did however find somewhere you can go work if you meet there qualifications. The World Medical Association is okay with Plagiarism at least for the time being.

Here however it is taken seriously, because people try to cheat the system to earn som eBTC, or shit tokens whatever they can.


Can't say I've ever seen life described as fair. However you had the same opportunity as everyone else to read and understand the rules. You chose not to.

I doubt it was OgNasty as they had both left each other negative feedback, Og's to Lauda being February 14 of this year.

Given that I can't imagine Lauda had remained on the Og's trust list up until now.

---

That makes sense, must have been tagged early.

Looks like you are correct. I left my trust settings on default and Lauda does appear to have been excluded.

What would have happened is one of the dt1 level members that had added Lauda to their trust network must have removed Lauda. Pretty sure to become DT2 you need 3 DT1 members to add you.

That's my understanding anyways

---

Wondering how you noticed this so quickly, possibly an alt account that's no longer painted red?

Edit: Great explanation below, cleared it up for me a bit.

I remember it being 30 days from when you handed out the Smerit.

They don't come in a lump sum, so if you handed out 5 one day and 10 the next . 30 days from the first day you would be topped up with 5, and the following day you would receive another 10.

Can't remember where I saw that.

Edit: Stupid me deleted my post, reposting now


I think it was them or VOD, but it was early on probably first month or so.

Come on all blocks are beautiful, you just appreciate the ones that make you work for it more.

Not that I'd say no to a couple of quickies. 

Yeah I tried the logging in and out.

Then I tried being patient and took a walk. Everything seems to be working now; time to find those threads before they hide behind a hundred more that need to be reported.

It was just weird it was the first time I've had an issue like that I can remember. No biggie, locking the topic. Thanks for checking on your end folks.