PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[UnclWish]

I'm having a serious problem, All 8 of my RX580 8GB goes to 0.00Mh/s after an hour or so mostly when a new DAG is being created. It started happening only after I updated to Phoenix miner 5.2 (I am on Nicehash, Windows 10, AMD driver 20.7.2, also tried 20.9.2). My rig was stable from a month before updating Phoenix miner.  LOL miner works perfectly and TRM also works perfectly. Please Help!

Using Windows 10 1909, AMD 20.11.1 driver, PM 5.2c, nicehash, RX 580 8Gb cards - all fine. Miner works many hours without any problem.

[zergbitcore]

Version 5.2c still has low hashrate on my Radeon VII rig. 80MH/s instead of 91MH/s for several tasks on nicehash (sometimes 91MH/s sometimes 80MH/s).

[thatBeardoGuy]

I'm having a serious problem, All 8 of my RX580 8GB goes to 0.00Mh/s after an hour or so mostly when a new DAG is being created. It started happening only after I updated to Phoenix miner 5.2 (I am on Nicehash, Windows 10, AMD driver 20.7.2, also tried 20.9.2). My rig was stable from a month before updating Phoenix miner.  LOL miner works perfectly and TRM also works perfectly. Please Help!

Using Windows 10 1909, AMD 20.11.1 driver, PM 5.2c, nicehash, RX 580 8Gb cards - all fine. Miner works many hours without any problem.

Thanks for your reply, I want to ask how can you be on PM 5.2c ?, Nicehash software only updated it till 5.2b.  Also, can you please give some more details about your system: like the motherboard moel, Amount of RAM, Virtual memory and settings like PCIe link speed, and if you're using Overdrive N tool or MSI or both? And what parameters are you using with PM?

[UnclWish]

I'm having a serious problem, All 8 of my RX580 8GB goes to 0.00Mh/s after an hour or so mostly when a new DAG is being created. It started happening only after I updated to Phoenix miner 5.2 (I am on Nicehash, Windows 10, AMD driver 20.7.2, also tried 20.9.2). My rig was stable from a month before updating Phoenix miner.  LOL miner works perfectly and TRM also works perfectly. Please Help!

Using Windows 10 1909, AMD 20.11.1 driver, PM 5.2c, nicehash, RX 580 8Gb cards - all fine. Miner works many hours without any problem.

How can you be on PM 5.2c ?, Nicehash software only updated it till 5.2b.  Also, can you please give some more details about your system: like the motherboard moel, Amount of RAM, Virtual memory and settings like PCIe link speed, and if you're using Overdrive N tool or MSI or both?

I'm didn't use Nicehash software. I'm use PM miner with manual settings for nicehash pool.
Virtual memory is 8gb * amount of cards. I'm use modded vbioses.

You can update PM in nicehash. Just find folder with PM in nicehash folder and replace files.

[SpeedY_Hun]

Hello. There is a problem: There are several rigs composition; win10, cards RX 580 8Gb, mother Asrock 81, driver 20.9.1 If after rebooting immediately turn on Phoenix v5.2c then the speed from the card is 30mh/s, and if you first run the nanominer v1.12.0 and then Phoenix, the speed on fenex rises more than 32mh/s and keeps stable. If the rig is reloaded, it will be 30mh/s again. To get 32mh/s, the operation with the launch of the nano miner must be repeated and then again it will be 32mh/s. Currently, no additional parameters are registered. If you pre-launch the nano miner only on one map, then the speed will increase only on one map. If you put strap 1 on the map where the speed is already 32mh/s, then the speed drops to 30 mh/s. What could be the problem? Which parameter should I add or change? This pattern always works on different rigs.

20.8.1 will work

[volig]

Hello. There is a problem: There are several rigs composition; win10, cards RX 580 8Gb, mother Asrock 81, driver 20.9.1 If after rebooting immediately turn on Phoenix v5.2c then the speed from the card is 30mh/s, and if you first run the nanominer v1.12.0 and then Phoenix, the speed on fenex rises more than 32mh/s and keeps stable. If the rig is reloaded, it will be 30mh/s again. To get 32mh/s, the operation with the launch of the nano miner must be repeated and then again it will be 32mh/s. Currently, no additional parameters are registered. If you pre-launch the nano miner only on one map, then the speed will increase only on one map. If you put strap 1 on the map where the speed is already 32mh/s, then the speed drops to 30 mh/s. What could be the problem? Which parameter should I add or change? This pattern always works on different rigs.

20.8.1 will work

On the advice of the participants, I checked the work on the driver 20.4.2. Nothing changed, the problem remained. I think that the driver 20.8.1 will not change the situation. I'll check and let you know. Dear forum, this situation is only for me?

[bobben2]

Can confirm that 5.2c is working great with my RX 570  4Gb cards

Windows 10
Adrenalin 2019-Edition-18.12.3-Dec19 driver

2 x Sapphire Pulse Rx 570 4Gb cards mining ETH at 1100/2000 core/mem

hashrate now 29.9MH/s
hashrate before the DAG limitation: 30.3MH/s

[7anonminer7]

Can confirm that 5.2c is working great with my RX 570  4Gb cards

Windows 10
Adrenalin 2019-Edition-18.12.3-Dec19 driver

2 x Sapphire Pulse Rx 570 4Gb cards mining ETH at 1100/2000 core/mem

hashrate now 29.9MH/s
hashrate before the DAG limitation: 30.3MH/s

Happy for you. Could you please post your config settings? As you can see from my post I get 0 MH/s for my 4 x RX570 4G and I had to switch to lolminer which is unstable:

Hello.

I'm using PhoenixMiner 5.2c on Windows 10 with Adrenaline 19.7.5 drivers,  4 x 570RX 4GB cards in "compute mode" (VGA output connected to intergrated Intel GPU) with following settings:

Code:

-acm
-eres 1
-lidag 2
-tt -60,-45,-60,-60
-cclock 1050,1050,1050,1050
-cvddc 900,950,900,900
-mclock 1970,1970,1970,1970
-mvddc 850,850,850,850
-daglim 3990

Yet after DAG generation I get 0 Mh/s on every card, please advise what could be wrong, thank you.

PS. https://pastebin.com/Mb1asrvP <- the the log - I couldn't pinpoint anything strange or any errors that are in there though.

[FloppyPurpleGherkin]

Linux ETA?

[batsonxl]

Mr. Phoenix
 will this miner supports new coming ETC hardfork or will be new version? sorry asking this question again.
  thanks adding rxboost but please is there anyway inject straps for polaris cards? then phoenix will be best miner in the WORLD! some of my polaris cards i have trouble and really dont wanna mod them, will ultra super to get good speeds.thanks

[HardSign]

please, we need Linux version!

[Kiawpqe]

GPU1: 68C 54% 86W, GPU2: 68C 53% 95W, GPU3: 68C 48% 91W, GPU4: 68C 34% 84W, GPU5: 65C 26% 86W, GPU6: 68C 44% 84W, GPU7: 67C 71% 94W
GPU1: cclock 1200 MHz, cvddc 868 mV, mclock 2113 MHz
GPU2: cclock 1200 MHz, cvddc 868 mV, mclock 2113 MHz
GPU3: cclock 1200 MHz, cvddc 868 mV, mclock 2113 MHz
GPU4: cclock 1200 MHz, cvddc 868 mV, mclock 2115 MHz
GPU5: cclock 1200 MHz, cvddc 868 mV, mclock 2113 MHz
GPU6: cclock 1200 MHz, cvddc 868 mV, mclock 2113 MHz
GPU7: cclock 1200 MHz, cvddc 868 mV, mclock 2110 MHz
GPUs power: 620.1 W; cost: 2.23 USD/day

*** 0:09 *** 11/15 21:09 **************************************
Eth: Mining ETC on ssl://eu1-etc.ethermine.org:5555 for 0:09
Eth: Accepted shares 24 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 6 (20.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 216.0 GH (!)
Eth: Average speed (5 min): 220.407 MH/s
Eth: Effective speed: 177.12 MH/s; at pool: 177.12 MH/s

Eth speed: 220.472 MH/s, shares: 24/0/6, time: 0:09
GPUs: 1: 32.380 MH/s (4/2) 2: 32.380 MH/s (6/1) 3: 32.374 MH/s ( 4: 26.368 MH/s (2) 5: 32.384 MH/s (0) 6: 32.384 MH/s (2/3) 7: 32.202 MH/s (2)
Eth: New job #99a608fe from ssl://eu1-etc.ethermine.org:5555; diff: 4000MH
Eth speed: 220.454 MH/s, shares: 24/0/6, time: 0:09
GPUs: 1: 32.379 MH/s (4/2) 2: 32.377 MH/s (6/1) 3: 32.371 MH/s ( 4: 26.366 MH/s (2) 5: 32.378 MH/s (0) 6: 32.380 MH/s (2/3) 7: 32.203 MH/s (2)
Eth speed: 220.437 MH/s, shares: 24/0/6, time: 0:09
GPUs: 1: 32.373 MH/s (4/2) 2: 32.377 MH/s (6/1) 3: 32.367 MH/s ( 4: 26.364 MH/s (2) 5: 32.379 MH/s (0) 6: 32.378 MH/s (2/3) 7: 32.199 MH/s (2)
Eth: GPU5: ETH share found!
Eth: Share actual difficulty: 14.4 GH (!)
Eth: Share accepted in 33 ms
Eth speed: 220.442 MH/s, shares: 25/0/6, time: 0:09
GPUs: 1: 32.375 MH/s (4/2) 2: 32.376 MH/s (6/1) 3: 32.370 MH/s ( 4: 26.368 MH/s (2) 5: 32.379 MH/s (1) 6: 32.376 MH/s (2/3) 7: 32.198 MH/s (2)
Eth: New job #4305b45a from ssl://eu1-etc.ethermine.org:5555; diff: 4000MH
Eth: New job #59690352 from ssl://eu1-etc.ethermine.org:5555; diff: 4000MH
Eth: New job #1f263436 from ssl://eu1-etc.ethermine.org:5555; diff: 4000MH
Eth speed: 220.457 MH/s, shares: 25/0/6, time: 0:09
GPUs: 1: 32.376 MH/s (4/2) 2: 32.377 MH/s (6/1) 3: 32.374 MH/s ( 4: 26.370 MH/s (2) 5: 32.379 MH/s (1) 6: 32.381 MH/s (2/3) 7: 32.199 MH/s (2)

 


NEW CONFIG:

-rxboost 1
-vmr  85,85,85,0,85,85,85
-gt 66
-rmode 1
-tt 68
-eres 100
-proto 3
-cdm 2
-hstats 2
-amd
-acm
-wdog 1
-log 0
-gpow 100,100,100,100,100,100,100
-coin etc
-minRigSpeed 190
-prate 0.15
-gpus 1,2,3,4,5,6,7
-cclock 1200,1200,1200,1200,1200,1200,1200
-cvddc 855,855,855,855,855,855,855
-mclock 2113,2113,2113,2115,2113,2113,2110
-mvddc 865,865,865,865,865,865,865
-pool ssl://eu1-etc.ethermine.org:5555
-wal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-mt 0

7-Rx 580 8gb
PhoenixMiner 5.2c

Gpu 4 with monitor
only psu EVGA-1000watt Supernova G3

 

[jelome198959]

2080 Ti owners what hash are you getting? I'm maxing out at 62mh/s @+1000mem with T-rex. Don't have access to rig right now but I'm interested at what PhoenixMiner can do.

[MetalHelmet]

PhoenixMiner 5.2c (still beta) is ready with speed improvement for AMD 4 GB cards. You can download PhoenixMiner 5.2c from here (this is only the Windows version, the Linux version will be ready in a few days):

Updated Nvidia drivers to 457.30 and PhoenixMiner 5.2c do not start. Trying with start_miner.bat and miner do not starts...

Code:

C:\Mining\PhoenixMiner\PhoenixMiner_5.2c_Windows>PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
Phoenix Miner 5.2c Windows/msvc - Release build
-----------------------------------------------

CUDA version: 11.0, CUDA runtime: 8.0

C:\Mining\PhoenixMiner\PhoenixMiner_5.2c_Windows>pause

[batsonxl]

Eth speed: 220.442 MH/s, shares: 25/0/6, time: 0:09

[/quote]

you have 6 incorrect shares only in 25 it makes 36% incorrect shares. not good. why you use -rxboost and -vmr, better get less hashrate but correct shares, you lose more when you have too many incorrect shares.

[Trojan69]

Anybody using 1070? Two years ago all of the 1070s were pushing a constant 30-32 mh/s. Now, only one (EVGA) of them is pushing 29 mh/s, the rest (AERO MSI) are in the low 22-23 mh/s. I understand the 1070s are affected by the increased DAG size as well as nvidia's drivers. However, how come one of my card still pushes similar numbers to two years ago, is the EVGA using a more efficient memory or what causes this? I've tweaked mem/clock and TDP but nothing. Thanks.

OS: Win 10
Newest Nividia drivers
Latest/Beta PM.
Straps/vrtimings, etc. all applied

[Kiawpqe]

Eth speed: 220.442 MH/s, shares: 25/0/6, time: 0:09

you have 6 incorrect shares only in 25 it makes 36% incorrect shares. not good. why you use -rxboost and -vmr, better get less hashrate but correct shares, you lose more when you have too many incorrect shares.
[/quote]




*** 0:24 *** 11/16 00:05 **************************************
Eth: Mining ETC on ssl://eu1-etc.ethermine.org:5555 for 0:24
Eth: Accepted shares 76 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 867.4 GH (!)
Eth: Average speed (5 min): 221.727 MH/s
Eth: Effective speed: 210.67 MH/s; at pool: 210.67 MH/s

Eth speed: 222.105 MH/s, shares: 76/0/0, time: 0:24
GPUs: 1: 32.455 MH/s (15) 2: 32.495 MH/s (6) 3: 32.493 MH/s (10) 4: 27.245 MH/s (5) 5: 32.457 MH/s (14) 6: 32.459 MH/s (11) 7: 32.501 MH/s (15)
GPU1: 68C 59% 86W, GPU2: 67C 57% 95W, GPU3: 68C 46% 92W, GPU4: 68C 36% 86W, GPU5: 65C 27% 87W, GPU6: 68C 42% 84W, GPU7: 68C 73% 95W
GPU1: cclock 1200 MHz, cvddc 875 mV, mclock 2110 MHz
GPU2: cclock 1200 MHz, cvddc 875 mV, mclock 2110 MHz
GPU3: cclock 1200 MHz, cvddc 875 mV, mclock 2110 MHz
GPU4: cclock 1200 MHz, cvddc 875 mV, mclock 2110 MHz
GPU5: cclock 1200 MHz, cvddc 875 mV, mclock 2110 MHz
GPU6: cclock 1200 MHz, cvddc 875 mV, mclock 2110 MHz
GPU7: cclock 1200 MHz, cvddc 875 mV, mclock 2110 MHz
GPUs power: 625.5 W; cost: 2.25 USD/day
Eth speed: 222.124 MH/s, shares: 76/0/0, time: 0:24
GPUs: 1: 32.457 MH/s (15) 2: 32.498 MH/s (6) 3: 32.494 MH/s (10) 4: 27.257 MH/s (5) 5: 32.458 MH/s (14) 6: 32.460 MH/s (11) 7: 32.500 MH/s (15)
Eth: GPU3: ETH share found!
Eth: Share actual difficulty: 4425 MH
Eth: Share accepted in 33 ms
Eth: New job #baf57729 from ssl://eu1-etc.ethermine.org:5555; diff: 4000MH
Eth speed: 222.102 MH/s, shares: 77/0/0, time: 0:24
GPUs: 1: 32.453 MH/s (15) 2: 32.495 MH/s (6) 3: 32.493 MH/s (11) 4: 27.247 MH/s (5) 5: 32.455 MH/s (14) 6: 32.458 MH/s (11) 7: 32.500 MH/s (15)
Eth speed: 222.100 MH/s, shares: 77/0/0, time: 0:24
GPUs: 1: 32.452 MH/s (15) 2: 32.494 MH/s (6) 3: 32.494 MH/s (11) 4: 27.252 MH/s (5) 5: 32.452 MH/s (14) 6: 32.459 MH/s (11) 7: 32.497 MH/s (15)
Eth: GPU1: ETH share found!
Eth: Share actual difficulty: 6672 MH
Eth: Share accepted in 32 ms
Eth speed: 222.101 MH/s, shares: 78/0/0, time: 0:24
GPUs: 1: 32.452 MH/s (16) 2: 32.493 MH/s (6) 3: 32.494 MH/s (11) 4: 27.257 MH/s (5) 5: 32.452 MH/s (14) 6: 32.458 MH/s (11) 7: 32.495 MH/s (15)
Eth speed: 222.131 MH/s, shares: 78/0/0, time: 0:24
GPUs: 1: 32.456 MH/s (16) 2: 32.497 MH/s (6) 3: 32.495 MH/s (11) 4: 27.277 MH/s (5) 5: 32.453 MH/s (14) 6: 32.459 MH/s (11) 7: 32.495 MH/s (15)
Eth: New job #a630f840 from ssl://eu1-etc.ethermine.org:5555; diff: 4000MH
Eth speed: 222.139 MH/s, shares: 78/0/0, time: 0:24
GPUs: 1: 32.456 MH/s (16) 2: 32.498 MH/s (6) 3: 32.495 MH/s (11) 4: 27.278 MH/s (5) 5: 32.455 MH/s (14) 6: 32.458 MH/s (11) 7: 32.498 MH/s (15)
 

[FloppyPurpleGherkin]

Anybody using 1070? Two years ago all of the 1070s were pushing a constant 30-32 mh/s. Now, only one (EVGA) of them is pushing 29 mh/s, the rest (AERO MSI) are in the low 22-23 mh/s. I understand the 1070s are affected by the increased DAG size as well as nvidia's drivers. However, how come one of my card still pushes similar numbers to two years ago, is the EVGA using a more efficient memory or what causes this? I've tweaked mem/clock and TDP but nothing. Thanks.

OS: Win 10
Newest Nividia drivers
Latest/Beta PM.
Straps/vrtimings, etc. all applied

I'm running some, The Samsung memory variants are still hitting 30-31mh with a +800 OC, The Micron memory variants hitting 26-27mh with a +200-250 OC..

Not sure why yours are 22-23.. What are the temps? are they throttling?

[skinnyfalcon]

After latest updates and new PM, erratic crash continues and after a day the miner will not even start. The windows pops up then disappears. Any ideas on what to check for?

PM 5.2c
Windows 10 with latest update
AMD 20.11.1

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100



-clKernel 2
-proto 1
-coin eth
-stales 1
-rate 0
-cdm 0
-acm
-mi 11
-minRigSpeed 250
-eres 10
-lidag 3
-altinit
-wdog 1
-rmode 1
-log 0
-leaveoc
-tt 55
-fanmin 35
-fanmax 85
-tmax 75
-cclock 1150
-mclock 2110
-cvddc 950
-mvddc 950

[WhyMe]

Nice to see a new version !
Anyone running straps on VEGA ?
I see NO difference with any straps 0 to 5 !?
Samsung memory, drivers 20.4.2