[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs

[raskul]

pools report hashrates using packet data sent from your miner, so the hashrate showing at your pool is likely to be showing on a slight delay, and usually not exact. Best always to go by the stats showing on the UI / Cgminer.

The stats in the UI are definitely lower than before.  The pool - you're right, there's variance because it's based on data packets sent.  It's now at 3.9 TH.  Still better than before though, which ranged from 3.7 to 4 TH (super lows and super highs).

Right now my super lows and highs are 3.8 TH and 4.1 TH.  You can never go by those numbers of course.  Avg seems to be about 100 GH more on the pool (or about 33 GH faster each miner when you divide by 3).

yup... you should try mining on a DGM pool, the highs and lows are ridiculously off! I've seen my SP10 showing as much as 1.7TH/s on Ozcoin... currently showing 1.56TH/s on mmpool.

[jonnybravo0311]

Ok, Con knows of the issue, it will be fixed soon.
For now use previous version for p2p.

Did the 1.4.2 firmware update do something to disable mining on p2pool?  I have updated, and now my SP10 will not connect to ANY p2pool node.  I can connect to Eligius, BTCGuild, GHash, etc.  My local p2pool node?  No.  Any other p2pool node?  No.  Before anyone asks... yes, my local node is up.  I can confirm this because my 2 S1s are happily hashing away on it.  I have also pointed those two to another p2pool node and they hashed there as well.

Thanks for the help.

Thanks Zvisha.  I tried 1.4.3, and it also does not see any p2pool node.  I'll go back to 1.3.49 until a fix can be made.

BTW, do you know how much bandwidth P2P node takes in cgminer for SP10? What hash rate it provides and what is the leading zeroes?

Here's a snapshot of my ASIC stats page from just a few seconds ago:

Code:

----------
AC2DC power=1096[1100], temp=0, leading zeroes=39
L |Vtrm/max  |vlt|Wt|Am|DCt|crt|Gh|Ov|ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn 
 0|ffec(fff6)|661|32|49| 71|  0|55| 0|  0: 77c 480hz( 0/ 0) 7fff 15|  1: 77c 480hz( 0/ 0) 7fff 16|  2: 77c 465hz( 0/ 0) 7fff 25|  3: 77c 450hz( 0/ 0) 7fff 17
                                     |  4: 77c 480hz( 0/ 0) 7fff 14|  5: 77c 435hz( 0/ 0) 7fff 10|  6: 77c 465hz( 0/ 0) 7fff 18|  7: 77c 450hz( 0/ 0) 7fff 16
 1|ffeb(fff6)|658|32|49| 64|  0|55| 0|  8: 77c 450hz( 0/ 0) 7fff 10|  9: 77c 495hz( 0/ 0) 7fff 15| 10: 77c 495hz( 0/ 0) 7fff 12| 11: 77c 450hz( 0/ 0) 7fff  9
                                     | 12: 77c 450hz( 0/ 0) 7fff 19| 13: 77c 450hz( 0/ 0) 7fff 16| 14: 77c 450hz( 0/ 0) 7fff 10| 15: 77c 450hz( 0/ 0) 7fff  9
 2|ffeb(fff6)|658|31|48| 62|  0|54| 0| 16: 77c 435hz( 0/ 0) 7fff 14| 17: 77c 480hz( 0/ 0) 7fff 12| 18: 77c 450hz( 0/ 0) 7fff 11| 19: 77c 450hz( 0/ 0) 7fff 11
                                     | 20: 77c 480hz( 0/ 0) 7fff 18| 21: 77c 465hz( 0/ 0) 7fff 22| 22: 77c 480hz( 0/ 0) 7fff 12| 23: 77c 420hz( 0/ 0) 7fff 12
 3|ffeb(fff6)|658|32|49| 65|  0|54| 0| 24: 77c 465hz( 0/ 0) 7fff 15| 25: 77c 420hz( 0/ 0) 7fff 15| 26: 77c 450hz( 0/ 0) 7fff  7| 27: 77c 450hz( 0/ 0) 7fff 10
                                     | 28: 77c 465hz( 0/ 0) 7fff 12| 29: 77c 465hz( 0/ 0) 7fff 20| 30: 77c 480hz( 0/ 0) 7fff 20| 31: 77c 465hz( 0/ 0) 7fff 18
 4|ffea(fff6)|656|32|49| 72|  0|54| 0| 32: 77c 480hz( 0/ 0) 7fff 15| 33: 77c 450hz( 0/ 0) 7fff 16| 34: 77c 435hz( 0/ 0) 7fff 18| 35: 77c 465hz( 0/ 0) 7fff 25
                                     | 36: 77c 450hz( 0/ 0) 7fff 15| 37: 77c 450hz( 0/ 0) 7fff 11| 38: 77c 465hz( 0/ 0) 7fff 17| 39: 77c 465hz( 0/ 0) 7fff 18
 5|ffea(fff6)|656|32|50| 67|  0|55| 0| 40: 77c 450hz( 0/ 0) 7fff 14| 41: 77c 480hz( 0/ 0) 7fff 13| 42: 77c 480hz( 0/ 0) 7fff  6| 43: 77c 465hz( 0/ 0) 7fff 14
                                     | 44: 77c 465hz( 0/ 0) 7fff 12| 45: 77c 435hz( 0/ 0) 7fff  5| 46: 77c 465hz( 0/ 0) 7fff 13| 47: 77c 480hz( 0/ 0) 7fff 14
 6|ffea(fff6)|656|33|50| 56|  0|53| 0| 48: 77c 435hz( 0/ 0) 7fff 17| 49: 77c 465hz( 0/ 0) 7fff  9| 50: 77c 405hz( 0/ 0) 7fff 15| 51: 77c 465hz( 0/ 0) 7fff 20
                                     | 52: 77c 450hz( 0/ 0) 7fff 13| 53: 77c 435hz( 0/ 0) 7fff 12| 54: 77c 465hz( 0/ 0) 7fff 18| 55: 77c 450hz( 0/ 0) 7fff 11
 7|ffea(fff6)|656|33|50| 82|  0|54| 0| 56: 77c 435hz( 0/ 0) 7fff 11| 57: 77c 480hz( 0/ 0) 7fff 18| 58: 77c 480hz( 0/ 0) 7fff 15| 59: 77c 465hz( 0/ 0) 7fff 23
                                     | 60: 77c 435hz( 0/ 0) 7fff 17| 61: 77c 465hz( 0/ 0) 7fff 11| 62: 77c 465hz( 0/ 0) 7fff 14| 63: 77c 420hz( 0/ 0) 7fff 21
 8|ffea(fff6)|656|33|51| 76|  0|55| 0| 64: 77c 450hz( 0/ 0) 7fff 12| 65: 77c 480hz( 0/ 0) 7fff 11| 66: 77c 450hz( 0/ 0) 7fff 14| 67: 77c 465hz( 0/ 0) 7fff 14
                                     | 68: 77c 435hz( 0/ 0) 7fff 11| 69: 77c 465hz( 0/ 0) 7fff 12| 70: 77c 465hz( 0/ 0) 7fff 15| 71: 77c 465hz( 0/ 0) 7fff 13
 9|ffea(fff6)|656|33|51| 72|  0|54| 0| 72: 77c 480hz( 0/ 0) 7fff 24| 73: 77c 450hz( 0/ 0) 7fff 16| 74: 77c 435hz( 0/ 0) 7fff  9| 75: 77c 480hz( 0/ 0) 7fff 21
                                     | 76: 77c 435hz( 0/ 0) 7fff 10| 77: 77c 435hz( 0/ 0) 7fff 11| 78: 77c 465hz( 0/ 0) 7fff  8| 79: 77c 465hz( 0/ 0) 7fff 17
10|ffea(fff6)|656|33|50| 69|  0|55| 0| 80: 77c 480hz( 0/ 0) 7fff 13| 81: 77c 465hz( 0/ 0) 7fff 10| 82: 77c 450hz( 0/ 0) 7fff 15| 83: 77c 435hz( 0/ 0) 7fff  9
                                     | 84: 77c 450hz( 0/ 0) 7fff 21| 85: 77c 465hz( 0/ 0) 7fff 15| 86: 77c 465hz( 0/ 0) 7fff 19| 87: 77c 480hz( 0/ 0) 7fff 12
11|ffe9(fff6)|653|32|50| 73|  0|54| 0| 88: 77c 465hz( 0/ 0) 7fff 17| 89: 77c 450hz( 0/ 0) 7fff 12| 90: 77c 435hz( 0/ 0) 7fff 11| 91: 77c 450hz( 0/ 0) 7fff 11
                                     | 92: 77c 450hz( 0/ 0) 7fff 14| 93: 77c 465hz( 0/ 0) 7fff 12| 94: 77c 435hz( 0/ 0) 7fff 13| 95: 77c 495hz( 0/ 0) 7fff 10
12|ffeb(fff6)|658|32|49| 68|  0|55| 0| 96: 77c 480hz( 0/ 0) 7fff  9| 97: 77c 480hz( 0/ 0) 7fff 13| 98: 77c 435hz( 0/ 0) 7fff  6| 99: 77c 465hz( 0/ 0) 7fff 16
                                     |100: 77c 450hz( 0/ 0) 7fff 14|101: 77c 465hz( 0/ 0) 7fff 12|102: 77c 450hz( 0/ 0) 7fff 18|103: 77c 450hz( 0/ 0) 7fff 18
13|ffeb(fff6)|658|34|52| 74|  0|57| 0|104: 77c 495hz( 0/ 0) 7fff 14|105: 77c 435hz( 0/ 0) 7fff 14|106: 77c 510hz( 0/ 0) 7fff  9|107: 77c 510hz( 0/ 0) 7fff 10
                                     |108: 77c 450hz( 0/ 0) 7fff 13|109: 77c 465hz( 0/ 0) 7fff 14|110: 77c 435hz( 0/ 0) 7fff 13|111: 77c 525hz( 0/ 0) 7fff 14
14|ffeb(fff6)|658|35|54| 79|  0|58| 0|112: 77c 480hz( 0/ 0) 7fff 11|113: 77c 495hz( 0/ 0) 7fff 14|114: 77c 510hz( 0/ 0) 7fff 11|115: 77c 480hz( 0/ 0) 7fff 14
                                     |116: 77c 480hz( 0/ 0) 7fff 18|117: 77c 495hz( 0/ 0) 7fff 11|118: 77c 465hz( 0/ 0) 7fff 13|119: 77c 510hz( 0/ 0) 7fff 22
15|ffeb(fff6)|658|35|53| 74|  0|56| 0|120: 77c 495hz( 0/ 0) 7fff 15|121: 77c 450hz( 0/ 0) 7fff  5|122: 77c 480hz( 0/ 0) 7fff 14|123: 77c 480hz( 0/ 0) 7fff 17
                                     |124: 77c 495hz( 0/ 0) 7fff 17|125: 77c 450hz( 0/ 0) 7fff 20|126: 77c 465hz( 0/ 0) 7fff 11|127: 77c 480hz( 0/ 0) 7fff 10
16|ffea(fff6)|656|36|56| 72|  0|57| 0|128: 77c 465hz( 0/ 0) 7fff 21|129: 77c 465hz( 0/ 0) 7fff  7|130: 77c 480hz( 0/ 0) 7fff 16|131: 77c 480hz( 0/ 0) 7fff 16
                                     |132: 77c 510hz( 0/ 0) 7fff 19|133: 77c 495hz( 0/ 0) 7fff 12|134: 77c 480hz( 0/ 0) 7fff 15|135: 77c 480hz( 0/ 0) 7fff 22
17|ffea(fff6)|656|35|54| 79|  0|56| 0|136: 77c 480hz( 0/ 0) 7fff 21|137: 77c 435hz( 0/ 0) 7fff  9|138: 77c 450hz( 0/ 0) 7fff 15|139: 77c 510hz( 0/ 0) 7fff 18
                                     |140: 77c 480hz( 0/ 0) 7fff 11|141: 77c 465hz( 0/ 0) 7fff 11|142: 77c 495hz( 0/ 0) 7fff 19|143: 77c 480hz( 0/ 0) 7fff 11
18|ffea(fff6)|656|36|55| 73|  0|56| 0|144: 77c 480hz( 0/ 0) 7fff 10|145: 77c 480hz( 0/ 0) 7fff 22|146: 77c 480hz( 0/ 0) 7fff 10|147: 77c 450hz( 0/ 0) 7fff 18
                                     |148: 77c 480hz( 0/ 0) 7fff 17|149: 77c 450hz( 0/ 0) 7fff 12|150: 77c 480hz( 0/ 0) 7fff 16|151: 77c 465hz( 0/ 0) 7fff 11
19|ffea(fff6)|656|35|54| 74|  0|57| 0|152: 77c 480hz( 0/ 0) 7fff 16|153: 77c 480hz( 0/ 0) 7fff  9|154: 77c 480hz( 0/ 0) 7fff 15|155: 77c 480hz( 0/ 0) 7fff 16
                                     |156: 77c 465hz( 0/ 0) 7fff 12|157: 77c 465hz( 0/ 0) 7fff 14|158: 77c 510hz( 0/ 0) 7fff 25|159: 77c 465hz( 0/ 0) 7fff 13
20|ffe9(fff6)|653|36|55| 78|  0|57| 0|160: 77c 480hz( 0/ 0) 7fff 12|161: 77c 495hz( 0/ 0) 7fff 14|162: 77c 465hz( 0/ 0) 7fff 14|163: 77c 510hz( 0/ 0) 7fff 17
                                     |164: 77c 450hz( 0/ 0) 7fff 12|165: 77c 465hz( 0/ 0) 7fff 13|166: 77c 495hz( 0/ 0) 7fff  8|167: 77c 465hz( 0/ 0) 7fff 24
21|ffe9(fff6)|653|34|52| 74|  0|55| 0|168: 77c 495hz( 0/ 0) 7fff 20|169: 77c 480hz( 0/ 0) 7fff 18|170: 77c 495hz( 0/ 0) 7fff 20|171: 77c 450hz( 0/ 0) 7fff 18
                                     |172: 77c 450hz( 0/ 0) 7fff 10|173: 77c 375hz( 0/ 0) 7fff 12|174: 77c 480hz( 0/ 0) 7fff 11|175: 77c 465hz( 0/ 0) 7fff 14
22|ffe9(fff6)|653|34|53| 81|  0|56| 0|176: 77c 480hz( 0/ 0) 7fff 12|177: 77c 435hz( 0/ 0) 7fff  8|178: 77c 480hz( 0/ 0) 7fff 23|179: 77c 495hz( 0/ 0) 7fff 18
                                     |180: 77c 450hz( 0/ 0) 7fff 19|181: 77c 465hz( 0/ 0) 7fff 18|182: 77c 480hz( 0/ 0) 7fff  8|183: 77c 450hz( 0/ 0) 7fff 21
23|ffe8(fff6)|650|36|55| 76|  0|56| 0|184: 77c 480hz( 0/ 0) 7fff 15|185: 77c 495hz( 0/ 0) 7fff 14|186: 77c 465hz( 0/ 0) 7fff 15|187: 77c 495hz( 0/ 0) 7fff 16
                                     |188: 77c 465hz( 0/ 0) 7fff 16|189: 77c 450hz( 0/ 0) 7fff 12|190: 77c 465hz( 0/ 0) 7fff 14|191: 77c 465hz( 0/ 0) 7fff  9
[H:HW:1341Gh/Th:1341Gh/W:1341Gh,W:819,L:24,A:192,ER:1341,EP:1030,MMtmp:23]
Pushed 543 jobs , in queue 75 jobs!
wins:2747[fp:0], leading-zeroes:39 idle:0/0 :)
Adapter queues: rsp=78, req=270

Here's DCR:

Code:

DC2DC DCR inductor flag loop 0 (0xD0) = 1
DC2DC DCR inductor flag loop 1 (0xD0) = 1
DC2DC DCR inductor flag loop 2 (0xD0) = 1
DC2DC DCR inductor flag loop 3 (0xD0) = 1
DC2DC DCR inductor flag loop 4 (0xD0) = 1
DC2DC DCR inductor flag loop 5 (0xD0) = 1
DC2DC DCR inductor flag loop 6 (0xD0) = 1
DC2DC DCR inductor flag loop 7 (0xD0) = 1
DC2DC DCR inductor flag loop 8 (0xD0) = 1
DC2DC DCR inductor flag loop 9 (0xD0) = 1
DC2DC DCR inductor flag loop 10 (0xD0) = 1
DC2DC DCR inductor flag loop 11 (0xD0) = 1
DC2DC DCR inductor flag loop 12 (0xD0) = 1
DC2DC DCR inductor flag loop 13 (0xD0) = 1
DC2DC DCR inductor flag loop 14 (0xD0) = 1
DC2DC DCR inductor flag loop 15 (0xD0) = 1
DC2DC DCR inductor flag loop 16 (0xD0) = 1
DC2DC DCR inductor flag loop 17 (0xD0) = 1
DC2DC DCR inductor flag loop 18 (0xD0) = 1
DC2DC DCR inductor flag loop 19 (0xD0) = 1
DC2DC DCR inductor flag loop 20 (0xD0) = 1
DC2DC DCR inductor flag loop 21 (0xD0) = 1
DC2DC DCR inductor flag loop 22 (0xD0) = 1
DC2DC DCR inductor flag loop 23 (0xD0) = 1

Temps, load, etc:


Stats:


Pool data:


Any other information that I can provide for you, please let me know.

[zvisha]

...
Any other information that I can provide for you, please let me know.

Ok, thanks!

[kendog77]

The "Spondoolies hero of the day" medal goes to user Klondike_bar, for discovering a problem of high error rate on his machine. We released a fix (1.4.3) that should bring the HW error rate down from ~8% to 2%.

Please update ASAP and let me know if the fix works.

my HW errors on firmware version 1.4.2 settled down to about 5%

I will try 1.4.3 and report back tomorrow with results.

thanks zvisha and klondike_bar

BTW, what did klondike_bar discover?

His machine had exceptionally high error rate of over 10%. I have error rate of about 3-4%. He let me use his machine to understand the situation, and I found out that the fix for his machine improves HW errors in all my machines too. It is the way I use BIST to find optimal point, the BIST I did was too weak for many ASICs.
 

Firmware rev 1.4.3 looks like a real winner. I also have a SP10 that was registering around 100 GH/s lower at the pool due to high hardware errors, but firmware rev 1.4.3 seems to have raised the pool hash rate of this unit substantially.

Thanks zvisha!

[wpgdeez]

Excited to get home and try it out!

[zvisha]

Ok, Con knows of the issue, it will be fixed soon.
For now use previous version for p2p.

Did the 1.4.2 firmware update do something to disable mining on p2pool?  I have updated, and now my SP10 will not connect to ANY p2pool node.  I can connect to Eligius, BTCGuild, GHash, etc.  My local p2pool node?  No.  Any other p2pool node?  No.  Before anyone asks... yes, my local node is up.  I can confirm this because my 2 S1s are happily hashing away on it.  I have also pointed those two to another p2pool node and they hashed there as well.

Thanks for the help.

Thanks Zvisha.  I tried 1.4.3, and it also does not see any p2pool node.  I'll go back to 1.3.49 until a fix can be made.

You can ssh to system and type "cp /etc/bin/cgminer /etc/bin/cgminer.good" in 1.3.49, then do sw upgrade, then ssh and type "cp /etc/bin/cgminer.good /etc/bin/cgminer". But this will make your cgminer "non upgradable" in the future so you will have to factory reset once the issue is resolved.

This is how unionfs works, you can google about unionfs if you want. Our /etc is under unionfs.

[Minor Miner]

how do we know when our order ships or is about to ship?

[jonnybravo0311]

Ok, Con knows of the issue, it will be fixed soon.
For now use previous version for p2p.

Did the 1.4.2 firmware update do something to disable mining on p2pool?  I have updated, and now my SP10 will not connect to ANY p2pool node.  I can connect to Eligius, BTCGuild, GHash, etc.  My local p2pool node?  No.  Any other p2pool node?  No.  Before anyone asks... yes, my local node is up.  I can confirm this because my 2 S1s are happily hashing away on it.  I have also pointed those two to another p2pool node and they hashed there as well.

Thanks for the help.

Thanks Zvisha.  I tried 1.4.3, and it also does not see any p2pool node.  I'll go back to 1.3.49 until a fix can be made.

You can ssh to system and type "cp /etc/bin/cgminer /etc/bin/cgminer.good" in 1.3.49, then do sw upgrade, then ssh and type "cp /etc/bin/cgminer.good /etc/bin/cgminer". But this will make your cgminer "non upgradable" in the future so you will have to factory reset once the issue is resolved.

This is how unionfs works, you can google about unionfs if you want. Our /etc is under unionfs.

To make my cgminer "upgradable" could I do this:

Code:

ssh root@my.miner.ip.address
cp /etc/bin/cgminer /etc/bin/cgminer.1.3.49
upgrade to 1.4.3
cp /etc/bin/cgminer /etc/bin/cgminer.1.4.3
cp /etc/bin/cgminer.1.3.49 /etc/bin/cgminer

Then, when the next firmware version comes out that addresses the p2pool issue do this:

Code:

ssh root@my.miner.ip.address
cp /etc/bin/cgminer /etc/bin/cgminer.1.3.49
cp /etc/bin/cgminer.1.4.3 /etc/bin/cgminer
upgrade to 1.x.x

So, I'd have to "proper" version of cgminer when I do the upgrade?

[zvisha]

Ok, Con knows of the issue, it will be fixed soon.
For now use previous version for p2p.

Did the 1.4.2 firmware update do something to disable mining on p2pool?  I have updated, and now my SP10 will not connect to ANY p2pool node.  I can connect to Eligius, BTCGuild, GHash, etc.  My local p2pool node?  No.  Any other p2pool node?  No.  Before anyone asks... yes, my local node is up.  I can confirm this because my 2 S1s are happily hashing away on it.  I have also pointed those two to another p2pool node and they hashed there as well.

Thanks for the help.

Thanks Zvisha.  I tried 1.4.3, and it also does not see any p2pool node.  I'll go back to 1.3.49 until a fix can be made.

You can ssh to system and type "cp /etc/bin/cgminer /etc/bin/cgminer.good" in 1.3.49, then do sw upgrade, then ssh and type "cp /etc/bin/cgminer.good /etc/bin/cgminer". But this will make your cgminer "non upgradable" in the future so you will have to factory reset once the issue is resolved.

This is how unionfs works, you can google about unionfs if you want. Our /etc is under unionfs.

To make my cgminer "upgradable" could I do this:

Code:

ssh root@my.miner.ip.address
cp /etc/bin/cgminer /etc/bin/cgminer.1.3.49
upgrade to 1.4.3
cp /etc/bin/cgminer /etc/bin/cgminer.1.4.3
cp /etc/bin/cgminer.1.3.49 /etc/bin/cgminer

Then, when the next firmware version comes out that addresses the p2pool issue do this:

Code:

ssh root@my.miner.ip.address
cp /etc/bin/cgminer /etc/bin/cgminer.1.3.49
cp /etc/bin/cgminer.1.4.3 /etc/bin/cgminer
upgrade to 1.x.x

So, I'd have to "proper" version of cgminer when I do the upgrade?

If we have "touch" in image it is enough to "touch /etc/bin/cgminer" to make it unupgradable.
To make it upgradable again you have to do "rm /mnt/config/etc/bin/cgminer".

[jonnybravo0311]

Gotcha.  Thanks

[letuslook]

Hi Spondoolies-Tech,

Do you have an estimate about when you have the SP10 back in stock?

~ Luc

[raskul]

Hi Spondoolies-Tech,

Do you have an estimate about when you have the SP10 back in stock?

~ Luc

It's not. June is final build.

[RoadStress]

Hi Spondoolies-Tech,

Do you have an estimate about when you have the SP10 back in stock?

~ Luc

No more SP10s. The future is SP30!

[raskul]

Hi Spondoolies-Tech,

Do you have an estimate about when you have the SP10 back in stock?

~ Luc

No more SP10s. The future is SP30!

To infinty and beyond!

[tzortz]

So, what are we buying until then?

[letuslook]

Everyone please watch out, just got a scam pm from Spoondoolies-Tech.
https://bitcointalk.org/index.php?action=profile;u=342894

Scam PM from Spoondoolies-Tech below:

Hi,

We currently have a limited number of units ready for immediate despatch due to an order cancellation (6 units)

Current price including free express shipping is 4.14 BTC per unit.

Should you wish to order any units our payment address is -

1H6N1dDab7gZuSz6mvYXpYLmwYzu1Yko16

After payment please pm me the transaction I.D and your shipping address.

Please note these remaining units are sticktly on a first come first served basis.

Thanks,

Spondoolies-Tech

[Marvell1]

So, what are we buying until then?

Pre Order sp30 I imagine , If i had the power here i would try and host 2

[tzortz]

I have preordered 10x SP30.

I want something in hand.

[RoadStress]

So, what are we buying until then?

My hand itches too to buy something when the BTC is over 600!

Everyone please watch out, just got a scam pm from Spoondoolies-Tech.
https://bitcointalk.org/index.php?action=profile;u=342894

Scam PM from Spoondoolies-Tech below:

Hi,

We currently have a limited number of units ready for immediate despatch due to an order cancellation (6 units)

Current price including free express shipping is 4.14 BTC per unit.

Should you wish to order any units our payment address is -

1H6N1dDab7gZuSz6mvYXpYLmwYzu1Yko16

After payment please pm me the transaction I.D and your shipping address.

Please note these remaining units are sticktly on a first come first served basis.

Thanks,

Spondoolies-Tech

Reported to the mods. Thank you.

[Biodom]

So, what are we buying until then?

My hand itches too to buy something when the BTC is over 600!

Boom-and it is at $562 (9.6 BTC instead of <8.00)
Edit: $551