Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[mshordja]

any feedback for stale shares? and what about incorrect shares?

Zero incorrects for 16 hours, 1% stale shares, sometimes 2% and sometimes 0%.

if these are the numbers are very promising

[1714114124]

1714114124

[1714114124]

1714114124

[john1010]

In your opinion guys, which is better version should i use 11, 11.2 or the new one? Hope that i can get your advice, thanks

[Omg9500]

I use 11.4 without any problems or errors hence I recommend 11.4

[john1010]

I use 11.4 without any problems or errors hence I recommend 11.4

Thanks I will give it a try. How about the stale share it will decrease or increase?

[Elange]

I use 11.4 without any problems or errors hence I recommend 11.4

Thanks I will give it a try. How about the stale share it will decrease or increase?

Don't know about stale shares, but going from V11.2 to V11.3 increased card fail rate for my AMD rigs (GPU hangs on OpenCL call). There was no hashrate rise, but 11.3 is less stable. Everyone's going for Phoenix miner anyways, it's much stable and much lower devfee heh. I can't upgrade to Phoenix because I run linux.

[_voyager_]

Is the Win 10 v.1709 mandatory for more than 8xAMD GPU or the newest Adrenaline Edition driver v.18 3.2 enough?

[53nsk]

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

[janding]

My experience with 11.4 and Stale Shares.
Arrow marks the spot where I upgraded from 11.3 to 11.4
The image is 11.3 to left of arrow and 11.4 to the right.

I would say this is a great success in reducing stale shares from 11.3 to 11.4
Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions.

I would say this is a complete success.

[Omg9500]

I cannot see any. Others apparently do...

[Omg9500]

https://i.imgur.com/EL9xHtp.gif

My experience with 11.4 and Stale Shares.
Arrow marks the spot where I upgraded from 11.3 to 11.4
The image is 11.3 to left of arrow and 11.4 to the right.

I would say this is a great success in reducing stale shares from 11.3 to 11.4
Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions.

I would say this is a complete success.

where do you get this graph?

[RYXES]

My experience with 11.4 and Stale Shares.
Arrow marks the spot where I upgraded from 11.3 to 11.4
The image is 11.3 to left of arrow and 11.4 to the right.

I would say this is a great success in reducing stale shares from 11.3 to 11.4
Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions.

I would say this is a complete success.

where do you get this graph?

Ethermine mining pool.

[janding]

My experience with 11.4 and Stale Shares.
Arrow marks the spot where I upgraded from 11.3 to 11.4
The image is 11.3 to left of arrow and 11.4 to the right.

I would say this is a great success in reducing stale shares from 11.3 to 11.4
Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions.

I would say this is a complete success.

where do you get this graph?

Ethermine mining pool.

Yes. Ethermine mining pool.

[androstan1234]

I love version 11.4, but it's annoying that Windows Defender sees it as a virus.  Just annoying, not a dealbreaker.

[Omg9500]

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

Question is at what hashrate your cards were running.... My Nitro+ RX580 are running at 1175/850 core and 2200/875 mem and output per card is 31.5 mh/s. this is from claymore 11.4

[Omg9500]

https://i.imgur.com/EL9xHtp.gif

My experience with 11.4 and Stale Shares.
Arrow marks the spot where I upgraded from 11.3 to 11.4
The image is 11.3 to left of arrow and 11.4 to the right.

I would say this is a great success in reducing stale shares from 11.3 to 11.4
Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions.

I would say this is a complete success.

where do you get this graph?

Ethermine mining pool.

Yes. Ethermine mining pool.

OK. I am on Nanopool.

[Elange]

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

Yep, same thing here, less stable. However, you can use the new -ethi X parameter to reduce intensity. Supposedly, with 11.2 higher intensity was introduced, producing better hashrate.

[BeerMan81]

Success here too, however all is not well just yet.

First, thanks for the stale shares fix on Ethermine, and the 1.5% improvement on hashrate.. We went from 4% to 1% stale shares and 5540 to 5625 MH/s (191 GPUs).

However, every hour (dev fee) there seems to be an issue where random rigs stop mining. Prior to 11.x I had roughly 10-12 days without downtime. This was still happening after upgrading to 11.4. Someone in ethOS chat mentioned that this is related to the new SSL stratum connection. After reverting to the old non-SSL port, the issue went away. So, if anyone is experiencing random mining stoppage, I would suggest you do the same.

Working great now! But, we need a reliable SSL connection. This was a great idea, and I look forward to being able to use it reliably in the future.

[nars28]

Switched to Phoenix miner after being years on Claymore. Phoenix is more lightweight, produces almost same hashrate and is more stable. Stale shares went drastically down. And Claymore had a huge problem for some of my rigs, it was switching between pools like crazy, constantly droping out the connection to main pool. Phoenix fixed this.

[53nsk]

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

Question is at what hashrate your cards were running.... My Nitro+ RX580 are running at 1175/850 core and 2200/875 mem and output per card is 31.5 mh/s. this is from claymore 11.4

Same as yours - 31.5 mh/s at 2240, now 30.1 mh/s at 2080.

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

Yep, same thing here, less stable. However, you can use the new -ethi X parameter to reduce intensity. Supposedly, with 11.2 higher intensity was introduced, producing better hashrate.

Thanks, gonna investigate this issue later and try ethi too.

[Omg9500]

One difference I discovered between v11.3 and 11.4: one of my cards shows temp. 58 C an the fan at 86% in claymore 11.3... in claymore 11.4 same card at temp 58 the fan is at 96%. settings in claymore TT 60 and FANMAX 85