lolMiner 1.64: Fastest Kaspa miner in market

[KingsGroup.IT]

How does nicehash get +45 sol (algo Zhash) with a AMD HD7990 GPU using lol miner 1.21?
I downloaded this original version from gihub and... starting it... gives me a maximum of 21 sol.. with the exact same gpu.
how does nicehash do?

To me this looks like you are only mining on one of the two GPUs of this dual GPU card. As I posted yesterday, I can get 24sol/s on a single of these GPUs (at 950/1500 clocks with the timing mod). So when properly set up to run on both GPUs that sounds feasible. Look at the output of ./lolMiner --list-devices.

no... With nice hash miner ... each GPU mines + 20 sol each one .. Using the original version of lolminer each gpu makes a maximum of 10 sol each one

[jgonzi]

The best I could get for my 1070s was 26 MH/s at 70 TDP, Core 100, and Memory 600 which keeps them below 70C; if i increase memory up to 620 the rig is unstable. One with double fan goes up to 29 MH/s.

I suppose you are in Windows?... the Serie 10x0 sometimes need to check if reducing Mhz of the memory goes faster... because the memory is making errors and the gpu tries to recheck... that makes a reduction of the Mhs too... and a decrease of the Memory Mhz helps to have less mem errors an increase the hashrate

TDP is to low. Set a fixed vcore to 900mv for example. I can do  around 28mh with 120w. By the way why no one used fixed vcore on Nvidia cards? All decrease Powerlimit, but with fixed vcore, the rigs runs more stable, the wattage don´t jump up and down. We all set fixed vcore on amd gpu´s, but no one use it on nvidia cards 

And not all pascal gpus have this TLB failure, the 1070ti´s have slightly other architecture, and there the hashrate don´t decrease with every new epoch. I have a few 1070ti´s running with 34 - 35 mh with same settings for 2 years now.

That can be done the the fix in Windows and now is also a option in RaveOS

[KingsGroup.IT]

How does nicehash get +45 sol (algo Zhash) with a AMD HD7990 GPU using lol miner 1.21?
I downloaded this original version from gihub and... starting it... gives me a maximum of 21 sol.. with the exact same gpu.
how does nicehash do?

To me this looks like you are only mining on one of the two GPUs of this dual GPU card. As I posted yesterday, I can get 24sol/s on a single of these GPUs (at 950/1500 clocks with the timing mod). So when properly set up to run on both GPUs that sounds feasible. Look at the output of ./lolMiner --list-devices.

no... With nice hash miner ... each GPU mines + 20 sol each one .. Using the original version of lolminer each gpu makes a maximum of 10 sol each one

does anyone understand how nicehash does it?
os = Win 10 x64

[SCF0]

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

[KingsGroup.IT]

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

set "POOL=btg.2miners.com:4040"
set "WALLET=xxxxxxxxxxxxxxxxxxx.workerName"
set "ALGO=EQUI144_5"
set "PERSONALIZATION=BgoldPoW"                           

Rem #################################
Rem ##  End of user-editable part  ##
Rem #################################

lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
pause

[jgonzi]

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

set "POOL=btg.2miners.com:4040"
set "WALLET=xxxxxxxxxxxxxxxxxxx.workerName"
set "ALGO=EQUI144_5"
set "PERSONALIZATION=BgoldPoW"                           

Rem #################################
Rem ##  End of user-editable part  ##
Rem #################################

lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
pause

I always recommend

:loop
lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
timeout 10
goto loop

[dimidimi]

Hello,
Im having trouble running with 2x XFX rx480 4gb on z170 A pro MotherBoard (2x x16pci) on ETH
When i run ONE card using lolminer i get 19-20mh
--4g-alloc-size 4248 --keepfree 8 --devices 0

if allocation size is below this value, i get a joke hash (2-3mh)

As soon as i put second rx480 here is what happends

Card1: 14-15mh
Card2: 4-5mh


Set Gen3,
bove 4G decoding: enabled
driver version  adrenaline 20.11.2
Windows 10

Im using windows, booted from m2 drive on motherboard, is it possible that it makes a conflict, will switching to linux help.
Never mined in linux before.

Thanks, kind regards

[jgonzi]

Hello,
Im having trouble running with 2x XFX rx480 4gb on z170 A pro MotherBoard (2x x16pci) on ETH
When i run ONE card using lolminer i get 19-20mh
--4g-alloc-size 4248 --keepfree 8 --devices 0

if allocation size is below this value, i get a joke hash (2-3mh)

As soon as i put second rx480 here is what happends

Card1: 14-15mh
Card2: 4-5mh


Set Gen3,
bove 4G decoding: enabled
driver version  adrenaline 20.11.2
Windows 10

Im using windows, booted from m2 drive on motherboard, is it possible that it makes a conflict, will switching to linux help.
Never mined in linux before.

Thanks, kind regards

That normal... with 1 Card you are using x16, when you put both is x8,x8...

[lxspector]

Hi, please do something with eror wathdog - I can't use MRR login/ETH wallet, ex.: user.123456. Miner erise "." like a mistake. So don't work ETH+ZIL mining

[dimidimi]

That normal... with 1 Card you are using x16, when you put both is x8,x8...

But I seen ppl on group that can mine 2x RX4xx cards if there are two x16 slots (x8 x2) is it cause dag went up or..?

[dext-r]

Hello,
Im having trouble running with 2x XFX rx480 4gb on z170 A pro MotherBoard (2x x16pci) on ETH
When i run ONE card using lolminer i get 19-20mh
--4g-alloc-size 4248 --keepfree 8 --devices 0

if allocation size is below this value, i get a joke hash (2-3mh)

As soon as i put second rx480 here is what happends

Card1: 14-15mh
Card2: 4-5mh


Set Gen3,
bove 4G decoding: enabled
driver version  adrenaline 20.11.2
Windows 10

Im using windows, booted from m2 drive on motherboard, is it possible that it makes a conflict, will switching to linux help.
Never mined in linux before.

Thanks, kind regards

It's a miracle to mine in windows with 4gb 10+ mh/s

MSI Z170 Pro A mobo: • 2 x PCIe 3.0 x16 slots (support x16/ x4 modes)

if you use M.2 ssd that can use some PCIe lanes, use some USB flash or SATA ssd and some linux for better hashrate

[dimidimi]

It's a miracle to mine in windows with 4gb 10+ mh/s

MSI Z170 Pro A mobo: • 2 x PCIe 3.0 x16 slots (support x16/ x4 modes)

if you use M.2 ssd that can use some PCIe lanes, use some USB flash or SATA ssd and some linux for better hashrate

Ye man, sadly my windows is on m2ssd. possibly what takes some lanes away, and i use this deskop daily so sad.
I do mine with 1070ti around 29mh and rx480 around 19mh if single x16 is taken

[SCF0]

I always recommend

:loop
lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
timeout 10
goto loop

This won't help KingsGroup.IT though but it is an improvement if you want to keep the miner up after crashes.

KingsGroup.IT, can you post the output of lolMiner.exe --list-devices? I still suspect it's somehow not using both GPUs properly. Also you mentioned Nicehash, do they use lolMiner or a different miner for Zhash? I know they used to use various 3rdparty miners but I never really liked their auto-switching so I preferred to setup miners manually even when mining on Nicehash.

[jgonzi]

I always recommend

:loop
lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
timeout 10
goto loop

This won't help KingsGroup.IT though but it is an improvement if you want to keep the miner up after crashes.

KingsGroup.IT, can you post the output of lolMiner.exe --list-devices? I still suspect it's somehow not using both GPUs properly. Also you mentioned Nicehash, do they use lolMiner or a different miner for Zhash? I know they used to use various 3rdparty miners but I never really liked their auto-switching so I preferred to setup miners manually even when mining on Nicehash.

I think you are right with your comments...  is always better to get the server parameters from https://www.nicehash.com/stratum-generator

[jgonzi]

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

set "POOL=btg.2miners.com:4040"
set "WALLET=xxxxxxxxxxxxxxxxxxx.workerName"
set "ALGO=EQUI144_5"
set "PERSONALIZATION=BgoldPoW"                           

Rem #################################
Rem ##  End of user-editable part  ##
Rem #################################

lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
pause

Did you solve it?

[dimidimi]

Please check these
I updated my rig of two rx480 xfx to mine eth using hiveos
Both into x16 slots
 
Z170 A pro Motherboard
1card 28mh
2card 7mh
Cpu intel 7500
8gb ram

Hash rates went up nicely compared to windows but i wonder if its possible to make them run both
How do i configure lanes property.
I can't make second Pci to run at good rate, swapped the cards which proved its not gpu issue

[batsonxl]

Can someone share rx470-570 4G Beam mining hashrates and oc settings?i mean get maximum hashrate that possible. Thanks

[jgonzi]

Please check these
I updated my rig of two rx480 xfx to mine eth using hiveos
Both into x16 slots
 
Z170 A pro Motherboard
1card 28mh
2card 7mh
Cpu intel 7500
8gb ram

Hash rates went up nicely compared to windows but i wonder if its possible to make them run both
How do i configure lanes property.
I can't make second Pci to run at good rate, swapped the cards which proved its not gpu issue

Did you add a 4g-alloc-size parameters?

[dext-r]

Please check these
I updated my rig of two rx480 xfx to mine eth using hiveos
Both into x16 slots
 
Z170 A pro Motherboard
1card 28mh
2card 7mh
Cpu intel 7500
8gb ram

Hash rates went up nicely compared to windows but i wonder if its possible to make them run both
How do i configure lanes property.
I can't make second Pci to run at good rate, swapped the cards which proved its not gpu issue

There fails PCI express Gen3 parameters, not auto, and if you don't enable onboard gpu as primary that's the other problem,

[hackhy]

Can you support AMD Mi100

+---------------------------------------------------------+
|  _       _ __  __ _                   _   ____  _  _    |
| | | ___ | |  \/  (_)_ __   ___ _ __  / | |___ \| || |   |
| | |/ _ \| | |\/| | | '_ \ / _ \ '__| | |   __) | || |_  |
| | | (_) | | |  | | | | | |  __/ |    | |_ / __/|__   _| |
| |_|\___/|_|_|  |_|_|_| |_|\___|_|    |_(_)_____|  |_|   |
|                                                         |
|              This software is for mining                |
|              Ethash, Etchash                            |
|              Equihash 144/5, 192/7, 210/9               |
|              BeamHash I, II, III                        |
|              ZelHash     (EquihashR 125/4/0)            |
|              Cuck(ar)oo 29                              |
|              Cuckaroo   30 CTX                          |
|              Cuckatoo   31/32                           |
|                                                         |
|                                                         |
|           Made by Lolliedieb, February 2021             |
+---------------------------------------------------------+

Setup Miner...
Device 0:
    Name:    Device 738c
    Address: 4294967268:0
    Vendor:  Advanced Micro Devices (AMD), ROCm
    Memory:  32752 MByte (32752 MByte free)
    Active:  false (Unsupported device or driver version.)



root@amd:~# /opt/rocm-4.0.0/opencl/bin/clinfo
Number of platforms:                             1
  Platform Profile:                              FULL_PROFILE
  Platform Version:                              OpenCL 2.0 AMD-APP (3212.0)
  Platform Name:                                 AMD Accelerated Parallel Proces                                             sing
  Platform Vendor:                               Advanced Micro Devices, Inc.
  Platform Extensions:                           cl_khr_icd cl_amd_event_callbac                                             k


  Platform Name:                                 AMD Accelerated Parallel Proces                                             sing
Number of devices:                               1
  Device Type:                                   CL_DEVICE_TYPE_GPU
  Vendor ID:                                     1002h
  Board name:                                    Device 738c
  Device Topology:                               PCI[ B#228, D#0, F#0 ]
  Max compute units:                             120
  Max work items dimensions:                     3
    Max work items[0]:                           1024
    Max work items[1]:                           1024
    Max work items[2]:                           1024
  Max work group size:                           256
  Preferred vector width char:                   4
  Preferred vector width short:                  2
  Preferred vector width int:                    1
  Preferred vector width long:                   1
  Preferred vector width float:                  1
  Preferred vector width double:                 1
  Native vector width char:                      4
  Native vector width short:                     2
  Native vector width int:                       1
  Native vector width long:                      1
  Native vector width float:                     1
  Native vector width double:                    1
  Max clock frequency:                           1502Mhz
  Address bits:                                  64
  Max memory allocation:                         29191516976
  Image support:                                 Yes
  Max number of images read arguments:           128
  Max number of images write arguments:          8
  Max image 2D width:                            16384
  Max image 2D height:                           16384
  Max image 3D width:                            16384
  Max image 3D height:                           16384
  Max image 3D depth:                            8192
  Max samplers within kernel:                    29580
  Max size of kernel argument:                   1024
  Alignment (bits) of base address:              1024
  Minimum alignment (bytes) for any datatype:    128
  Single precision floating point capability
    Denorms:                                     Yes
    Quiet NaNs:                                  Yes
    Round to nearest even:                       Yes
    Round to zero:                               Yes
    Round to +ve and infinity:                   Yes
    IEEE754-2008 fused multiply-add:             Yes
  Cache type:                                    Read/Write
  Cache line size:                               64
  Cache size:                                    16384
  Global memory size:                            34342961152
  Constant buffer size:                          29191516976
  Max number of constant args:                   8
  Local memory type:                             Scratchpad
  Local memory size:                             65536
  Max pipe arguments:                            16
  Max pipe active reservations:                  16
  Max pipe packet size:                          3421713200
  Max global variable size:                      29191516976
  Max global variable preferred total size:      34342961152
  Max read/write image args:                     64
  Max on device events:                          1024
  Queue on device max size:                      8388608
  Max on device queues:                          1
  Queue on device preferred size:                262144
  SVM capabilities:
    Coarse grain buffer:                         Yes
    Fine grain buffer:                           Yes
    Fine grain system:                           No
    Atomics:                                     No
  Preferred platform atomic alignment:           0
  Preferred global atomic alignment:             0
  Preferred local atomic alignment:              0
  Kernel Preferred work group size multiple:     64
  Error correction support:                      0
  Unified memory for Host and Device:            0
  Profiling timer resolution:                    1
  Device endianess:                              Little
  Available:                                     Yes
  Compiler available:                            Yes
  Execution capabilities:
    Execute OpenCL kernels:                      Yes
    Execute native function:                     No
  Queue on Host properties:
    Out-of-Order:                                No
    Profiling :                                  Yes
  Queue on Device properties:
    Out-of-Order:                                Yes
    Profiling :                                  Yes
  Platform ID:                                   0x7f58399b7cf0
  Name:                                          gfx908
  Vendor:                                        Advanced Micro Devices, Inc.
  Device OpenCL C version:                       OpenCL C 2.0
  Driver version:                                3212.0 (HSA1.1,LC)
  Profile:                                       FULL_PROFILE
  Version:                                       OpenCL 2.0
  Extensions:                                    cl_khr_fp64 cl_khr_global_int32                                             _base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomi                                             cs cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_ex                                             tended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_fp16                                              cl_khr_gl_sharing cl_amd_device_attribute_query cl_amd_media_ops cl_amd_media_op                                             s2 cl_khr_image2d_from_buffer cl_khr_subgroups cl_khr_depth_images cl_amd_copy_b                                             uffer_p2p cl_amd_assembly_program





/opt/rocm/bin/rocminfo
  ISA Info:
    ISA 1
      Name:                    amdgcn-amd-amdhsa--gfx908
      Machine Models:          HSA_MACHINE_MODEL_LARGE
      Profiles:                HSA_PROFILE_BASE
      Default Rounding Mode:   NEAR
      Default Rounding Mode:   NEAR
      Fast f16:                TRUE
      Workgroup Max Size:      1024(0x400)
      Workgroup Max Size per Dimension:
        x                        1024(0x400)
        y                        1024(0x400)
        z                        1024(0x400)
      Grid Max Size:           4294967295(0xffffffff)
      Grid Max Size per Dimension:
        x                        4294967295(0xffffffff)
        y                        4294967295(0xffffffff)
        z                        4294967295(0xffffffff)
      FBarrier Max Size:       32



/opt/rocm/opencl/bin/clinfo
Number of platforms:                             1
  Platform Profile:                              FULL_PROFILE
  Platform Version:                              OpenCL 2.0 AMD-APP (3212.0)
  Platform Name:                                 AMD Accelerated Parallel Processing
  Platform Vendor:                               Advanced Micro Devices, Inc.
  Platform Extensions:                           cl_khr_icd cl_amd_event_callback


  Platform Name:                                 AMD Accelerated Parallel Processing
Number of devices:                               1
  Device Type:                                   CL_DEVICE_TYPE_GPU
  Vendor ID:                                     1002h
  Board name:                                    Device 738c
  Device Topology:                               PCI[ B#228, D#0, F#0 ]
  Max compute units:                             120
  Max work items dimensions:                     3
    Max work items[0]:                           1024
    Max work items[1]:                           1024
    Max work items[2]:                           1024
  Max work group size:                           256
  Preferred vector width char:                   4
  Preferred vector width short:                  2
  Preferred vector width int:                    1
  Preferred vector width long:                   1
  Preferred vector width float:                  1
  Preferred vector width double:                 1
  Native vector width char:                      4
  Native vector width short:                     2
  Native vector width int:                       1
  Native vector width long:                      1
  Native vector width float:                     1
  Native vector width double:                    1
  Max clock frequency:                           1502Mhz
  Address bits:                                  64
  Max memory allocation:                         29191516976
  Image support:                                 Yes
  Max number of images read arguments:           128
  Max number of images write arguments:          8
  Max image 2D width:                            16384
  Max image 2D height:                           16384
  Max image 3D width:                            16384
  Max image 3D height:                           16384
  Max image 3D depth:                            8192
  Max samplers within kernel:                    29580
  Max size of kernel argument:                   1024
  Alignment (bits) of base address:              1024
  Minimum alignment (bytes) for any datatype:    128
  Single precision floating point capability
    Denorms:                                     Yes
    Quiet NaNs:                                  Yes
    Round to nearest even:                       Yes
    Round to zero:                               Yes
    Round to +ve and infinity:                   Yes
    IEEE754-2008 fused multiply-add:             Yes
  Cache type:                                    Read/Write
  Cache line size:                               64
  Cache size:                                    16384
  Global memory size:                            34342961152
  Constant buffer size:                          29191516976
  Max number of constant args:                   8
  Local memory type:                             Scratchpad
  Local memory size:                             65536
  Max pipe arguments:                            16
  Max pipe active reservations:                  16
  Max pipe packet size:                          3421713200
  Max global variable size:                      29191516976
  Max global variable preferred total size:      34342961152
  Max read/write image args:                     64
  Max on device events:                          1024
  Queue on device max size:                      8388608
  Max on device queues:                          1
  Queue on device preferred size:                262144
  SVM capabilities:
    Coarse grain buffer:                         Yes
    Fine grain buffer:                           Yes
    Fine grain system:                           No
    Atomics:                                     No
  Preferred platform atomic alignment:           0
  Preferred global atomic alignment:             0
  Preferred local atomic alignment:              0
  Kernel Preferred work group size multiple:     64
  Error correction support:                      0
  Unified memory for Host and Device:            0
  Profiling timer resolution:                    1
  Device endianess:                              Little
  Available:                                     Yes
  Compiler available:                            Yes
  Execution capabilities:
    Execute OpenCL kernels:                      Yes
    Execute native function:                     No
  Queue on Host properties:
    Out-of-Order:                                No
    Profiling :                                  Yes
  Queue on Device properties:
    Out-of-Order:                                Yes
    Profiling :                                  Yes
  Platform ID:                                   0x7feb5bff2cf0
  Name:                                          gfx908
  Vendor:                                        Advanced Micro Devices, Inc.
  Device OpenCL C version:                       OpenCL C 2.0
  Driver version:                                3212.0 (HSA1.1,LC)
  Profile:                                       FULL_PROFILE
  Version:                                       OpenCL 2.0
  Extensions:                                    cl_khr_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_fp16 cl_khr_gl_sharing cl_amd_device_attribute_query cl_amd_media_ops cl_amd_media_ops2 cl_khr_image2d_from_buffer cl_khr_subgroups cl_khr_depth_images cl_amd_copy_buffer_p2p cl_amd_assembly_program