shirkan
Member
Offline
Activity: 106
Merit: 10
|
|
February 07, 2017, 02:30:24 PM |
|
Hey shirkan what OS? I use Lubuntu 14.04 , i had some issues with 16.04 so go back to 14.04 which is waaaay easier for me. did you install CUDA 8 correctly?, try uninstall your current driver, install CUDA 8 and the driver provided with that version of cuda, and try there (i know it's old as fuck!) if it is no go, update the driver, but only if it does not work. check if you have libOpencl.so.1 and the proper symlink, most zcash miners will want that i have this intalled (it was necessary when i used ethereum and it is on my miners): sudo apt-get -y install software-properties-common sudo add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake sudo apt-get install libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y
I had to also do this because i got GLIBC errors: sudo add-apt-repository ppa:ubuntu-toolchain-r/test sudo apt-get update sudo apt-get install libstdc++6
also upgraded gcc and g++ 4.9 (dunno if it is required for EWBF but without it nheqminer did not compile and i was using nheqminer at the time, so i have it (if you install gcc-4.9 and g++-4.9 remember to replace the symlinks because it will still be pointing to the older one). again i am not sure it is necessary, i only tell you because i did it before and it could be part of the problem. Cuda version I use: release 8.0, V8.0.26 i know it's the beta pre release one, but it works, if it works, don't touch it!! Driver version: Driver 367.44 also, old i know, but it works, so i won't change it unless it stops working. this setup also works (and compile) perfectly with Genoil's ethereum miner and ccminer versions (tpruvot, sp_, alexis78) I don't know what of all that stuff (if any) will solve your problem but at least i give you some ammo to try, if you use 14.04. in 16.04 there is one library that was renamed: libjson-rpc-cpp-dev is now libjsonrpccpp-dev so keep that in mind if you get errors. hope it helps a little . indkt thanks man! I will try it on 14.04 and install libstdc as well. cheers!
|
|
|
|
CitricAcid
Newbie
Offline
Activity: 60
Merit: 0
|
|
February 07, 2017, 03:45:04 PM |
|
sorry newb question how to use that i already extract and and got 2 file miner and readme then i open terminal and change directory to folder with miner inside and type this ./miner --server eu1-zcash.flypool.org:3333 --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x --port 3333 --cuda_devices 0 1 2 3 but got ./miner: Permission denied
idk what should i do, i dont see any guide in first post,
drop the :3333 after flypool.org, keep the --port 3333 notation, this fixed it for me I think that this is a typo on the flypool's site. Also, don't need to list devices if you have just four: ./miner --server eu1-zcash.flypool.org --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x --port 3333 This has got to be something with my z wallet address or something... If I copy yours exactly, it will run.. if I place my wallet address in, it fails back to error 9 It works fine, when I put my zec wallet info in it goes back to code 9 There is big red warning on flypool : can not send to z adresses... I'm not that blind.... I am using a "t" address not a "z" address .. I was referring to z wallet as my zec wallet If it does not work with your address you can put mine in...no problem. Are you on win 10 or Ubuntu? If using ./miner --server eu1-zcash.flypool.org --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x --port 3333 It looks like ur syntax is incorrect. use ./miner --server eu1-zcash.flypool.org --port 3333 --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x Using win 10 pro 64 Here again I use your config line of: miner --server eu1-zcash.flypool.org --port 3333 --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x everything works fine if I use mine miner --server eu1-zcash.flypool.org --port 3333 --user t1dX1v8YiGdGsJCay9Vkiri4oAEddffPth3.rig1 --pass x I get the error code 9 I have reproduce the error code 1 and it is due to a bad internet connection. Try to troubleshoot the connection and/or verify if a firewall or antivirus and make sure to add an exclusion line in WINDOWS DEFENDER. My internet is a 300/20 low latency no jitter -- I have turned off my firewall, antivirus, and added an exclusion to windows defender, I still get error 9 If I remove my t address leave the default or the example above, it works perfectly, I put my t address in it fails... why would my t (zec) address not work ? it's the same one I am using on my main 7 gpu fury rig I would generate a new address for this rig. p.s. You are not using the same .rigname are you ? No, different rig name... and after all this testing I agree that I may need a new t wallet address, as to why I have NO IDEA!@ This is where my newness comes in, is there a way to get a new T wallet address? currently using the zec wallet (ver. 51) through ubunta Also, I wanted to say thanks to all for the assistance in talking/working this issue out.
|
|
|
|
sublimus
|
|
February 07, 2017, 08:57:57 PM |
|
idk what should i do, i dont see any guide in first post, [/quote]
drop the :3333 after flypool.org, keep the --port 3333 notation, this fixed it for me
I think that this is a typo on the flypool's site. Also, don't need to list devices if you have just four:
./miner --server eu1-zcash.flypool.org --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x --port 3333 [/quote]
[/quote] I would generate a new address for this rig. p.s. You are not using the same .rigname are you ? [/quote]
No, different rig name... and after all this testing I agree that I may need a new t wallet address, as to why I have NO IDEA!@ This is where my newness comes in, is there a way to get a new T wallet address? currently using the zec wallet (ver. 51) through ubunta
Also, I wanted to say thanks to all for the assistance in talking/working this issue out. [/quote]
Well I am not too savvy with Ubuntu wallets but usually you do that through the RECEIVE TAB of your wallet.
|
|
|
|
michael_phelps
|
|
February 07, 2017, 09:30:06 PM |
|
EWBF_,
Can you please compile a Windows (x86) version that supports older Compute 1.1 nVidia GPU's please??
I don't have much, but I could reimburse you with a few .x ZEC for you troubles.
Thanks in advance,
Phelps
|
|
|
|
EWBF_ (OP)
|
|
February 08, 2017, 02:30:46 PM |
|
EWBF_,
Can you please compile a Windows (x86) version that supports older Compute 1.1 nVidia GPU's please??
I don't have much, but I could reimburse you with a few .x ZEC for you troubles.
Thanks in advance,
Phelps
Hello! These cards have too few memory. Of course it is possible to change the algorithm and reduce memory usage, but this cards actually too slow. So i think this is waste of time and electricity.
|
|
|
|
CitricAcid
Newbie
Offline
Activity: 60
Merit: 0
|
|
February 08, 2017, 06:15:09 PM |
|
sorry newb question how to use that i already extract and and got 2 file miner and readme then i open terminal and change directory to folder with miner inside and type this ./miner --server eu1-zcash.flypool.org:3333 --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x --port 3333 --cuda_devices 0 1 2 3 but got ./miner: Permission denied
idk what should i do, i dont see any guide in first post,
drop the :3333 after flypool.org, keep the --port 3333 notation, this fixed it for me I think that this is a typo on the flypool's site. Also, don't need to list devices if you have just four: ./miner --server eu1-zcash.flypool.org --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x --port 3333 This has got to be something with my z wallet address or something... If I copy yours exactly, it will run.. if I place my wallet address in, it fails back to error 9 It works fine, when I put my zec wallet info in it goes back to code 9 There is big red warning on flypool : can not send to z adresses... I'm not that blind.... I am using a "t" address not a "z" address .. I was referring to z wallet as my zec wallet If it does not work with your address you can put mine in...no problem. Are you on win 10 or Ubuntu? If using ./miner --server eu1-zcash.flypool.org --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x --port 3333 It looks like ur syntax is incorrect. use ./miner --server eu1-zcash.flypool.org --port 3333 --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x Using win 10 pro 64 Here again I use your config line of: miner --server eu1-zcash.flypool.org --port 3333 --user t1NF6yLUxAAttibU8mzfX86o8aWLcqF38DX.rig1 --pass x everything works fine if I use mine miner --server eu1-zcash.flypool.org --port 3333 --user t1dX1v8YiGdGsJCay9Vkiri4oAEddffPth3.rig1 --pass x I get the error code 9 I have reproduce the error code 1 and it is due to a bad internet connection. Try to troubleshoot the connection and/or verify if a firewall or antivirus and make sure to add an exclusion line in WINDOWS DEFENDER. My internet is a 300/20 low latency no jitter -- I have turned off my firewall, antivirus, and added an exclusion to windows defender, I still get error 9 If I remove my t address leave the default or the example above, it works perfectly, I put my t address in it fails... why would my t (zec) address not work ? it's the same one I am using on my main 7 gpu fury rig I would generate a new address for this rig. p.s. You are not using the same .rigname are you ? No, different rig name... and after all this testing I agree that I may need a new t wallet address, as to why I have NO IDEA!@ This is where my newness comes in, is there a way to get a new T wallet address? currently using the zec wallet (ver. 51) through ubunta Also, I wanted to say thanks to all for the assistance in talking/working this issue out. So generated a new T address and everything works fine.. Very strange.. no code 9 no code 1, just starts working.
|
|
|
|
ciombat
Newbie
Offline
Activity: 18
Merit: 0
|
|
February 08, 2017, 07:55:27 PM |
|
Hello, what speeds on gtx 1060 3gb and 6gb ver??
|
|
|
|
PressEnterNoaw
Newbie
Offline
Activity: 16
Merit: 0
|
|
February 09, 2017, 12:13:40 AM |
|
Hello, what speeds on gtx 1060 3gb and 6gb ver?? Hallo EWBF_ and the rest of you guys! My numbers: 1060 3gb - 300 Sol/s +- 5 (OC with no Tdp limit) - all of them get what they deserve! 1060 6gb - 330 Sol/s +- 5 (OC with no Tdp limit) 1070 8gb - 460 Sol/s +- 5 (OC with no Tdp limit) 1080 8gb - 545 Sol/s +- 5 (OC with no TDP limit) OC: 1060's (3/6bg) - +135/140 Core, +600-625 mem, no tdp limit 1070's - +150 Core, +500-525 mem, no tdp limit 1080's - +130-140 Core, +550 mem (on all), no tdp limit Miner: 0.2.0b. and all cards uses "solver 0", and have been running since that ver. came out. OS: Using mainly Linux, Ubuntu 16.04.1 LTS. I also have 2 Win10 rigs running, and they are giving me almost the same results. 65 cards have been running stable since last miner update, and with a cool environment + good ventilation in the rig area most cards stay between 65-68c
|
|
|
|
Newton90
|
|
February 09, 2017, 04:27:45 AM |
|
EWBF,do you plan new version of the program with any speed improvements?
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
February 09, 2017, 07:13:10 AM |
|
EWBF,do you plan new version of the program with any speed improvements?
Even if you think that speed improvement can't be done, we would like to see proper logging (with filename for our choosing) and an API, come on man, give monitoring some love !
|
|
|
|
induktor
|
|
February 09, 2017, 03:31:16 PM |
|
API and logging would be nice indeed in the mean time you can do what i do, using --boff and 2>&1 | logger so i can see everything on /var/log/syslog , which is on ramdisk. i have a shitload of scripts that reads the syslog and extract data to the webpage and the LCD display of every rig I learn that from JK_14 thanks to his kopiemtu distro
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
February 09, 2017, 07:25:30 PM |
|
API and logging would be nice indeed in the mean time you can do what i do, using --boff and 2>&1 | logger so i can see everything on /var/log/syslog , which is on ramdisk. i have a shitload of scripts that reads the syslog and extract data to the webpage and the LCD display of every rig I learn that from JK_14 thanks to his kopiemtu distro Yeah you can do that on linux, but you don't have such option on windows sadly , also it's ok to have the "miner.log" but we should be able to choose the log name to allow proper log rotation & such. Also enhanced timestamps could help. Still a little json API shouldn't be that hard to do....
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
|
February 09, 2017, 07:59:16 PM |
|
EWBF,do you plan new version of the program with any speed improvements?
none dev care about speed, any reason clay is doing speed bumps is optiminer which is atm faster on AMD
|
|
|
|
sublimus
|
|
February 09, 2017, 08:48:32 PM |
|
EWBF,do you plan new version of the program with any speed improvements?
none dev care about speed, any reason clay is doing speed bumps is optiminer which is atm faster on AMD Really? Arent his shares depend on speed?
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
|
February 09, 2017, 10:52:49 PM |
|
EWBF,do you plan new version of the program with any speed improvements?
none dev care about speed, any reason clay is doing speed bumps is optiminer which is atm faster on AMD Really? Arent his shares depend on speed? no he only need to be 2% faster then the other miner....... thats all
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
February 09, 2017, 11:29:36 PM |
|
EWBF,do you plan new version of the program with any speed improvements?
none dev care about speed, any reason clay is doing speed bumps is optiminer which is atm faster on AMD Really? Arent his shares depend on speed? no he only need to be 2% faster then the other miner....... thats all Well more speed mean more money for him too, but i kinda doubt EWBF can squeeze more speed, he kinda said so many times since 0.2.0b was out, hence why now, i would like to see at least API/Logging if the speed can't be improved, or that he reduce his fees, because we should see recurrent improvements on miners that have fees.
|
|
|
|
oslak
|
|
February 11, 2017, 06:33:01 AM |
|
Is there a nofee option in this miner?
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
February 11, 2017, 10:19:43 AM |
|
Is there a nofee option in this miner?
Not at the moment.
|
|
|
|
Lucky - Luciano
|
|
February 11, 2017, 01:19:42 PM |
|
EWBF,do you plan new version of the program with any speed improvements?
none dev care about speed, any reason clay is doing speed bumps is optiminer which is atm faster on AMD Really? Arent his shares depend on speed? Of course it depends. Do not depend on your thoughts, perhaps? Have you ever heard that is not same 1000 and 100 000 ?
|
|
|
|
induktor
|
|
February 11, 2017, 01:51:37 PM |
|
API and logging would be nice indeed in the mean time you can do what i do, using --boff and 2>&1 | logger so i can see everything on /var/log/syslog , which is on ramdisk. i have a shitload of scripts that reads the syslog and extract data to the webpage and the LCD display of every rig I learn that from JK_14 thanks to his kopiemtu distro Yeah you can do that on linux, but you don't have such option on windows sadly , also it's ok to have the "miner.log" but we should be able to choose the log name to allow proper log rotation & such. Also enhanced timestamps could help. Still a little json API shouldn't be that hard to do.... True, Actually, my worry was that i cannot send status data to the display if i use windows, only with ccminer i can. even if i make a program for that, i can send GPU data (temperatures, target power limit) but i have no way of reading the amount of Sols ,so, you are right I am building custom frames for GPU miners to sell and they include LCD status displays, so yes, they usability is limited to linux only if you mine ZEC I do mine in linux so it's not problem for me but , for others....
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
|