cognoscente
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 111
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 08:45:09 PM |
|
I think we have a bit of a communication disconnect going on here. I do not want " individually hand packaged for the odd request with pink bows and ribbons." I want them to simply ship me the boards (I can supply the pink bows and ribbons myself - thank you very much ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) All I'm saying is that I think their case design is substandard, and I will likely be throwing it in the trash as soon as it arrives. Why go through the bother (and I think extra chance for damage while shipping of those chips or boards attached only to the base of the case with no support from the top or sides as it seems to be.) Just put those boards into some well cushioned boxes and ship them. no need to assemble. If anything it would speed up shipping. They can just set the chips in the boards, test them for however long, then ship them. do you get me now? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I get you, I think it's too late in the day to be altering anything along a production line they already have oiled and refined, anything else would make me nervous. I don't think you can have a safer 'delivery box' than a metal case, and having the odd individual order requiring different packaging and shipping would deviate from the simplicity of manufacturing the same case for three identical units, with the same packaging and the same courier offering an agreed price structure. Perhaps if you requested this a couple of months back, but 2-3 weeks prior to them going balls out on manufacture and delivery? Why risk it? Just keep it simple, and the let the only changes here on in be soft tweaks increasing hardware efficiency. Sounds like you know what you want aesthetically and functionally, and you're happy to mod this yourself, although you'll prob void warranty, which is more than likely another reason for a singles case design amongst respective models. Good luck either way and keep us posted as to what you decide, but I doubt they'll make exception to shipping modules separate until they sell upgrades. If that's more cost efficient for peeps you may see hacks of the kit from peeps buying just the modules alone, again whether that has any warranty or not is yet to be seen, but in my opinion unlikely. I know Marcus wants to push the boards through their paces after shipping, but for the sake of September it's getting the beasties set-up safe and certain and in our hands...again good luck with whatever you choose bud, but for my eventual case, I want it to be a stand up arcade cab running MAME; loads of room for cooling options, a decent enough reason for 24/7 operation, a bit of a mod will allow a one button press revealing pool info and some err kinda stealth (if you can call something 6ft in height and black stealthy, unit visibility and noise will not be an issue at least). In any case I can squeeze a few units inside, power supply dependant. Also once it becomes less profitable I either have a shell for the next gen, and/or a MAME cab regardless. If the machine arrives with broken boards and fans flopping around it'll really suck. I'd gladly trade the case & assembly for a smooth ride through customs and a single day earlier delivery.
|
|
|
|
creativex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 08:57:19 PM |
|
Those would definitely work, but that seems a costly and time consuming solution, and as you mention, downtime is a big deal... ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F8Iq3UVU.gif&t=665&c=gn9H5WwILadd8w) I've used these in several custom builds. They're loud at max voltage, but they relocate a whole lot of air. Obviously they're very directional. http://www.nidecamerica.com/gamma30/gamma30.htm
|
|
|
|
Bitcoinorama
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 09:37:24 PM |
|
I think we have a bit of a communication disconnect going on here. I do not want " individually hand packaged for the odd request with pink bows and ribbons." I want them to simply ship me the boards (I can supply the pink bows and ribbons myself - thank you very much ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) All I'm saying is that I think their case design is substandard, and I will likely be throwing it in the trash as soon as it arrives. Why go through the bother (and I think extra chance for damage while shipping of those chips or boards attached only to the base of the case with no support from the top or sides as it seems to be.) Just put those boards into some well cushioned boxes and ship them. no need to assemble. If anything it would speed up shipping. They can just set the chips in the boards, test them for however long, then ship them. do you get me now? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I get you, I think it's too late in the day to be altering anything along a production line they already have oiled and refined, anything else would make me nervous. I don't think you can have a safer 'delivery box' than a metal case, and having the odd individual order requiring different packaging and shipping would deviate from the simplicity of manufacturing the same case for three identical units, with the same packaging and the same courier offering an agreed price structure. Perhaps if you requested this a couple of months back, but 2-3 weeks prior to them going balls out on manufacture and delivery? Why risk it? Just keep it simple, and the let the only changes here on in be soft tweaks increasing hardware efficiency. Sounds like you know what you want aesthetically and functionally, and you're happy to mod this yourself, although you'll prob void warranty, which is more than likely another reason for a singles case design amongst respective models. Good luck either way and keep us posted as to what you decide, but I doubt they'll make exception to shipping modules separate until they sell upgrades. If that's more cost efficient for peeps you may see hacks of the kit from peeps buying just the modules alone, again whether that has any warranty or not is yet to be seen, but in my opinion unlikely. I know Marcus wants to push the boards through their paces after shipping, but for the sake of September it's getting the beasties set-up safe and certain and in our hands...again good luck with whatever you choose bud, but for my eventual case, I want it to be a stand up arcade cab running MAME; loads of room for cooling options, a decent enough reason for 24/7 operation, a bit of a mod will allow a one button press revealing pool info and some err kinda stealth (if you can call something 6ft in height and black stealthy, unit visibility and noise will not be an issue at least). In any case I can squeeze a few units inside, power supply dependant. Also once it becomes less profitable I either have a shell for the next gen, and/or a MAME cab regardless. If the machine arrives with broken boards and fans flopping around it'll really suck. I'd gladly trade the case & assembly for a smooth ride through customs and a single day earlier delivery. Clearly the case is not a day long build, and a large aluminium case will protect more than bubble wrap. Disrupting the build process for the entire run, so a few can have their items shipped separate in bespoke packaging is not an option. I have a feeling broken boards and floppy fans is unlikely to be an issue, unless UPS drop kicks your mining kit. At least if the courier attempts that he is likely to break his ankle. Karma. I give up explaining the bleeding obvious. Good night. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
Make my day! Say thanks if you found me helpful ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp
|
|
|
vesperwillow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 09:47:03 PM |
|
I'd much rather mine ship in an aluminum case, even if I was going to discard it upon receipt. The last pallet I received from across the pond had a forklift arm stab through half the boxes while on some boat, and parts were spilling out the side as they wheeled it out to my truck. You can keep your cardboard boxes all you want.
SO yeah. Aluminum box ftw.
|
|
|
|
blastbob
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 09:54:13 PM |
|
yeah. hopefully we get 100% of what our contracts are worth soon.
emmanuel, any updates on your 110TH machines? we would love to hear about it.
thanks.
Hi, The plan is to keep adding servers over the next few weeks. The 110 Terahash mine is on schedule for deployment between the 26th to 30th this month. We are well on schedule. Worst case, July contract owners will be at 100 % capacity once the 110 Terahash mine comes online. As far as cloud hashing service companies go, we are the only ones paying out. Will keep you posted. Thanks Emmanuel I read that as cloudhashing is getting 110TH/s from knc equipment. What you guys think?
|
Bitrated user: blastbob.
|
|
|
The Avenger
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 10:34:39 PM |
|
Don't forget about air filters! I use furnace filter material for my PC's. Huge filter so it can get a bit dirty and still have good airflow. Clean is cooler ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Air filters - great suggestion! Nice to see someone offering positive ideas. I never even thought about filtering the air intake. Did a search, but I can only find small, pre-cut sizes on the ebay etc. I did find this, which looks like it would be big enough to cover the entire front of the KNC miner: http://ramair-filters.co.uk/automotive-accessories/air-filter-foam-material-universal-fitment.htmlIs this material the same as a furnace filter?
|
"I am not The Avenger" 1AthxGvreWbkmtTXed6EQfjXMXXdSG7dD6
|
|
|
erk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 10:44:03 PM |
|
yeah. hopefully we get 100% of what our contracts are worth soon.
emmanuel, any updates on your 110TH machines? we would love to hear about it.
thanks.
Hi, The plan is to keep adding servers over the next few weeks. The 110 Terahash mine is on schedule for deployment between the 26th to 30th this month. We are well on schedule. Worst case, July contract owners will be at 100 % capacity once the 110 Terahash mine comes online. As far as cloud hashing service companies go, we are the only ones paying out. Will keep you posted. Thanks Emmanuel O I read that as cloudhashing is getting 110TH/s from knc equipment. What you guys think? KNCMINER have not shipped any equipment so that's false. I would imagine the wafers have only just been completed if they taped out early July.
|
|
|
|
crumbs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 10:51:12 PM |
|
... Is this material the same as a furnace filter?
The automotive stuff is really restrictive -- do not want. Do an image search for "air conditioner foam filter" -- this stuff's really cheap & you can wash it & reuse it. Most HW stores carry it. Needs a screen/grill over the fan's intake (those old-skool wire ones are cheap & good), and then simply cut a rectangle slightly oversize & tape edges right to the case (or sandwich between two grills if you wanna be racy). The furnace filters are big (as in a couple of feet), usually disposable HVAC filters that you can cut up and use -- also really cheap but more of a pain. If you're hosting in a data center, you don't usually want filters (they usually filter their air, but maybe not everywhere).
|
|
|
|
AussieHash
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 11:03:52 PM |
|
yeah. hopefully we get 100% of what our contracts are worth soon.
emmanuel, any updates on your 110TH machines? we would love to hear about it.
thanks.
Hi, The plan is to keep adding servers over the next few weeks. The 110 Terahash mine is on schedule for deployment between the 26th to 30th this month. We are well on schedule. Worst case, July contract owners will be at 100 % capacity once the 110 Terahash mine comes online. As far as cloud hashing service companies go, we are the only ones paying out. Will keep you posted. Thanks Emmanuel I read that as cloudhashing is getting 110TH/s from knc equipment. What you guys think? 110TH from KnC = 275 Jupiters = $2 million dollars before VAT From the bflscam site I believe cloudhashing are based in USA so will not need to pay VAT, but will need to await shipping (I'll leave it up to you whether you believe one might buy a bfl minirig out the back door for $100,000) I trust KnC to be honest and fair, and that they will not allow queue jumpers. I doubt cloudhashing have prepaid $2million dollars, I expect they placed their order well after the first 500 units, and that KnC will deliver to them when their turn comes up. Also, I wonder who placed the order for 200 babyjets ? https://hashfast.com/order-chain/
|
|
|
|
The Avenger
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 11:46:15 PM Last edit: September 09, 2013, 12:00:07 AM by The Avenger |
|
... Is this material the same as a furnace filter?
The automotive stuff is really restrictive -- do not want. Do an image search for "air conditioner foam filter" -- this stuff's really cheap & you can wash it & reuse it. Most HW stores carry it. Needs a screen/grill over the fan's intake (those old-skool wire ones are cheap & good), and then simply cut a rectangle slightly oversize & tape edges right to the case (or sandwich between two grills if you wanna be racy). The furnace filters are big (as in a couple of feet), usually disposable HVAC filters that you can cut up and use -- also really cheap but more of a pain. Cool. I'll check this stuff out. The "box with fans" photo a while back, the inlet fans appear to be bequiet 140mm Silent Wings (as they have 9 blades). So I guess some kind of 140mm grill + even bigger filter would do the trick.
|
"I am not The Avenger" 1AthxGvreWbkmtTXed6EQfjXMXXdSG7dD6
|
|
|
The Avenger
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 10:53:34 AM |
|
OK, just been thinking about this problem for a bit and my best idea so far is to use a "double-decker" design. 2 hashing units, side-by-side, with the other two sitting on top. Allows for a cube type case, allows 4 intake fans (or perhaps just one big box-fan) and a very simple, straight-through airflow. Might not fit in a standard rack but it's incredibly more efficient and clean design.
Yeah, I'm thinking along these lines too. Just buy some off-the-shelf (boom boom!) shelves, power supply in the middle shelf, one unit on each of the other shelves with inlet fan fixed to the front. Cool as a breeze! Could easily mod something like this to the right size for unit + heatsink. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.ikea.com%2Fus%2Fen%2Fimages%2Fproducts%2Fexpedit-shelving-unit__72879_PE189130_S4.jpg&t=665&c=dt-YK8kb1jCYjA) I think I miss all the DIY gpu rigs ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) #modyourjupiter
|
"I am not The Avenger" 1AthxGvreWbkmtTXed6EQfjXMXXdSG7dD6
|
|
|
Bitcoinorama
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 11:20:26 AM |
|
OK, just been thinking about this problem for a bit and my best idea so far is to use a "double-decker" design. 2 hashing units, side-by-side, with the other two sitting on top. Allows for a cube type case, allows 4 intake fans (or perhaps just one big box-fan) and a very simple, straight-through airflow. Might not fit in a standard rack but it's incredibly more efficient and clean design.
Yeah, I'm thinking along these lines too. Just buy some off-the-shelf (boom boom!) shelves, power supply in the middle shelf, one unit on each of the other shelves with inlet fan fixed to the front. Cool as a breeze! Could easily mod something like this to the right size for unit + heatsink. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2FImage&t=665&c=B5gc8dggshYjuA) I think I miss all the DIY gpu rigs ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) #modyourjupiter Plenty of space in this: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Farcadecontrols.com%2Fimages%2Fcabinet_dimensions%2Fcentipede-upright.gif&t=665&c=tqqc0bG-3sk8Rw)
|
Make my day! Say thanks if you found me helpful ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp
|
|
|
The Avenger
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 12:12:01 PM |
|
OK, just been thinking about this problem for a bit and my best idea so far is to use a "double-decker" design. 2 hashing units, side-by-side, with the other two sitting on top. Allows for a cube type case, allows 4 intake fans (or perhaps just one big box-fan) and a very simple, straight-through airflow. Might not fit in a standard rack but it's incredibly more efficient and clean design.
Yeah, I'm thinking along these lines too. Just buy some off-the-shelf (boom boom!) shelves, power supply in the middle shelf, one unit on each of the other shelves with inlet fan fixed to the front. Cool as a breeze! Could easily mod something like this to the right size for unit + heatsink. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2FImage&t=665&c=B5gc8dggshYjuA) I think I miss all the DIY gpu rigs ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) #modyourjupiter Plenty of space in this: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Farcadecontrols.com%2Fimages%2Fcabinet_dimensions%2Fcentipede-upright.gif&t=665&c=tqqc0bG-3sk8Rw) Hmm, you mentioned this before. Have you thought it out? - Isn't the airflow going to be all over the place in such a big case? - Are you going to cut and drill the hell out of it to install inlet/outlet fans? It's gonna look a bit funny. - Does it still work as an arcade machine? If it does, probably won't for much longer when it starts to fill with hot air. - It's quite a big thing to have sitting around in a house, especially if it doesn't work. I'd want to keep the whole thing as compact as possible. But on the upside, no one is going to steal something that big and awkward. I hope you change the name on it to "Bitcoin Invaders" ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
"I am not The Avenger" 1AthxGvreWbkmtTXed6EQfjXMXXdSG7dD6
|
|
|
Bitcoinorama
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 12:23:37 PM |
|
OK, just been thinking about this problem for a bit and my best idea so far is to use a "double-decker" design. 2 hashing units, side-by-side, with the other two sitting on top. Allows for a cube type case, allows 4 intake fans (or perhaps just one big box-fan) and a very simple, straight-through airflow. Might not fit in a standard rack but it's incredibly more efficient and clean design.
Yeah, I'm thinking along these lines too. Just buy some off-the-shelf (boom boom!) shelves, power supply in the middle shelf, one unit on each of the other shelves with inlet fan fixed to the front. Cool as a breeze! Could easily mod something like this to the right size for unit + heatsink. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2FImage&t=665&c=B5gc8dggshYjuA) I think I miss all the DIY gpu rigs ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) #modyourjupiter Plenty of space in this: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimage&t=665&c=OXwIHJxOVycaNw) Hmm, you mentioned this before. Have you thought it out? - Isn't the airflow going to be all over the place in such a big case? - Are you going to cut and drill the hell out of it to install inlet/outlet fans? It's gonna look a bit funny. - Does it still work as an arcade machine? If it does, probably won't for much longer when it starts to fill with hot air. - It's quite a big thing to have sitting around in a house, especially if it doesn't work. I'd want to keep the whole thing as compact as possible. But on the upside, no one is going to steal something that big and awkward. I hope you change the name on it to "Bitcoin Invaders" ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) No mate, I've owned real ones in the past. This is precisely what they were back in the day - housings for huge cutting edge PCB boards (cutting edge in the 80's ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) - those things got hot, had to run 24/7 and had plenty of fans), they were pretty much server cases with large wells-gardner monitors and happ 8-way joysticks. Just these days you can have screens with less depth, larger speakers, and all the games ever created on a thumb drive powered by a tiny light weight processor. Air flow can be altered by adding shelving manipulating the circulation and extraction. You can separate the miners from the rest of the cab. After the miners become redundant, either replace them, keep the cab, or sell the unit on eBay. The only issue is those with unappreciative wives may have to think it through a little longer, these are a little less subtle than hiding the units in the discreet shelving solution posted before... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
Make my day! Say thanks if you found me helpful ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp
|
|
|
vesperwillow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 12:39:32 PM |
|
+1 to the coinop case. I say rock it. Maybe someone can make an arcade game where you use bitcoins and can win them back? That'd be neat as hell.
I miss those days. My dad used to work for one of the largest coinop/billiard leasing companies in my area. I'd get to preview and play games long before they hit the streets, and I'd get to play them for free at their warehouse. They would assemble them and let them sit for awhile before they got shipped out. Super fun.
I go into arcades these days and it's just not the same. Home game systems surpass the graphics by far, and the arcade world is really dying hard and fast. So many good memories.
|
|
|
|
djcoin
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 12:59:31 PM |
|
OK, just been thinking about this problem for a bit and my best idea so far is to use a "double-decker" design. 2 hashing units, side-by-side, with the other two sitting on top. Allows for a cube type case, allows 4 intake fans (or perhaps just one big box-fan) and a very simple, straight-through airflow. Might not fit in a standard rack but it's incredibly more efficient and clean design.
Yeah, I'm thinking along these lines too. Just buy some off-the-shelf (boom boom!) shelves, power supply in the middle shelf, one unit on each of the other shelves with inlet fan fixed to the front. Cool as a breeze! Could easily mod something like this to the right size for unit + heatsink. http://ImageI think I miss all the DIY gpu rigs ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) #modyourjupiter Plenty of space in this: http://imageHmm, you mentioned this before. Have you thought it out? - Isn't the airflow going to be all over the place in such a big case? - Are you going to cut and drill the hell out of it to install inlet/outlet fans? It's gonna look a bit funny. - Does it still work as an arcade machine? If it does, probably won't for much longer when it starts to fill with hot air. - It's quite a big thing to have sitting around in a house, especially if it doesn't work. I'd want to keep the whole thing as compact as possible. But on the upside, no one is going to steal something that big and awkward. I hope you change the name on it to "Bitcoin Invaders" ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) No mate, I've owned real ones in the past. This is precisely what they were back in the day - housings for huge cutting edge PCB boards (cutting edge in the 80's ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) - those things got hot, had to run 24/7 and had plenty of fans), they were pretty much server cases with large wells-gardner monitors and happ 8-way joysticks. Just these days you can have screens with less depth, larger speakers, and all the games ever created on a thumb drive powered by a tiny light weight processor. Air flow can be altered by adding shelving manipulating the circulation and extraction. You can separate the miners from the rest of the cab. After the miners become redundant, either replace them, keep the cab, or sell the unit on eBay. The only issue is those with unappreciative wives may have to think it through a little longer, these are a little less subtle than hiding the units in the discreet shelving solution posted before... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I'm mounting my KNC gear in my MAME / pinball cabs. (Not really, they're hosted, but would make a cool project) https://i.imgur.com/xkSkCz0.jpg?1
|
|
|
|
The Avenger
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 02:46:18 PM |
|
The only issue is those with unappreciative wives may have to think it through a little longer, these are a little less subtle than hiding the units in the discreet shelving solution posted before... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Wow, you are an asshole. Can't help taking a swipe can you? Only the worst type of people try to build themselves up by putting others down. Sad fucker. You are ignored.
|
"I am not The Avenger" 1AthxGvreWbkmtTXed6EQfjXMXXdSG7dD6
|
|
|
canth
Legendary
Offline
Activity: 1442
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 02:51:32 PM |
|
The only issue is those with unappreciative wives may have to think it through a little longer, these are a little less subtle than hiding the units in the discreet shelving solution posted before... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Wow, you are an asshole. Can't help taking a swipe can you? Only the worst type of people try to build themselves up by putting others down. Sad fucker. You are ignored. Dude...where the hell is this coming from? Are you off your meds?
|
|
|
|
Vedran Yoweri
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 106
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 03:17:29 PM |
|
The only issue is those with unappreciative wives may have to think it through a little longer, these are a little less subtle than hiding the units in the discreet shelving solution posted before... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Wow, you are an asshole. Can't help taking a swipe can you? Only the worst type of people try to build themselves up by putting others down. Sad fucker. You are ignored. Dude...where the hell is this coming from? Are you off your meds? Maybe it's not a dude, maybe it's 'that week of the month' ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
ASIC-K
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 280
Merit: 250
Hell?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 09, 2013, 03:31:48 PM |
|
Just wanted to let everyone know that if you use 50btc.com as your pool, i have created a KNCMiner team. Feel free to join up! As devices get delivered, im sure we can get near top of the list. come help out! https://50btc.com/teams/join-token/edb44c89487d44066dc8ea477ccb3400b11c7af7if the token doesnt work, just go to 50btc.com teams and search KNCMiner
|
|
|
|
|