percy_tc
|
|
March 07, 2020, 04:36:17 PM |
|
if your win10 file doesn’t fit a dag file in a 470 4 GB card, restart the PC without a connected monitor. A few epoch can be done.
There is no problem with AMD 4GB at all. From DAG #380 it will be a problem (about nov/dec.)
|
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
March 10, 2020, 11:48:16 AM Last edit: March 10, 2020, 12:11:10 PM by RAKOT |
|
Hello again friends! Long time ago noticed that fanmin ontion dont work. It wasnt problem cause i put big FAN toward the rig and its fine. But..... now i decided to solve this question. Tested on rx 470 570 480 . Same thing. Win10 , diffeent drivers, different CM. Anyone had this issue ? P.S. Got cooler MSI RX 480 . With undervolting it stays under 60 deg. and fans go on go off , go on go off. And so on....... Not happy Any ideas ? Notised its about MSI's . Other GPU's like Giga, Sapphire , HIS works fine with fanmin.
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
March 11, 2020, 02:56:09 AM |
|
Hello again friends! Long time ago noticed that fanmin ontion dont work. It wasnt problem cause i put big FAN toward the rig and its fine. But..... now i decided to solve this question. Tested on rx 470 570 480 . Same thing. Win10 , diffeent drivers, different CM. Anyone had this issue ? P.S. Got cooler MSI RX 480 . With undervolting it stays under 60 deg. and fans go on go off , go on go off. And so on....... Not happy Any ideas ? Notised its about MSI's . Other GPU's like Giga, Sapphire , HIS works fine with fanmin. MSI uses slow and big fans...try higher value for fanmin, double than you wanted
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
March 11, 2020, 06:13:14 AM |
|
Hello People!
WTF is that ?
DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining. Cannot resolve 'etc-eu1.nanopool.org' ETH: Stratum - Cannot connect to etc-eu1.nanopool.org:19999 DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...
2 rigs shows it
P.S. Worker digs also at etc-eu1.nanopool.org:19999 and works fine.
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
March 11, 2020, 06:17:40 AM Last edit: March 11, 2020, 06:35:35 AM by RAKOT |
|
Hello again friends! Long time ago noticed that fanmin ontion dont work. It wasnt problem cause i put big FAN toward the rig and its fine. But..... now i decided to solve this question. Tested on rx 470 570 480 . Same thing. Win10 , diffeent drivers, different CM. Anyone had this issue ? P.S. Got cooler MSI RX 480 . With undervolting it stays under 60 deg. and fans go on go off , go on go off. And so on....... Not happy Any ideas ? Notised its about MSI's . Other GPU's like Giga, Sapphire , HIS works fine with fanmin. MSI uses slow and big fans...try higher value for fanmin, double than you wanted Well, checked that. Now then GPUs needs to cool down from 0 fanspeed, it starts to run at fanmin . Then go off again at 59C temp. So fanmin works somehow on MSIs, but not as desired. P.S. Wolkthrou is to disable ZeroRPM in Drivers option. But fans starts to spin at not wanted speed like 40-60% . Well, good for now but Claymore should do someth. with that. He takes fee for his soft.
|
|
|
|
xandry
Staff
Legendary
Offline
Activity: 3612
Merit: 4437
Crypto Swap Exchange
|
|
March 11, 2020, 07:56:53 AM |
|
Anyone know what wrong with Minerpoolhub? 2-3 days ago cannot connect to server. ETH: Stratum - Cannot connect to asia.ethash-hub.miningpoolhub.com:20535 DevFee: ETH: Stratum - Failed to connect, retry in 20 sec... ETH: Stratum - Cannot connect to asia.ethash-hub.miningpoolhub.com:20535 ETH: Stratum - Failed to connect, retry in 20 sec... DevFee: ETH: Stratum - connecting to 'asia.ethash-hub.miningpoolhub.com' <185.53 .91.60> port 20535 (SSL/TLS) ETH: Stratum - connecting to 'asia.ethash-hub.miningpoolhub.com' <185.53.91.60> port 20535 (unsecure) Just try to switch to another one host: us-east.ethash-hub.miningpoolhub.com or europe.ethash-hub.miningpoolhub.com The best place to ask such questions is their topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
March 11, 2020, 10:59:20 AM |
|
Hello again friends! Long time ago noticed that fanmin ontion dont work. It wasnt problem cause i put big FAN toward the rig and its fine. But..... now i decided to solve this question. Tested on rx 470 570 480 . Same thing. Win10 , diffeent drivers, different CM. Anyone had this issue ? P.S. Got cooler MSI RX 480 . With undervolting it stays under 60 deg. and fans go on go off , go on go off. And so on....... Not happy Any ideas ? Notised its about MSI's . Other GPU's like Giga, Sapphire , HIS works fine with fanmin. MSI uses slow and big fans...try higher value for fanmin, double than you wanted Well, checked that. Now then GPUs needs to cool down from 0 fanspeed, it starts to run at fanmin . Then go off again at 59C temp. So fanmin works somehow on MSIs, but not as desired. P.S. Wolkthrou is to disable ZeroRPM in Drivers option. But fans starts to spin at not wanted speed like 40-60% . Well, good for now but Claymore should do someth. with that. He takes fee for his soft. PS2: Checked with other famous miner ( well you know). fanmin works ( so its not driver issue). Mr. Claymore , do something.
|
|
|
|
Binary100100
Member
Offline
Activity: 180
Merit: 10
|
|
March 11, 2020, 12:05:15 PM |
|
PS2: Checked with other famous miner ( well you know). fanmin works ( so its not driver issue). Mr. Claymore , do something.
Claymore hasn't even logged on in 4 months. I doubt he'll log on just to respond to you. I suggest that you just move on with the "other famous miner" software. Sorry.
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
March 11, 2020, 12:23:21 PM Last edit: March 11, 2020, 02:44:09 PM by RAKOT |
|
PS2: Checked with other famous miner ( well you know). fanmin works ( so its not driver issue). Mr. Claymore , do something.
Claymore hasn't even logged on in 4 months. I doubt he'll log on just to respond to you. I suggest that you just move on with the "other famous miner" software. Sorry. Pity.
|
|
|
|
echo00114
Member
Offline
Activity: 72
Merit: 10
|
|
March 11, 2020, 01:11:06 PM Last edit: March 11, 2020, 01:31:04 PM by echo00114 |
|
hi i have a wierd problem and i cant fix it a try everything change riser and card the problem not solved reinstall driver setting everithing again
the problem the gpu 0 is not mining 0.100-1.1 mhs the speed only wierd thing the gpu0 dag creation time 27700 ms, other card aprox 8000 ms and all time gpu 0 setting last, the miner
asrock btc h 81 2.0 8 gb ram 5x rx 470 4 gb sapphire riser etc.
two rig same problem i use dummy plug gpu 0
i try without oc not working
oh i mine etc only
thank you
|
|
|
|
Binary100100
Member
Offline
Activity: 180
Merit: 10
|
|
March 11, 2020, 01:36:55 PM |
|
hi i have a wierd problem and i cant fix it a try everything change riser and card the problem not solved reinstall driver setting everithing again
the problem the gpu 0 is not mining 0.100-1.1 mhs the speed only wierd thing the gpu0 dag creation time 27700 ms, other card aprox 8000 ms and all time gpu 0 setting last, the miner
asrock btc h 81 2.0 8 gb ram 5x rx 470 4 gb sapphire riser etc.
two rig same problem i use dummy plug gpu 0
i try without oc not working
oh i mine etc only
thank you
How can you still mine with 4gb cards? I thought that dag was at least 3.51gb now? Unless you're using an OS other than Windows.
|
|
|
|
RuMiner
Member
Offline
Activity: 168
Merit: 15
|
|
March 12, 2020, 08:12:00 AM Last edit: March 12, 2020, 08:35:18 AM by RuMiner |
|
@Claymore, something is happening with DevFee since DwarfPool is closed. How can you still mine with 4gb cards? I thought that dag was at least 3.51gb now? Unless you're using an OS other than Windows. I ran tests with different epoch numbers using -benchmark #epoch option. ETH on Windows 10 with 4 Gb card will die ~ in july
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
March 12, 2020, 03:55:32 PM |
|
DWARFPOOL CLOSING AFFECTS HASH RATE-- When it is time for devfee, there is no possible DwarfPool login. This , I believe, affects miner performance. My 1080ti was solid at ~50MH/s until this occurred. Now, it mines 5-7 MH/s less. @CLAYMORE , any plans to work this over in your code? --scryptr @Claymore, something is happening with DevFee since DwarfPool is closed. How can you still mine with 4gb cards? I thought that dag was at least 3.51gb now? Unless you're using an OS other than Windows. I ran tests with different epoch numbers using -benchmark #epoch option. ETH on Windows 10 with 4 Gb card will die ~ in july
|
|
|
|
big_daddy
|
|
March 13, 2020, 11:17:11 AM |
|
@Claymore, something is happening with DevFee since DwarfPool is closed. How can you still mine with 4gb cards? I thought that dag was at least 3.51gb now? Unless you're using an OS other than Windows. I ran tests with different epoch numbers using -benchmark #epoch option. ETH on Windows 10 with 4 Gb card will die ~ in july You will be able to run 4gb cards on eth using linux approx to the end of this year, but we are waiting for the prognpow right? So there will be some changes regarding those news And the 4gb cards at the end of the mining era on eth will be able to mine some other algo, so, I’m not worried at all
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
RuMiner
Member
Offline
Activity: 168
Merit: 15
|
|
March 13, 2020, 06:14:29 PM |
|
You will be able to run 4gb cards on eth using linux approx to the end of this year, but we are waiting for the prognpow right? So there will be some changes regarding those news And the 4gb cards at the end of the mining era on eth will be able to mine some other algo, so, I’m not worried at all I wish Mr @Claymore make best ProgPow miner )
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
March 13, 2020, 11:03:29 PM |
|
PROGPOW USES THE SAME DAG FILE AS THE CURRENT DAG FILE-- For ETH mining, the DAG file will be unchanged even if the Ethereum project switches to ProgPoW. ProgPoW was derived from the ETH algorithm, and the DAG file will be continued if and when ProgPoW becomes the ETH algorithm after an approved fork. --scryptr You will be able to run 4gb cards on eth using linux approx to the end of this year, but we are waiting for the prognpow right? So there will be some changes regarding those news And the 4gb cards at the end of the mining era on eth will be able to mine some other algo, so, I’m not worried at all I wish Mr @Claymore make best ProgPow miner )
|
|
|
|
peteycamey
Legendary
Offline
Activity: 1185
Merit: 1021
|
|
March 15, 2020, 12:41:45 PM |
|
PROGPOW USES THE SAME DAG FILE AS THE CURRENT DAG FILE-- For ETH mining, the DAG file will be unchanged even if the Ethereum project switches to ProgPoW. ProgPoW was derived from the ETH algorithm, and the DAG file will be continued if and when ProgPoW becomes the ETH algorithm after an approved fork. --scryptr You will be able to run 4gb cards on eth using linux approx to the end of this year, but we are waiting for the prognpow right? So there will be some changes regarding those news And the 4gb cards at the end of the mining era on eth will be able to mine some other algo, so, I’m not worried at all I wish Mr @Claymore make best ProgPow miner ) yes but I thought the dag file would be similar to when eth first started (much smaller)
|
|
|
|
deadsix
|
|
March 16, 2020, 10:42:58 AM |
|
PROGPOW USES THE SAME DAG FILE AS THE CURRENT DAG FILE-- For ETH mining, the DAG file will be unchanged even if the Ethereum project switches to ProgPoW. ProgPoW was derived from the ETH algorithm, and the DAG file will be continued if and when ProgPoW becomes the ETH algorithm after an approved fork. --scryptr You will be able to run 4gb cards on eth using linux approx to the end of this year, but we are waiting for the prognpow right? So there will be some changes regarding those news And the 4gb cards at the end of the mining era on eth will be able to mine some other algo, so, I’m not worried at all I wish Mr @Claymore make best ProgPow miner ) yes but I thought the dag file would be similar to when eth first started (much smaller) ProgPOW does NOT have a dag file (atleast not one that is in any way similar to the Eth DAG file) and works on ALL GPU's 2GB and above. I do not know why people who do not know what ProgPOW is or how it works continue to spread misinformation on forum threads. There are test clients and solvers out there, as well as other "coins" that use ProgPOW already people, atleast do some testing if you are unsure instead of spreading misinformation.
|
|
|
|
Pe_Da
Jr. Member
Offline
Activity: 58
Merit: 5
|
|
March 16, 2020, 12:14:03 PM |
|
I´ve got so many rejected shares, caused by the not connectable Fee Server?
And by the way, is the project dead?
|
|
|
|
|