edit: Not LCDstats, Piminer
So what I'm doing is trying to get LCDstats to work. Apparently doing installing python before I install lcdstats isn't doing the trick.
After I run the python install you gave me it does it's thing then I run the commands to install lcdstats... Here's what I get.
[minepeon@minepeon ~]$ cd ~/
[minepeon@minepeon ~]$ rm -rf minepeon-plugin-PiMiner
[minepeon@minepeon ~]$ git clone
https://github.com/MineForeman/minepeon-plugin-PiMiner.gitCloning into 'minepeon-plugin-PiMiner'...
remote: Reusing existing pack: 138, done.
remote: Total 138 (delta 0), reused 0 (delta 0)
Receiving objects: 100% (138/138), 91.91 KiB | 0 bytes/s, done.
Resolving deltas: 100% (34/34), done.
Checking connectivity... done.
[minepeon@minepeon ~]$ cd minepeon-plugin-PiMiner
[minepeon@minepeon minepeon-plugin-PiMiner]$ ./install.sh
_
(_)
_ __ ___ _ _ __ ___ _ __ ___ ___ _ __
| _ _ \| | _ \ / _ \ _ \ / _ \/ _ \| _ \
| | | | | | | | | | __/ |_) | __/ (_) | | | |
|_| |_| |_|_|_| |_|\___| __/ \___|\___/|_| |_|
| |
|_|
This will install the PiMiner LCD plugin for your MinePeon
it will require sudo access to install the service and ask
you for your password
You will need an Adafruit 16x2 LCD+Keypad Kit for Raspberry Pi
avalible from
http://www.adafruit.com/. The origional code and
libraries are availible from
https://github.com/adafruit/PiMinerand
https://github.com/adafruit/Adafruit-Raspberry-Pi-Python-CodeOnce it is going you will need to adjust the potentiometer
(the thing between the chip and the buttons) to adjust the
contrast. (Thank 6010fd12 for that tip)
Are you sure? [y/n]y
[sudo] password for minepeon:
ln -s '/usr/lib/systemd/system/piminer.service' '/etc/systemd/system/multi-user.target.wants/piminer.service'
[minepeon@minepeon minepeon-plugin-PiMiner]$
Any ideas or is LCDstats just not working with this version right now?