robminer
Newbie
Offline
Activity: 10
Merit: 0
|
|
April 30, 2017, 06:07:06 PM |
|
Little Help?
Had an R9 280X GPU GPU laying around and decided to add it to a rig. This rig had (4) Radeon 390 (ASUS STRIX R9 390). The miner recognizes the card but errors out on "Cannot build OpenCL program for GPU 0"
Running Ubuntu 16.04
Any help or direction to look would be appreciated.
LOG 10:51:48:788 97059740 AMD Cards available: 5 10:51:48:788 97059740 GPU #0: Tahiti, 2520 MB available, 16 compute units 10:51:48:788 97059740 GPU #1: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #1 recognized as Radeon 390 10:51:48:789 97059740 GPU #2: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #2 recognized as Radeon 390 10:51:48:789 97059740 GPU #3: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #3 recognized as Radeon 390 10:51:48:789 97059740 GPU #4: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #4 recognized as Radeon 390 10:51:48:789 97059740 POOL/SOLO version 10:51:48:789 97059740 b343 10:51:48:789 97059740 Platform: Linux 10:51:48:867 97059740 start building OpenCL program for GPU 0... 10:51:48:868 97059740 done 10:51:48:968 97059740 Internal error: Input OpenCL binary is not for the target!
10:51:48:968 97059740 Cannot build OpenCL program for GPU 0 10:51:49:072 97059740 start building OpenCL program for GPU 1... 10:51:49:186 97059740 done 10:51:49:389 97059740 start building OpenCL program for GPU 2... 10:51:49:494 97059740 done 10:51:49:697 97059740 start building OpenCL program for GPU 3... 10:51:49:810 97059740 done 10:51:50:013 97059740 start building OpenCL program for GPU 4... 10:51:50:127 97059740 done
if memory serves amd have stopped supporting your card for linux, you'll need to use an older linux version [edit] https://askubuntu.com/questions/765616/amd-r9-280x-drivers-for-ubuntu-16-04Little Help?
Had an R9 280X GPU GPU laying around and decided to add it to a rig. This rig had (4) Radeon 390 (ASUS STRIX R9 390). The miner recognizes the card but errors out on "Cannot build OpenCL program for GPU 0"
Running Ubuntu 16.04
Any help or direction to look would be appreciated.
LOG 10:51:48:788 97059740 AMD Cards available: 5 10:51:48:788 97059740 GPU #0: Tahiti, 2520 MB available, 16 compute units 10:51:48:788 97059740 GPU #1: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #1 recognized as Radeon 390 10:51:48:789 97059740 GPU #2: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #2 recognized as Radeon 390 10:51:48:789 97059740 GPU #3: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #3 recognized as Radeon 390 10:51:48:789 97059740 GPU #4: Hawaii, 8139 MB available, 40 compute units 10:51:48:789 97059740 GPU #4 recognized as Radeon 390 10:51:48:789 97059740 POOL/SOLO version 10:51:48:789 97059740 b343 10:51:48:789 97059740 Platform: Linux 10:51:48:867 97059740 start building OpenCL program for GPU 0... 10:51:48:868 97059740 done 10:51:48:968 97059740 Internal error: Input OpenCL binary is not for the target!
10:51:48:968 97059740 Cannot build OpenCL program for GPU 0 10:51:49:072 97059740 start building OpenCL program for GPU 1... 10:51:49:186 97059740 done 10:51:49:389 97059740 start building OpenCL program for GPU 2... 10:51:49:494 97059740 done 10:51:49:697 97059740 start building OpenCL program for GPU 3... 10:51:49:810 97059740 done 10:51:50:013 97059740 start building OpenCL program for GPU 4... 10:51:50:127 97059740 done
if memory serves amd have stopped supporting your card for linux, you'll need to use an older linux version [edit] https://askubuntu.com/questions/765616/amd-r9-280x-drivers-for-ubuntu-16-04AltScope - Thanks for the help! Look like I am out of luck. No biggie
|
|
|
|
kostickole92
Newbie
Offline
Activity: 20
Merit: 0
|
|
April 30, 2017, 06:31:38 PM |
|
@Claymore,
Thanks for the hard work, I did got increase on my miner, 2 x Sapphire RX480 Nitro+ 8Gb Dual mining, Before ETC+DCR = 60.9 / 1645 MH/s Now ETC+DCR = 61.140 / 1711
Still fluctuating but I just started mining on 9.3, will check it later, need to go sleep, time now 03:31am South africa
My settings same as 9.2 except -dcri from 27 to 28 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -ethi 16 -dcri 28 -epool eu1-etc.ethermine.org:14444 -ewal "Wallet.Name" -epsw x -allpools 1 -mode 0 -dpool dcr-eu.coinmine.pl:2222 -dwal "User.Name" -dpsw x -asm 1
Keep the good stuff going!
what is your overcloack settings for this hash ?
|
|
|
|
Bones972
|
|
April 30, 2017, 07:12:14 PM |
|
Is there a way to ignore Nvidia GPU's and only use the AMD in my machine? (can't find it in the Readme)
It's a Frankenstein with 3x GTX1060 3gb and 1 MSI Armor RX 470 8gb. I have been mining Zec with it to pay the electric bill on my other rigs.
The RX card was a left over when I gave up trying to get 5 up and running on another AMD rig. Tossed it in here and its only getting 270 on Zec.
Would like to get it up and running on Eth while the 3 others do Zec.
Thanks
|
|
|
|
reflexmk
|
|
April 30, 2017, 07:32:15 PM |
|
Is there a way to ignore Nvidia GPU's and only use the AMD in my machine? (can't find it in the Readme)
It's a Frankenstein with 3x GTX1060 3gb and 1 MSI Armor RX 470 8gb. I have been mining Zec with it to pay the electric bill on my other rigs.
The RX card was a left over when I gave up trying to get 5 up and running on another AMD rig. Tossed it in here and its only getting 270 on Zec.
Would like to get it up and running on Eth while the 3 others do Zec.
Thanks
You can do that with -di x, check the readme file.
|
|
|
|
Bones972
|
|
April 30, 2017, 07:52:53 PM |
|
Is there a way to ignore Nvidia GPU's and only use the AMD in my machine? (can't find it in the Readme)
It's a Frankenstein with 3x GTX1060 3gb and 1 MSI Armor RX 470 8gb. I have been mining Zec with it to pay the electric bill on my other rigs.
The RX card was a left over when I gave up trying to get 5 up and running on another AMD rig. Tossed it in here and its only getting 270 on Zec.
Would like to get it up and running on Eth while the 3 others do Zec.
Thanks
You can do that with -di x, check the readme file. Yea I saw that but every time I go into the miner the GPU numbers are different? So I guess a better question is how can I tell what GPU is where and is there a way to set them in a specific order that will stick?
|
|
|
|
reflexmk
|
|
April 30, 2017, 07:54:04 PM |
|
Is there a way to ignore Nvidia GPU's and only use the AMD in my machine? (can't find it in the Readme)
It's a Frankenstein with 3x GTX1060 3gb and 1 MSI Armor RX 470 8gb. I have been mining Zec with it to pay the electric bill on my other rigs.
The RX card was a left over when I gave up trying to get 5 up and running on another AMD rig. Tossed it in here and its only getting 270 on Zec.
Would like to get it up and running on Eth while the 3 others do Zec.
Thanks
You can do that with -di x, check the readme file. Yea I saw that but every time I go into the miner the GPU numbers are different? So I guess a better question is how can I tell what GPU is where and is there a way to set them in a specific order that will stick? Cmon dude, only 4 options, do a trial and error
|
|
|
|
Wicard
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 30, 2017, 09:32:44 PM Last edit: April 30, 2017, 09:48:27 PM by Wicard |
|
@Claymore,
Thanks for the hard work, I did got increase on my miner, 2 x Sapphire RX480 Nitro+ 8Gb Dual mining, Before ETC+DCR = 60.9 / 1645 MH/s Now ETC+DCR = 61.140 / 1711
Still fluctuating but I just started mining on 9.3, will check it later, need to go sleep, time now 03:31am South africa
My settings same as 9.2 except -dcri from 27 to 28 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -ethi 16 -dcri 28 -epool eu1-etc.ethermine.org:14444 -ewal "Wallet.Name" -epsw x -allpools 1 -mode 0 -dpool dcr-eu.coinmine.pl:2222 -dwal "User.Name" -dpsw x -asm 1
Keep the good stuff going!
what is your overcloack settings for this hash ? Overclock settings Core Voltage = -48 Power Limit = +25 Core Clock = 1140 Memory Clock = 2220 Temp +-66 degree C http://funkyimg.com/i/2stpV.png
|
|
|
|
Elder III
|
|
April 30, 2017, 09:52:57 PM |
|
An RX460 4GB OC will be arriving soon, I'm betting +20MH/s on this $150 card. We'll see...
Those 1080's are like $1k?
In the USA at least the GTX 1080 can be had for under $500 and the GTX 1080 Ti is $700. I'm sure the 1080 Ti is $1000 or more in some countries that get hit hard with import taxes on PC hardware.
|
|
|
|
rawbot
|
|
April 30, 2017, 11:00:09 PM |
|
An RX460 4GB OC will be arriving soon, I'm betting +20MH/s on this $150 card. We'll see...
Those 1080's are like $1k?
In the USA at least the GTX 1080 can be had for under $500 and the GTX 1080 Ti is $700. I'm sure the 1080 Ti is $1000 or more in some countries that get hit hard with import taxes on PC hardware. In the UK the outrageous Brexit vote means that used b grade RX470 GPU's are now £30 more expensive than what we paid brand new for them in November. But hey, at least we didn't elect an sociopathic orangutan as POTUS lol.
|
|
|
|
Junkey
|
|
April 30, 2017, 11:04:16 PM |
|
So I just switched from ubuntu to win10. I am getting one card drop down to 4mh. From what I recall reading it's because there is no hdmi connection plugged into it. What is the fix for that on a system you want to remain headless?
|
|
|
|
Hypernova
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 01, 2017, 01:37:15 AM |
|
So I just switched from ubuntu to win10. I am getting one card drop down to 4mh. From what I recall reading it's because there is no hdmi connection plugged into it. What is the fix for that on a system you want to remain headless?
Ebay for HDMI dummy plugs.
|
|
|
|
RedRockMining
Member
Offline
Activity: 127
Merit: 10
|
|
May 01, 2017, 02:23:36 AM |
|
Claymore v9.3 + RX 580 + AMD Chipset and Graphics Drivers from 4/27 + latest Asrock firmware + W10 = only 14 Mh/s.
On the same system 390s ran at 28Mh/s and 480s at 24Mh/s.
Why the speed drop? Anyone else seeing this?
|
|
|
|
tribrzinec
Newbie
Offline
Activity: 11
Merit: 0
|
|
May 01, 2017, 02:39:59 AM |
|
Hello mining community, I would like to ask for some help. Recently bought a mining rig 6x RX 480 https://www.mindfactory.de/product_info.php/8GB-PowerColor-Radeon-RX-480-Red-Dragon-Aktiv-PCIe-3-0-x16--Retail-_1124443.html I am using Biostar TB85 motherboard, 12 GB RAM, EVGA 1300w, 120ssd, intel celeron 2x2.8GHz, windows 10 64. I have this problem. On minute after I start claymore miner hashrate on one card drop to 0 and I get report - GPU hangs in opencl call - Need to restart miner. I am searching for solution for couple of days already. - I tried different GPU drivers, if I try to install 17.3 or 17.4 crimson computer crash. - Virtual memory is on 16GB. - If I start a miner without this card which lost hashrate then same thing happen to other 5 cards, hashrate drop to 0 on all 5 cards. - I reinstall windows and all drivers, still same issue - I switch cables and cards, nothing positive happen. - tried other miners, pools, old version of claymore miner.. - tried function -gser -eser Tried probly everything i could find on google, still no solution. Not sure if that is specific problem of motherboard, graphic card? other parts are more or less standard mining parts and probly have nothing to do with that problem. Hop someone can help or give any proposition what should I do or try. Thank you Best regards
|
|
|
|
alucard20724
|
|
May 01, 2017, 02:43:02 AM |
|
Claymore v9.3 + RX 580 + AMD Chipset and Graphics Drivers from 4/27 + latest Asrock firmware + W10 = only 14 Mh/s.
On the same system 390s ran at 28Mh/s and 480s at 24Mh/s.
Why the speed drop? Anyone else seeing this?
make sure your RX 580 is running at the correct clocks. It sounds like it's underclocked. this will happen sometimes if you just install a new card without uninstalling and reinstalling the drivers. DDU FTW
|
|
|
|
RedRockMining
Member
Offline
Activity: 127
Merit: 10
|
|
May 01, 2017, 03:00:09 AM |
|
make sure your RX 580 is running at the correct clocks. It sounds like it's underclocked. this will happen sometimes if you just install a new card without uninstalling and reinstalling the drivers. DDU FTW [/quote] OMG, that worked! Thank you! I had MSI Afterburner running but I was only using it to undervolt and never changed the clock speed but it was not at the default speed for the 580. Back up to speed now! Thanks for the quick assist. Much appreciated!
|
|
|
|
alucard20724
|
|
May 01, 2017, 03:01:46 AM |
|
make sure your RX 580 is running at the correct clocks. It sounds like it's underclocked. this will happen sometimes if you just install a new card without uninstalling and reinstalling the drivers. DDU FTW OMG, that worked! Thank you! I had MSI Afterburner running but I was only using it to undervolt and never changed the clock speed but it was not at the default speed for the 580. Back up to speed now! Thanks for the quick assist. Much appreciated! i only know cause i speak from experience...
|
|
|
|
FFI2013
|
|
May 01, 2017, 03:31:49 AM |
|
which drivers work well with r9 and rx cards on my mixed card rig I have a 270 that no longer mines eth and was going to replace it with my odd ball rx470
I am using 16.11.5 I have a mixed rig with RX 470's (4GB Cards) and R9 270X (2GB cards) and when setup this way I am still getting 15MH/s out of the 270X's but without 1 470 per 270X the 270X's won't mine. My guess is that the Dag is being shared from the 4GB cards. Thanks I'll have to try it out I have gigabyte 270s and these have been running solid since LTC
|
|
|
|
dogjunior
|
|
May 01, 2017, 06:15:52 AM |
|
Hello mining community, I would like to ask for some help. Recently bought a mining rig 6x RX 480 https://www.mindfactory.de/product_info.php/8GB-PowerColor-Radeon-RX-480-Red-Dragon-Aktiv-PCIe-3-0-x16--Retail-_1124443.html I am using Biostar TB85 motherboard, 12 GB RAM, EVGA 1300w, 120ssd, intel celeron 2x2.8GHz, windows 10 64. I have this problem. On minute after I start claymore miner hashrate on one card drop to 0 and I get report - GPU hangs in opencl call - Need to restart miner. I am searching for solution for couple of days already. - I tried different GPU drivers, if I try to install 17.3 or 17.4 crimson computer crash. - Virtual memory is on 16GB. - If I start a miner without this card which lost hashrate then same thing happen to other 5 cards, hashrate drop to 0 on all 5 cards. - I reinstall windows and all drivers, still same issue - I switch cables and cards, nothing positive happen. - tried other miners, pools, old version of claymore miner.. - tried function -gser -eser Tried probly everything i could find on google, still no solution. Not sure if that is specific problem of motherboard, graphic card? other parts are more or less standard mining parts and probly have nothing to do with that problem. Hop someone can help or give any proposition what should I do or try. Thank you Best regards Have you tried bring up the cards one at a time in windows. Also depending on the alt coin you use crimson 15.12 for eth or for zcash crimson 16.12.2. Bring up the cards one at a time until you have all 6 going.
|
|
|
|
chronek
Sr. Member
Offline
Activity: 273
Merit: 250
BD People Are Legend
|
|
May 01, 2017, 06:22:58 AM |
|
Nice work with 9.3 , before i could oc rx480 4GB hynix memory only 1920-1950, now without peoblems can to 2080 at least (still samsung memory better with 9.2 and 9.3 to 2150 without problem) Who would want buy 8GB cards when 4GB do the same work...
|
|
|
|
GabryRox
|
|
May 01, 2017, 07:15:15 AM |
|
An RX460 4GB OC will be arriving soon, I'm betting +20MH/s on this $150 card. We'll see...
Those 1080's are like $1k?
In the USA at least the GTX 1080 can be had for under $500 and the GTX 1080 Ti is $700. I'm sure the 1080 Ti is $1000 or more in some countries that get hit hard with import taxes on PC hardware. In the UK the outrageous Brexit vote means that used b grade RX470 GPU's are now £30 more expensive than what we paid brand new for them in November. But hey, at least we didn't elect an sociopathic orangutan as POTUS lol. Hate to break it to you but that price rise in 470's (even used ones) probably has very little (if anything) to do with brexit. In fact, prices of both 470 & 480 have gone through the roof due to 1) phase out preparing for release of 500 series and 2) huge spike in demand for good mining GPUs since the huge spike in alt coin prices about 6 weeks ago. These 2 factors, combined with the fact that the early reviews on the 500 series GPUs are far from glowing (about same hash-rate with more power draw and big issues getting more than 4 GPUs to work per rig), mean that demand for 470/480 is probably near an all-time high, but of course, there is now very limited supply (esp new ones), so as a result, prices of sky-rocketed. Indeed, I tracked a few sales of used 470s on ebay recently and they went for about $20-$30 more than I paid for new ones about 4-5 weeks ago, just before this huge shortage began. The new ones are even tougher to get... many ebay and other 3rd party sellers are at least asking close to $300 already, and it seems likely that will go up given the issues with the 500 series. Even though I got a hold of enough 470s to fully stock my four 6-GPU rigs, I[m beginning to wish I would have scooped up a couple dozen for around the $160-$170 each they were only a couple months ago. Live and learn I guess...
|
|
|
|
|