Overdrive5
Member

Offline
Activity: 113
Merit: 10
|
 |
July 05, 2018, 04:40:01 PM |
|
... GPU 1: Gigabyte GeForce GTX 650 2GB (2048 MB) = used for my own necessitate, browsing, working, sometime gaming ... With this setting i was play game on 650 & mine on 1060 ETH, Neoscript, old Equihash with out problem only now i can't use your miner because it say from start "ERROR: out of memory" with is something wrong
Bolded is your problem, 3GB cards are new required minimum. Your only option is to start miner only on GPU0 (3GB one), look few post above how to do that (in your case use parameter --cuda_devices 0 for GPU0). And to add more info to this, EWBF requires compute 5 or higher. Unfortunately, a GTX 650 is only compute 3.0 . Maybe use the 650 to mine something else?
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
|
|
Overdrive5
Member

Offline
Activity: 113
Merit: 10
|
 |
July 05, 2018, 04:43:58 PM |
|
Hello @EWBF_
hardware:
motherboard: asrock h110 pro btc (13gpu) memory : 4gb cpu Celeron 3930
video cards: 13 gtx EVGA SC2 1080Ti
issue:
gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. May be build the miner to detect all gpus at the very start?
I started 2 miner
cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12
and is very very very slow process detected card :-( and crashed EWBF
Please help me ASAP i have +- 3000 card
13x1070 card working normal
SouthWEBA, Which O/S?
|
|
|
|
sir_blacks
Jr. Member
Offline
Activity: 119
Merit: 1
|
 |
July 05, 2018, 04:54:33 PM |
|
... GPU 1: Gigabyte GeForce GTX 650 2GB (2048 MB) = used for my own necessitate, browsing, working, sometime gaming ... With this setting i was play game on 650 & mine on 1060 ETH, Neoscript, old Equihash with out problem only now i can't use your miner because it say from start "ERROR: out of memory" with is something wrong
Bolded is your problem, 3GB cards are new required minimum. Your only option is to start miner only on GPU0 (3GB one), look few post above how to do that (in your case use parameter --cuda_devices 0 for GPU0). gsanjin if you was read i say GP0 is use only for mining aka always in any mining application i enable only GP0 aka in EWBF case i have "--cuda_devices 0" used, so what you was say is not issue, thx anyway @Overdrive5 you to was not read all what i write 650 GPU = "used for my own necessitate, browsing, working, sometime gaming" is NOT use for mining ... only 1060 read full post what done on previos page aka here https://bitcointalk.org/index.php?topic=4466962.msg41579162#msg41579162
|
|
|
|
SouthWEBA
Copper Member
Newbie
Offline
Activity: 5
Merit: 0
|
 |
July 05, 2018, 05:13:14 PM |
|
UNIX - Fedora Version 0.3.4b working super to ZEC Hello @EWBF_
hardware:
motherboard: asrock h110 pro btc (13gpu) memory : 4gb cpu Celeron 3930
video cards: 13 gtx EVGA SC2 1080Ti
issue:
gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. May be build the miner to detect all gpus at the very start?
I started 2 miner
cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12
and is very very very slow process detected card :-( and crashed EWBF
Please help me ASAP i have +- 3000 card
13x1070 card working normal
SouthWEBA, Which O/S?
|
|
|
|
Overdrive5
Member

Offline
Activity: 113
Merit: 10
|
 |
July 05, 2018, 05:31:53 PM |
|
UNIX - Fedora Version 0.3.4b working super to ZEC Hello @EWBF_
hardware:
motherboard: asrock h110 pro btc (13gpu) memory : 4gb cpu Celeron 3930
video cards: 13 gtx EVGA SC2 1080Ti
issue:
gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. May be build the miner to detect all gpus at the very start?
I started 2 miner
cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12
and is very very very slow process detected card :-( and crashed EWBF
Please help me ASAP i have +- 3000 card
13x1070 card working normal
SouthWEBA, Which O/S? How much swap are you running?
|
|
|
|
baraday
Newbie
Offline
Activity: 20
Merit: 0
|
 |
July 05, 2018, 05:58:16 PM |
|
Am i the only one so far that dont have any kind of improvment with 0.3 version speed wise,on 144.5 algo my 1080tis are doing 55-60 sols wich is the same speed that they had on previous version...Am i missing out something or boost is for 1060/70 cards?
I also have 0 improvement on my 1080ti, so perhaps with the next version 
|
|
|
|
Coin++
|
 |
July 05, 2018, 06:41:00 PM |
|
Am i the only one so far that dont have any kind of improvment with 0.3 version speed wise,on 144.5 algo my 1080tis are doing 55-60 sols wich is the same speed that they had on previous version...Am i missing out something or boost is for 1060/70 cards?
For me : 1050Ti, and 15% boost with v0.3 :-)
|
|
|
|
EWBF_
|
 |
July 05, 2018, 07:24:55 PM |
|
Hello @EWBF_
hardware:
motherboard: asrock h110 pro btc (13gpu) memory : 4gb cpu Celeron 3930 UNIX - Fedora
Version 0.3.4b working super to ZEC
video cards: 13 gtx EVGA SC2 1080Ti
issue:
gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. May be build the miner to detect all gpus at the very start?
I tested to start 2 miner
cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12
and is very very very slow process detected card :-( and crashed EWBF
Please help me ASAP i have +- 3000 card
13x1070 card working normal
Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!
|
|
|
|
gsanjin
Member

Offline
Activity: 191
Merit: 12
|
 |
July 05, 2018, 07:26:34 PM |
|
... GPU 1: Gigabyte GeForce GTX 650 2GB (2048 MB) = used for my own necessitate, browsing, working, sometime gaming ... With this setting i was play game on 650 & mine on 1060 ETH, Neoscript, old Equihash with out problem only now i can't use your miner because it say from start "ERROR: out of memory" with is something wrong
Bolded is your problem, 3GB cards are new required minimum. Your only option is to start miner only on GPU0 (3GB one), look few post above how to do that (in your case use parameter --cuda_devices 0 for GPU0). gsanjin if you was read i say GP0 is use only for mining aka always in any mining application i enable only GP0 aka in EWBF case i have "--cuda_devices 0" used, so what you was say is not issue, thx anyway @Overdrive5 you to was not read all what i write 650 GPU = "used for my own necessitate, browsing, working, sometime gaming" is NOT use for mining ... only 1060 read full post what done on previos page aka here https://bitcointalk.org/index.php?topic=4466962.msg41579162#msg41579162Yes, on second read  You're using v0.3? There were problems with 3GB on first versions of miner on Win 10 because of way Win 10 addresses GPU memory, but I see you use Win 7. Have you tried using --cuda_devices 1 maybe gpu ordering is wrong? Any difference if you try mining with just one card in system?
|
|
|
|
Hurtman
|
 |
July 05, 2018, 08:39:21 PM |
|
EWBF_ is there any news about the normal support of Maxwell? (GTX 970/980)
|
|
|
|
SouthWEBA
Copper Member
Newbie
Offline
Activity: 5
Merit: 0
|
 |
July 05, 2018, 09:21:39 PM |
|
Hello @EWBF_
hardware:
motherboard: asrock h110 pro btc (13gpu) memory : 4gb cpu Celeron 3930 UNIX - Fedora
Version 0.3.4b working super to ZEC
video cards: 13 gtx EVGA SC2 1080Ti
issue:
gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. May be build the miner to detect all gpus at the very start?
I tested to start 2 miner
cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12
and is very very very slow process detected card :-( and crashed EWBF
Please help me ASAP i have +- 3000 card
13x1070 card working normal
Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version! This version not working :-( I use CUDA 8 06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version
|
|
|
|
sir_blacks
Jr. Member
Offline
Activity: 119
Merit: 1
|
 |
July 05, 2018, 09:25:48 PM |
|
Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version! @EWBF_ hmm after i take this new test version miner it start running what it make me think in other version when it use --cuda_devices 0 & there are 2,3 gpu in reality miner it was not deselect other one coz check this: --cuda_devices 1 (2 GPU) - v0.3 normal version +-------------------------------------------------+ | EWBF's Eqihash CUDA miner. v0.3 | +-------------------------------------------------+ 23:55:57 INFO: Current pool: btg.suprnova.cc:8866 23:55:57 INFO: Selected pools: 1 23:55:57 INFO: Algorithm: 144_5 "BgoldPoW" 23:55:57 INFO: Devices: User defined. 23:55:57 INFO: Temperature limit: 90 23:55:57 INFO: Api: Disabled --------------------------------------------------- 23:55:57 INFO: Target: 00f0f0f0f0f0f0f0... 23:55:57 INFO: Detected new work: 62f 23:55:58 CUDA: Device: 0 GeForce GTX 1060 3GB Not selected. 23:55:58 ERROR: out of memory
--cuda_devices 0 (2 GPU) - v0.3 normal version +-------------------------------------------------+ | EWBF's Eqihash CUDA miner. v0.3 | +-------------------------------------------------+ 20:15:04 INFO: Current pool: btg.suprnova.cc:8866 20:15:04 INFO: Selected pools: 1 20:15:04 INFO: Algorithm: 144_5 "BgoldPoW" 20:15:04 INFO: Devices: User defined. 20:15:04 INFO: Temperature limit: 90 20:15:04 INFO: Api: Disabled --------------------------------------------------- 20:15:04 INFO: Target: 00f0f0f0f0f0f0f0... 20:15:04 INFO: Detected new work: 5b7 20:15:04 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64 20:15:04 ERROR: out of memory
--cuda_devices 0 (2 GPU) - new test version functional one +-------------------------------------------------+ | EWBF's Eqihash CUDA miner. v0.3 | +-------------------------------------------------+ 00:11:37 INFO: Current pool: btg.suprnova.cc:8866 00:11:37 INFO: Selected pools: 1 00:11:37 INFO: Algorithm: 144_5 "BgoldPoW" 00:11:37 INFO: Devices: User defined. 00:11:37 INFO: Temperature limit: 90 00:11:37 INFO: Api: Disabled --------------------------------------------------- 00:11:38 INFO: Target: 00f0f0f0f0f0f0f0... 00:11:38 INFO: Detected new work: 636 00:11:38 Device detection: 00:11:38 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64 00:11:38 CUDA: Device: 1 GeForce GTX 650 Not selected. 00:11:38 Running device threads: 00:11:38 CUDA: Device: GeForce GTX 1060 3GB 0000:01:00.0 started...
Power Limit: 74%, Core Clock: +164, Memory: +500 (Samsung Vram) 00:20:46 Temp: GPU0: 63C 00:20:46 GPU0: 24 Sol/s 00:20:46 Total speed: 24 Sol/s 00:20:46 -----------+--------------+ | GPU | Power usage | Efficiency | +-----+-------------+--------------+ | 0 | 82W | 0.29 Sol/W | +-----+-------------+--------------+
so conclusion new test version it fix using device correctly (cuda 9.1) ....
|
|
|
|
cirlama
Jr. Member
Offline
Activity: 156
Merit: 1
|
 |
July 05, 2018, 09:32:16 PM |
|
for me, mining zero with gtx 1080 ti, efficiency is better with high intensity (--intensity 90 --algo 192_7) and reduced power (like 65 to 70%), 33 sol/s (+400 mem, +80 core, 65% power)
similar results for MNX coin (--intensity 90 --algo 96_5)
with base intensity, I need more power in Watt to achieve the same hashrate
|
|
|
|
gsanjin
Member

Offline
Activity: 191
Merit: 12
|
 |
July 05, 2018, 10:02:30 PM |
|
so conclusion new test version it fix using device correctly (cuda 9.1) ....
Glad you found out solution, after all it was bug in device selection code.
|
|
|
|
sir_blacks
Jr. Member
Offline
Activity: 119
Merit: 1
|
 |
July 05, 2018, 10:10:15 PM |
|
so conclusion new test version it fix using device correctly (cuda 9.1) ....
Glad you found out solution, after all it was bug in device selection code. well merit it need go to @EWBF_ coz it came with this test version  is fine
|
|
|
|
EWBF_
|
 |
July 05, 2018, 10:23:42 PM |
|
Hello @EWBF_
hardware:
motherboard: asrock h110 pro btc (13gpu) memory : 4gb cpu Celeron 3930 UNIX - Fedora
Version 0.3.4b working super to ZEC
video cards: 13 gtx EVGA SC2 1080Ti
issue:
gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. May be build the miner to detect all gpus at the very start?
I tested to start 2 miner
cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12
and is very very very slow process detected card :-( and crashed EWBF
Please help me ASAP i have +- 3000 card
13x1070 card working normal
Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version! This version not working :-( I use CUDA 8 06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version Added cuda 8 version.
|
|
|
|
EWBF_
|
 |
July 05, 2018, 10:35:42 PM |
|
Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version! @EWBF_ hmm after i take this new test version miner it start running what it make me think in other version when it use --cuda_devices 0 & there are 2,3 gpu in reality miner it was not deselect other one coz check this: --cuda_devices 1 (2 GPU) - v0.3 normal version +-------------------------------------------------+ | EWBF's Eqihash CUDA miner. v0.3 | +-------------------------------------------------+ 23:55:57 INFO: Current pool: btg.suprnova.cc:8866 23:55:57 INFO: Selected pools: 1 23:55:57 INFO: Algorithm: 144_5 "BgoldPoW" 23:55:57 INFO: Devices: User defined. 23:55:57 INFO: Temperature limit: 90 23:55:57 INFO: Api: Disabled --------------------------------------------------- 23:55:57 INFO: Target: 00f0f0f0f0f0f0f0... 23:55:57 INFO: Detected new work: 62f 23:55:58 CUDA: Device: 0 GeForce GTX 1060 3GB Not selected. 23:55:58 ERROR: out of memory
--cuda_devices 0 (2 GPU) - v0.3 normal version +-------------------------------------------------+ | EWBF's Eqihash CUDA miner. v0.3 | +-------------------------------------------------+ 20:15:04 INFO: Current pool: btg.suprnova.cc:8866 20:15:04 INFO: Selected pools: 1 20:15:04 INFO: Algorithm: 144_5 "BgoldPoW" 20:15:04 INFO: Devices: User defined. 20:15:04 INFO: Temperature limit: 90 20:15:04 INFO: Api: Disabled --------------------------------------------------- 20:15:04 INFO: Target: 00f0f0f0f0f0f0f0... 20:15:04 INFO: Detected new work: 5b7 20:15:04 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64 20:15:04 ERROR: out of memory
--cuda_devices 0 (2 GPU) - new test version functional one +-------------------------------------------------+ | EWBF's Eqihash CUDA miner. v0.3 | +-------------------------------------------------+ 00:11:37 INFO: Current pool: btg.suprnova.cc:8866 00:11:37 INFO: Selected pools: 1 00:11:37 INFO: Algorithm: 144_5 "BgoldPoW" 00:11:37 INFO: Devices: User defined. 00:11:37 INFO: Temperature limit: 90 00:11:37 INFO: Api: Disabled --------------------------------------------------- 00:11:38 INFO: Target: 00f0f0f0f0f0f0f0... 00:11:38 INFO: Detected new work: 636 00:11:38 Device detection: 00:11:38 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64 00:11:38 CUDA: Device: 1 GeForce GTX 650 Not selected. 00:11:38 Running device threads: 00:11:38 CUDA: Device: GeForce GTX 1060 3GB 0000:01:00.0 started...
Power Limit: 74%, Core Clock: +164, Memory: +500 (Samsung Vram) 00:20:46 Temp: GPU0: 63C 00:20:46 GPU0: 24 Sol/s 00:20:46 Total speed: 24 Sol/s 00:20:46 -----------+--------------+ | GPU | Power usage | Efficiency | +-----+-------------+--------------+ | 0 | 82W | 0.29 Sol/W | +-----+-------------+--------------+
so conclusion new test version it fix using device correctly (cuda 9.1) .... Good that it helped, I will fix this part of the code and include the fix in the next version. Thanks for the feedback.
|
|
|
|
EWBF_
|
 |
July 05, 2018, 10:37:21 PM |
|
EWBF_ is there any news about the normal support of Maxwell? (GTX 970/980)
Sorry, right now there is no news, I'm working on it.
|
|
|
|
teammaf
Newbie
Offline
Activity: 38
Merit: 0
|
 |
July 06, 2018, 03:52:01 AM |
|
can the intensity be set higher then 64? Does it even have much effect?
|
|
|
|
valaki
Newbie
Offline
Activity: 6
Merit: 0
|
 |
July 06, 2018, 05:29:23 AM |
|
"Quote from: EWBF_ on June 14, 2018, 10:55:16 PM Good that it helped, I will fix this part of the code and include the fix in the next version. Thanks for the feedback."
And EWBF_ please dont forget change -intensity command real 1-64 scale (here intensity 1 and same eat computer resources than 64.., nothing change), its very important! Thank you.
|
|
|
|
|