Swedish ASIC miner company kncminer.com

[ElGabo]

I've posted this on KNC forum but I put it here to. It's about the FPGA issue

I received my jupiter yesterday. I've upgraded the firmware abd had the same problem. BUT I think it's not a faulty card. I have 6 connenction for the hashing cards at the mainboard. I spent all night (from Europe) to figure out what is the problem. If I connceted only 1 hashing card for example slot 1 it made 5Ghs but if I connected to slot 2, it went up for 140Ghs. All night I was playing with the variations of the cards and the slots and in my opinion this problem is not came from the hashing card itself. I think it comes from wrong fpga routing or something like that. I could make a variation with the cards what made 440Ghs stable and without this issue. Now I left on a variation that makes about 530Ghs but restarts every 5-10 minutes. I had to give up cause it was 3 o'clock in the night.

I've tried avery single hashing card and they ar works fine but it depending on wich slot.

If I plug in only 1 or 2 hashing cards the HW error about 5-7%, but if I plug in all four it runs up to 20%.

Today I will continue the playing and waiting for the new firmware.....

Sorry for my poor English but I hope it helps.

[1524633771]

1524633771

[naRky]

Just received my third Jupiter (Australia).

to give some indication on order #/payment date

Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6/10/13 - Ship Date: Oct 4th - Received Date: Oct 9th

I was in 1-500 group for a very low order # in that initial range prior to actual orders.

Edit: Also in regards to condition after about 8 different stops on their journey, total 'damage' 1 fan fallen off  

I am second day June 4 with order number 8xx..still in progress ...anyone else in the same boat?

i am also day 2 #16xx in progress from monday

reply from KnC yesterday:
The production of your order is almost finalized.
 
We will get back to you with shipping information shortly.

[nmat]

Update from a hosting customer:

I just received a 5BTC payment in my configured BTC address. I didn't receive a mail with hosting details and the miner is not online yet (at least I can't see it in my preconfigured pool).

[sickpig]

I've posted this on KNC forum but I put it here to. It's about the FPGA issue

I received my jupiter yesterday. I've upgraded the firmware abd had the same problem. BUT I think it's not a faulty card. I have 6 connenction for the hashing cards at the mainboard. I spent all night (from Europe) to figure out what is the problem. If I connceted only 1 hashing card for example slot 1 it made 5Ghs but if I connected to slot 2, it went up for 140Ghs. All night I was playing with the variations of the cards and the slots and in my opinion this problem is not came from the hashing card itself. I think it comes from wrong fpga routing or something like that. I could make a variation with the cards what made 440Ghs stable and without this issue. Now I left on a variation that makes about 530Ghs but restarts every 5-10 minutes. I had to give up cause it was 3 o'clock in the night.

I've tried avery single hashing card and they ar works fine but it depending on wich slot.

If I plug in only 1 or 2 hashing cards the HW error about 5-7%, but if I plug in all four it runs up to 20%.

Today I will continue the playing and waiting for the new firmware.....

keep up the good work bro! and don't forget to keep us posted.

Sorry for my poor English but I hope it helps.

don't worry mine is worst than yours but I post as long as I think I've something worth sharing

[Madazam]

Just received my third Jupiter (Australia).

to give some indication on order #/payment date

Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6/10/13 - Ship Date: Oct 4th - Received Date: Oct 9th

I was in 1-500 group for a very low order # in that initial range prior to actual orders.

Edit: Also in regards to condition after about 8 different stops on their journey, total 'damage' 1 fan fallen off  

I am second day June 4 with order number 8xx..still in progress ...anyone else in the same boat?

i am also day 2 #16xx in progress from monday

reply from KnC yesterday:
The production of your order is almost finalized.
 
We will get back to you with shipping information shortly.

This is getting ridiculous, the guy quoted had late orders and paid late and got his orders "received" not shipped but received before me ....i don't know how they are shipping but this seem to me a queue jump.....i ma unable to understand there logic or queue order....

[naRky]

Just received my third Jupiter (Australia).

to give some indication on order #/payment date

Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6/10/13 - Ship Date: Oct 4th - Received Date: Oct 9th

I was in 1-500 group for a very low order # in that initial range prior to actual orders.

Edit: Also in regards to condition after about 8 different stops on their journey, total 'damage' 1 fan fallen off 

I am second day June 4 with order number 8xx..still in progress ...anyone else in the same boat?

i am also day 2 #16xx in progress from monday

reply from KnC yesterday:
The production of your order is almost finalized.
 
We will get back to you with shipping information shortly.

This is getting ridiculous, the guy quoted had late orders and paid late and got his orders "received" not shipped but received before me ....i don't know how they are shipping but this seem to me a queue jump.....i ma unable to understand there logic or queue order....

me either

[loktang1125]

i think i did right, and the room temperature is 27degrees atm
i might let it run atm, i gotta set up the othe two

27 degrees is a lot. Try put some fan in front of your miner to help circulate the air in your room

hong kong is about 27 degrees today
i cant make the tem lower

[realtime]

Just received my third Jupiter (Australia).

to give some indication on order #/payment date

Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6/10/13 - Ship Date: Oct 4th - Received Date: Oct 9th

I was in 1-500 group for a very low order # in that initial range prior to actual orders.

Edit: Also in regards to condition after about 8 different stops on their journey, total 'damage' 1 fan fallen off 

I am second day June 4 with order number 8xx..still in progress ...anyone else in the same boat?

i am also day 2 #16xx in progress from monday

reply from KnC yesterday:
The production of your order is almost finalized.
 
We will get back to you with shipping information shortly.

This is getting ridiculous, the guy quoted had late orders and paid late and got his orders "received" not shipped but received before me ....i don't know how they are shipping but this seem to me a queue jump.....i ma unable to understand there logic or queue order....

me either

Sorry for any confusion my post cause to clarify I had 3 original 1-500 SKU orders.

"The desired goods: KNC Bitcoin miner numbers 1-500" placed on April 22nd, this is what KnC are honouring afaik.

My orders were stated as 'day 1 of production' prior to their dispatch.

[timmmers]

Just received my third Jupiter (Australia).

to give some indication on order #/payment date

Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6/10/13 - Ship Date: Oct 4th - Received Date: Oct 9th

I was in 1-500 group for a very low order # in that initial range prior to actual orders.

Edit: Also in regards to condition after about 8 different stops on their journey, total 'damage' 1 fan fallen off  

I am second day June 4 with order number 8xx..still in progress ...anyone else in the same boat?

i am also day 2 #16xx in progress from monday

reply from KnC yesterday:
The production of your order is almost finalized.
 
We will get back to you with shipping information shortly.

This is getting ridiculous, the guy quoted had late orders and paid late and got his orders "received" not shipped but received before me ....i don't know how they are shipping but this seem to me a queue jump.....i ma unable to understand there logic or queue order....

This may sound crazy, but 5/6 means something very different to me and to a Swede than to an american. To me that's 5th June, but in america it's 6th may? So 6/7 would be 7th june one way and 6th july the other?

I can't see any way they can be following any kind of order that leaves day 1 and 2 paid orders behind otherwise. I wonder how many or what % they have produced so far? That would be handy to get an idea. Also, maybe type of rig might come into it? Producing them in batches of one type maybe?

[robix]

@Bitcoinorama

What's going on at KnC. Shipping stagnated apparently, no hosting, no firmare update and in the end NO INFORMATION.

[realtime]

Just received my third Jupiter (Australia).

to give some indication on order #/payment date

Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6/10/13 - Ship Date: Oct 4th - Received Date: Oct 9th

I was in 1-500 group for a very low order # in that initial range prior to actual orders.

Edit: Also in regards to condition after about 8 different stops on their journey, total 'damage' 1 fan fallen off  

I am second day June 4 with order number 8xx..still in progress ...anyone else in the same boat?

i am also day 2 #16xx in progress from monday

reply from KnC yesterday:
The production of your order is almost finalized.
 
We will get back to you with shipping information shortly.

This is getting ridiculous, the guy quoted had late orders and paid late and got his orders "received" not shipped but received before me ....i don't know how they are shipping but this seem to me a queue jump.....i ma unable to understand there logic or queue order....

This may sound crazy, but 5/6 means something very different to me and to a Swede than to an american. To me that's 5th June, but in america it's 6th may? So 6/7 would be 7th june one way and 6th july the other?

I can't see any way they can be following any kind of order that leaves day 1 and 2 paid orders behind otherwise. I wonder how many or what % they have produced so far? That would be handy to get an idea. Also, maybe type of rig might come into it? Producing them in batches of one type maybe?

Second clarification on my dates.

Order #: 10XX - Payment Date: 5th June - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 5th June - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6th June - Ship Date: Oct 4th - Received Date: Oct 9th

Read my post above about pre-order from April.

[bronan]

I guess for me its again a loosing money like bfl, i see day 2 miners not even delivered and the difficulty keeps jumping upwards
The miner costed a small fortune and will never pay back what it costed again.
Income from pools has dropped so low thats almost scary, getting allready the 1 billion shares blocks more often then not
And security from bitcoin payements is next to absolute zero

This again proofs the whole bitcoin industry is for normal people a absolute no go

[trepex]

Update from a hosting customer:

I just received a 5BTC payment in my configured BTC address. I didn't receive a mail with hosting details and the miner is not online yet (at least I can't see it in my preconfigured pool).

I can confirm a payment of 2,5BTC (Saturn hosting user).

[RHA]

Upgrade 0.94 has been released.

[sickpig]

Upgrade 0.94 has been released.

again no changelog, thou

[Searing]

Upgrade 0.94 has been released.

again no changelog, thou

well you brave enough to pop it in yet and if so...whats the info on power use etc etc....(jeez I don't even have my Jupiter yet and still i'm curious)

[sickpig]

Upgrade 0.94 has been released.

again no changelog, thou

well you brave enough to pop it in yet and if so...whats the info on power use etc etc....(jeez I don't even have my Jupiter yet and still i'm curious)

as soon as I'll arrive to my colo, I'll test it and for sure I'll share my findings but don't hold your breath thou, I have to work for a living so I'll not be able to test till late afternoon

[Madazam]

Just received my third Jupiter (Australia).

to give some indication on order #/payment date

Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 6/5/13 - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6/10/13 - Ship Date: Oct 4th - Received Date: Oct 9th

I was in 1-500 group for a very low order # in that initial range prior to actual orders.

Edit: Also in regards to condition after about 8 different stops on their journey, total 'damage' 1 fan fallen off  

I am second day June 4 with order number 8xx..still in progress ...anyone else in the same boat?

i am also day 2 #16xx in progress from monday

reply from KnC yesterday:
The production of your order is almost finalized.
 
We will get back to you with shipping information shortly.

This is getting ridiculous, the guy quoted had late orders and paid late and got his orders "received" not shipped but received before me ....i don't know how they are shipping but this seem to me a queue jump.....i ma unable to understand there logic or queue order....

This may sound crazy, but 5/6 means something very different to me and to a Swede than to an american. To me that's 5th June, but in america it's 6th may? So 6/7 would be 7th june one way and 6th july the other?

I can't see any way they can be following any kind of order that leaves day 1 and 2 paid orders behind otherwise. I wonder how many or what % they have produced so far? That would be handy to get an idea. Also, maybe type of rig might come into it? Producing them in batches of one type maybe?

Second clarification on my dates.

Order #: 10XX - Payment Date: 5th June - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 10XX - Payment Date: 5th June - Ship Date: Oct 3rd - Received Date: Oct 8th
Order #: 14XX - Payment Date: 6th June - Ship Date: Oct 4th - Received Date: Oct 9th

Read my post above about pre-order from April.

I understand man mine was also a preorder and now order number is 8xx with paid before you on 4 June, so i was in line before you in order number in payment order and was also a preorder for which i don't remember the number but do remember it was very early ...now you have your units ....(by the way congrats on that) and mine are still in progress for last 3 days ...i just don't get it ....even if i ignore your orders completely ..i was day 2 production and still i am in progress after 9 day of production ..i just dont get it ...

[Rampion]

Upgrade 0.94 has been released.

I'm getting way more hardware errors with that, the miner I update was steadily hashing at 525GH/s (+3 hours average) and its now struggling to keep up to 500GH/s (just a few minutes hashing thou).

I'd not recommend upgrading if your miners are running fine. You know how we say, "if ain't broke..."

What they added to the webui is the temps, pretty scary stuff, ASIC slots preaking at 70 Celsius

[Searing]

[/quote]

I understand man mine was also a preorder and now order number is 8xx with paid before you on 4 June, so i was in line before you in order number in payment order and was also a preorder for which i don't remember the number but do remember it was very early ...now you have your units ....(by the way congrats on that) and mine are still in progress for last 3 days ...i just don't get it ....even if i ignore your orders completely ..i was day 2 production and still i am in progress after 9 day of production ..i just dont get it ...


[/quote]


er could it be the production line ramp up I heard they had 10 lines and expanding...could it be just the expansion of such throwing some lines ahead of others (I know zip about mnfg just saying)