Swedish ASIC miner company kncminer.com

[shottky82]

How does load-balance work? I can't get it working how else I try, tested everything, and no hashing or accepted shares when trying...
I'm a paid member...

Regards
Kim

[1714882093]

1714882093

[vegasguy]

How does load-balance work? I can't get it working how else I try, tested everything, and no hashing or accepted shares when trying...
I'm a paid member...

Regards
Kim

PM sent.

[hawkfish007]

Guys is there any ideas you would like to see in future releases? If you are not a paid member yet, what feature would cause you to become a paid member? For paid members , do you have any ideas we can implement to the current version?

Vegas

Would like to able to change wall efficiency when using 94% efficient PSU, when temp rises it automatically lowers clock speed, however, when temp goes down, it doesn't go back to initial speed? status page auto refresh? Just these few improvements for now, btw I bought the software on eBay. Thanks.

[GenTarkin]

Guys is there any ideas you would like to see in future releases? If you are not a paid member yet, what feature would cause you to become a paid member? For paid members , do you have any ideas we can implement to the current version?

Vegas

Would like to able to change wall efficiency when using 94% efficient PSU, when temp rises it automatically lowers clock speed, however, when temp goes down, it doesn't go back to initial speed? status page auto refresh? Just these few improvements for now, btw I bought the software on eBay. Thanks.

If your running an extremely early version it will not clock back up, correct. But if your running one of my later versions v99+ should be raising the clockspeed to where it was initially. But keep in mind, as a safety measure it does not start raising clocks until temps have lowered to 10% below the specified temp threshold, OTHERWISE it could get stuck in a loop of constantly raising, lowering, raising, lowering ..... due to it being on the "edge" of the specified temp.

Far as wall watts goes... I cant account for everyones power effeciency so, custom making builds for all effeciency variances across all miners is out of the question. I could perhaps *maybe* put in a one time box that allows u to set ur effeciency then after its set the box no longer appears(for cleanliness sake) OR I could just leave it there, but I dont want the interface getting cluttered LOL!

Status page already auto refreshes =)

[Prelude]

I'd also like to have an adjustable PSU efficiency option. I really don't think anyone is mining with such low (85%) efficency PSUs anyways! Personally I'm running 93.5%. Would be nice to have a box to adjust somewhere in the settings.

[vegasguy]

Im going to guess that most everyone uses very high quality/high efficiency PSU's. All mine are EVGA golds. Best config that is problem free is 3x 850w evga on batch 2s

Vegas

[GenTarkin]

I'd also like to have an adjustable PSU efficiency option. I really don't think anyone is mining with such low (85%) efficency PSUs anyways! Personally I'm running 93.5%. Would be nice to have a box to adjust somewhere in the settings.

Well, before I make any changes to wall watts .. I need a more concrete estimation sample size to make a more accurate guess of actual effeciency. Without that data its kinda pointless. Do you know your actual wall consumption? The more people that chime in on this the better!

[padrino]

Im going to guess that most everyone uses very high quality/high efficiency PSU's. All mine are EVGA golds. Best config that is problem free is 3x 850w evga on batch 2s

Vegas

It's all relative, of course.. When running EVGA's toward the maximum output they fade fast.. For example the EVGA 1300 G2 (Gold rated) are measured about 75% efficient at full load..

I use 220V PSUs (IBM 2880W units I sell in the marketplace) and measure about 94% even at near full load..

[vegasguy]

Ya, I heard they were the best as far as quality and stability. I know they have a 110v version too for us US people.

[GenTarkin]

Another reminder:
NOTE TO ALL!!!!! DO NOT USE the upgrade button status page. Its going to be removed from the next release.

Reason: Because the repo is now private, I made the public repo host just the details of the project and release history. So no actual files will be downloaded .. hopefully the upgrade button will just error out when trying to be used =)

[GenTarkin]

ANNOUNCING new release v.99d!!!!

Changes:

Code:

Added features: 
 1. Option in MINING tab to enable / disable API read only access from ALL ip addresses
 (Requires apply & bfgminer restart after changing).

Fixes:
 1. Changed HTML page titles for all webgui pages. Debranded them.
 2. Removed "UPGRADE" button from status page ... no longer used due to making repo private( no longer free )

This release will be available to paid users shortly via your login here:
http://bitcoinlasvegas.net/kncminer-titan-custom-firmware-mod-paid-membership-page/

Free/donation only users: this, and future, releases are not available to you unless you purchase the firmware.


Looking down the road, perhaps next release, will include language selection option starting w/ english & chinese for entire webgui.

[Searing]

Guys is there any ideas you would like to see in future releases? If you are not a paid member yet, what feature would cause you to become a paid member? For paid members , do you have any ideas we can implement to the current version?

Vegas

this is kinda lame..but i MISS my LCD on my 6 port setup..is their some kinda electronics dual port doogle ribbon or some such to plug the ribbon in and also on say another port on the ribbon plug the LCD in also ....I know this is kinda lame..but for you electronics type maybe their is such a thing as a two port ribbon or two port adapter for these types of ribbon plugs off the shelf that would work (likely not)

anyway now that you have all had a good chuckle (even if such exists ..I suspect you will all say NO NO NO NO NO to such an attempt)

that is all that comes to mind As I sit here turning the extra LCD around looking at it ( I badly need a life)

[vegasguy]

ANNOUNCING new release v.99d!!!!

Changes:

Code:

Added features: 
 1. Option in MINING tab to enable / disable API read only access from ALL ip addresses
 (Requires apply & bfgminer restart after changing).

Fixes:
 1. Changed HTML page titles for all webgui pages. Debranded them.
 2. Removed "UPGRADE" button from status page ... no longer used due to making repo private( no longer free )

This release will be available to paid users shortly via your login here:
http://bitcoinlasvegas.net/kncminer-titan-custom-firmware-mod-paid-membership-page/

Free/donation only users: this, and future, releases are not available to you unless you purchase the firmware.


Looking down the road, perhaps next release, will include language selection option starting w/ english & chinese for entire webgui.

Hi guys, I had to change hosting providers. The traffic we we getting overloaded my host..LOL. So yes, Im fully aware there are some troubles with logins and I am working on them every second. Hang in there , and Ill get this fixed very shortly. My apologies.

Vegas

[vegasguy]

Ok..sorry about that guys. I had to change hosts. Ive got everything back the way it was, and posted the new V99d . That was a necessary evil. My host just couldnt handle the traffic, but you will certainly notice a massive speed increase!!! There may be one or two users that might still be locked out if you registered with me in the last few days. If so, just register again and email me your userid on my site and Ill put you back in. For everyone else, go get em!!!

http://bitcoinlasvegas.net/kncminer-titan-custom-firmware-mod-paid-membership-page/

Vegas

[TXSteve]

ANNOUNCING new release v.99d!!!!

Changes:

Code:

Added features: 
 1. Option in MINING tab to enable / disable API read only access from ALL ip addresses
 (Requires apply & bfgminer restart after changing).

Fixes:
 1. Changed HTML page titles for all webgui pages. Debranded them.
 2. Removed "UPGRADE" button from status page ... no longer used due to making repo private( no longer free )

This release will be available to paid users shortly via your login here:
http://bitcoinlasvegas.net/kncminer-titan-custom-firmware-mod-paid-membership-page/

Free/donation only users: this, and future, releases are not available to you unless you purchase the firmware.


Looking down the road, perhaps next release, will include language selection option starting w/ english & chinese for entire webgui.

could you add Gaelic? and some keltic sound effects?  TIA

[Searing]

ANNOUNCING new release v.99d!!!!

Changes:

Code:

Added features: 
 1. Option in MINING tab to enable / disable API read only access from ALL ip addresses
 (Requires apply & bfgminer restart after changing).

Fixes:
 1. Changed HTML page titles for all webgui pages. Debranded them.
 2. Removed "UPGRADE" button from status page ... no longer used due to making repo private( no longer free )

This release will be available to paid users shortly via your login here:
http://bitcoinlasvegas.net/kncminer-titan-custom-firmware-mod-paid-membership-page/

Free/donation only users: this, and future, releases are not available to you unless you purchase the firmware.


Looking down the road, perhaps next release, will include language selection option starting w/ english & chinese for entire webgui.

could you add Gaelic? and some keltic sound effects?  TIA

KLINGON would be easier ..probably 12 folk on this thread alone that could translate into that!

(I mean bitcointalk is NERD Nirvana don't ya know..Klingon is a no brainer imho)

[TXSteve]

ANNOUNCING new release v.99d!!!!

Changes:

Code:

Added features: 
 1. Option in MINING tab to enable / disable API read only access from ALL ip addresses
 (Requires apply & bfgminer restart after changing).

Fixes:
 1. Changed HTML page titles for all webgui pages. Debranded them.
 2. Removed "UPGRADE" button from status page ... no longer used due to making repo private( no longer free )

This release will be available to paid users shortly via your login here:
http://bitcoinlasvegas.net/kncminer-titan-custom-firmware-mod-paid-membership-page/

Free/donation only users: this, and future, releases are not available to you unless you purchase the firmware.


Looking down the road, perhaps next release, will include language selection option starting w/ english & chinese for entire webgui.

could you add Gaelic? and some keltic sound effects?  TIA

KLINGON would be easier ..probably 12 folk on this thread alone that could translate into that!

(I mean bitcointalk is NERD Nirvana don't ya know..Klingon is a no brainer imho)

good idea except it would be illogical, as if Klingons need our help translating :|

[jelin1984]

Where I can find the PCI cable that split 2 PC e to 1

For Titan and Neptune miner??!,

I want to buy some

[LongAndShort]

Where I can find the PCI cable that split 2 PC e to 1

For Titan and Neptune miner??!,

I want to buy some

You could try here for a start.

https://bitcointalk.org/index.php?topic=563461.0

[jelin1984]

Ok thanks
I will try it