PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[AzzAz]

There"s still 50% incorrect shares. My rig is 4 x 580 8 GB, Windows 7, blockchain drivers, 4 GB ram. Before one month everything was perfect with version 5.0b. What is the problem now? Now I'm using lol miner, only it works.

It's that your configuration is bad

Thank you for this really efficient reply which really help. It worked like charm for 3 years, 24/7, and phoenix miner stopped before one month.

post config man :/ -

OK. 4 x RX 580 8 GB Sapphire Nitro, Windows 7 64 bit, 4 GB ram, hdd 320 GB, virtual memory 40 GB, blockchain driver (Robin Hood). I have several same rigs as above, only MB and cpu are different, but everywhere is the same problem, around 50% of incorrect shares. It works like charm for several years, but problem starts before one month. Only lol miner 1.16 work well, Claymore don't, Phoenix don't (all versions, but I used Phoenix 5.0 and everything was good until November). I guess Windows 7 is problem now, but I don't want to change to Windows 10 until I am forced to do that, because lol miner works, even with 2 MH less per card.
I'm asking developer to tell us if he/they will solve this problem, or?
Thank you.

it is old OS, old driver, if old miner stop - there is no help, cause new miner works on new OS, new driver...
also DAG grows hence need for new miner etc...

[coverca]

 Supports AMD RX5600 xt?

[br2459]

Supports AMD RX5600 xt?

Yep it does. I have a rig of 5 of them and it runs fine.

[Cebo01]

I am running a rig right now with 2 cards in it. AN XFX RX 570 8G and an XFX RX 570 4G

The 8G card is running around 22 MH/s
The 4G card is running either 0 MH/s or 0.651 MH/s on Pheonix 5.3b and 5.4c

My bat file is the one that came with the download, I just changed the wallet address for the start miner file

What can I do to get the second card (4G one) to get a decent hashrate on the miner?

[coverca]

Supports AMD RX5600 xt?

Yep it does. I have a rig of 5 of them and it runs fine.

I use 5.4c and amd 20.4.2 on win 10. with a single rx 5600 xt board everything goes ok. when I put more boards rx 5600 xt windows falls. any idea? thanks

[socks435]

Do you have any idea how to add this string (-straps) on hiveOS with phoenixminer?

I can't find any guides out there about adding this string on hiveos.

[anakbaru]

i use rtx 3080, and nvidia driver 460.79, PM 5.4c   and keep crashing, any bat script example?

[golldiger]

"-fanmin" not working for my MSI rx580 GamerX. So I use Overdriventool to disable ZeroFan feature, Is there any solution to use only Phoenix commands?  drivers latest

[golldiger]

"-fanmin" not working for my MSI rx580 GamerX. So I use Overdriventool to disable ZeroFan feature, Is there any solution to use only Phoenix commands?  drivers latest

 -fcm <n> Set fan control mode (0 - auto, 1 - use VBIOS fan control, 2 - forced fan control; default: 0)

Thx. Works ok now)

[dragonmike]

3060 Ti here - works well, unless...

- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase)
- Epoch changes (same result as above)

Please fix.

[carloshd]

I got to ask. Is it true that all cryptos are contributing to mass global warming in the world? just wondering.. 

this is ridiculous, the heating caused by mining is irrelevant, the global warming is caused by the pollution generated by the big industries, we are simply irrelevant, don't fall for that lie!

[j2james]

Dear @PhoenixMiner,

Is it possible to detect which card initiates error (for example error 999) and somehow log this info?

It will help to setup overclocking parameters of cards if I will know which one has initiated a problem.

Now log when error is thrown looks like the following

Code:

2020.12.19:19:38:29.526: GPU6 CUDA error in CudaProgram.cu:456 : unknown error (999)
2020.12.19:19:38:29.526: gps6 CUDA error in CudaProgram.cu:258 : unknown error (999)
2020.12.19:19:38:29.526: gps4 CUDA error in CudaProgram.cu:258 : unknown error (999)
2020.12.19:19:38:29.526: GPU4 CUDA error in CudaProgram.cu:309 : unknown error (999)
2020.12.19:19:38:29.526: gps1 CUDA error in CudaProgram.cu:258 : unknown error (999)
2020.12.19:19:38:29.526: gps2 CUDA error in CudaProgram.cu:258 : unknown error (999)
2020.12.19:19:38:29.526: GPU1 CUDA error in CudaProgram.cu:456 : unknown error (999)
2020.12.19:19:38:29.526: gps3 CUDA error in CudaProgram.cu:258 : unknown error (999)
2020.12.19:19:38:29.526: gps5 CUDA error in CudaProgram.cu:258 : unknown error (999)
2020.12.19:19:38:29.526: GPU2 CUDA error in CudaProgram.cu:456 : unknown error (999)
2020.12.19:19:38:29.526: GPU3 CUDA error in CudaProgram.cu:456 : unknown error (999)
2020.12.19:19:38:29.526: GPU5 CUDA error in CudaProgram.cu:456 : unknown error (999)
2020.12.19:19:38:29.558: GPU5 GPU5 search error: unknown error
2020.12.19:19:38:29.558: GPU2 GPU2 search error: unknown error
2020.12.19:19:38:29.558: GPU3 GPU3 search error: unknown error
2020.12.19:19:38:29.558: GPU1 GPU1 search error: unknown error
2020.12.19:19:38:29.558: GPU4 GPU4 search error: unknown error
2020.12.19:19:38:29.558: GPU6 GPU6 search error: unknown error
2020.12.19:19:38:29.573: wdog Fatal error detected. Restarting.

It tells nothing about which card was the first.

Please, add this info in log if it is possible.

Thanks

[bitquad]

These are the settings I used with Claymore. Will these work with Phoenix Miner? I am currently mining with Phoenix but getting slightly lower results.

Rig has 13 GPUs with six RX580 and seven 1070 TI cards. All 13 are mining at 31.0 - 31.2 mh/s. I used to get 33 mh/s with the 1070 ti cards in Claymore. So I would like to tweak it but am not familiar with the Phoenix Miner command options.

Here's a typical Claymore batch file for one of my rigs. There's 13 GPUs per rig: 7x1070ti and 6xRX580. All cards have 8GB RAM:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:\Users\me\Desktop\CLAYMORE15\EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal mywallet.myrig -dbg -1 -epsw x -mode 1 -ftime 10 -eres 2 -di 0123456789abc -rxboost 1,1,1,1,1,1 -strap 1,1,1,1,1,1,1,1,1,1,1,1,1 -cclock 1130,1130,1130,1130,1130,1130,+100,+100,+100,+100,+100,+100,+100 -mclock 2100,2200,2200,2200,2200,2200,+600,+600,+600,+600,+600,+600,+600 -cvddc 850,850,850,850,850,850 -mvddc 850,850,850,850,850,850 -fanmin 60,60,60,60,60,60,60,60,60,60,60,60,60 -fanmax 60,60,60,60,60,60,60,60,60,60,60,60,60

Can Phoenix use similar commands?

[batsonxl]

I got to ask. Is it true that all cryptos are contributing to mass global warming in the world? just wondering.. 

1 car can deliver to atmosphere more than 500gpu heat can.and also car has co2 exhaust too which adds more heat

[Cryptomining2003]

I can confirm higher power usage, but it´s not since 5.4c, it started with 5.3.

pls do some optimization...for 5700 cards, there´s no need to change anything for getting same hashrate with higher power consumption

[DroneFlyer]

Does PhoenixMiner support dual mining Ethereum  together with Handshake
(HNS)?

[bobben2]

Can confirm that an RTX 3060 TI  (MSI Ventus 2) reaches almost 60MH/s mining ETH with this miner, with latest driver (457.51) and Windows 10.
In MSI Afterburner I dial in  powerlimit of 62%,  which leaves GPU core running at around 825 MHz. and I have mem overclocked to 7800.
Temp reported in MSI AB is 53 deg, fan auto at 53%.   Power consumption reported by miner is 123Watts.

[BeefyBitcoinBoy]

Phoenix,

Just an update on this issue:  v5.3b seems to be moving in the right direction - all of my GPUs mine, now, but they each see about 18MH less hashrate on v5.3b versus what I still get on v5.0e.  Again, with this version, downgrading to v5.0e resolves the issue without rebooting.  If it's helpful, the starting hashrate for v5.3b during autotuning is only about half of what it is in v5.0e.  I hope this helps.

I wanted to report an issue I ran into on v5.2e for mixed-gen ETH mining on one XFX RX 5700 8GB + one XFX RX 480 8GB + one MSI RX 480 8GB on Ubuntu 18.04.4 LTS (via minerstatOS) with amdgpu-pro v19.30 drivers.  When I upgraded to v5.2e, I saw my RX 5700 take approximately an hour to build its DAG file, and then yield 0 hashrate, and the two RX 480s only produced about a third of their normal hashrate.  I previously saw the same behavior with all PhoenixMiner v5.1x versions, as well.

Rolling back to v5.0e immediately resolves the issue without a reboot.  I have used a few versions of the PhoenixMiner for about ten months on this mixed-gen rig without issue, so this has been something introduced after v5.0e.  In case it's any help, I am including a few log excerpts, though I never saw any suspicious messages or error logs to report.

v5.2e log (note the miner uptime versus the DAG generation progress)

Code:

2020.11.23:16:24:05.279: eths Eth: New job #f7c9706f from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:24:05.536: GPU1 GPU1: DAG  92%
2020.11.23:16:24:05.866: main
2020.11.23:16:24:05.866: main *** 0:43 *** 11/23 16:24 **************************************
2020.11.23:16:24:05.866: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:43
2020.11.23:16:24:05.866: main Eth speed: 22.623 MH/s, shares: 17/0/0, time: 0:43
2020.11.23:16:24:05.866: main GPUs: 1: 0.000 MH/s (0) 2: 11.801 MH/s (11) 3: 10.822 MH/s (6)
2020.11.23:16:24:05.866: main Eth: Accepted shares 17 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:24:05.866: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:24:05.866: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:24:05.866: main Eth: Average speed (5 min): 22.595 MH/s
2020.11.23:16:24:05.866: main Eth: Effective speed: 25.98 MH/s; at pool: 25.98 MH/s
2020.11.23:16:24:05.866: main

...

2020.11.23:16:27:02.493: eths Eth: New job #c61bb84f from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:27:02.888: GPU1 GPU1: DAG  98%
2020.11.23:16:27:04.976: main GPU1: 45C 91% 53W, GPU2: 60C 100% 76W, GPU3: 50C 100% 70W
GPUs power: 199.2 W
2020.11.23:16:27:06.380: main
2020.11.23:16:27:06.380: main *** 0:46 *** 11/23 16:27 **************************************
2020.11.23:16:27:06.381: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:46
2020.11.23:16:27:06.381: main Eth speed: 22.623 MH/s, shares: 18/0/0, time: 0:46
2020.11.23:16:27:06.381: main GPUs: 1: 0.000 MH/s (0) 2: 11.802 MH/s (11) 3: 10.821 MH/s (7)
2020.11.23:16:27:06.381: main Eth: Accepted shares 18 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:27:06.381: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:27:06.381: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:27:06.381: main Eth: Average speed (5 min): 22.618 MH/s
2020.11.23:16:27:06.381: main Eth: Effective speed: 25.73 MH/s; at pool: 25.73 MH/s
2020.11.23:16:27:06.381: main

...

2020.11.23:16:27:48.656: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2020.11.23:16:27:51.512: main
2020.11.23:16:27:51.512: main *** 0:47 *** 11/23 16:27 **************************************
2020.11.23:16:27:51.513: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:47
2020.11.23:16:27:51.513: main Eth speed: 22.624 MH/s, shares: 19/0/0, time: 0:47
2020.11.23:16:27:51.513: main GPUs: 1: 0.000 MH/s (0) 2: 11.801 MH/s (12) 3: 10.823 MH/s (7)
2020.11.23:16:27:51.513: main Eth: Accepted shares 19 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:27:51.513: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:27:51.513: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:27:51.513: main Eth: Average speed (5 min): 22.608 MH/s
2020.11.23:16:27:51.513: main Eth: Effective speed: 26.73 MH/s; at pool: 26.73 MH/s
2020.11.23:16:27:51.513: main
2020.11.23:16:27:52.592: eths Eth: New job #aaa008e3 from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:27:53.583: GPU1 GPU1: DAG 100%
2020.11.23:16:27:53.672: GPU1 GPU1: DAG generated in 2841.7 s (1.4 MB/s)
2020.11.23:16:27:53.673: GPU1 GPU1: Using Ethash OCL kernels (gfx1010; -clkernel 1)
2020.11.23:16:27:53.673: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.11.23:16:27:53.673: GPU1 GPU1: starting auto-tune process

v5.0e log (note the functional GPU1 and the much better hashrates for SPU2 and GPU3)

Code:

Eth: New job #169100e2 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 117.353 MH/s, shares: 5/0/0, time: 0:04
GPUs: 1: 57.140 MH/s (2) 2: 30.881 MH/s (2) 3: 29.332 MH/s (1)
GPU1: 57C 89% 130W, GPU2: 71C 100% 87W, GPU3: 61C 100% 86W
GPUs power: 303.0 W

Still seeing these issues on v5.4b and v5.4c.  On mixed rigs, I see Navi cards running at 2/3 hashrate and RX 480 8GB cards running at 1/3 hashrate.  Rolling back to v5.0e fixes the issue without rebooting.

I'll hang around for a week or so until DAG epoch 384, when v5.0e dies off.  Then, one way or another, I'll stop posting about this.

[Metroid]

Can confirm that an RTX 3060 TI  (MSI Ventus 2) reaches almost 60MH/s mining ETH with this miner, with latest driver and Windows 10.
In MSI Afterburner I dial in  powerlimit of 62%,  which leaves GPU core running at around 825 MHz. and I have mem overclocked to 7800.
Temp reported in MSI AB is 53 deg, fan auto at 53%.   Power consumption reported by miner is 123Watts.

When you trolls say the temperature, is always important to say the ambient temperature, when I say ambient temperature, is the temperature outside your house.

[bobben2]

Can confirm that an RTX 3060 TI  (MSI Ventus 2) reaches almost 60MH/s mining ETH with this miner, with latest driver and Windows 10.
In MSI Afterburner I dial in  powerlimit of 62%,  which leaves GPU core running at around 825 MHz. and I have mem overclocked to 7800.
Temp reported in MSI AB is 53 deg, fan auto at 53%.   Power consumption reported by miner is 123Watts.

When you trolls say the temperature, is always important to say the ambient temperature, when I say ambient temperature, is the temperature outside your house.

Things are relative here.  My RX 5700 do 10% lower hash but with same power.  I like to keep my cards at below 60 deg reported.
Room temp is 23-24 a bit warm