ahsbqt
Newbie
 Offline
Activity: 24
Merit: 1
|
 |
August 11, 2019, 04:54:12 PM |
|
need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
this is not a solvable problem for eth/etc. you must mining altcoin with low dag-epoh - Expanse(EXP), Ubiq(UBQ), Dubaicoin(DBIX), ect. old card 39x and 79xx decrise speed with each epoh low and low. The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os |
|
|
|
|
prostor
Newbie
Offline
Activity: 39
Merit: 0
|
|
August 12, 2019, 07:04:37 AM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h |
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1735
|
|
August 12, 2019, 08:50:24 AM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h He is actually correct, and I didn't know it either but apparently with the R9 290/390 you can mine at 30MH/s again if you do it with certain drivers, OS, and mining software. I had a similiar issue where I used to mine 30MH/s with my R9 290 since 2016 and in 2018 it started to slow down to like 20MH/s before I shut it off. I assumed it was some DAG thrashing bug and just unplugged it. However there is another thread going on in this category of mining where people were able to mine with their Hawaii GPUs again at 30MHs. However you can't do it on Windows. So search the forums if you need instructions on how to do it. But keep in mind the GPU will use at least 200 Watts of power. |
|
|
|
|
ahsbqt
Newbie
Offline
Activity: 24
Merit: 1
|
|
August 12, 2019, 12:13:06 PM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h |
|
|
|
|
prostor
Newbie
Offline
Activity: 39
Merit: 0
|
|
August 12, 2019, 01:52:58 PM |
|
|
|
|
|
|
|
UnclWish
|
|
August 12, 2019, 02:52:53 PM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h What clocks and voltages? 113W - It's unbelievable... |
|
|
|
|
|
BogdanCo
|
|
August 12, 2019, 03:45:04 PM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h What clocks and voltages? 113W - It's unbelievable... Keep in mind you have to add 30-50W for the fan's. |
|
|
|
|
ahsbqt
Newbie
Offline
Activity: 24
Merit: 1
|
|
August 12, 2019, 03:56:31 PM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h What clocks and voltages? 113W - It's unbelievable... yes it should be near 200w, but i dont have wattmeter, the temps are better in comparison with windows, 1040mhs core clock and 1100mv voltage |
|
|
|
|
|
UnclWish
|
|
August 12, 2019, 04:33:22 PM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h What clocks and voltages? 113W - It's unbelievable... yes it should be near 200w, but i dont have wattmeter, the temps are better in comparison with windows, 1040mhs core clock and 1100mv voltage Yes, 200W - real number for 390. |
|
|
|
|
|
UnclWish
|
|
August 12, 2019, 04:34:11 PM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h What clocks and voltages? 113W - It's unbelievable... Keep in mind you have to add 30-50W for the fan's. Are you kidding? 30-50W for fans? It must be real BIG fans... Fans on videocards, even if card have 3 of them, use only several watts of power. |
|
|
|
|
karim_hassan777
Newbie
Offline
Activity: 58
Merit: 0
|
|
August 12, 2019, 04:45:56 PM |
|
new driver guys Radeon Software Adrenalin Edition 19.8.1
and it mention that
Radeon Performance Metrics may report incorrect VRAM utilization.
any one try it for RX 5700 XT
|
|
|
|
|
|
BogdanCo
|
|
August 12, 2019, 05:33:23 PM |
|
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h What clocks and voltages? 113W - It's unbelievable... Keep in mind you have to add 30-50W for the fan's. Are you kidding? 30-50W for fans? It must be real BIG fans... Fans on videocards, even if card have 3 of them, use only several watts of power. Use a kill-a-watt and convince yourself  |
|
|
|
|
|
bitcoin-shark
|
|
August 12, 2019, 07:53:24 PM |
|
could i get some help, a guide on how to use the tool inside the program to overclock the amd graphic card?...
|
|
|
|
aygabtu
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 12, 2019, 09:15:18 PM |
|
I have 12 Radeon VII's and switched from v12 to v14.7 and really see no difference. What am I missing?
|
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1806
Merit: 1520
|
|
August 12, 2019, 09:23:25 PM |
|
I have 12 Radeon VII's and switched from v12 to v14.7 and really see no difference. What am I missing?
Most of the improved stuff ain't felt (as it has all improved at the back-end), until and unless you actually do use one of the newly introduced features (such as the -showpower command). Plus, there hasn't been a major "hashrate increase" since the v12 anyways. |
|
|
|
|
NefariousFool
Jr. Member
Offline
Activity: 36
Merit: 7
|
|
August 13, 2019, 01:55:16 PM |
|
I have 12 Radeon VII's and switched from v12 to v14.7 and really see no difference. What am I missing?
Most of the improved stuff ain't felt (as it has all improved at the back-end), until and unless you actually do use one of the newly introduced features (such as the -showpower command). Plus, there hasn't been a major "hashrate increase" since the v12 anyways. i begvto argue there. i mean 29to 31 mhs to 33 to 34 mhs i guess isntvTGAT major, but power is reduced for that, plus on vegas going from 37/39 to 42 to 50 depending on lottery isnt technically much? . idunno. i think you're expecting more? |
|
|
|
|
webgkv
Newbie
Offline
Activity: 57
Merit: 0
|
|
August 13, 2019, 02:36:25 PM
Last edit: August 13, 2019, 06:38:15 PM by webgkv |
|
I will release v14.8 within a few days, it will set environment variables automatically too, right now you can use b747 if you have problems with DAG on 4GB AMD cards.
Hi! Can we expect in v14.8 straps for linux? Is this even possible? |
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
August 13, 2019, 11:12:05 PM |
|
I assume @Claymore will let us know if the 19.8.1 driver just released fixes the DAG issue he's mentioned that's holding back the Navi cards.
|
|
|
|
|
ManDoneKTM
Newbie
Offline
Activity: 150
Merit: 0
|
|
August 14, 2019, 02:31:40 AM |
|
I assume @Claymore will let us know if the 19.8.1 driver just released fixes the DAG issue he's mentioned that's holding back the Navi cards.
It doesn't fix the TLB problem with RX5700 (Navi) |
|
|
|
|
nn47nn
Newbie
Offline
Activity: 19
Merit: 0
|
|
August 14, 2019, 10:26:35 AM |
|
I will release v14.8 within a few days, it will set environment variables automatically too, right now you can use b747 if you have problems with DAG on 4GB AMD cards.
Hi! Can we expect in v14.8 straps for linux? Is this even possible? cannot solve its long-standing DAG file problem, so the release is so long |
|
|
|
|
|
