Deafran
Jr. Member
Offline
Activity: 49
Merit: 4
|
|
December 21, 2020, 10:01:26 AM |
|
What happen to gtx 1070 why I cant get around 31mh/s now the hr is around 23mh/s even increase mmclock and core ican only get around 24. What happen.?
Im currently set it to -straps 4 as what other suggest but no luck...
thats to low, using PM 5.4c i got 26,8 minimum, with : PL 80 CC +100 MC +400 (after burner) using "Ehereum-nanopool.bat" - only change the wallet and worker name maybe ur cards over heat ...
|
|
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
theerachate.p
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 21, 2020, 11:14:20 AM |
|
3060 Ti here - works well, unless...
- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase) - Epoch changes (same result as above)
Please fix.
happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol
|
|
|
|
lgregori
Newbie
Offline
Activity: 25
Merit: 3
|
|
December 21, 2020, 11:40:13 AM |
|
What is your hashrate for 3060 TI? I have a Zotac with difficulty gives 57 Mh. Card marriage or normal?
|
|
|
|
Lindstroem
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 21, 2020, 11:51:55 AM |
|
Hello, I have 8 5700XT My Red Devil & Sapphire 5700XT does not respond to fan commands in phoenixminer nor afterburner with the latest AMD drivers. is there a solution or workaround for this? Can’t use Radeon software as it resets fancurve if the computer crashes and I’ve tried going back to January drivers (20.5.1) where Phoenix fan commands work but NiceHash crashes the computer upon startup and there are other problems with using Phoenix directly.
I’ve read about the core temp limiter to downclock to avoid overheating but the problem is memory temps that reach beyond 96C due to the low fan curves without option to adjust them.
Is there a solution or fix in coming versions for this?
|
|
|
|
ahsbqt
Newbie
Offline
Activity: 24
Merit: 1
|
|
December 21, 2020, 12:33:27 PM |
|
Hello, I have 8 5700XT My Red Devil & Sapphire 5700XT does not respond to fan commands in phoenixminer nor afterburner with the latest AMD drivers. is there a solution or workaround for this? Can’t use Radeon software as it resets fancurve if the computer crashes and I’ve tried going back to January drivers (20.5.1) where Phoenix fan commands work but NiceHash crashes the computer upon startup and there are other problems with using Phoenix directly.
I’ve read about the core temp limiter to downclock to avoid overheating but the problem is memory temps that reach beyond 96C due to the low fan curves without option to adjust them.
Is there a solution or fix in coming versions for this?
Afterburner 4.6.2 works just fine with saphhire 5700xt pulse and driver 20.8.1
|
|
|
|
duketasos
Newbie
Offline
Activity: 28
Merit: 0
|
|
December 21, 2020, 12:51:18 PM |
|
got a strange prob on my personal computer and one of my rigs. after a day or two teamviewer goes offline (but miner still works for half a day) and in the end this error message appear An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. Windows 10 latest build drivers: 18.12 and 18.6 . systems have sufficient vram . any suggestions?
|
|
|
|
bccromer
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 21, 2020, 01:47:40 PM Last edit: December 21, 2020, 02:02:50 PM by bccromer |
|
I have a 9 x 5500xt rig. 4 of the cards generate the DAG just fine. The other 5 generate like 1% per minute, meaning it takes a REALLY long time for it to complete. This doesn't happen when I use other miners. Any ideas what might be going on? I prefer Phoenix, but obviously can't use it if that is happening.
Just to give more information, this is running in SMOS. I have tried multiple versions of phoenix back to 5.2e, and I get the same issue.
|
|
|
|
waywoos
Jr. Member
Offline
Activity: 124
Merit: 2
|
|
December 21, 2020, 02:20:17 PM |
|
Hello, I have 8 5700XT My Red Devil & Sapphire 5700XT does not respond to fan commands in phoenixminer nor afterburner with the latest AMD drivers. is there a solution or workaround for this? Can’t use Radeon software as it resets fancurve if the computer crashes and I’ve tried going back to January drivers (20.5.1) where Phoenix fan commands work but NiceHash crashes the computer upon startup and there are other problems with using Phoenix directly.
I’ve read about the core temp limiter to downclock to avoid overheating but the problem is memory temps that reach beyond 96C due to the low fan curves without option to adjust them.
Is there a solution or fix in coming versions for this?
I had this issue. I think it was 20.1.3 that worked I used afterburner after that. None other drivers worked
|
|
|
|
doctorman
Newbie
Offline
Activity: 35
Merit: 0
|
|
December 21, 2020, 03:01:22 PM |
|
3060 Ti here - works well, unless...
- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase) - Epoch changes (same result as above)
Please fix.
happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists? so it is not a driver issue, it is a general rtx 3000 series issue If I start on +1200 mem clock I can survive but I still get bunch of invalid shares , if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock I have an MSI and a Zotac 3060 ti , Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both I get 59-60 MH on the 900+ mem and can get close to 64 MH if I go up to +1500 and give it some power like 66% to 68%
|
|
|
|
theerachate.p
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 21, 2020, 03:06:59 PM |
|
3060 Ti here - works well, unless...
- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase) - Epoch changes (same result as above)
Please fix.
happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists? so it is not a driver issue, it is a general rtx 3000 series issue If I start on +1200 mem clock I can survive but I still get bunch of invalid shares , if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock I have an MSI and a Zotac 3060 ti , Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both I get 59-60 MH on the 900+ mem and can get close to 64 MH if I go up to +1500 and give it some power like 66% to 68% Here's what I did, reset every oc settings to stock start the miner wait it to load the dag file and everything let it run for 2-3 minutes crank the memory oc +1500 in one go never got invalid shares until it loads the new dag then the issue comes back hope this help
|
|
|
|
UserU
|
|
December 21, 2020, 03:09:58 PM |
|
Why are newbies even allowed to post links at this point There's been a wave of spambots posting the same malware. Just avoid them for now.
|
. .500 CASINO.██ | ▄▀ | ▄
▄ | | . THE HOTTEST CRYPTO CASINO & SPORTSBOOK | | ▄▄▄████████████ ▄▄▄███████████████████ ▐█████████████████████ █████████████████████ ▐███████████████████ ▐███████████████████ ███████████████████ ██████▀█████▀██████ ▐████████▀█████████ ▐███████████████████ ███████████████████ ▐███████████████████ ▀██████▀▀▀▀▀▀ ▀▀▀█ | ▄▄▄▀▀▀▀▀▀▀▄▄▄ ▄▄▀▀▄ ▄ ▀ ▀ ▀ ▄ ▄▀▀▄▄ ▄▀▄ ▀ ▀ ▄▀▄ █ ▄ ▄ █ █ ▄ █████ ▄███▄ ▄███▄ ▄ █ █ ▄ ██▄▄ ██ ██ ██ ██ ▄ █ █ ▄ ▀▀▀██ ██ ██ ██ ██ ▄ █ █ ▄ ▄▄ ██ ██ ██ ██ ██ ▄ █ █ ▄ ▀███▀ ▀███▀ ▀███▀ ▄ █ █ ▄ ▄ █ ▀▄ ▀ ▄ ▄ ▀ ▄▀ ▀▀▄▄ ▀ ▄ ▄ ▄ ▄ ▀ ▄▄▀▀ ▀▀▀▄▄▄▄▄▄▄▀▀▀ | █▄▄▄██████████▄▄▄ ███████████▀██▀▀██▄▄ ███████████████████▄ █████████████████████ ████▄████▄███████▄███ █████████████████████ ████▀████▀███████▀███ █████████████████████ ███████████████████▀ ███████████▄██▄▄██▀▀ ▀▀▀██████████▀▀▀ | | ► ORIGINALS
► SLOTS | | ► LIVE GAMES
► SPORTSBOOK | ▄
▄
| ▀▄ | . ██..PLAY NOW.. |
|
|
|
Biterion
Newbie
Offline
Activity: 38
Merit: 0
|
|
December 21, 2020, 03:51:06 PM |
|
Hi, I have rigs with 6 x p106-100 mining edition and they work just fine with 5.3b (on 382.43 driver version). But when I update miner to 5.4c it simply doesn't start, miner closes in a second.
I tried updating drivers to 460.89 and 5.4c starts but shows me errors:
NVAPI error in NvapiWrapper.c:316 : -6 Unable to load NvAPI: error 3 GPU1: unable to init NvAPI with bus ID 65536 GPU2: unable to init NvAPI with bus ID 131072 GPU3: unable to init NvAPI with bus ID 196608 GPU4: unable to init NvAPI with bus ID 262144 GPU5: unable to init NvAPI with bus ID 327680 GPU6: unable to init NvAPI with bus ID 393216
What's wrong? Should I either continue to stay on 5.3b and don't update or there's a better driver to work with p106-100?
i have EVGA P106-100 now run with 441.66 stock bios PM 5.3b, 5.4b and 5.4c get the same 21,2 Mhs on Ethas i dont adjust anything, lets you try maybe you can get luck with your experience
|
|
|
|
Digital_Seytan
Jr. Member
Offline
Activity: 222
Merit: 2
digiseytan@walletofsatoshi.com
|
|
December 21, 2020, 04:02:06 PM |
|
What happen to gtx 1070 now with ETC mining I get around 32.280mh/s now 90watt,with the Eth mining it is around 24 mh/s and use 122Watt even increase mmclock and core ican only get around 24. What happen.i use win64 lite with latest nvidia driver recent and latest version of Poenixminer,what is the problem please pm developer help with a good update and straps option dont work with nvidia P106-100 mining cards trex miner work with this cards
|
DonateSATS:Digiseytan@WALLETOFSATOSHi.COM SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx ETC+Zil Pool:https://k1pool.com/invite/895eb07555
|
|
|
tg88
Legendary
Offline
Activity: 2380
Merit: 1405
|
|
December 21, 2020, 04:53:57 PM |
|
What is your hashrate for 3060 TI? I have a Zotac with difficulty gives 57 Mh. Card marriage or normal?
to make it a little easier, What frequencies are you using? It normally reaches 60 mhs: powerlimit: 56 core: -502 memory: +1000 I achieved these results with a Galax 3060 TI EX (36ISL6MD1WGG)
|
.
| ▄██████████████ ███████████████ ███████████████ █████████████▀░ ███████████▀▄░█ ██████████░███░ ███████▀▀░▀▀█▀▀ █████▀░░░░░░░▀▄ █████░░░░░░░░░█ █████▄░░░░░░░▄▀ ███████▄▄▄▄▄███ ███████████████ ▀██████████████ | ▄██████████████ ███████████████ ████████████▀██ █████████▀▀░░░▀ ████████░░░░░░░ ██████░░░░░░░░░ █████░░░░░░░░░░ █████░░░░░░░░░░ ██████▄░░░░▄▄▄░ █████████▀▀░░░▀ ████████▄▄▄▄▄▄▄ ███████████████ ▀██████████████ | ▄██████████████ ███████████████ ██████████▀▀▀▀▀ ███████▀░▀█▄░░░ ██████░░░░░█▄░▄ █████░░▄▄▄▄▄██▀ █████▀▀▀░░░░▄█▄ █████░░░▄▄█▀▀░█ ██████▄█▀▀░░░░▀ ███████▄▄░░░░░░ ██████████▄▄▄▄▄ ███████████████ ▀██████████████ | ▄████████████████████████▄ ██████████████████████████ █████████████░████████████ ████████████▀▄████████████ █████▀▀░░░░░░░░░░░░▀▀█████ ████▀░░░░░░░░░░░░░░░░▀████ ████░░░██░██░░░░█░░░░░████ ████░░░▄▄▀▄▄░░▀▀▄▀▀░░░████ ████▄░░▀▀░▀▀░░░░▀░░░░▄████ █████▄▄░░░░░░░░░░░░▄▄█████ ██████████████████████████ ██████████████████████████ ▀████████████████████████▀ | .
|
|
|
|
socks435
Legendary
Offline
Activity: 2016
Merit: 1030
Privacy is always important
|
|
December 21, 2020, 05:50:47 PM |
|
What happen to gtx 1070 why I cant get around 31mh/s now the hr is around 23mh/s even increase mmclock and core ican only get around 24. What happen.?
Im currently set it to -straps 4 as what other suggest but no luck...
thats to low, using PM 5.4c i got 26,8 minimum, with : PL 80 CC +100 MC +400 (after burner) using "Ehereum-nanopool.bat" - only change the wallet and worker name maybe ur cards over heat ... No all card temp is around 61c. I search every and there are many miners experience the same issue but some people are not affected? There might be something about straps changes?
|
Solving blocks can't be solved without my rigs.
|
|
|
Littlegrand
Jr. Member
Offline
Activity: 104
Merit: 5
|
|
December 21, 2020, 08:25:24 PM |
|
Does anyone know how to relate the Pheonixminer GPU number to the physical card under Ubuntu?
Thanks
|
|
|
|
dfabricni
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 21, 2020, 08:26:30 PM |
|
Hi All,
I'm using latest build of HiveOS (kernel version 5.0.21-201105-hiveos; os version 0.6-184@201221; drivers OpenCL 20.30) and PhoenixMiner 5.4c. My rig has a mix of 5xRX5700 XT 8GB cards, 1xRX590 8 GB and 1xRX580 8 GB. I'm receiving "Disabling DAG pre-allocation (not enough VRAM)" for RX580 and RX590 cards.
2020.12.21:20:54:27.883: GPU4 GPU4: Free VRAM: 7.922 GB; used: 0.062 GB 2020.12.21:20:54:27.884: GPU4 GPU4: Allocating DAG (4.15) GB; good for epoch up to #403 2020.12.21:20:54:27.885: GPU4 GPU4: Generating DAG for epoch #383 2020.12.21:20:54:28.255: GPU5 GPU5: Free VRAM: 7.922 GB; used: 0.062 GB 2020.12.21:20:54:28.255: GPU5 GPU5: Allocating DAG (4.15) GB; good for epoch up to #403 2020.12.21:20:54:28.256: GPU5 GPU5: Generating DAG for epoch #383 2020.12.21:20:54:28.269: GPU1 GPU1: DAG 13% 2020.12.21:20:54:28.679: GPU6 GPU6: Free VRAM: 7.968 GB; used: 0.019 GB 2020.12.21:20:54:28.680: GPU6 GPU6: Disabling DAG pre-allocation (not enough VRAM) 2020.12.21:20:54:28.680: GPU6 GPU6: Allocating DAG for epoch #383 (3.99) GB 2020.12.21:20:54:28.689: GPU6 GPU6: Generating DAG for epoch #383 2020.12.21:20:54:28.770: GPU2 GPU2: DAG 13% 2020.12.21:20:54:28.807: GPU7 GPU7: Free VRAM: 7.968 GB; used: 0.019 GB 2020.12.21:20:54:28.807: GPU7 GPU7: Disabling DAG pre-allocation (not enough VRAM) 2020.12.21:20:54:28.807: GPU7 GPU7: Allocating DAG for epoch #383 (3.99) GB 2020.12.21:20:54:28.814: GPU7 GPU7: Generating DAG for epoch #383 2020.12.21:20:54:29.258: GPU3 GPU3: DAG 15%
I'm concerned that when the ETH DAG hits 4 GB I will be unable to mine with these two cards. Is this error message expected and I should not worry or there is really something wrong and I should somehow fix it?
Thanks, Dinko
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
December 21, 2020, 09:02:55 PM |
|
What happen to gtx 1070 now with ETC mining I get around 32.280mh/s now 90watt,with the Eth mining it is around 24 mh/s and use 122Watt even increase mmclock and core ican only get around 24. What happen.i use win64 lite with latest nvidia driver recent and latest version of Poenixminer,what is the problem please pm developer help with a good update and straps option dont work with nvidia P106-100 mining cards trex miner work with this cards
The greater the dag, the more ips it will use it, actually a gtx 1070 can do 35mhs on etc right now if you know how to.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
doctorman
Newbie
Offline
Activity: 35
Merit: 0
|
|
December 21, 2020, 10:27:37 PM |
|
3060 Ti here - works well, unless...
- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase) - Epoch changes (same result as above)
Please fix.
happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists? so it is not a driver issue, it is a general rtx 3000 series issue If I start on +1200 mem clock I can survive but I still get bunch of invalid shares , if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock I have an MSI and a Zotac 3060 ti , Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both I get 59-60 MH on the 900+ mem and can get close to 64 MH if I go up to +1500 and give it some power like 66% to 68% Here's what I did, reset every oc settings to stock start the miner wait it to load the dag file and everything let it run for 2-3 minutes crank the memory oc +1500 in one go never got invalid shares until it loads the new dag then the issue comes back hope this help that is not a solution.. that is exactly what we are all saying. you never know the epoch change time and don't want to be by the miner to check it for that. Perhaps a new parameter to temporarily change the mem clock before the epoch change in phonexminer would fix this.
|
|
|
|
Geniusvzla
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 21, 2020, 10:31:37 PM |
|
got a strange prob on my personal computer and one of my rigs. after a day or two teamviewer goes offline (but miner still works for half a day) and in the end this error message appear An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. Windows 10 latest build drivers: 18.12 and 18.6 . systems have sufficient vram . any suggestions?
Hello, enter the Device Manager: Network Adapters and if you have this (WAN Miniport) then disable them all and restart your computer. Then verify that they are really disabled. You must also verify with HWiNFO64 that you do not have memory errors in the GPUS, if you have them, just lower the memory clock until you eliminate them. I had that glitch and managed to fix it with these 2 options. Excuse my bad english
|
|
|
|
|